EC21AFA-512-STD - LTE Cat 1 M2M Module | Quectel
料号： EC21AFA-512-STD ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
EC21AFA-512-STD 概述
An LTE Cat 1 module is a category of LTE UE device class defined for low-cost, low-power machine-type communication. Within the wireless connectivity hierarchy (cellular module -> RF transceiver module -> wireless communication device), Cat 1 sits above Cat M1/NB-IoT in throughput but below Cat 4 and higher, making it the traditional choice for 2G/3G sunset migrations where a full-speed LTE fallback to WCDMA is required without the cost of higher LTE categories.
Key features include cost-effective LTE Cat 1 connectivity with downlink speeds up to 10 Mbps, integrated WCDMA fallback for coverage resilience, and on-module memory comprising 4 Gbit ROM and 2 Gbit RAM, which supports embedded applications and firmware headroom. Because the antenna is external, designers retain full flexibility in antenna selection and placement for optimal RF performance in enclosures.
The EC21 series architecture integrates the cellular modem, baseband, RF transceiver, and memory into a single LCC-style castellated package designed for reflow soldering onto the host PCB, a pattern common across Quectel's EC2x family, which simplifies layout reuse across family members.
Typical applications include telematics and fleet tracking units, smart metering and utility gateways, industrial routers and DTUs, security and alarm panels, and POS terminals - all scenarios where reliable mid-rate cellular data and long product lifecycles matter more than peak throughput.
A key design consideration is thermal and RF layout: the module must be placed with adequate ground plane and the external antenna matched per the carrier band plan for the North America variant; power supply sequencing and a stable 3.3-4.2 V rail with sufficient burst current are critical for LTE transmit bursts.
This page synthesizes distributor availability from DigiKey, Mouser, Arrow, Avnet and Octopart, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Pricing shown requires quotation; verify current stock and lead time before ordering.
直接替换替代料： EC21AFA-512-STD ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
快速对比工具——选择替代料号进行并排对比：
EC21AFA-128-STD
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
EC21AFD-512-STD
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
EC21AUT-512-STD
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
EC21AFR-512-STD
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
EC21AFA-512-MINIPCIE
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
EC21AFA-512-STD 规格参数
| Product Series | Quectel EC21 (LTE Cat 1) |
| Technology | LTE Cat 1 with WCDMA (3G) fallback |
| Maximum Downlink Data Rate | 10 Mbps |
| Regional Variant | North America |
| Memory Configuration | 4 Gbit ROM + 2 Gbit RAM |
| Antenna | External (antenna not included) |
| Package Style | Card edge (LCC-type), surface mount |
| 安装类型 | Surface Mount (SMD, reflow soldering) |
| Application Target | M2M and IoT |
EC21AFA-512-STD card edge (lcc-type), surface mount 引脚配置指南
EC21AFA-512-STD（card edge (lcc-type), surface mount 封装）的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据： EC21AFA-512-STD.
请参阅 数据手册 以查看完整引脚配置。
典型应用
EC21AFA-512-STD 适用于 6 应用s: Fleet Telematics and Asset Tracking, Smart Metering and Utility Gateways, Industrial Routers and DTUs, Security and Alarm Panels, Payment Terminals and POS, IoT Gateways and Smart City Infrastructure.
Fleet Telematics and Asset Tracking
The EC21AFA-512-STD fits fleet telematics because LTE Cat 1's 10 Mbps downlink comfortably carries continuous GPS position reporting, driver-facing data, and over-the-air firmware updates, while the WCDMA fallback keeps units connected during route gaps in LTE coverage. Its North America band plan aligns with major US and Canadian carriers, simplifying certification. The external-antenna architecture lets integrators mount a roof antenna for superior urban and rural link margins compared to internal chip antennas. Power design should budget for LTE burst currents on a stable rail; the 4 Gbit ROM / 2 Gbit RAM memory supports buffering telemetry during coverage loss and resynchronizing once the link recovers.
推荐
Smart Metering and Utility Gateways
Utility metering and distribution-automation gateways need reliable, low-cost, long-lifecycle cellular data rather than peak throughput, which is exactly the EC21AFA-512-STD profile: LTE Cat 1 at up to 10 Mbps with 3G fallback, at commodity module cost. The on-module 4 Gbit ROM and 2 Gbit RAM run embedded TCP/IP stacks and local aggregation logic without an external processor memory upgrade. The surface-mount card-edge package supports automated assembly on meter PCBs, and the external antenna allows the RF path to be routed to a meter-enclosure antenna optimized for the North America LTE bands. Designers should verify the module's operating temperature rating against outdoor enclosure conditions in the datasheet.
推荐
Industrial Routers and DTUs
Data transfer units (DTUs) and industrial cellular routers use the EC21AFA-512-STD as their WAN engine: Cat 1's 10 Mbps downlink serves SCADA polling, Modbus/TCP bridging, and cloud telemetry, while WCDMA fallback maintains connectivity during LTE outages. The module's memory configuration supports always-on PPP/NDIS sessions, and the external antenna interface accommodates panel or DIN-rail antennas placed outside metal control cabinets, which is essential for signal integrity in factory environments. The reflow-solderable card-edge package withstands industrial assembly and vibration better than pigtail-based designs. Budget the power supply for LTE transmit bursts and verify the supply voltage range against the datasheet before finalizing the 4 V-class rail.
