EFM32ZG110F16-B-QFN24 - 24MHz Cortex-M0+ MCU | Silicon Labs
MPN: EFM32ZG110F16-B-QFN24 ✓ Hoạt độngEFM32ZG110F16-B-QFN24 Tóm tắt
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals such as timers, serial interfaces, and analog functions on one package. The EFM32 Zero Gecko family belongs to the hierarchy of embedded MCU, 32-bit microcontroller, ARM Cortex-M microcontroller, and energy-efficient semiconductor. Its low-power platform is particularly useful for battery-powered equipment that spends much of its operating time in an energy-saving state.
Key features include an ARM Cortex-M0+ core operating at up to 24 MHz, 16 KB of Flash, 4 KB of RAM, 17 digital I/O pins, and two 16-bit timers. The manufacturer describes the family as offering low-power consumption, fast wake-up from energy-saving modes, and energy-saving operating modes. The 24-QFN package also provides a compact surface-mount footprint for compact industrial, sensing, and connected embedded products.
The target B-qualified ordering code is associated with the same EFM32ZG110F16 device family represented by EFM32ZG110F16-QFN24 on the manufacturer product page. Silicon Labs describes this MCU as suitable for energy-sensitive applications, while the target listing identifies 24 MHz operation, 16 KB Flash, and a 24-QFN 5 x 5 mm package. Detailed peripheral assignments and absolute electrical limits should be confirmed against the appropriate package and ordering-code table in the manufacturer datasheet.
Typical uses include smart metering, gas and water monitoring, compact sensor nodes, low-power industrial controls, and connected embedded products. The 16 KB Flash and 4 KB RAM support small control tasks without requiring a larger MCU, while two 16-bit timers help with periodic sampling and timing functions. Fast wake-up behavior can reduce the effective response delay after a low-power interval.
PCB design should preserve the exposed-pad thermal and electrical requirements of the QFN package, place decoupling close to the supply pins, and route sensitive analog or communications signals away from switching nodes. Firmware developers should confirm pin multiplexing, peripheral availability, debug access, and power-management behavior against the datasheet pinout and device-specific configuration tables.
This page combines manufacturer specifications, practical design guidance, application fit, and verified drop-in comparison criteria to support component selection and PCB planning. It also distinguishes electrical alternatives from ordering-code variants so engineers can identify changes in memory capacity, processor core, package, or programming requirements before committing a design to production.
Bộ thay thế dễ dàng lắp đặt cho EFM32ZG110F16-B-QFN24 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
EFM32ZG110F16-QFN24
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
EFM32ZG110F16-B-QFN24 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Product Family | EFM32 Zero Gecko |
| Maximum CPU Frequency | 24 MHz |
| Flash Memory | 16 KB |
| Flash Organization | 16K x 8 |
| RAM | 4 KB |
| Digital I/O Pins | 17 |
| Timer Count | 2 |
| Timer Resolution | 16-bit |
| Processor Core | ARM Cortex-M0+ |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Hộp | 24-QFN, 5 x 5 mm |
| Kiểu lắp đặt | Surface mount |
| Low-Power Sleep Current | 0.5 uA |
| Run Current | 114 uA/MHz |
Hướng dẫn cấu hình chân EFM32ZG110F16-B-QFN24 24-qfn, 5 x 5 mm
Cấu hình chân cho EFM32ZG110F16-B-QFN24 (24-qfn, 5 x 5 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho EFM32ZG110F16-B-QFN24.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
EFM32ZG110F16-B-QFN24 phù hợp cho 6 Áp dụngs: Smart Gas Metering, Water Monitoring Node, Industrial Sensor Interface, Energy-Sensitive IoT Device, Low-Power Environmental Monitor, Compact Control Module.
Smart Gas Metering
The EFM32ZG110F16-B-QFN24 fits compact gas-metering electronics that periodically measure a sensor, evaluate thresholds, and update a measurement record. Its 24 MHz ARM Cortex-M0+ core provides sufficient control capability while the 16 KB Flash and 4 KB RAM suit a focused firmware image. Two 16-bit timers support periodic sampling and timeout functions, and sleep current down to 0.5 uA helps limit standby consumption. The 24-QFN 5 x 5 mm package also reduces board area, although designers should follow the exposed-pad and decoupling guidance in the manufacturer datasheet.
Được đề xuất
Water Monitoring Node
The EFM32ZG110F16-B-QFN24 is appropriate for battery-operated water-monitoring nodes that sample a flow or level sensor and communicate intermittently. The ARM Cortex-M0+ processor runs up to 24 MHz, while 4 KB of RAM can support acquisition and control tasks and 16 KB of Flash can hold compact application code. The family's 0.5 uA sleep-mode figure and fast wake-up behavior help preserve battery life between measurements. The 1.98 V to 3.8 V supply range fits low-voltage designs, but the final regulator and analog front end must preserve accurate sensing and a stable MCU supply.
