EP1K30QI208-3N - 30K Gate ACEX 1K FPGA, 147 I/O, 208-PQFP | Intel (Altera)
MPN: EP1K30QI208-3N ✗ Cuối đờiEP1K30QI208-3N Tóm tắt
An FPGA (Field-Programmable Gate Array) is a programmable logic device that combines the integration density of a gate array with the flexibility of in-system reprogrammability. ACEX 1K sits in the low-to-mid density FPGA tier, positioned between simple CPLDs and high-density SRAM-based FPGAs, and is widely used for interface bridging, custom peripheral expansion, and DSP pre-processing on cost-sensitive industrial boards. The -3N speed grade and industrial temperature rating (-40 °C to +85 °C) target factory automation, telecom peripherals, and long-life industrial equipment.
Key features include 24,576 RAM bits, 6 Embedded Array Blocks, dual LVTTL/LVCMOS I/O support, JTAG-based in-system programmability via the IEEE 1149.1 boundary-scan chain, and on-chip clock-management PLLs that simplify multi-clock designs. The 208-pin PQFP package with 0.5 mm pitch is a through-hole-friendly plastic package suitable for socketed prototypes and lower-density production runs where BGA rework costs are unacceptable.
Architecturally, ACEX 1K devices embed logic array blocks (LABs) backed by continuous SRAM configuration memory, which is loaded at power-up from a serial configuration EPROM such as the EPC2 or EPC8. This volatile configuration model makes the EP1K30QI208-3N ideal for designs where configuration flexibility, fast prototyping, and iterative revision outweigh the need for non-volatility. MultiVolt I/O allows 3.3 V, 2.5 V, and 1.8 V interfacing without external level shifters.
Typical applications include industrial PLC interface cards, telecom line-card glue logic, medical instrument front-panel controllers, legacy parallel-bus bridges, and compact PCI peripheral controllers. The wide operating voltage tolerance and rugged PQFP package also make it a popular retro-fit for older Altera designs that are being re-spun onto current revision hardware without a layout re-spin.
When designing with this device, remember that the configuration is volatile - a boot PROM or microcontroller is mandatory. The 0.5 mm PQFP pitch can be hand-soldered with a fine-tip iron, but production assembly requires careful solder-paste stencil design and bottom-side preheat profiling to avoid tombstoning the fine-pitch leads.
This page synthesizes distributor stock levels, ACEX 1K family cross-references, drop-in pin-compatible alternatives, and practical layout guidance not found in the original datasheet - useful both for new designs and for sustaining older industrial systems that depend on this long-life part.
Bộ thay thế dễ dàng lắp đặt cho EP1K30QI208-3N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EP1K30QI208-3N (cùng hình factor và footprint) — khác nhau ở Speed Grade, Operating Temperature, Package, RoHS Status, Total RAM Bits.
EP1K30QI208-2N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1K30QI208-2
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1K30QC208-3N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1K30QC208-3
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1K30QC208-2N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1K30QC208-2
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1K30QI208-3N Tỷ lệ tối đa & tính chất điện
| Series | ACEX 1K |
| Family | ACEX-1K |
| Logic Elements / Cells | 1728 |
| Total RAM Bits | 24576 |
| Number of I/O | 147 |
| Number of Dedicated Inputs | 6 |
| Number of Gates (typical) | 30000 |
| Number of Embedded Array Blocks | 6 |
| Core Supply Voltage | 2.375 V to 2.625 V (nominal 2.5 V) |
| I/O Standards | LVTTL, LVCMOS (multi-voltage I/O) |
| Nhiệt độ hoạt động | -40 C to +85 C (industrial) |
| Speed Grade | -3 |
| Hộp | 208-pin PQFP / FQFP (S-PQFP-G208), 0.5 mm pitch |
