EPF8820ATI144-1 - FLEX 8000 FPGA 8K Gates, 1.8ns, TQFP-144 | Altera
MPN: EPF8820ATI144-1 ✗ Cuối đờiEPF8820ATI144-1 Tóm tắt
The FLEX 8000 family is an SRAM-based programmable logic device (PLD) that combines fine-grained logic elements with continuous-channel routing to deliver predictable timing. It is widely used as a flexible substitute for discrete TTL/CMOS glue logic and gate arrays, allowing designers to integrate 5V and 3.3V interfaces through MultiVolt I/O buffers while operating from a 3.0 V to 3.6 V core supply.
Key features include a continuous FastTrack Interconnect routing architecture for deterministic timing, built-in JTAG (IEEE 1149.1) boundary-scan test, in-system programmability through the EPC configuration controller, and four dedicated high-speed clock inputs with on-chip PLL-like global clock distribution. The TQFP-144 package offers an industrial operating temperature range of -40 °C to +85 °C suitable for telecom, industrial control, and embedded computing designs.
Typical applications for the EPF8820ATI144-1 include high-volume glue-logic consolidation in 5V and 3.3V systems, PCI bus interface bridges, legacy ASIC and gate-array emulation, telecom line-card control logic, and industrial automation controllers. Its compatibility with the Quartus II and MAX+PLUS II design environments also makes it a useful bridge in maintenance and long-life-cycle designs.
When designing with the EPF8820ATI144-1, ensure the design tools (Quartus II or MAX+PLUS II) match the device, and verify configuration scheme support. The device is one of the highest-density FLEX 8000 members in a 144-pin TQFP; the same die is also offered in larger packages such as RQ208, R240, and C240 for applications needing more I/O pins.
Bộ thay thế dễ dàng lắp đặt cho EPF8820ATI144-1 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EPF8820ATI144-1 (cùng hình factor và footprint) — khác nhau ở Package, Process Technology, Configuration Method, Operating Temperature, Package Code.
EPF8820ATC144-1
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EPF8820ATC144-2
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EPF8636ATC144-1
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
EPF8452ATC144-1
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
EPF8820ATI144-1 Tỷ lệ tối đa & tính chất điện
| Family | FLEX 8000 |
| Device | EPF8820A |
| Usable Gates | 8,200 |
| Logic Elements | 672 |
| Maximum I/O Pins | 112 |
| Dedicated Inputs | 4 |
| Hộp | TQFP-144 (TI144) 0.500 mm pitch |
| Propagation Delay (tpd) | 1.8 ns |
| Core Supply Voltage (VCCINT) | 3.0 V to 3.6 V |
| I/O Supply Voltage (VCCIO) | 3.0 V to 3.6 V (MultiVolt I/O supports 5.0 V) |
| Process Technology | 0.42 µm CMOS EPROM |
| Nhiệt độ hoạt động | -40 °C to +85 °C (industrial) |
| Configuration | SRAM, in-system programmable via EPC configuration controller |
| Boundary Scan | IEEE 1149.1 JTAG compliant |
| Trạng thái RoHS | Unknown |
Cấu hình chân EPF8820ATI144-1
| Chân 1 | I/O — User I/O pin |
| Chân 2 | I/O — User I/O pin |
| Chân 3 | I/O — User I/O pin |
| Chân 4 | I/O — User I/O pin |
| Chân 5 | I/O — User I/O pin |
| Chân 6 | I/O — User I/O pin |
| Chân 7 | I/O — User I/O pin |
| Chân 8 | I/O — User I/O pin |
| Chân 9 | VCCINT — Core supply voltage (3.0-3.6 V) |
| Chân 10 | GND — Ground |
| Chân 11 | I/O — User I/O pin |
| Chân 12 | I/O — User I/O pin |
| Chân 13 | I/O — User I/O pin |
| Chân 14 | I/O — User I/O pin |
| Chân 15 | I/O — User I/O pin |
| Chân 16 | I/O — User I/O pin |
| Chân 17 | I/O — User I/O pin |
