EP4CE10F17I8LN - 10,320-Cell FPGA | Altera | Cyclone IV E
MPN: EP4CE10F17I8LN ✓ Hoạt độngEP4CE10F17I8LN Tóm tắt
A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and input/output behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, alongside CPLDs, and provides reconfigurable parallel hardware for digital control, interface, signal-processing, and embedded-system functions. Compared with a fixed ASIC, an FPGA allows design revisions to be implemented through configuration files rather than a new photolithography cycle.
Key device characteristics include 10,320 logic cells, a 1.2 V core supply, and a 256-pin FBGA package. The 256 contacts support power distribution, configuration, user I/O, and other device functions according to the Cyclone IV E pin definition. The package is supplied in a tray configuration for production assembly. Its 60 nm process generation places the device within the Cyclone IV E family, whose architecture combines programmable logic elements with dedicated resources for common control, communications, memory, and signal-processing tasks.
The EP4CE10F17I8LN is suitable for industrial control systems, sensor aggregation, communication interfaces, protocol conversion, embedded test equipment, and general-purpose digital logic. Designers can use a hardware description language and an Intel or Altera FPGA development flow to synthesize, place, route, and program the design. The final system must account for configuration flash or another boot source, clocking, decoupling, bank voltage requirements, signal integrity, thermal performance, and the pin limitations of the F17 package.
Because pin multiplexing and I/O standards are package-specific, the F17 pin-information file and manufacturer datasheet should be used during schematic capture and PCB layout. Do not assume that a different Cyclone IV E package has the same ball assignments. The device name is only suitable for a drop-in replacement if the candidate retains the same EP4CE10 die, F17 256-pin FBGA footprint, core voltage, configuration behavior, and supported I/O characteristics.
This page combines the manufacturer product identity with package, process, supply-voltage, logic-capacity, and lifecycle information. It also identifies the important distinction between electrically similar ordering variants and genuinely drop-in alternatives: commercial-temperature or grade differences may preserve the footprint but can still prevent an unrestricted substitution in a qualified production design.
Bộ thay thế dễ dàng lắp đặt cho EP4CE10F17I8LN — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EP4CE10F17I8LN (cùng hình factor và footprint) — khác nhau ở Device Type, Package Type.
EP4CE10F17C8LN
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP4CE10F17I8L
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EP4CE10F17I8LN Tỷ lệ tối đa & tính chất điện
| Device Type | Field-Programmable Gate Array (FPGA) |
| FPGA Family | Cyclone IV E |
| Device Designation | EP4CE10 (F17) |
| Logic Cells | 10,320 cells |
| Process Technology | 60 nm |
| Core Supply Voltage | 1.2 V |
| Package Type | FBGA-256 |
| Package Designation | F17 |
| Total Pins | 256 pins |
| Kiểu lắp đặt | Surface Mount |
| Delivery Format | Tray |
| Temperature Grade | Industrial, -40°C to +100°C |
| Trạng thái RoHS | RoHS Compliant |
Hướng dẫn cấu hình chân EP4CE10F17I8LN f17
Cấu hình chân cho EP4CE10F17I8LN (f17 gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho EP4CE10F17I8LN.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
EP4CE10F17I8LN phù hợp cho 6 Áp dụngs: Industrial Control Systems, Sensor Aggregation and Edge Processing, Communication Protocol Conversion, Embedded Test and Measurement, Video Signal Processing, Programmable Logic Education.
Industrial Control Systems
The EP4CE10F17I8LN fits industrial controllers requiring deterministic parallel logic, flexible I/O, and field-updatable behavior. Its 10,320 logic cells can implement state machines, interlocks, sequencing, data acquisition, and communication-control blocks, while the 1.2 V core organizes the device around a modern programmable-logic architecture. In the 256-pin F17 FBGA package, the design must follow the package-specific bank and ball assignments rather than a generic EP4CE10 footprint. Use the device when reusability across product variants or late firmware changes provides more value than a fixed ASIC.
Được đề xuất
Sensor Aggregation and Edge Processing
The EP4CE10F17I8LN is useful when several sensor channels must be sampled, filtered, timestamped, and prepared for upstream transmission. Its 10,320 logic cells allow parallel acquisition, digital filtering, threshold detection, and protocol framing to coexist in one FPGA, reducing reliance on multiple processors. The 60 nm Cyclone IV E implementation is appropriate for compact embedded systems where deterministic parallel throughput matters. Engineers should budget I/O pins, establish compliant clocking, and verify voltage-tolerance requirements for every connected sensor before finalizing the board.
