ICS601M-01 - 156MHz Low-Phase-Noise PLL | Renesas
MPN: ICS601M-01 ✓ פעילICS601M-01 סקירה
A PLL clock synthesizer is a timing IC that multiplies a lower-frequency reference signal to produce a higher-frequency output while controlling phase noise and jitter. Within the broader clock and timing hierarchy, the ICS601M-01 belongs to the PLL and clock-multiplier family, where it sits between a stable reference source and downstream digital circuits. Its value is particularly evident in designs where directly generating a required clock frequency would otherwise be difficult or where multiplication from an existing reference is more convenient.
The manufacturer describes the ICS601-01 family as a low-cost, low-phase-noise, high-performance clock synthesizer intended for applications requiring low phase noise and low jitter. The family is identified as ICS's lowest-phase-noise multiplier and lowest-CMOS part in the original product description. The ICS601M-01 combines a 156MHz maximum output with a 16-pin SOIC footprint, enabling compact implementation on conventional surface-mount PCB layouts.
The 16-SOIC package measures 3.90mm in body width and is designed for surface-mount assembly. Operation from a 3V to 5.5V supply supports integration with common low-voltage CMOS logic families. According to the manufacturer datasheet, correct operation requires only 0.01uF and 0.1uF decoupling capacitors connected between VDD and GND and placed as close to the device as practical. Detailed frequency-range, jitter, phase-noise, and output-waveform limits should be taken from the specific manufacturer datasheet revision before release to production.
Typical uses include generating a high-frequency processing clock from a lower-frequency oscillator, clocking communications receivers and transmitters, supporting digital signal-processing pipelines, and synthesizing clocks for industrial test equipment. In each case, the principal design question is whether the required output frequency, reference frequency, multiplication ratio, noise performance, and output format remain within the limits of the selected device and operating mode.
For PCB implementation, prioritize short return paths and compact decoupling. Place the 0.01uF and 0.1uF capacitors between VDD and GND near the corresponding supply pins, maintain continuous ground reference beneath the device, and route sensitive clock traces away from high-current switching nodes. Avoid long stubs and unnecessary test-point branches on the output because they can increase reflections and degrade timing margin.
This product page combines the manufacturer clock-synthesizer description, package information, decoupling guidance, drop-in family options, application guidance, and engineering design notes. It is intended to help engineers identify the correct Renesas ordering suffix, plan a compatible 16-SOIC layout, and evaluate ICS601M-01 for applications where low phase noise, low jitter, and 156MHz maximum clock performance are important.
חלופות תחליף ישיר עבור ICS601M-01 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
ICS601M-01I
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ICS601M-01T
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ICS601M-01LFT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ICS601M-01ILFT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ICS601M-01IT
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
ICS601M-01 מפרטים
| Product Type | PLL clock synthesizer and clock multiplier |
| Maximum Output Frequency | 156MHz |
| מספר יציאות | 1 output |
| Supply Voltage Range | 3V to 5.5V |
| Logic Family | CMOS |
| מארז | 16-SOIC, 3.90mm width |
| סוג הרכבה | Surface mount |
| Recommended Input Decoupling | 0.01uF between VDD and GND |
| Recommended Output Decoupling | 0.1uF between VDD and GND |
מדריך תצורת פינים של ICS601M-01 16-soic, 3.90mm width
תצורת פינים עבור ICS601M-01 (מארזת 16-soic, 3.90mm width). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.
אין נתוני פריסת פינים מפורטים עבור ICS601M-01.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
ICS601M-01 מתאים עבור 6 יישוםs: Communications Clock Generation, Digital Signal Processing, Industrial Instrumentation, RF and Wireless Equipment, Test and Measurement, Network Interface Timing.
Communications Clock Generation
The ICS601M-01 fits communications equipment that derives a higher-frequency clock from an existing reference source. Its PLL-based clock synthesis can simplify clock distribution when a stable reference already exists elsewhere in the system, while the 156MHz maximum output provides room for digital processing and interface blocks. According to the manufacturer datasheet, the ICS601-01 family emphasizes low phase noise and low jitter, which helps preserve timing integrity in communication links. Confirm that the reference frequency, required multiplication ratio, output format, and allowed jitter fall within the operating limits of the selected mode.
מומלץ
Digital Signal Processing
The ICS601M-01 is suitable for digital signal-processing pipelines that require a deterministic, reference-related processing clock. Multiplying a system reference to 156MHz can reduce the need for additional oscillators and provide a common timing source for converters, filters, and digital logic. Low phase noise and low jitter are especially useful when the processed signal contains narrowband or phase-sensitive information. The design must still verify input-to-output frequency ratios, logic levels, and output timing against the processor or converter requirements.
