Renesas Electronics

ICS601M-01 - 156MHz Low-Phase-Noise PLL | Renesas

MPN: ICS601M-01 ✓ Hoạt động
3V to 5.5V Vdss 16-SOIC, 3.90mm width Package 156MHz Speed
MOQ: 1 |

ICS601M-01 Tóm tắt

Renesas Electronics ICS601M-01 is a single-output CMOS PLL clock synthesizer with a maximum output frequency of 156MHz, designed for low phase noise and low jitter. The device is available in a 16-pin SOIC package measuring 3.90mm wide and uses a 3V to 5.5V supply. Its clock-generation architecture provides a practical frequency multiplication solution for communications, digital signal processing, instrumentation, and other systems requiring a stable, low-noise reference-derived clock.

A PLL clock synthesizer is a timing IC that multiplies a lower-frequency reference signal to produce a higher-frequency output while controlling phase noise and jitter. Within the broader clock and timing hierarchy, the ICS601M-01 belongs to the PLL and clock-multiplier family, where it sits between a stable reference source and downstream digital circuits. Its value is particularly evident in designs where directly generating a required clock frequency would otherwise be difficult or where multiplication from an existing reference is more convenient.

The manufacturer describes the ICS601-01 family as a low-cost, low-phase-noise, high-performance clock synthesizer intended for applications requiring low phase noise and low jitter. The family is identified as ICS's lowest-phase-noise multiplier and lowest-CMOS part in the original product description. The ICS601M-01 combines a 156MHz maximum output with a 16-pin SOIC footprint, enabling compact implementation on conventional surface-mount PCB layouts.

The 16-SOIC package measures 3.90mm in body width and is designed for surface-mount assembly. Operation from a 3V to 5.5V supply supports integration with common low-voltage CMOS logic families. According to the manufacturer datasheet, correct operation requires only 0.01uF and 0.1uF decoupling capacitors connected between VDD and GND and placed as close to the device as practical. Detailed frequency-range, jitter, phase-noise, and output-waveform limits should be taken from the specific manufacturer datasheet revision before release to production.

Typical uses include generating a high-frequency processing clock from a lower-frequency oscillator, clocking communications receivers and transmitters, supporting digital signal-processing pipelines, and synthesizing clocks for industrial test equipment. In each case, the principal design question is whether the required output frequency, reference frequency, multiplication ratio, noise performance, and output format remain within the limits of the selected device and operating mode.

For PCB implementation, prioritize short return paths and compact decoupling. Place the 0.01uF and 0.1uF capacitors between VDD and GND near the corresponding supply pins, maintain continuous ground reference beneath the device, and route sensitive clock traces away from high-current switching nodes. Avoid long stubs and unnecessary test-point branches on the output because they can increase reflections and degrade timing margin.

This product page combines the manufacturer clock-synthesizer description, package information, decoupling guidance, drop-in family options, application guidance, and engineering design notes. It is intended to help engineers identify the correct Renesas ordering suffix, plan a compatible 16-SOIC layout, and evaluate ICS601M-01 for applications where low phase noise, low jitter, and 156MHz maximum clock performance are important.

Bộ thay thế dễ dàng lắp đặt cho ICS601M-01 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

ICS601M-01I

✅ Drop-In
📦 16-SOIC
Temperature-ordering suffix differs while maximum output remains 156MHz and the 16-SOIC footprint is retained

📋 Tham chiếu thay thế (không có trong danh mục)

ICS601M-01T

✅ Drop-In
📦 16-SOIC
Temperature-ordering suffix differs while maximum output remains 156MHz and the 16-SOIC footprint is retained

📋 Tham chiếu thay thế (không có trong danh mục)

ICS601M-01LFT

✅ Drop-In
📦 16-SOIC
Ordering and temperature suffix differs while the 16-SOIC footprint and 156MHz clock-multiplier function are retained

📋 Tham chiếu thay thế (không có trong danh mục)

ICS601M-01ILFT

✅ Drop-In
📦 16-SOIC
Industrial temperature and delivery suffix differs while retaining a 16-SOIC package and clock-multiplier function

📋 Tham chiếu thay thế (không có trong danh mục)

ICS601M-01IT

✅ Drop-In
📦 16-SOIC
Industrial temperature and tape-and-reel delivery suffix differs while maximum output remains 156MHz

📋 Tham chiếu thay thế (không có trong danh mục)

ICS601M-01 Thông số kỹ thuật

Product Type PLL clock synthesizer and clock multiplier
Maximum Output Frequency 156MHz
Số lượng đầu ra 1 output
Supply Voltage Range 3V to 5.5V
Logic Family CMOS
Hộp 16-SOIC, 3.90mm width
Kiểu lắp đặt Surface mount
Recommended Input Decoupling 0.01uF between VDD and GND
Recommended Output Decoupling 0.1uF between VDD and GND

Hướng dẫn cấu hình chân ICS601M-01 16-soic, 3.90mm width

Cấu hình chân cho ICS601M-01 (16-soic, 3.90mm width gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 16-soic, 3.90mm width cho ICS601M-01

Không có dữ liệu chân cụ thể sẵn có cho ICS601M-01.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ICS601M-01 phù hợp cho 6 Áp dụngs: Communications Clock Generation, Digital Signal Processing, Industrial Instrumentation, RF and Wireless Equipment, Test and Measurement, Network Interface Timing.