Được đề xuất
Communication Protocol Conversion
The EP4CE10F17I8LN can bridge interfaces with different framing, baud rates, or data widths by implementing receive and transmit state machines in parallel programmable logic. With 10,320 logic cells, a design can combine buffering, clock-domain crossing, CRC generation, and framing without routing routine traffic through a CPU. The 1.2 V core and 256-pin FBGA package make the device suitable for dedicated interface cards and embedded gateways. Signal-integrity review is essential because the F17 package supports many I/O balls but does not make every bank voltage combination available.
Được đề xuất
Embedded Test and Measurement
The EP4CE10F17I8LN can implement parallel stimulus generation, response capture, timing checks, and data compression for compact automated test equipment. The 10,320-cell Cyclone IV E device offers enough parallel logic to run multiple acquisition or pattern channels while maintaining flexible firmware-driven test sequencing. Reconfigurability also allows the same hardware platform to support new patterns without a board redesign. For precision analog instrumentation, pair the FPGA with suitable converters and carefully decouple every supply rail while observing the manufacturer's recommended operating and power conditions.
Được đề xuất
Video Signal Processing
The EP4CE10F17I8LN can support pixel-based processing, timing generation, color-space conversion, and data reduction in embedded video systems. Its 10,320 logic cells are suited to moderate-resolution pipeline designs where parallel throughput and deterministic timing are more important than maximum processor software flexibility. The 256-pin F17 FBGA provides a compact solution for camera, display, and industrial vision electronics. Validate video timing with the selected panel or sensor, account for I/O-bank restrictions, and implement clock-domain crossing whenever the incoming and processing clocks differ.
Được đề xuất
Programmable Logic Education
The EP4CE10F17I8LN provides a practical target for learning digital design, HDL compilation, placement, routing, timing analysis, and FPGA configuration. Its 10,320 logic cells offer enough capacity for meaningful counters, processors, interfaces, and soft-core experiments without using the largest device in the family. The 1.2 V core and industrial ordering grade also expose students to the electrical and package constraints encountered in professional hardware. A complete laboratory setup should include a supported board or breakout, configuration storage, clock generation, I/O protection, and programming access through the appropriate FPGA tool flow.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EP4CE10F17I8LN — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EP4CE10F17C8LN | EP4CE10F17I8L |
|---|---|---|---|
| Brand | Altera | Altera | Altera |
| Package | FBGA-256 (F17) | FBGA-256 (F17) | FBGA-256 (F17) |
| Device Family | Cyclone IV E | Cyclone IV E | Cyclone IV E |
| Logic Cells | 10,320 cells | 10,320 cells | 10,320 cells |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 60 nm | 60 nm | 60 nm |
| Total Pins | 256 pins | 256 pins | 256 pins |
Bảo phân biệt quan trọng
- Industrial-grade ordering option (vsEP4CE10F17C8LN)
- Exact 256-pin F17 package allocation (vsEP4CE10F17C8LN)
- Same EP4CE10 programmable logic capacity (vsEP4CE10F17I8L)
Ghi chú thiết kế
Assign the PCB land pattern from the F17 package drawing and the complete EP4CE10 F17 pin-information file rather than from a generic BGA-256 footprint. Confirm ball pitches, pad diameters, solder-mask definitions, via-in-pad requirements, and exposed-pad treatment against the manufacturer package specification. The 256-pin FBGA requires short escape routes and careful layer-transition planning to preserve signal integrity.
Use the manufacturer power-supply recommendations for the 1.2 V core and each applicable I/O bank. Place the required decoupling capacitors close to the relevant power balls, provide adequate return paths, and isolate noisy external circuits from sensitive FPGA rails. Verify startup current, configured I/O load, operating temperature, and worst-case rail tolerance before releasing the power design.
Create a complete bank-by-bank I/O plan that records every pin's allowed voltage, direction, drive strength, termination behavior, and usable function. The 256-pin package offers many connections, but F17 ball assignment and bank-power constraints determine which combinations are legal. Review edge rates and board-level channels with the manufacturer's guidance, especially for high-speed memory, clock, or serial interfaces.
Do not treat an EP4CE10 variant with a similar ordering code as an automatic drop-in replacement. Confirm the die capacity, F17 package, 1.2 V core, temperature grade, pin table, configuration method, and qualification requirements. In particular, a commercial-temperature suffix can change acceptable operating conditions even when the logic architecture and footprint appear unchanged.
Thông tin tuân thủ
RoHS compliance is stated by the component listing. No separate REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 statement is documented.