| Configuration Memory | Volatile SRAM (serial configuration required) |
| Programming Interface | JTAG (IEEE 1149.1) + serial configuration |
| Kiểu lắp đặt | Surface Mount (fine-pitch QFP) |
| Trạng thái RoHS | Compliant |
Cấu hình chân EP1K30QI208-3N
| Chân 1 | I/O — User I/O pin |
| Chân 2 | I/O — User I/O pin |
| Chân 3 | I/O — User I/O pin |
| Chân 4 | I/O — User I/O pin |
| Chân 5 | VCCIO — I/O supply voltage |
| Chân 6 | I/O — User I/O pin |
| Chân 7 | I/O — User I/O pin |
| Chân 8 | I/O — User I/O pin |
| Chân 9 | I/O — User I/O pin |
| Chân 10 | GND — Ground |
| Chân 11 | I/O — User I/O pin |
| Chân 12 | I/O — User I/O pin |
| Chân 13 | I/O — User I/O pin |
| Chân 14 | I/O — User I/O pin |
| Chân 15 | VCCINT — Core supply voltage (2.5 V) |
| Chân 16 | I/O — User I/O pin |
| Chân 17 | I/O — User I/O pin |
| Chân 18 | I/O — User I/O pin |
| Chân 19 | I/O — User I/O pin |
| Chân 20 | GND — Ground |
| Chân 21 | I/O — User I/O pin |
| Chân 22 | I/O — User I/O pin |
| Chân 23 | I/O — User I/O pin |
| Chân 24 | I/O — User I/O pin |
| Chân 25 | DCLK — Configuration clock input |
| Chân 26 | I/O — User I/O pin |
| Chân 27 | I/O — User I/O pin |
| Chân 28 | I/O — User I/O pin |
| Chân 29 | DATA0 — Configuration data input |
| Chân 30 | GND — Ground |
| Chân 31 | nCONFIG — Configuration control (active-low) |
| Chân 32 | I/O — User I/O pin |
| Chân 33 | I/O — User I/O pin |
| Chân 34 | I/O — User I/O pin |
| Chân 35 | I/O — User I/O pin |
| Chân 36 | VCCIO — I/O supply voltage |
| Chân 37 | I/O — User I/O pin |
| Chân 38 | I/O — User I/O pin |
| Chân 39 | I/O — User I/O pin |
| Chân 40 | I/O — User I/O pin |
| Chân 41 | GND — Ground |
| Chân 42 | I/O — User I/O pin |
| Chân 43 | I/O — User I/O pin |
| Chân 44 | I/O — User I/O pin |
| Chân 45 | I/O — User I/O pin |
| Chân 46 | VCCINT — Core supply voltage (2.5 V) |
| Chân 47 | I/O — User I/O pin |
| Chân 48 | I/O — User I/O pin |
| Chân 49 | I/O — User I/O pin |
| Chân 50 | I/O — User I/O pin |
| Chân 51 | GND — Ground |
| Chân 52 | I/O — User I/O pin |
| Chân 53 | I/O — User I/O pin |
| Chân 54 | I/O — User I/O pin |
| Chân 55 | I/O — User I/O pin |
| Chân 56 | MSEL0 — Configuration mode select |
| Chân 57 | I/O — User I/O pin |
| Chân 58 | I/O — User I/O pin |
| Chân 59 | I/O — User I/O pin |
| Chân 60 | GND — Ground |
| Chân 61 | I/O — User I/O pin |
| Chân 62 | I/O — User I/O pin |
| Chân 63 | I/O — User I/O pin |
| Chân 64 | I/O — User I/O pin |
| Chân 65 | VCCIO — I/O supply voltage |
| Chân 66 | I/O — User I/O pin |
| Chân 67 | I/O — User I/O pin |
| Chân 68 | I/O — User I/O pin |
| Chân 69 | I/O — User I/O pin |
| Chân 70 | GND — Ground |
| Chân 71 | nCE — Chip enable (active-low, cascade) |
| Chân 72 | I/O — User I/O pin |
| Chân 73 | I/O — User I/O pin |
| Chân 74 | I/O — User I/O pin |
| Chân 75 | I/O — User I/O pin |
| Chân 76 | VCCINT — Core supply voltage (2.5 V) |
| Chân 77 | I/O — User I/O pin |
| Chân 78 | I/O — User I/O pin |
| Chân 79 | I/O — User I/O pin |
| Chân 80 | I/O — User I/O pin |
| Chân 81 | GND — Ground |
| Chân 82 | I/O — User I/O pin |
| Chân 83 | I/O — User I/O pin |
| Chân 84 | I/O — User I/O pin |
| Chân 85 | I/O — User I/O pin |
| Chân 86 | nSTATUS — Configuration status (active-low) |
| Chân 87 | I/O — User I/O pin |
| Chân 88 | I/O — User I/O pin |
| Chân 89 | I/O — User I/O pin |
| Chân 90 | GND — Ground |
| Chân 91 | I/O — User I/O pin |
| Chân 92 | I/O — User I/O pin |
| Chân 93 | I/O — User I/O pin |
| Chân 94 | I/O — User I/O pin |
| Chân 95 | VCCIO — I/O supply voltage |
| Chân 96 | I/O — User I/O pin |
| Chân 97 | I/O — User I/O pin |
| Chân 98 | I/O — User I/O pin |
| Chân 99 | I/O — User I/O pin |
| Chân 100 | GND — Ground |
| Chân 101 | CONF_DONE — Configuration done (active-high) |
| Chân 102 | I/O — User I/O pin |
| Chân 103 | I/O — User I/O pin |
| Chân 104 | I/O — User I/O pin |
| Chân 105 | I/O — User I/O pin |