🌐

Communications Clock Generation

The ICS601M-01 fits communications equipment that derives a higher-frequency clock from an existing reference source. Its PLL-based clock synthesis can simplify clock distribution when a stable reference already exists elsewhere in the system, while the 156MHz maximum output provides room for digital processing and interface blocks. According to the manufacturer datasheet, the ICS601-01 family emphasizes low phase noise and low jitter, which helps preserve timing integrity in communication links. Confirm that the reference frequency, required multiplication ratio, output format, and allowed jitter fall within the operating limits of the selected mode.

⚡

Digital Signal Processing

The ICS601M-01 is suitable for digital signal-processing pipelines that require a deterministic, reference-related processing clock. Multiplying a system reference to 156MHz can reduce the need for additional oscillators and provide a common timing source for converters, filters, and digital logic. Low phase noise and low jitter are especially useful when the processed signal contains narrowband or phase-sensitive information. The design must still verify input-to-output frequency ratios, logic levels, and output timing against the processor or converter requirements.

🏭

Industrial Instrumentation

The ICS601M-01 can provide a compact clock source for industrial instrumentation, measurement equipment, and control modules that already have a stable reference oscillator. Its 16-SOIC package supports conventional surface-mount assembly, and the 156MHz maximum output is useful for sampling, signal-conditioning, and digital processing sections. Low phase noise and low jitter support applications in which clock instability would degrade measurement precision or control repeatability. Validate the operating temperature, supply tolerance, and required multiplication range before selecting the exact ordering suffix.

🌐

RF and Wireless Equipment

The ICS601M-01 can support reference-derived timing in RF and wireless equipment where a low-noise clock is needed alongside a digital control or processing path. PLL multiplication permits the system to use a common reference and derive a clock as high as 156MHz, reducing the number of independent frequency sources. Low phase noise and low jitter help preserve signal quality when the clock feeds modulation, demodulation, or high-speed digital sections. Check the required reference frequency and multiplication range, and account for RF routing and isolation when positioning the clock circuit.

🖥️

Test and Measurement

The ICS601M-01 is applicable to test and measurement systems that need a compact, low-noise clock derived from a laboratory reference. A multiplier-based architecture can provide a higher-frequency operating clock while preserving phase coherence with the instrument's reference source. The 156MHz ceiling makes it relevant to high-speed sampling and digital control, while the 16-SOIC package simplifies board-level integration. Confirm output jitter, frequency accuracy, and reference sensitivity under the actual measurement bandwidth and required operating temperature.

🖥️

Network Interface Timing

The ICS601M-01 can serve as a local clock multiplier in network-interface and embedded communication designs where an existing low-frequency reference is available. Generating a 156MHz-class clock from that reference may simplify distribution to serializer, controller, or Ethernet PHY blocks and can reduce reliance on additional discrete oscillators. The manufacturer's emphasis on low phase noise and low jitter helps maintain signal integrity in high-speed digital paths. Confirm that the reference source, PLL ratios, output format, and supply sequencing satisfy all devices sharing the generated clock.

