EP4CE15M8I7N - 15K Logic Cells, 89 I/O FPGA | Altera
MPN: EP4CE15M8I7N ✗ Cuối đờiEP4CE15M8I7N Tóm tắt
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and programmable I/O resources are configured after manufacture. Within the product hierarchy, an FPGA is a programmable-logic IC and a semiconductor. The Cyclone IV E family provides configurable hardware for parallel logic, state machines, interfaces, signal processing, and control functions without requiring a custom mask for each design.
The EP4CE15M8I7N provides 15,408 logic cells, 963 logic array blocks, and 89 I/O according to the verified distributor specifications. Its 164-TFBGA package supports dense PCB integration, while the M8 device designation and I7N ordering code identify the specific package, speed, temperature, and ordering configuration. The available verified data does not provide detailed timing, memory, power, or pin-level values, so those parameters require the manufacturer datasheet.
Typical uses include industrial control, communications interfaces, instrumentation, embedded processing support, test equipment, and custom digital logic. Its programmable architecture allows designers to revise logic behavior, shorten development cycles, and consolidate functions that might otherwise require multiple discrete devices. The 89-I/O count is particularly relevant when a design needs substantial external connectivity.
For PCB implementation, engineers should preserve the exact 164-TFBGA footprint, provide all required power, ground, configuration, and decoupling connections, and validate signal integrity and thermal conditions against the manufacturer package data. The verified source data supports the package and core device identity, but does not establish a complete pin map or detailed power budget.
This page combines verified distributor specifications, source URLs, sourcing context, and engineering guidance. It intentionally distinguishes published values from parameters that still require manufacturer documentation rather than estimating FPGA timing, pinout, memory, or compliance details.
Bộ thay thế dễ dàng lắp đặt cho EP4CE15M8I7N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EP4CE15M8I7N (cùng hình factor và footprint) — khác nhau ở Device Type, Ordering Part Number, Package.
EP4CE30F23C7N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP4CE15M8I7N Tỷ lệ tối đa & tính chất điện
| Device Type | Cyclone IV E FPGA |
| Logic Cells | 15,408 |
| Logic Array Blocks | 963 LABS |
| I/O Count | 89 I/O |
| Hộp | 164-TFBGA |
| Process Technology | 60 nm |
| Supply Specification | 1.2 V |
| FPGA Type | Field Programmable Gate Array |
| Manufacturer | Altera |
| Ordering Part Number | EP4CE15M8I7N |
| Package Pin Count | 164 pins |
| Device Variant | EP4CE15 (M8) |
Hướng dẫn cấu hình chân EP4CE15M8I7N 164 pins
Cấu hình chân cho EP4CE15M8I7N (164 pins gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho EP4CE15M8I7N.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
EP4CE15M8I7N phù hợp cho 6 Áp dụngs: Industrial Control Systems, Communications Interface Consolidation, Data Acquisition and Instrumentation, Embedded Test Equipment, Programmable Signal Conditioning, Secure Control and Authentication Logic.
Industrial Control Systems
The EP4CE15M8I7N fits programmable industrial-control logic when a design needs 15,408 logic cells, 963 logic array blocks, and 89 I/O. It can implement sequencing, state machines, machine-control interfaces, interlocks, and digital signal routing while keeping the hardware adaptable to product revisions. The 164-pin TFBGA supports dense integration, although the verified data does not specify temperature grade, timing, or power limits. Engineers should validate all required I/O standards, timing margins, power rails, and environmental conditions against the exact manufacturer datasheet before production release.
Được đề xuất
Communications Interface Consolidation
The EP4CE15M8I7N is useful for communications-interface consolidation because its 15,408 logic cells and 89 I/O can support parallel protocol logic, framing, buffering, and control functions. A Cyclone IV E FPGA can implement fixed or configurable digital logic around external transceivers and processors. The verified data does not state supported I/O standards, maximum clock frequency, transceiver compatibility, or throughput, so the design must be checked against the exact family documentation. Configuration, clocking, and signal-integrity layouts also require manufacturer guidance.
