EP4CE30F23C7N - 30K Logic Cells FPGA | Altera | Industrial
MPN: EP4CE30F23C7N ✓ Hoạt độngEP4CE30F23C7N Tóm tắt
An FPGA is a programmable semiconductor in which configurable logic blocks and routing networks implement digital functions after loading a design bitstream. Within the broader hierarchy, the EP4CE30F23C7N belongs to the Cyclone IV E family of FPGAs, programmable-logic devices, integrated circuits, and semiconductors. Its 30,000 logic elements make it suitable for control logic, data acquisition, protocol conversion, industrial automation, and embedded signal-processing systems where parallel hardware execution is useful.
The verified data identifies 328 I/Os, 608,256 bits of embedded memory, and 28,848 block RAM bits. These resources support moderate on-chip buffering, lookup-table-based logic, parallel datapaths, and state machines. The F23 package variant is associated with a 200 MHz maximum operating frequency in the supplied comparison data. Exact core voltage, I/O standards, temperature grade, speed grade, and recommended operating conditions require confirmation from the official device documentation.
The Cyclone IV E architecture is suitable when design flexibility and hardware parallelism matter more than the power density of an ASIC. Engineers can implement multiple control tasks concurrently, add protocol interfaces without changing the PCB, and update logic through a programmable configuration image. The same flexibility introduces design complexity, so pin planning, power budgeting, timing closure, and configuration-circuit review are essential.
Typical uses include programmable logic controllers, industrial data-acquisition systems, motor and machine controls, communication interfaces, test equipment, and embedded video or signal-processing blocks. The 484-BGA package provides a high pin count and fine-pitch routing requirements, demanding careful PCB layout, via planning, thermal management, and assembly inspection.
For a new design, begin with the exact Altera ordering-part-number page, verify the package, pinout, electrical limits, configuration requirements, and supported tools, then perform board-level validation. Do not substitute a different FPGA solely by logic-cell count; confirm pin compatibility, memory resources, voltage, package, and configuration behavior before any replacement.
This page consolidates the verified distributor and manufacturer source records, distinguishes documented facts from missing parameters, and provides practical selection and design guidance. It is intended to support engineering comparison and sourcing decisions, not to replace the complete Cyclone IV E device documentation.
Bộ thay thế dễ dàng lắp đặt cho EP4CE30F23C7N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EP4CE30F23C7N (cùng hình factor và footprint) — khác nhau ở Package, Device Type, Embedded Memory, Logic Elements, Process Technology.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếEP4CE30F23C7N Tỷ lệ tối đa & tính chất điện
| Device Type | Field Programmable Gate Array (FPGA) |
| FPGA Family | Cyclone IV E |
| Ordering Part Number | EP4CE30F23C7N |
| Logic Elements | 30,000 logic elements |
| Number of I/Os | 328 I/Os |
| Embedded Memory | 608,256 bits |
| Block RAM | 28,848 bits |
| Hộp | 484-BGA / FBGA-484 |
| Maximum Operating Frequency | 200 MHz |
| Core Voltage | 1.2 V |
| Number of Logic Array Blocks | 3 LABs |
| Kiểu lắp đặt | Surface Mount |
| Moisture Sensitivity | Yes |
Hướng dẫn cấu hình chân EP4CE30F23C7N 484-bga / fbga-484
Cấu hình chân cho EP4CE30F23C7N (484-bga / fbga-484 gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho EP4CE30F23C7N.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
EP4CE30F23C7N phù hợp cho 6 Áp dụngs: Industrial Programmable Logic Controller, Industrial Data Acquisition System, Communication Protocol Conversion, Motor and Machine Control, Test and Measurement Instrumentation, Embedded Signal Processing.
Industrial Programmable Logic Controller
The EP4CE30F23C7N can implement parallel control logic, state machines, sequencing, and industrial interface logic on one FPGA. Its 30,000 logic elements and 328 I/Os provide a substantial configurable resource pool, while 608,256 bits of embedded memory and 28,848 bits of block RAM support local buffering and data tables. In a controller, the device can combine multiple machine-control tasks without requiring a separate logic device for each function. The exact I/O voltage, industrial temperature rating, and timing closure must be confirmed from official documentation before deployment.
Được đề xuất
Industrial Data Acquisition System
For data-acquisition equipment, the FPGA fabric can parallelize input sampling, channel control, digital filtering, and data packing. The EP4CE30F23C7N provides 328 I/Os for parallel digital interfaces and embedded memory for buffering samples between processing stages. Its programmable architecture makes it useful when the sampling pipeline must be changed without redesigning a fixed-function ASIC. The verified material does not specify transceiver speeds or analog interfaces, so external converters and signal-conditioning components must be selected separately.
