Intel

EP20K200RC240-3N - APEX 20K FPGA 200K Gates 167MHz 240-RQFP | Intel

MPN: EP20K200RC240-3N ✗ Cuối đời

2.5 V Vdss 240-RQFP (RQFP240) with exposed pad Package 167 MHz Speed 106,496 Memory

Yêu cầu báo giá

MOQ: 1 |

Xem tài liệu kỹ thuật (PDF) Xem các bộ thay thế

Số lượng

EP20K200RC240-3N Tóm tắt

The Intel (formerly Altera) EP20K200RC240-3N is a member of the APEX 20K family of field-programmable gate arrays (FPGAs) fabricated on a 0.22 µm CMOS process, integrating approximately 200,000 system gates and 8,320 logic elements (LEs) in a 240-pin RQFP package with exposed pad. It supports a maximum internal clock frequency of 167 MHz and operates from a 2.5 V core supply.

An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit whose logic function is defined after manufacturing by the end user. FPGAs occupy a unique position in the integrated circuit taxonomy: programmable logic device (PLD) -> FPGA -> system-on-a-programmable-chip (SOPC). They are widely used as prototyping vehicles and as low-volume production alternatives to custom ASICs, providing high I/O count, embedded memory, and parallel processing capability unavailable in fixed-function microcontrollers or DSPs.

Key features of the EP20K200RC240-3N include MultiCore architecture that integrates look-up table (LUT) logic, product-term logic, and embedded memory in a single device. The device exposes 174 user I/O pins, four dedicated inputs, and supports LVDS signaling in some APEX 20KE variants. Maximum propagation delay is rated at 3.6 ns through the I/O pad, and the device provides on-chip phase-locked loops (PLLs) and embedded system blocks (ESBs) for distributed dual-port RAM.

The APEX 20K family introduced the MultiCore concept that combined fine-grained LUT logic with coarse-grained product-term logic, allowing designers to mix data-path and control logic efficiently. The -3N speed grade designates the standard-speed commercial-temperature grade with Pb-free (lead-free) packaging, suitable for designs that do not require the higher-performance -2 or -1 grades or the wider -I industrial temperature option.

Typical applications include telecommunications line-card interfaces, custom DSP preprocessing blocks, industrial motor-control glue logic, prototyping bridges to ASICs, and high-speed data-acquisition front-ends where 174 user I/Os are required. The exposed pad on the 240-RQFP package aids thermal dissipation but is electrically bonded to ground.

When designing with this device, account for its NRND status - it has not been recommended for new designs since the APEX 20K family was superseded by Cyclone, Stratix, and Arria families. New designs should target a Cyclone III/IV/10 LP or MAX V equivalent unless legacy compatibility is required.

This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Bộ thay thế dễ dàng lắp đặt cho EP20K200RC240-3N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EP20K200RC240-3N (cùng hình factor và footprint) — khác nhau ở Package, Speed Grade, Maximum Internal Frequency, System Gates, Process Technology.

EP20K200RC240-1

Intel

Package: 240-BFQFP Exposed Pad (RQFP)

Speed Grade: -1

Maximum Internal Frequency: 250 MHz