| Chân 18 | I/O — User I/O pin |
| Chân 19 | I/O — User I/O pin |
| Chân 20 | I/O — User I/O pin |
| Chân 21 | I/O — User I/O pin |
| Chân 22 | I/O — User I/O pin |
| Chân 23 | I/O — User I/O pin |
| Chân 24 | I/O — User I/O pin |
| Chân 25 | I/O — User I/O pin |
| Chân 26 | I/O — User I/O pin |
| Chân 27 | I/O — User I/O pin |
| Chân 28 | I/O — User I/O pin |
| Chân 29 | I/O — User I/O pin |
| Chân 30 | VCCIO — I/O supply voltage (3.0-3.6 V) |
| Chân 31 | I/O — User I/O pin |
| Chân 32 | I/O — User I/O pin |
| Chân 33 | I/O — User I/O pin |
| Chân 34 | I/O — User I/O pin |
| Chân 35 | I/O — User I/O pin |
| Chân 36 | I/O — User I/O pin |
| Chân 37 | I/O — User I/O pin |
| Chân 38 | I/O — User I/O pin |
| Chân 39 | I/O — User I/O pin |
| Chân 40 | I/O — User I/O pin |
| Chân 41 | I/O — User I/O pin |
| Chân 42 | I/O — User I/O pin |
| Chân 43 | I/O — User I/O pin |
| Chân 44 | GND — Ground |
| Chân 45 | I/O — User I/O pin |
| Chân 46 | I/O — User I/O pin |
| Chân 47 | I/O — User I/O pin |
| Chân 48 | I/O — User I/O pin |
| Chân 49 | I/O — User I/O pin |
| Chân 50 | I/O — User I/O pin |
| Chân 51 | I/O — User I/O pin |
| Chân 52 | I/O — User I/O pin |
| Chân 53 | I/O — User I/O pin |
| Chân 54 | I/O — User I/O pin |
| Chân 55 | I/O — User I/O pin |
| Chân 56 | I/O — User I/O pin |
| Chân 57 | I/O — User I/O pin |
| Chân 58 | I/O — User I/O pin |
| Chân 59 | I/O — User I/O pin |
| Chân 60 | VCCINT — Core supply voltage (3.0-3.6 V) |
| Chân 61 | I/O — User I/O pin |
| Chân 62 | I/O — User I/O pin |
| Chân 63 | I/O — User I/O pin |
| Chân 64 | I/O — User I/O pin |
| Chân 65 | I/O — User I/O pin |
| Chân 66 | I/O — User I/O pin |
| Chân 67 | I/O — User I/O pin |
| Chân 68 | I/O — User I/O pin |
| Chân 69 | I/O — User I/O pin |
| Chân 70 | I/O — User I/O pin |
| Chân 71 | I/O — User I/O pin |
| Chân 72 | I/O — User I/O pin |
| Chân 73 | I/O — User I/O pin |
| Chân 74 | I/O — User I/O pin |
| Chân 75 | I/O — User I/O pin |
| Chân 76 | GND — Ground |
| Chân 77 | nCONFIG — Configuration control (active low) |
| Chân 78 | nSTATUS — Configuration status (active low) |
| Chân 79 | CONF_DONE — Configuration done (open-drain) |
| Chân 80 | MSEL0 — Configuration mode select |
| Chân 81 | MSEL1 — Configuration mode select |
| Chân 82 | TCK — JTAG test clock |
| Chân 83 | TMS — JTAG test mode select |
| Chân 84 | TDI — JTAG test data in |
| Chân 85 | TDO — JTAG test data out |
| Chân 86 | CLK0 — Dedicated clock input |
| Chân 87 | CLK1 — Dedicated clock input |
| Chân 88 | CLK2 — Dedicated clock input |
| Chân 89 | CLK3 — Dedicated clock input |
| Chân 90 | DEDICATED IN — Dedicated high-speed input |
| Chân 91 | DEDICATED IN — Dedicated high-speed input |
| Chân 92 | DEDICATED IN — Dedicated high-speed input |
| Chân 93 | DEDICATED IN — Dedicated high-speed input |
| Chân 94 | I/O — User I/O pin |
| Chân 95 | I/O — User I/O pin |
| Chân 96 | I/O — User I/O pin |
| Chân 97 | I/O — User I/O pin |
| Chân 98 | I/O — User I/O pin |
| Chân 99 | I/O — User I/O pin |
| Chân 100 | I/O — User I/O pin |
| Chân 101 | I/O — User I/O pin |
| Chân 102 | I/O — User I/O pin |
| Chân 103 | I/O — User I/O pin |
| Chân 104 | VCCIO — I/O supply voltage (3.0-3.6 V) |
| Chân 105 | I/O — User I/O pin |
| Chân 106 | I/O — User I/O pin |
| Chân 107 | I/O — User I/O pin |
| Chân 108 | I/O — User I/O pin |
| Chân 109 | I/O — User I/O pin |
| Chân 110 | I/O — User I/O pin |
| Chân 111 | I/O — User I/O pin |
| Chân 112 | I/O — User I/O pin |
| Chân 113 | I/O — User I/O pin |
| Chân 114 | I/O — User I/O pin |
| Chân 115 | I/O — User I/O pin |