Được đề xuất
Communication Protocol Conversion
The EP4CE30F23C7N is suitable for protocol bridging and packet-processing functions that benefit from parallel hardware execution. Its programmable logic can implement transmit and receive state machines, FIFO control, CRC processing, framing logic, and interface adaptation, using embedded memory and block RAM as local storage. The 484-BGA package offers a large I/O and power-delivery footprint for complex designs, but its fine-pitch routing requires a mature PCB implementation. Exact supported I/O standards and interface timing are not present in the verified data.
Được đề xuất
Motor and Machine Control
In motor-control and machine-automation systems, an FPGA can execute deterministic timing, encoder decoding, PWM-related logic, sequencing, and protection functions in parallel. The EP4CE30F23C7N offers 30,000 logic elements, 3 LABs in the supplied comparison data, and 328 I/Os for connecting digital control and feedback signals. Its usefulness is strongest when several timing-critical channels must be coordinated. The verified material does not confirm motor-interface voltage levels, isolation, automotive qualification, or operating-temperature limits, so those requirements need separate validation.
Được đề xuất
Test and Measurement Instrumentation
The FPGA can act as a configurable digital subsystem in test equipment, combining pattern generation, response capture, timing control, and data formatting. The EP4CE30F23C7N’s 30,000 logic elements and 608,256 bits of embedded memory allow multiple instrument functions to share a single programmable device, while 328 I/Os support dense parallel connections. This is attractive when instrument behavior changes across product variants. The supplied data does not include clock-jitter, I/O-rate, or acquisition-channel specifications, so analog front-end and high-speed interface requirements must be checked independently.
Được đề xuất
Embedded Signal Processing
The EP4CE30F23C7N can implement fixed datapath functions such as filters, correlation, waveform shaping, and data reduction with parallel logic and local memory. Its programmable resources make it possible to adapt the signal-processing pipeline as requirements evolve, while the block RAM can support sample buffering and timing alignment. The Cyclone IV E family is appropriate when hardware parallelism is more valuable than the absolute power efficiency of a dedicated ASIC. Exact DSP blocks, clock rates, and I/O timing were not included in the verified source data and must not be assumed.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EP4CE30F23C7N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EP4CE30F23I7N | EP4CE30F23C8N | EP4CE15F23A7N |
|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera |
| Device Family | Cyclone IV E | Cyclone IV E | Cyclone IV E | Cyclone IV E |
Bảo phân biệt quan trọng
- Identified device capacity and I/O resources (vsEP4CE30F23I7N)
- Same-family comparison clarity (vsEP4CE30F23C8N)
- Engineering traceability (vsEP4CE15F23A7N)
Ghi chú thiết kế
The 484-BGA package requires a manufacturer-approved land pattern, via array, and layer-routing strategy. Verify the exact EP4CE30F23C7N ball map and package drawing rather than deriving the footprint from the generic FBGA-484 name. Keep configuration, clock, power, and ground routing distinct, provide short return paths, and inspect the escape-routing around the fine-pitch array with the board manufacturer before fabrication.
The supplied comparison data identifies a 1.2 V core supply, but it does not provide the complete AC/DC current limits, sequencing, or I/O voltage-domain requirements. Establish a power budget from the official device documentation and include startup, transient, and configuration-current margins. Place decoupling according to the manufacturer’s guidance and verify that each supply rail meets its specified tolerance and sequencing rules.
The 200 MHz value is a device-level comparison figure, not a guaranteed system clock. Create clock constraints for every clock domain, model board-level skew and jitter, and run post-fit static timing analysis after routing. Pay particular attention to paths crossing I/O registers, embedded-memory interfaces, and high-fanout control nets, because congestion or poor constraint coverage can invalidate an apparently successful resource fit.
FPGA behavior depends on the loaded configuration image, so validate the complete configuration path, programming interface, reset behavior, and startup sequence. Do not assume that a board with the same package can accept a replacement device without checking the configuration flash interface, control pins, pin multiplexing, and bitstream compatibility. Include a recovery or reprogramming path in production designs when field updates are required.
The most common risk is treating a related Cyclone IV E ordering number as a drop-in substitute. Compare the exact suffix, package, temperature grade, voltage, I/O standards, timing class, and pin map before replacing EP4CE30F23C7N. Also avoid assuming that the reported logic-element count alone guarantees timing closure; routing, memory use, clocking, and design constraints can change the result substantially.
Thông tin tuân thủ
The supplied verified data does not explicitly state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for EP4CE30F23C7N. Compliance must be confirmed from the current manufacturer documentation or supplier declaration.