| Chân 106 | DEV_CLRn — Device clear (active-low) |
| Chân 107 | I/O — User I/O pin |
| Chân 108 | I/O — User I/O pin |
| Chân 109 | I/O — User I/O pin |
| Chân 110 | VCCINT — Core supply voltage (2.5 V) |
| Chân 111 | I/O — User I/O pin |
| Chân 112 | I/O — User I/O pin |
| Chân 113 | I/O — User I/O pin |
| Chân 114 | I/O — User I/O pin |
| Chân 115 | GND — Ground |
| Chân 116 | I/O — User I/O pin |
| Chân 117 | I/O — User I/O pin |
| Chân 118 | I/O — User I/O pin |
| Chân 119 | I/O — User I/O pin |
| Chân 120 | I/O — User I/O pin |
| Chân 121 | TDI — JTAG test data input |
| Chân 122 | I/O — User I/O pin |
| Chân 123 | I/O — User I/O pin |
| Chân 124 | I/O — User I/O pin |
| Chân 125 | TDO — JTAG test data output |
| Chân 126 | GND — Ground |
| Chân 127 | I/O — User I/O pin |
| Chân 128 | I/O — User I/O pin |
| Chân 129 | I/O — User I/O pin |
| Chân 130 | I/O — User I/O pin |
| Chân 131 | VCCIO — I/O supply voltage |
| Chân 132 | I/O — User I/O pin |
| Chân 133 | I/O — User I/O pin |
| Chân 134 | I/O — User I/O pin |
| Chân 135 | I/O — User I/O pin |
| Chân 136 | GND — Ground |
| Chân 137 | I/O — User I/O pin |
| Chân 138 | I/O — User I/O pin |
| Chân 139 | I/O — User I/O pin |
| Chân 140 | I/O — User I/O pin |
| Chân 141 | TCK — JTAG test clock |
| Chân 142 | I/O — User I/O pin |
| Chân 143 | I/O — User I/O pin |
| Chân 144 | I/O — User I/O pin |
| Chân 145 | VCCINT — Core supply voltage (2.5 V) |
| Chân 146 | I/O — User I/O pin |
| Chân 147 | I/O — User I/O pin |
| Chân 148 | I/O — User I/O pin |
| Chân 149 | I/O — User I/O pin |
| Chân 150 | GND — Ground |
| Chân 151 | TMS — JTAG test mode select |
| Chân 152 | I/O — User I/O pin |
| Chân 153 | I/O — User I/O pin |
| Chân 154 | I/O — User I/O pin |
| Chân 155 | I/O — User I/O pin |
| Chân 156 | I/O — User I/O pin |
| Chân 157 | I/O — User I/O pin |
| Chân 158 | I/O — User I/O pin |
| Chân 159 | I/O — User I/O pin |
| Chân 160 | GND — Ground |
| Chân 161 | I/O — User I/O pin |
| Chân 162 | I/O — User I/O pin |
| Chân 163 | I/O — User I/O pin |
| Chân 164 | I/O — User I/O pin |
| Chân 165 | I/O — User I/O pin |
| Chân 166 | I/O — User I/O pin |
| Chân 167 | I/O — User I/O pin |
| Chân 168 | I/O — User I/O pin |
| Chân 169 | I/O — User I/O pin |
| Chân 170 | GND — Ground |
| Chân 171 | I/O — User I/O pin |
| Chân 172 | I/O — User I/O pin |
| Chân 173 | I/O — User I/O pin |
| Chân 174 | I/O — User I/O pin |
| Chân 175 | I/O — User I/O pin |
| Chân 176 | I/O — User I/O pin |
| Chân 177 | I/O — User I/O pin |
| Chân 178 | I/O — User I/O pin |
| Chân 179 | I/O — User I/O pin |
| Chân 180 | GND — Ground |
| Chân 181 | CLK1 — Dedicated clock input 1 |
| Chân 182 | I/O — User I/O pin |
| Chân 183 | I/O — User I/O pin |
| Chân 184 | I/O — User I/O pin |
| Chân 185 | CLK2 — Dedicated clock input 2 |
| Chân 186 | I/O — User I/O pin |
| Chân 187 | I/O — User I/O pin |
| Chân 188 | I/O — User I/O pin |
| Chân 189 | I/O — User I/O pin |
| Chân 190 | GND — Ground |
| Chân 191 | I/O — User I/O pin |
| Chân 192 | I/O — User I/O pin |
| Chân 193 | I/O — User I/O pin |
| Chân 194 | I/O — User I/O pin |
| Chân 195 | I/O — User I/O pin |
| Chân 196 | I/O — User I/O pin |
| Chân 197 | I/O — User I/O pin |
| Chân 198 | I/O — User I/O pin |
| Chân 199 | I/O — User I/O pin |
| Chân 200 | GND — Ground |
| Chân 201 | I/O — User I/O pin |
| Chân 202 | I/O — User I/O pin |
| Chân 203 | I/O — User I/O pin |
| Chân 204 | I/O — User I/O pin |
| Chân 205 | I/O — User I/O pin |
| Chân 206 | I/O — User I/O pin |
| Chân 207 | I/O — User I/O pin |
| Chân 208 | I/O — User I/O pin |
Ứng dụng tiêu biểu
EP1K30QI208-3N phù hợp cho 6 Áp dụngs: Industrial PLC Interface Cards, Telecom Line-Card Glue Logic, Medical Instrument Front-Panel Controllers, Legacy Parallel-Bus Bridges, Compact PCI Peripheral Controllers, Retrofit of Legacy Altera Designs.