Được đề xuất
Industrial Sensor Interface
The EFM32ZG110F16-B-QFN24 can serve as the local controller in a compact industrial sensor interface that converts analog or digital sensor information into a processed measurement. Its 24 MHz Cortex-M0+ core supports responsive control logic, and its two 16-bit timers can organize acquisition intervals, motor timing, or communication timeouts. The 16 KB Flash and 4 KB RAM are sufficient for embedded control rather than high-end analytics. Its 24-QFN 5 x 5 mm package supports dense instrumentation, while low-power operation and fast wake-up help satisfy duty-cycle requirements in remote installations.
Được đề xuất
Energy-Sensitive IoT Device
The EFM32ZG110F16-B-QFN24 fits energy-sensitive IoT devices that wake briefly to sample inputs, process local decisions, and return to a low-power state. Sleep current down to 0.5 uA and run consumption of 114 uA/MHz provide a useful starting point for average-current budgeting. The 24 MHz Cortex-M0+ core has adequate throughput for protocol handling and local logic, while the 4 KB RAM and 16 KB Flash favor compact applications. Choose external radio and sensor parts for their own current budgets, and confirm that all board leakage is included in the final power calculation.
Được đề xuất
Low-Power Environmental Monitor
The EFM32ZG110F16-B-QFN24 supports environmental monitoring products that periodically measure temperature, humidity, gas, or water quality and apply local thresholds. Its 16 KB Flash and 4 KB RAM allow a compact control program, while two 16-bit timers provide repeatable intervals for sampling and housekeeping. Fast wake-up behavior helps reduce latency in duty-cycled operation, and the 24-QFN package fits small instrument housings. The MCU's 1.98 V to 3.8 V operating range must be reconciled with sensor requirements, and analog precision should not be inferred solely from the processor specification.
Được đề xuất
Compact Control Module
The EFM32ZG110F16-B-QFN24 can serve as the controller in a compact programmable module where a complete control loop, communication service, and local storage must coexist in a small footprint. Its 24 MHz ARM Cortex-M0+ processor, 16 KB Flash, and 4 KB RAM support modest embedded workloads without requiring a larger package. Two 16-bit timers provide deterministic timing foundations, and the low-power platform supports systems that spend significant time idle. Module designers should provide stable local decoupling, route communications away from sensitive timing circuits, and verify exposed-pad layout before high-volume assembly.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EFM32ZG110F16-B-QFN24 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EFM32ZG110F16-QFN24 |
|---|---|---|
| Brand | Silicon Labs | Silicon Labs |
| Package | 24-QFN (5 x 5 mm) | 24-QFN (5 x 5 mm) |
| Processor Core | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 24 MHz | 24 MHz |
| Flash Memory | 16 KB | 16 KB |
| RAM | 4 KB | 4 KB |
| Digital I/O Pins | 17 | 17 |
| Timer Configuration | 2 x 16-bit | 2 x 16-bit |
| Supply Voltage Range | 1.98 V to 3.8 V | 1.98 V to 3.8 V |
| Low-Power Sleep Current | 0.5 uA | 0.5 uA |
Bảo phân biệt quan trọng
- Exact core and memory configuration (vsEFM32TG110F16-QFN24)
- Lower-power operating characteristics for energy-sensitive designs (vsEFM32TG110F16-QFN24)
- Compact package with useful fixed-memory allocation (vsEFM32ZG110F8-QFN24)
Ghi chú thiết kế
Follow the manufacturer QFN exposed-pad layout exactly, including the pad dimensions, solder mask, and copper treatment specified for the 24-QFN 5 x 5 mm package. Place the input and internal supply decoupling capacitors close to their associated pins, and keep the exposed pad connected to the intended ground plane. Verify the recommended via pattern and land geometry against the current package drawing before releasing artwork.
Design the 1.98 V to 3.8 V supply rail so it remains valid during startup and maximum peripheral activity. Place local bulk and high-frequency decoupling close to the device, and account for voltage tolerance, transient response, and the ground return path in the power estimate. The family's 114 uA/MHz run figure is a processor-related characteristic, not a complete board-level consumption value.
Do not treat a similar package, memory size, and pin count as proof of pin compatibility. Confirm the alternate-function map, power pins, ground pins, exposed pad, debug signals, and peripheral assignments in the manufacturer pin-description tables. Firmware should also be rebuilt against the selected device revision and ordering code rather than assuming binary compatibility across all family members.
Keep switching-regulator loops, high-current traces, and fast digital edges away from sensitive analog inputs and communication lines. Provide a direct, low-impedance ground reference beneath the MCU and use controlled return paths for signals crossing power domains. When using the low-power modes, verify that external pull resistors, transceivers, and sensors do not create a leakage path that dominates the MCU's low-power current.
Thông tin tuân thủ
No specific environmental or automotive compliance statements are included in the technical listings for this exact ordering code.