What is the ICS601M-01 clock synthesizer used for?
The ICS601M-01 is a single-output CMOS PLL clock synthesizer used to multiply a reference clock and generate a low-phase-noise, low-jitter timing signal. According to the manufacturer datasheet for the ICS601-01 family, it is intended for applications that require low phase noise and low jitter. Its maximum output frequency is 156MHz, making it relevant to communications, digital signal processing, instrumentation, and other clock-generation circuits.
What are the key specifications of ICS601M-01 that engineers should know?
The ICS601M-01 combines a 156MHz maximum output frequency, one CMOS clock output, a 3V to 5.5V operating supply range, and a 16-pin SOIC package with a 3.90mm body width. According to the manufacturer datasheet, the device is designed as a low-phase-noise, low-jitter clock multiplier. The exact input range, output programming limits, and timing specifications should be confirmed against the applicable datasheet revision before production release.
Where can I download the ICS601M-01 datasheet PDF?
The ICS601M-01 datasheet is available through the manufacturer document identified as ICS601-01 Rev M and through the linked datasheet archive result for the ICS601M-01 family. The manufacturer document states that the ICS601-01 requires 0.01uF and 0.1uF decoupling capacitors between VDD and GND. Use that document to confirm pin assignments, operating limits, and programming details before laying out or modifying a PCB.
Where can I find the ICS601M-01 pinout?
The ICS601M-01 pinout is found in the pin-description and package diagrams of the manufacturer datasheet for the ICS601-01 family. The device uses a 16-pin SOIC package, but the individual terminal names are not reproduced on this page. Use the manufacturer pin-description table when assigning VDD, ground, reference-clock, feedback, and output connections so that PCB tracks match the exact ordering suffix and package drawing.
What is the difference between ICS601M-01 and ICS601M-01I?
Both parts use the same 16-SOIC clock-synthesizer package and are associated with the same 156MHz maximum-output family. The ordering suffix indicates different ordering or temperature-grade configurations, so the distinction is normally the device variant rather than the fundamental clock-generation function. Choose ICS601M-01I when its documented environmental and ordering conditions match the product requirements, and verify the exact suffix limits in the manufacturer datasheet.
Can ICS601M-01T replace ICS601M-01 on the same PCB?
The ICS601M-01T uses the same 16-SOIC footprint and is described as a 156MHz clock multiplier, so it is a package-compatible family option. The primary differences concern the ordering or temperature suffix and delivery format. Before treating it as a drop-in replacement, confirm that the required reference frequency, multiplier range, supply limits, temperature range, and exposed electrical limits are identical for both exact ordering codes.
What is the best drop-in replacement for ICS601M-01?
ICS601M-01I is the closest package-compatible replacement identified within the same Renesas clock-multiplier family because it retains the 16-SOIC footprint and 156MHz maximum output. ICS601M-01T and ICS601M-01LFT provide additional package-compatible ordering options. A replacement is appropriate only after checking the exact frequency limits, temperature range, reference-input requirements, and output configuration for both the installed and proposed part numbers.
Is ICS601M-01 suitable for communications and signal-processing clocks?
The ICS601M-01 is suitable when the design needs low phase noise, low jitter, and a reference-derived clock up to 156MHz. According to the manufacturer datasheet, the ICS601-01 family was created for applications requiring low phase noise and low jitter. The device can therefore support communications and digital signal-processing clock trees, provided the selected operating mode meets the required output frequency and timing margin.
What decoupling capacitors does ICS601M-01 require?
The manufacturer datasheet specifies 0.01uF and 0.1uF decoupling capacitors connected between VDD and GND, positioned as close to the device as possible. These capacitors should be placed on the PCB next to their associated supply pins with very short connections. Correct decoupling helps control supply impedance and high-frequency noise on the clock synthesizer's supply rails.
How should ICS601M-01 be laid out for low clock noise?
Place the 0.01uF and 0.1uF decoupling capacitors between VDD and GND directly beside the relevant pins, and provide a continuous ground reference beneath the SOIC. Route the output away from switching nodes and keep the clock trace short, without unnecessary stubs or test-point branches. These layout practices reduce supply disturbance and transmission-line reflections that can otherwise degrade the low-noise clock produced by the PLL.
Where can I buy ICS601M-01 online?
Use the Request a Quote form on this page to request the exact ICS601M-01 ordering code, current commercial terms, and supply information. The form is the appropriate route for confirming availability and lead time without relying on a static price that may change. Include the desired package suffix, quantity, and production schedule in the request so the quotation matches the exact component required.
What is the price of ICS601M-01?
The current commercial price of ICS601M-01 should be obtained through the Request a Quote form on this page. The form supports exact-MPN purchasing while keeping the commercial response tied to the requested quantity and availability at the time of quotation. Do not substitute a price from a differently suffixed ICS601M-01 variant, because temperature-grade and packaging options can have different commercial terms.
What is the lead time and stock status for ICS601M-01?
Request the current stock position, minimum order quantity, and lead time through the Request a Quote form on this page. Supply conditions can vary by ordering suffix and production quantity, so the exact MPN and required quantity should be stated in the request. A supplier can then confirm the allocation and delivery schedule for the ICS601M-01 configuration needed by the design.
What can replace ICS601M-01?
ICS601M-01I, ICS601M-01T, and ICS601M-01LFT are package-compatible alternatives within the same Renesas clock-multiplier family and retain the 16-SOIC format. The appropriate choice depends on the installed temperature grade, ordering format, reference frequency, and required multiplier range. Validate the complete electrical limits before replacing the part rather than relying on package appearance alone.
Is ICS601M-01 the same as ICS601M-01LFT?
ICS601M-01LFT is a same-family ordering variant with a 16-SOIC package, while ICS601M-01 is the base ordering code for the 156MHz clock multiplier. Their shared package makes the LFT option relevant to footprint-compatible sourcing, but suffix-dependent temperature, delivery, and qualification conditions must still be checked. Use the exact manufacturer ordering table to determine which variant fits the production environment.