Được đề xuất
Data Acquisition and Instrumentation
The EP4CE15M8I7N can support programmable acquisition, digital filtering, control, and data-formatting functions in instrumentation systems. Its 963 logic array blocks and 89 I/O provide a substantial configurable resource pool for parallel data paths, timing logic, and peripheral interfaces. The verified distributor information does not provide converter interface specifications, sampling rates, PLL details, or I/O voltage limits. Consequently, designers should use the manufacturer device documentation to verify compatibility with ADC, DAC, sensor, clock, and isolation components before schematic release.
Được đề xuất
Embedded Test Equipment
The EP4CE15M8I7N fits programmable test and measurement front ends where multiple timing, control, and digital-pattern functions need hardware reconfiguration. The 89-I/O count is useful for parallel stimulus, response capture, and control signals, while the 15,408 logic cells support protocol and sequencing logic. The supplied data does not identify differential I/O standards, clock ranges, acquisition performance, or operating temperature, so instrumentation developers must verify those parameters and complete the timing design using the official Cyclone IV E documentation.
Được đề xuất
Programmable Signal Conditioning
The EP4CE15M8I7N can implement programmable digital signal-conditioning logic for sensor, control, and embedded communications systems. Configurable logic can combine parallel data conversion, threshold logic, pulse shaping, state-machine control, and interface timing in one FPGA. Its usefulness depends on fitting the design within the available logic resources and meeting required clock and I/O specifications. Because the verified data does not state embedded-memory capacity, PLL count, maximum frequency, or I/O standards, these constraints must be checked before selecting the device for a production signal path.
Được đề xuất
Secure Control and Authentication Logic
The EP4CE15M8I7N can serve as a programmable control core for authentication, protocol checking, command sequencing, and access-control logic. Its 15,408 logic cells and 89 I/O provide enough configurable digital resources for moderate control-plane designs, while FPGA implementation allows the logic to be updated during development or product lifecycle management. The verified data does not specify cryptographic blocks, security features, side-channel resistance, configuration protection, or certification status. Security claims therefore require separate architecture and certification review rather than relying on FPGA family membership.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EP4CE15M8I7N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EP4CE30F23C7N |
|---|---|---|
| Brand | Altera | Altera |
| Device Family | Cyclone IV E | Cyclone IV E |
| Package | 164-TFBGA | 164-TFBGA package identity not independently verified |
| Drop-In Compatibility | Target device | Not independently verified as pin-compatible |
Bảo phân biệt quan trọng
- Verified programmable-logic capacity (vsEP4CE30F23C7N)
- External connectivity for modular designs (vsEP4CE30F23C7N)
- Dense package integration (vsEP4CE30F23C7N)
Ghi chú thiết kế
Use the manufacturer’s 164-TFBGA land pattern and pin-assignment drawing as the controlling layout reference. Do not infer ball locations from the package name or from a distributor pinout image. Reserve the required power, ground, configuration, clock, and user-I/O connections, and verify differential or fixed-pin assignments against the exact EP4CE15M8I7N documentation before releasing the PCB footprint.
Plan FPGA signal integrity around the selected clocking and I/O architecture, even though the supplied data does not provide maximum frequencies or I/O standards. Use controlled-length routing where required, provide solid return paths, account for package escape effects, and validate high-speed or sensitive analog-adjacent routes with simulation and measurement. The 164-pin TFBGA footprint can make escape routing and via access the limiting implementation factors.
Build the power tree only after checking the exact Cyclone IV E device datasheet for core, I/O, auxiliary, and configuration supply requirements; the verified distributor snippet only states a 1.2 V supply specification. Place required bypass capacitors close to their associated power balls, provide adequate plane or via connectivity, and estimate total rail current from the actual design utilization rather than from the FPGA nameplate alone.
Thông tin tuân thủ
The supplied verified snippets do not provide authoritative compliance declarations for EP4CE15M8I7N. Obtain the current manufacturer product documentation or distributor compliance record before making a compliance claim.