| Chân 116 | I/O — User I/O pin |
| Chân 117 | I/O — User I/O pin |
| Chân 118 | I/O — User I/O pin |
| Chân 119 | I/O — User I/O pin |
| Chân 120 | GND — Ground |
| Chân 121 | I/O — User I/O pin |
| Chân 122 | I/O — User I/O pin |
| Chân 123 | I/O — User I/O pin |
| Chân 124 | I/O — User I/O pin |
| Chân 125 | I/O — User I/O pin |
| Chân 126 | I/O — User I/O pin |
| Chân 127 | I/O — User I/O pin |
| Chân 128 | I/O — User I/O pin |
| Chân 129 | I/O — User I/O pin |
| Chân 130 | I/O — User I/O pin |
| Chân 131 | I/O — User I/O pin |
| Chân 132 | I/O — User I/O pin |
| Chân 133 | I/O — User I/O pin |
| Chân 134 | I/O — User I/O pin |
| Chân 135 | I/O — User I/O pin |
| Chân 136 | VCCINT — Core supply voltage (3.0-3.6 V) |
| Chân 137 | I/O — User I/O pin |
| Chân 138 | I/O — User I/O pin |
| Chân 139 | I/O — User I/O pin |
| Chân 140 | I/O — User I/O pin |
| Chân 141 | I/O — User I/O pin |
| Chân 142 | I/O — User I/O pin |
| Chân 143 | I/O — User I/O pin |
| Chân 144 | I/O — User I/O pin |
Ứng dụng tiêu biểu
EPF8820ATI144-1 phù hợp cho 6 Áp dụngs: Glue-Logic Consolidation in Industrial 5V/3.3V Systems, PCI Bus Interface Bridge, ASIC and Gate-Array Emulation, Telecom Line-Card Control Logic, Embedded Computing Backplanes, Legacy Industrial Control Replacement.
Glue-Logic Consolidation in Industrial 5V/3.3V Systems
The EPF8820ATI144-1 integrates discrete TTL/CMOS glue logic into a single FLEX 8000 FPGA, reducing board area and improving design flexibility. Its MultiVolt I/O buffer supports 5.0 V TTL inputs on a 3.3 V core, removing the need for level shifters when bridging legacy peripherals with modern processors. With 672 logic elements and 112 I/O pins, the device fits typical glue designs in industrial PLC backplanes, factory automation controllers, and motor-drive interface boards. Industrial temperature grade (-40 °C to +85 °C) ensures operation in factory floor environments.
Được đề xuất
PCI Bus Interface Bridge
The EPF8820ATI144-1 is well-suited as a PCI 5V/3.3V bridge in legacy 32-bit PCI add-in cards and embedded systems. Its 80 MHz global clock and 1.8 ns tpd support the 33 MHz PCI clock domain, while MultiVolt I/O handles 5V PCI signaling with a 3.3V core. 112 user I/O pins are sufficient for multiplexed address/data and side-band signals (REQ#, GNT#, FRAME#, IRDY#, TRDY#). The IEEE 1149.1 JTAG interface eases board-level boundary-scan test of the bridge logic.
Được đề xuất
ASIC and Gate-Array Emulation
The EPF8820ATI144-1 was widely used in the 1990s as a gate-array emulator for ASIC prototyping. Its SRAM-based programming allows designers to iterate logic changes in minutes rather than the weeks required for masked ASIC spins. The same TQFP-144 footprint is shared with the entire FLEX 8000 family, so engineers can migrate between EPF8282, EPF8452, EPF8636, and EPF8820 without PCB changes, using the highest-density member for final prototypes. This preserves form-factor across the design exploration phase.
Được đề xuất
Telecom Line-Card Control Logic
In telecom line cards, the EPF8820ATI144-1 provides deterministic, low-latency control logic for T1/E1 framers, LIU interfaces, and protocol glue. The FLEX 8000 family's FastTrack continuous routing architecture delivers predictable timing paths, which is critical for backplane and serial-line control where worst-case delay must be bounded. Industrial temperature operation, 5V-tolerant I/O, and the small TQFP-144 package make it well-matched to compact line-card designs. The device is JTAG-readable for in-system diagnostics.