Dữ liệu tham khảo kỹ thuật cho ICS601M-01 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the ICS601M-01 when a design requires a single CMOS PLL clock output, a maximum frequency of 156MHz, and the low-phase-noise, low-jitter characteristics described for the ICS601-01 family. The 16-SOIC package also suits conventional surface-mount PCB construction. Select ICS601M-01I when its documented environmental and ordering conditions fit the product but differ from the base code. Consider ICS601M-01T, ICS601M-01IT, ICS601M-01LFT, or ICS601M-01ILFT when a specific temperature or delivery configuration is required. These are same-family package-compatible choices, so an existing 16-SOIC footprint can generally be reused. The deciding factors are the reference frequency, required multiplication ratio, output format, operating temperature, qualification requirements, and exact suffix limits rather than package outline alone.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ICS601M-01I ICS601M-01T ICS601M-01LFT ICS601M-01ILFT ICS601M-01IT
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 16-SOIC, 3.90mm width 16-SOIC, 3.90mm width 16-SOIC, 3.90mm width 16-SOIC 16-SOIC 16-SOIC, 3.90mm width
Maximum Output Frequency 156MHz 156MHz 156MHz 156MHz 156MHz 156MHz
Output Count 1 output 1 output 1 output 1 output 1 output 1 output
Supply Voltage Range 3V to 5.5V 3V to 5.5V 3V to 5.5V 3V to 5.5V 3V to 5.5V 3V to 5.5V
Clock Architecture PLL clock multiplier PLL clock multiplier PLL clock multiplier PLL clock multiplier PLL clock multiplier PLL clock multiplier
Technology CMOS CMOS CMOS CMOS CMOS CMOS
Ordering Suffix ICS601M-01 base ordering code I suffix T suffix LFT suffix ILFT suffix IT suffix

Bảo phân biệt quan trọng

  • Reference-derived clock multiplication with low-noise design intent (vsICS601M-01I)
  • Package-compatible sourcing across the same clock-multiplier family (vsICS601M-01T)
  • Multiple suffix-specific options for procurement and production planning (vsICS601M-01LFT)

Ghi chú thiết kế

The manufacturer specifies 0.01uF and 0.1uF decoupling capacitors between VDD and GND, as close to the device as possible. Place each capacitor directly beside its relevant supply connection, use the shortest possible ground path, and avoid routing clock traces beneath the capacitor return area. Tight decoupling placement reduces the effective supply impedance seen by the PLL and helps prevent supply noise from appearing as clock phase noise.

Route the 156MHz-class clock output as a short, controlled-impedance trace and keep it away from switching nodes, inductors, and high-current return paths. Avoid unnecessary test pads, long pads, and branch stubs because discontinuities can create reflections that degrade the usable timing margin. If the clock must cross a larger separation, use a source termination strategy derived from the actual output impedance and receiver characteristics rather than adding an arbitrary series resistor.

Do not assume that every ICS601M-01 ordering suffix is interchangeable without checking its temperature, delivery, and qualification limits. The base, I, T, IT, LFT, and ILFT codes identify different member configurations even though the family shares a 16-SOIC footprint. Before replacement, compare the reference-input range, multiplication limits, output configuration, supply limits, and operating temperature for the exact installed and candidate MPNs.

Keep the PLL supply rail clean and within the documented 3V to 5.5V operating range. Provide adequate local energy storage for output transitions and keep switching-regulator ripple away from the clock synthesizer where the system permits separate filtering. If the PLL shares a rail with digital or RF loads, verify the rail's transient response at the operating clock frequency because supply movement can translate into output timing variation.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

No manufacturer compliance statements were identified in the cited product results. AEC-Q100 is not applicable to the base commercial ICS601M-01 ordering code unless the manufacturer documents an automotive-qualified suffix.

Dữ liệu được xác minh vào: 2026-11-16 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ICS601M-01 ICS601M-01 datasheet ICS601M-01 datasheet pdf ICS601M-01 pinout ICS601M-01 equivalent ICS601M-01 replacement ICS601M-01 cross reference ICS601M-01 price ICS601M-01 stock Renesas ICS601M-01 ICS601M-01 156MHz ICS601M-01 16-SOIC ICS601M-01 low phase noise ICS601M-01 vs ICS601M-01I ICS601M-01 communications clock

Các bộ phận và thuật ngữ liên quan

Renesas Electronics ICS601M-01 ICS601M-01I ICS601M-01T ICS601M-01IT ICS601M-01LFT ICS601M-01ILFT ICS601-01 PLL PLL clock synthesizer clock multiplier phase noise clock jitter CMOS 156MHz 16-SOIC SOIC family surface mount clock and timing IC semiconductor reference clock frequency synthesis communications timing digital signal processing
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