Altera

EPF6016ATI100-2N - FLEX 6000 FPGA, 16K Gates, 100-TQFP | Altera/Intel

MPN: EPF6016ATI100-2N ✗ Cuối đời

3.3 V Vdss 100-pin TQFP Package 166.67 MHz Speed

Yêu cầu báo giá

MOQ: 1 |

Xem tài liệu kỹ thuật (PDF) Xem các bộ thay thế

Số lượng

EPF6016ATI100-2N Tóm tắt

The Intel/Altera EPF6016ATI100-2N is a member of the FLEX 6000 family of SRAM-based Field Programmable Gate Arrays (FPGAs), delivering approximately 16,000 usable gates in a 100-pin TQFP (Thin Quad Flat Pack) package. The device is built on a 0.42 um CMOS SRAM process and contains 1,320 logic elements (LEs) organized into 132 Logic Array Blocks (LABs), with 81 user I/O pins and an internal maximum operating frequency of approximately 166.67 MHz at a 3.3 V core supply. It supports in-system configuration via a JTAG-compatible boundary-scan interface and provides setup times as low as 2 ns with 0 ns hold time for high-speed sequential logic.

An FPGA (Field Programmable Gate Array) is a type of integrated circuit containing an array of configurable logic blocks (CLBs), programmable interconnect, and I/O cells that can be reconfigured by the designer after manufacturing. FPGAs sit between fixed-function ASICs and software-programmable processors in the design hierarchy, offering hardware-level parallelism without the NRE cost of an ASIC. The FLEX 6000 family specifically targets low-cost, high-volume glue logic, control, and bus-interface applications where fast design changes during development are required.

Key features of the EPF6016ATI100-2N include 81 user I/Os, JTAG BST (Boundary-Scan Test) support, slew-rate control on output buffers, tri-state buffer capability per I/O, and dedicated clock networks. The LABs each contain 10 LEs, and the FastTrack interconnect provides predictable timing paths between LABs. I/O pins can drive LE registers directly via the row and column interconnect, simplifying timing closure for high-speed state machines and FIFO controllers.

Architecturally, the device combines a fine-grained LE structure with row/column interconnect routing, allowing automatic place-and-route via the MAX+PLUS II or Quartus design tools. The 0.42 um SRAM process supports 5.0 V tolerant I/Os when the device is powered at 3.3 V, useful for mixed-voltage bus bridging between legacy 5 V peripherals and 3.3 V processors.

Typical applications include bus bridging between microprocessors and peripherals, custom peripheral glue logic in embedded systems, ASIC prototyping, state-machine controllers, and pre-production design validation. The wide I/O count supports 8/16/32-bit data buses with handshake signals.

When designing, ensure the configuration EPROM (such as an EPC2 or EPC8) is correctly sized for the bitstream, and observe 3.3 V supply decoupling with at least 0.1 uF ceramic capacitors near each VCC pin to maintain signal integrity on the JTAG and high-speed I/O lines.

This page combines distributor pricing, verified drop-in alternatives, and practical design notes that supplement the manufacturer datasheet for sourcing and redesign decisions.

Bộ thay thế dễ dàng lắp đặt cho EPF6016ATI100-2N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EPF6016ATI100-2N (cùng hình factor và footprint) — khác nhau ở Package, Operating Temperature, Process Technology, Speed Grade, Logic Array Blocks (LABs).

EPF6010ATI100-2

Altera

Package: 100-pin TQFP (14×14 mm, 0.5 mm pitch)

Operating Temperature: -40 °C to +85 °C (industrial)

Process Technology: 0.42 µm CMOS