Được đề xuất
Embedded Computing Backplanes
The EPF8820ATI144-1 functions as a bus arbiter, address decoder, or interrupt controller on VME, cPCI, and proprietary embedded backplanes. Its 112 I/O pins support multiplexed address/data plus control signals, while the 1.8 ns propagation delay maintains timing margins in 25–33 MHz backplanes. MultiVolt I/O interfaces cleanly with 3.3V processors and 5V peripheral memory. The TQFP-144 industrial-grade package handles the thermal and vibration stresses of industrial embedded enclosures.
Được đề xuất
Legacy Industrial Control Replacement
Long-life industrial equipment (CNC machines, process controllers, railway signaling) requires replacement of failed EPF8820ATI144-1 parts to keep existing lines running. Independent distributors such as Jotrin and AIChipLink continue to inventory date-coded FLEX 8000 stock for maintenance, repair, and operations. The drop-in TQFP-144 compatibility with higher-density FLEX 8000 family members also allows an upgrade path on the same PCB: a defective EPF8820ATI144-1 can be swapped for an EPF8636ATC144-1 to add spare logic capacity.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EPF8820ATI144-1 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EPF8820ATC144-1 | EPF8820ATC144-2 | EPF8636ATC144-1 | EPF8452ATC144-1 |
|---|---|---|---|---|---|
| Package | TQFP-144 (TI144) 0.500 mm | TQFP-144 (TC144) 0.500 mm - same | TQFP-144 (TC144) 0.500 mm - same | TQFP-144 (TC144) 0.500 mm - same | TQFP-144 (TC144) 0.500 mm - same |
| Brand | Altera | Altera | Altera | Altera | Altera |
| Usable Gates | 8,200 | 8,200 (same) | 8,200 (same) | 36,000 (higher) | 4,000 (lower) |
| Speed Grade | -1 | -1 (same) | -2 (faster) | -1 | -1 |
| Operating Temperature | -40 C to +85 C (industrial) | 0 C to +70 C (commercial) | 0 C to +70 C (commercial) | 0 C to +70 C (commercial) | 0 C to +70 C (commercial) |
| Core Voltage (VCCINT) | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| MultiVolt 5V-tolerant I/O | Yes | Yes | Yes | Yes | Yes |
Bảo phân biệt quan trọng
- Highest density FLEX 8000 in TQFP-144 (vsEPF8636ATC144-1)
- Faster propagation delay option exists in same package (vsEPF8820ATC144-2)
- Lower-density FLEX 8000 alternative available for cost-down (vsEPF8452ATC144-1)
Ghi chú thiết kế
EPF8820ATI144-1 requires two rails: VCCINT (3.0-3.6 V) for the core logic and VCCIO (3.0-3.6 V) for the I/O banks. Place 0.1 µF ceramic decoupling capacitors adjacent to every VCCINT and VCCIO pin, plus bulk 10-100 µF tantalum or polymer capacitors on each rail. During configuration, inrush current can reach 100-300 mA on VCCINT; use a ramp-up regulator with monotonic output to avoid triggering partial configuration. Connect all GND pins to a low-impedance ground plane.
Distribute VCCINT, VCCIO, and GND pins evenly across the TQFP-144 land pattern. The dedicated CLK pins (CLK0-CLK3) and the four dedicated inputs must be routed as matched-length, controlled-impedance traces if used for high-speed capture (32-bit counters, SDDR). For MultiVolt I/O, group 5V and 3.3V signaling on separate banks and route accordingly. The JTAG chain (TCK, TMS, TDI, TDO) should be pulled to known states through 10 kohm resistors to avoid floating behavior at power-up.
Never connect VCCIO to 5 V even though the inputs are 5V-tolerant — only the inputs tolerate 5V, the output drivers are powered from VCCIO and must remain at 3.0-3.6 V. Also, the device is SRAM-based and loses configuration on power-down, so a non-volatile EPC configuration controller (e.g., EPC1441) is mandatory for production. Finally, MAX+PLUS II or Quartus II software (not Quartus Prime) is required because Quartus Prime has dropped FLEX 8000 support; use legacy toolchains for bitstream generation.
Estimated: at maximum toggle rate on all 112 I/O pins with a 50 pF load, dynamic power consumption can reach 1.5 W (estimated from typical FLEX 8000 values, not a datasheet figure). The TQFP-144 package has a typical theta_JA of around 45-55 C/W without airflow, so junction temperature rise is 70-85 C above ambient. For sustained high-toggle designs, add 200-300 LFM airflow or thermal copper-pour thermal vias below the exposed pad area (when not present, use a continuous ground plane under the package).
Thông tin tuân thủ
RoHS, lead-free, and halogen-free status not stated in verified web data. This Altera FLEX 8000 device predates many modern compliance reporting standards and is supplied as obsolete stock.