推荐
Security and Alarm Panels
Alarm and security panels require a cellular communicator that reliably delivers events, video clips, and cloud heartbeats at moderate bandwidth - the EC21AFA-512-STD's up-to-10 Mbps Cat 1 link handles this, with WCDMA fallback covering sites where LTE coverage is weak. UL-listed communicator designs benefit from the module's surface-mount card-edge format, which integrates directly onto the communicator board, and the external antenna allows the RF element to sit in the panel's plastic housing for best radiated performance in North American bands. The 4 Gbit ROM plus 2 Gbit RAM runs TLS-secured cloud connections locally. Confirm the module's power-down and standby behavior in the datasheet when designing battery-backed operation.
推荐
Payment Terminals and POS
Mobile point-of-sale terminals need certified North America cellular connectivity with enough bandwidth for encrypted transactions, receipts, and occasional firmware updates - well within the EC21AFA-512-STD's 10 Mbps Cat 1 envelope, at a module cost point that suits high-volume terminal production. The module's memory configuration supports secure TLS sessions without external assistance, and the external-antenna design lets terminal enclosures place the antenna away from the EM-noisy printer and display sections. The reflow-mounted card-edge package survives the repeated handling and thermal cycling of handheld devices. Pay attention to power-rail burst-current provisioning during LTE transmissions to avoid brownouts during transaction submission.
推荐
IoT Gateways and Smart City Infrastructure
Smart-city nodes - parking sensors, environmental monitors, digital-signage controllers, and streetlight controllers - aggregate many low-rate sensor streams into cellular backhaul, a duty the EC21AFA-512-STD serves with its up-to-10 Mbps LTE Cat 1 link and WCDMA fallback. The North America band plan and commodity cost make it a default choice for municipal deployments with long service commitments. Its on-module 4 Gbit ROM and 2 Gbit RAM buffer data during outages, and the external antenna supports the pole- or enclosure-mounted antennas typical of outdoor infrastructure. The surface-mount card-edge package enables conformal-coated, conformally-sealed gateway boards. Verify operating-temperature and voltage ratings in the manufacturer datasheet for unconditioned outdoor enclosures.
推荐
推荐产品汇总
工程参考数据： EC21AFA-512-STD ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EC21AFA-128-STD | EC21AFD-512-STD | EC21AUT-512-STD | EC21AFR-512-STD |
|---|---|---|---|---|---|
| Package | Card edge (LCC-type), surface mount | Card edge (LCC-type) - same | Card edge (LCC-type) - same | Card edge (LCC-type) - same | Card edge (LCC-type) - same |
| Brand | Quectel | Quectel | Quectel | Quectel | Quectel |
| LTE Category | Cat 1 | Cat 1 | Cat 1 | Cat 1 | Cat 1 |
| Max Downlink Rate | 10 Mbps | 10 Mbps | 10 Mbps | 10 Mbps | 10 Mbps |
| Fallback Network | WCDMA (3G) | WCDMA (3G) | WCDMA (3G) | WCDMA (3G) | WCDMA (3G) |
| Antenna | External (not included) | External | External | External | External |
关键差异点
- Cost-optimized LTE Cat 1 class （对比 EC25-AF)
- WCDMA 3G fallback included （对比 EC21AFD-512-STD)
- Large on-module memory tier （对比 EC21AFA-128-STD)
设计说明
LTE transmit bursts draw significant pulse current. Estimated: LTE modules of this class typically specify burst currents on the order of 0.5-2 A during transmission; design the 3.3-4.2 V-class supply rail with low-ESR bulk capacitance (for example 100 uF or more near the module VBAT pins) and verify the exact value against the EC21 hardware design guide. Undersized rails cause brownout resets that appear as intermittent network drops in the field, so validate with current probes during transmit.
Place the module with a continuous ground plane beneath it per Quectel's EC21 hardware design guide, keep the RF trace to the antenna connector at 50 ohms with a matching network accessible for VNA tuning, and route USB/UART lines away from the RF path. The castellated card-edge pads are designed for reflow soldering - use the recommended stencil aperture and paste volume to avoid bridging on the fine-pitch edge pads during assembly.
The EC21AFA-512-STD includes no antenna - forgetting the external antenna yields drastically reduced range or no registration at all. Second, regional variants matter: this AFA part is the North America version, and deploying it on European or Asian carrier bands will fail certification. Third, cellular modules require carrier/regulatory certification of the final device; plan certification time and confirm the exact memory suffix (512) matches your firmware image requirements before locking the BOM.
合规信息
Compliance status not stated in the verified web data compiled on 2026-10-20; obtain RoHS/REACH declarations from Quectel or the authorized distributor.