Industrial PLC Interface Cards
The EP1K30QI208-3N suits industrial PLC interface cards that must bridge legacy parallel buses (PC/104, ISA, VME) to modern backplanes. With 147 user I/O pins and 6 dedicated inputs, the device can absorb multi-port handshake logic, custom protocol converters, and encoder/decoder blocks that would otherwise require several discrete PALs and glue logic. The 30K-gate density leaves margin for interrupt controllers and mailbox FIFOs, while the industrial -40 C to +85 C rating handles factory-floor thermal stress. Unlike a CPLD, the FPGA can host multiple parallel state machines without routing congestion. Typical designs use the EP1K30 as the I/O concentrator between an embedded SBC and the analog I/O stage.
Được đề xuất
Telecom Line-Card Glue Logic
In telecom line cards, the EP1K30QI208-3N is commonly used to consolidate HDLC controllers, framer glue, alarm scanners, and timeslot crossbar switches onto a single programmable device. The 24,576 RAM bits are sufficient to hold small FIFOs for traffic shaping on T1/E1 backplanes, and the MultiVolt I/O simplifies 3.3 V to 5 V interfacing with legacy framer ASICs without external level shifters. The -3 speed grade comfortably meets E1 (2.048 MHz) and T1 (1.544 MHz) backplane timing with several hundred MHz of internal fMAX headroom. Industrial temperature handling supports outside-plant cabinets and central-office deployments.
Được đề xuất
Medical Instrument Front-Panel Controllers
The EP1K30QI208-3N fits medical instrument front panels that need to debounce keypads, drive character LCDs, multiplex LED arrays, and buffer serial links to the main processor. The 147 user I/O count easily covers a 4x5 keypad scan matrix, parallel LCD interface, and dedicated indicator LEDs, while the SRAM-based configuration allows last-minute UI customization without board respins. With 1,728 logic elements, designers can also embed a small timer/counter chain for infusion-pump or patient-monitor subsystems. Industrial temperature grading plus lead-free PQFP packaging meets hospital equipment reliability expectations.
Được đề xuất
Legacy Parallel-Bus Bridges
The EP1K30QI208-3N is widely deployed as a bus bridge between legacy microcontrollers (8051, 68K, MIPS) and modern peripherals such as SDRAM controllers, Ethernet MACs, or USB device chips. The FPGA absorbs wait-state insertion, address decoding, and chip-select generation in hardware, freeing the host CPU from interrupt-driven bus emulation. The 208-pin PQFP footprint is large enough to expose dedicated control pins for bus request/grant, while 24,576 RAM bits can hold small mailbox FIFOs between the two domains. Engineers upgrading old designs use the FPGA to extend product life without an ASIC re-spin.
Được đề xuất
Compact PCI Peripheral Controllers
In Compact PCI and PMC mezzanine designs, the EP1K30QI208-3N acts as a custom peripheral controller implementing protocol adaptation, DMA handshaking, and local interrupt arbitration. The 147 user I/O plus dedicated clock inputs map neatly onto PCI local-bus signals and provide additional general-purpose lines for mezzanine I/O expansion. The -3 speed grade delivers sufficient timing margin for 33 MHz PCI operation, while the industrial temperature rating supports chassis temperature requirements. Volatile SRAM configuration means designers can update firmware personality in the field without re-soldering.
