EP4CE10F17I8LN - 10,320-Cell FPGA | Altera | Cyclone IV E
料号: EP4CE10F17I8LN ✓ 量产中EP4CE10F17I8LN 概述
A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and input/output behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, alongside CPLDs, and provides reconfigurable parallel hardware for digital control, interface, signal-processing, and embedded-system functions. Compared with a fixed ASIC, an FPGA allows design revisions to be implemented through configuration files rather than a new photolithography cycle.
Key device characteristics include 10,320 logic cells, a 1.2 V core supply, and a 256-pin FBGA package. The 256 contacts support power distribution, configuration, user I/O, and other device functions according to the Cyclone IV E pin definition. The package is supplied in a tray configuration for production assembly. Its 60 nm process generation places the device within the Cyclone IV E family, whose architecture combines programmable logic elements with dedicated resources for common control, communications, memory, and signal-processing tasks.
The EP4CE10F17I8LN is suitable for industrial control systems, sensor aggregation, communication interfaces, protocol conversion, embedded test equipment, and general-purpose digital logic. Designers can use a hardware description language and an Intel or Altera FPGA development flow to synthesize, place, route, and program the design. The final system must account for configuration flash or another boot source, clocking, decoupling, bank voltage requirements, signal integrity, thermal performance, and the pin limitations of the F17 package.
Because pin multiplexing and I/O standards are package-specific, the F17 pin-information file and manufacturer datasheet should be used during schematic capture and PCB layout. Do not assume that a different Cyclone IV E package has the same ball assignments. The device name is only suitable for a drop-in replacement if the candidate retains the same EP4CE10 die, F17 256-pin FBGA footprint, core voltage, configuration behavior, and supported I/O characteristics.
This page combines the manufacturer product identity with package, process, supply-voltage, logic-capacity, and lifecycle information. It also identifies the important distinction between electrically similar ordering variants and genuinely drop-in alternatives: commercial-temperature or grade differences may preserve the footprint but can still prevent an unrestricted substitution in a qualified production design.
直接替换替代料: EP4CE10F17I8LN ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: EP4CE10F17I8LN (相同外形与封装尺寸) ——差异在于 Device Type, Package Type.
EP4CE10F17C8LN
✅ 直接替换联系询价
查看数据手册 →EP4CE10F17I8L
✅ 直接替换 ⚠️ 规格未核验联系询价
查看数据手册 →EP4CE10F17I8LN 最大额定值与电气特性
| Device Type | Field-Programmable Gate Array (FPGA) |
| FPGA Family | Cyclone IV E |
| Device Designation | EP4CE10 (F17) |
| Logic Cells | 10,320 cells |
| Process Technology | 60 nm |
| Core Supply Voltage | 1.2 V |
| Package Type | FBGA-256 |
| Package Designation | F17 |
| Total Pins | 256 pins |
| 安装类型 | Surface Mount |
| Delivery Format | Tray |
| Temperature Grade | Industrial, -40°C to +100°C |
| RoHS 状态 | RoHS Compliant |
EP4CE10F17I8LN f17 引脚配置指南
EP4CE10F17I8LN(f17 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: EP4CE10F17I8LN.
请参阅 数据手册 以查看完整引脚配置。
典型应用
EP4CE10F17I8LN 适用于 6 应用s: Industrial Control Systems, Sensor Aggregation and Edge Processing, Communication Protocol Conversion, Embedded Test and Measurement, Video Signal Processing, Programmable Logic Education.
Industrial Control Systems
The EP4CE10F17I8LN fits industrial controllers requiring deterministic parallel logic, flexible I/O, and field-updatable behavior. Its 10,320 logic cells can implement state machines, interlocks, sequencing, data acquisition, and communication-control blocks, while the 1.2 V core organizes the device around a modern programmable-logic architecture. In the 256-pin F17 FBGA package, the design must follow the package-specific bank and ball assignments rather than a generic EP4CE10 footprint. Use the device when reusability across product variants or late firmware changes provides more value than a fixed ASIC.
推荐
Sensor Aggregation and Edge Processing
The EP4CE10F17I8LN is useful when several sensor channels must be sampled, filtered, timestamped, and prepared for upstream transmission. Its 10,320 logic cells allow parallel acquisition, digital filtering, threshold detection, and protocol framing to coexist in one FPGA, reducing reliance on multiple processors. The 60 nm Cyclone IV E implementation is appropriate for compact embedded systems where deterministic parallel throughput matters. Engineers should budget I/O pins, establish compliant clocking, and verify voltage-tolerance requirements for every connected sensor before finalizing the board.