מומלץ
Industrial Instrumentation
The ICS601M-01 can provide a compact clock source for industrial instrumentation, measurement equipment, and control modules that already have a stable reference oscillator. Its 16-SOIC package supports conventional surface-mount assembly, and the 156MHz maximum output is useful for sampling, signal-conditioning, and digital processing sections. Low phase noise and low jitter support applications in which clock instability would degrade measurement precision or control repeatability. Validate the operating temperature, supply tolerance, and required multiplication range before selecting the exact ordering suffix.
מומלץ
RF and Wireless Equipment
The ICS601M-01 can support reference-derived timing in RF and wireless equipment where a low-noise clock is needed alongside a digital control or processing path. PLL multiplication permits the system to use a common reference and derive a clock as high as 156MHz, reducing the number of independent frequency sources. Low phase noise and low jitter help preserve signal quality when the clock feeds modulation, demodulation, or high-speed digital sections. Check the required reference frequency and multiplication range, and account for RF routing and isolation when positioning the clock circuit.
מומלץ
Test and Measurement
The ICS601M-01 is applicable to test and measurement systems that need a compact, low-noise clock derived from a laboratory reference. A multiplier-based architecture can provide a higher-frequency operating clock while preserving phase coherence with the instrument's reference source. The 156MHz ceiling makes it relevant to high-speed sampling and digital control, while the 16-SOIC package simplifies board-level integration. Confirm output jitter, frequency accuracy, and reference sensitivity under the actual measurement bandwidth and required operating temperature.
מומלץ
Network Interface Timing
The ICS601M-01 can serve as a local clock multiplier in network-interface and embedded communication designs where an existing low-frequency reference is available. Generating a 156MHz-class clock from that reference may simplify distribution to serializer, controller, or Ethernet PHY blocks and can reduce reliance on additional discrete oscillators. The manufacturer's emphasis on low phase noise and low jitter helps maintain signal integrity in high-speed digital paths. Confirm that the reference source, PLL ratios, output format, and supply sequencing satisfy all devices sharing the generated clock.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור ICS601M-01 — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | ICS601M-01I | ICS601M-01T | ICS601M-01LFT | ICS601M-01ILFT | ICS601M-01IT |
|---|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 16-SOIC, 3.90mm width | 16-SOIC, 3.90mm width | 16-SOIC, 3.90mm width | 16-SOIC | 16-SOIC | 16-SOIC, 3.90mm width |
| Maximum Output Frequency | 156MHz | 156MHz | 156MHz | 156MHz | 156MHz | 156MHz |
| Output Count | 1 output | 1 output | 1 output | 1 output | 1 output | 1 output |
| Supply Voltage Range | 3V to 5.5V | 3V to 5.5V | 3V to 5.5V | 3V to 5.5V | 3V to 5.5V | 3V to 5.5V |
| Clock Architecture | PLL clock multiplier | PLL clock multiplier | PLL clock multiplier | PLL clock multiplier | PLL clock multiplier | PLL clock multiplier |
| Technology | CMOS | CMOS | CMOS | CMOS | CMOS | CMOS |
| Ordering Suffix | ICS601M-01 base ordering code | I suffix | T suffix | LFT suffix | ILFT suffix | IT suffix |
מבדילים עיקריים
- Reference-derived clock multiplication with low-noise design intent (לעומתICS601M-01I)
- Package-compatible sourcing across the same clock-multiplier family (לעומתICS601M-01T)
- Multiple suffix-specific options for procurement and production planning (לעומתICS601M-01LFT)
הערות תכנון
The manufacturer specifies 0.01uF and 0.1uF decoupling capacitors between VDD and GND, as close to the device as possible. Place each capacitor directly beside its relevant supply connection, use the shortest possible ground path, and avoid routing clock traces beneath the capacitor return area. Tight decoupling placement reduces the effective supply impedance seen by the PLL and helps prevent supply noise from appearing as clock phase noise.
Route the 156MHz-class clock output as a short, controlled-impedance trace and keep it away from switching nodes, inductors, and high-current return paths. Avoid unnecessary test pads, long pads, and branch stubs because discontinuities can create reflections that degrade the usable timing margin. If the clock must cross a larger separation, use a source termination strategy derived from the actual output impedance and receiver characteristics rather than adding an arbitrary series resistor.
Do not assume that every ICS601M-01 ordering suffix is interchangeable without checking its temperature, delivery, and qualification limits. The base, I, T, IT, LFT, and ILFT codes identify different member configurations even though the family shares a 16-SOIC footprint. Before replacement, compare the reference-input range, multiplication limits, output configuration, supply limits, and operating temperature for the exact installed and candidate MPNs.
Keep the PLL supply rail clean and within the documented 3V to 5.5V operating range. Provide adequate local energy storage for output transitions and keep switching-regulator ripple away from the clock synthesizer where the system permits separate filtering. If the PLL shares a rail with digital or RF loads, verify the rail's transient response at the operating clock frequency because supply movement can translate into output timing variation.
מידע על תאימות
No manufacturer compliance statements were identified in the cited product results. AEC-Q100 is not applicable to the base commercial ICS601M-01 ordering code unless the manufacturer documents an automotive-qualified suffix.