Được đề xuất
Retrofit of Legacy Altera Designs
Many long-life industrial products continue to specify the EP1K30QI208-3N for retrofit and sustaining-engineering builds. Because the 208-pin PQFP footprint, configuration sequence, and Quartus toolchain support have remained stable across ACEX 1K die revisions, designers can swap equivalent speed grades without rerunning timing closure from scratch. The drop-in nature of the EP1K30QI208-2N (faster speed grade) and EP1K30QC208-3N (commercial temp) makes the family a flexible sustainment platform. The lead-free PQFP package aligns with current RoHS reflow profiles even on boards designed before 2006.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EP1K30QI208-3N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EP1K30QI208-2N | EP1K30QC208-3N | EP1K30QC208-3 | EP1K30QC208-2N |
|---|---|---|---|---|---|
| Package | 208-PQFP (0.5 mm pitch) | 208-PQFP - same | 208-PQFP - same | 208-PQFP - same | 208-PQFP - same |
| Brand | Altera (Intel PSG) | Altera - same | Altera - same | Altera - same | Altera - same |
| Family / Logic Elements | ACEX 1K / 1728 LEs | ACEX 1K / 1728 LEs - same | ACEX 1K / 1728 LEs - same | ACEX 1K / 1728 LEs - same | ACEX 1K / 1728 LEs - same |
| Speed Grade | -3 | -2 (faster) | -3 - same | -3 - same | -2 (faster) |
| Operating Temperature | -40 C to +85 C (industrial) | -40 C to +85 C - same | 0 C to +70 C (commercial) | 0 C to +70 C (commercial) | 0 C to +70 C (commercial) |
| User I/O Count | 147 | 147 - same | 147 - same | 147 - same | 147 - same |
| Total RAM Bits | 24576 | 24576 - same | 24576 - same | 24576 - same | 24576 - same |
| Core Voltage | 2.5 V (2.375-2.625 V) | 2.5 V - same | 2.5 V - same | 2.5 V - same | 2.5 V - same |
Bảo phân biệt quan trọng
- Industrial temperature rating with same-die pin compatibility (vsEP1K30QC208-3N)
- Faster speed grade drop-in path (vsEP1K30QI208-2N)
- Compact 208-PQFP outline vs higher-density FPGAs (vsEP1K100QI208-3N)
Ghi chú thiết kế
The EP1K30QI208-3N core runs on a 2.5 V supply (VCCINT, 2.375-2.625 V) while VCCIO pins must be tied to 3.3 V, 2.5 V, or 1.8 V depending on the I/O standard chosen. Decouple every VCCINT/VCCIO pair with a 0.1 uF ceramic placed within 5 mm of the package pin, plus a bulk 10-100 uF tantalum or polymer cap on each rail. Estimated: ICCINT for a fully utilized EP1K30 is on the order of 100-200 mA at 2.5 V plus I/O switching current; design the 2.5 V regulator for at least 500 mA of headroom to avoid voltage droop during configuration bursts.
The 208-pin PQFP at 0.5 mm pitch demands a 4-layer PCB with continuous power planes underneath the package. Fan-out the fine-pitch leads on the outer top layer using short, equal-length traces with a maximum 1:1 trace-to-pad aspect ratio to maintain manufacturing yield. Add a 5 mm keep-out around the package body for probe access, and place the EPC2/EPC8 configuration PROM within 50 mm of DCLK/DATA0/nCONFIG to avoid signal-integrity issues during configuration.
JTAG chain integrity is critical for ACEX 1K in-system programming. TMS and TDI should be weakly pulled up to VCCIO via 10 kohm resistors to keep the JTAG state machine in a known state during power-up. TCK should be routed as a controlled-impedance trace with a series 33 ohm damping resistor at the driver. The nCONFIG line must be held low for at least 8 us after VCCINT stable to ensure a clean configuration cycle, and CONF_DONE should be weakly pulled high to detect configuration failures.
Do not confuse the EP1K30QI208-3N (industrial -40 to +85 C, speed grade -3) with the EP1K30QC208-3N (commercial 0 to +70 C, speed grade -3) - the part numbers look nearly identical. Do not assume configuration memory is non-volatile - without an external EPC2/EPC8 PROM the device powers up unconfigured and all I/O will be tri-stated. Finally, do not hot-swap the configuration PROM in-circuit; always assert nCONFIG low before reprogramming to avoid bus contention on the configuration pins.
Thông tin tuân thủ
RoHS compliant and lead-free per Altera / Intel PSG product declaration. Not AEC-Q100 qualified (industrial-grade FPGAs are typically not AEC-Q100 unless explicitly designated).