推荐
Communication Protocol Conversion
The EP4CE10F17I8LN can bridge interfaces with different framing, baud rates, or data widths by implementing receive and transmit state machines in parallel programmable logic. With 10,320 logic cells, a design can combine buffering, clock-domain crossing, CRC generation, and framing without routing routine traffic through a CPU. The 1.2 V core and 256-pin FBGA package make the device suitable for dedicated interface cards and embedded gateways. Signal-integrity review is essential because the F17 package supports many I/O balls but does not make every bank voltage combination available.
推荐
Embedded Test and Measurement
The EP4CE10F17I8LN can implement parallel stimulus generation, response capture, timing checks, and data compression for compact automated test equipment. The 10,320-cell Cyclone IV E device offers enough parallel logic to run multiple acquisition or pattern channels while maintaining flexible firmware-driven test sequencing. Reconfigurability also allows the same hardware platform to support new patterns without a board redesign. For precision analog instrumentation, pair the FPGA with suitable converters and carefully decouple every supply rail while observing the manufacturer's recommended operating and power conditions.
推荐
Video Signal Processing
The EP4CE10F17I8LN can support pixel-based processing, timing generation, color-space conversion, and data reduction in embedded video systems. Its 10,320 logic cells are suited to moderate-resolution pipeline designs where parallel throughput and deterministic timing are more important than maximum processor software flexibility. The 256-pin F17 FBGA provides a compact solution for camera, display, and industrial vision electronics. Validate video timing with the selected panel or sensor, account for I/O-bank restrictions, and implement clock-domain crossing whenever the incoming and processing clocks differ.
推荐
Programmable Logic Education
The EP4CE10F17I8LN provides a practical target for learning digital design, HDL compilation, placement, routing, timing analysis, and FPGA configuration. Its 10,320 logic cells offer enough capacity for meaningful counters, processors, interfaces, and soft-core experiments without using the largest device in the family. The 1.2 V core and industrial ordering grade also expose students to the electrical and package constraints encountered in professional hardware. A complete laboratory setup should include a supported board or breakout, configuration storage, clock generation, I/O protection, and programming access through the appropriate FPGA tool flow.
推荐
推荐产品汇总
工程参考数据: EP4CE10F17I8LN ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EP4CE10F17C8LN | EP4CE10F17I8L |
|---|---|---|---|
| Brand | Altera | Altera | Altera |
| Package | FBGA-256 (F17) | FBGA-256 (F17) | FBGA-256 (F17) |
| Device Family | Cyclone IV E | Cyclone IV E | Cyclone IV E |
| Logic Cells | 10,320 cells | 10,320 cells | 10,320 cells |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 60 nm | 60 nm | 60 nm |
| Total Pins | 256 pins | 256 pins | 256 pins |
关键差异点
- Industrial-grade ordering option (对比 EP4CE10F17C8LN)
- Exact 256-pin F17 package allocation (对比 EP4CE10F17C8LN)
- Same EP4CE10 programmable logic capacity (对比 EP4CE10F17I8L)
设计说明
Assign the PCB land pattern from the F17 package drawing and the complete EP4CE10 F17 pin-information file rather than from a generic BGA-256 footprint. Confirm ball pitches, pad diameters, solder-mask definitions, via-in-pad requirements, and exposed-pad treatment against the manufacturer package specification. The 256-pin FBGA requires short escape routes and careful layer-transition planning to preserve signal integrity.
Use the manufacturer power-supply recommendations for the 1.2 V core and each applicable I/O bank. Place the required decoupling capacitors close to the relevant power balls, provide adequate return paths, and isolate noisy external circuits from sensitive FPGA rails. Verify startup current, configured I/O load, operating temperature, and worst-case rail tolerance before releasing the power design.
Create a complete bank-by-bank I/O plan that records every pin's allowed voltage, direction, drive strength, termination behavior, and usable function. The 256-pin package offers many connections, but F17 ball assignment and bank-power constraints determine which combinations are legal. Review edge rates and board-level channels with the manufacturer's guidance, especially for high-speed memory, clock, or serial interfaces.
Do not treat an EP4CE10 variant with a similar ordering code as an automatic drop-in replacement. Confirm the die capacity, F17 package, 1.2 V core, temperature grade, pin table, configuration method, and qualification requirements. In particular, a commercial-temperature suffix can change acceptable operating conditions even when the logic architecture and footprint appear unchanged.
合规信息
RoHS compliance is stated by the component listing. No separate REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 statement is documented.