Microchip Technology

KSZ8851-16MQLI - 10/100 Ethernet MAC Controller | Microchip

MPN: KSZ8851-16MQLI ✓ Hoạt động
3.3 V Vdss 128-pin PQFP Package 18 KB Memory
MOQ: 1 |

KSZ8851-16MQLI Tóm tắt

The Microchip Technology KSZ8851-16MQLI is a single-port 10/100 Ethernet MAC controller with an integrated 10BASE-T and 100BASE-TX PHY, an 8-bit or 16-bit generic parallel CPU interface, and a 3.3 V supply in a 128-pin PQFP package measuring 14 x 20 mm. It supports 10 Mbit/s and 100 Mbit/s Ethernet operation for cost-effective connectivity in traditional embedded systems.

An Ethernet MAC controller is a semiconductor that connects a processor or microcontroller to a physical Ethernet network. The MAC sublayer manages frame transmission, reception, addresses, and error detection, while the integrated PHY converts between digital Ethernet data and analog signals on the network. The KSZ8851 therefore places both functions in one device instead of requiring a separate Ethernet PHY and dedicated network controller.

The KSZ8851 family provides a generic 8-bit, 16-bit, or 32-bit non-PCI interface, plus SPI interface options in the wider product family. The -16MQLI configuration is supplied in a 128-pin PQFP and includes 18 KB of on-chip memory as listed for this exact orderable part. Operating from 3.3 V, the device is suited to embedded industrial control, building automation, networking equipment, test systems, and communication appliances that require 10/100 Ethernet without a PCI interface.

The 128-pin package exposes the parallel host bus, Ethernet physical-layer signals, clock and reset inputs, power connections, and interrupt signaling. Because the device combines a PHY and MAC, PCB implementation also requires careful separation of analog and digital return paths. The manufacturer's KSZ8851-16/32MQL datasheet describes the 8-bit and 16-bit generic processor interfaces used by this configuration and provides the authoritative reference for pin assignments, timing, and electrical limits.

Typical designs connect the parallel bus to an embedded processor, an RJ45 magnetic network interface, and a 3.3 V regulator. The Ethernet magnetics perform isolation and impedance matching, while the controller manages access to the network medium. Software drivers for the KSZ8851 are used with common embedded processors, including STM32-class systems, and interrupt-driven operation reduces the need for continuous host polling.

During schematic design, reserve the Ethernet differential pair for direct connection between the PHY and network magnetics, and avoid placing high-current digital return paths beneath the analog section. Follow the reference circuit and decoupling recommendations in the manufacturer datasheet for capacitors, crystals, reset sequencing, and analog supply connections.

This page combines the exact 128-pin orderable configuration with package, interface, application, and selection information designed to help engineers evaluate the KSZ8851-16MQLI against lower-pin-count KSZ8851 options before committing a PCB layout.

Bộ thay thế dễ dàng lắp đặt cho KSZ8851-16MQLI — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với KSZ8851-16MQLI (cùng hình factor và footprint) — khác nhau ở Host Interface, Mounting Type, Product Type.

Microchip Technology
Host Interface: Generic 32-bit parallel non-PCI interface
Mounting Type: Surface-mount PQFP
Product Type: Single-port Ethernet MAC controller with integrated 10/100 PHY
So sánh với KSZ8851-16MQLI →

KSZ8851-16MQL

✅ Drop-In
📦 128-pin PQFP (14 x 20 mm)
Same 128-pin PQFP footprint and 8-bit or 16-bit parallel interface; ordering-code temperature and grade options must be confirmed, while core Ethernet ratings remain 10 Mbit/s and 100 Mbit/s.

📋 Tham chiếu thay thế (không có trong danh mục)

KSZ8851-16MQLI Thông số kỹ thuật

Product Type Single-port Ethernet MAC controller with integrated PHY
Ethernet Standard Support 10BASE-T and 100BASE-TX
Maximum Data Rate 100 Mbit/s
Supported Data Rates 10 Mbit/s and 100 Mbit/s
Host Interface 8-bit or 16-bit generic parallel non-PCI interface
Điện áp cung cấp 3.3 V
On-Chip Memory 18 KB
Number of Ports 1 Ethernet port
Package Type 128-pin PQFP
Package Dimensions 14 x 20 mm
Kiểu lắp đặt Surface mount
RoHS Compliance RoHS compliant
Manufacturer Microchip Technology
Interface Classification Ethernet controller, MAC, and PHY
Bus Interface Type Generic 8-bit or 16-bit parallel bus

Hướng dẫn cấu hình chân KSZ8851-16MQLI 14 x 20 mm

Cấu hình chân cho KSZ8851-16MQLI (14 x 20 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 14 x 20 mm cho KSZ8851-16MQLI

Không có dữ liệu chân cụ thể sẵn có cho KSZ8851-16MQLI.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

KSZ8851-16MQLI phù hợp cho 6 Áp dụngs: Embedded Industrial Control Terminals, Building Automation and HVAC Controllers, Embedded Linux and RTOS Network Nodes, Networked Test and Measurement Equipment, Communication Appliances and Gateways, Audio and Video Network Endpoints.

🏭

Embedded Industrial Control Terminals

The KSZ8851-16MQLI fits industrial control terminals that require 10/100 Ethernet for supervisory communication, configuration transfer, and remote diagnostics. Its integrated 10BASE-T and 100BASE-TX PHY removes the need for a separate Ethernet transceiver, while the generic 8-bit or 16-bit parallel interface connects efficiently to an embedded microcontroller. The 3.3 V device operates at both 10 Mbit/s and 100 Mbit/s. Place the Ethernet differential routing between the controller and network magnetics with continuous return paths, and verify the enclosure temperature requirement against the manufacturer datasheet before production release.

🏠

Building Automation and HVAC Controllers

The KSZ8851-16MQLI supports building automation controllers, HVAC gateways, and room-control units that communicate over an existing Fast Ethernet network. The 10BASE-T and 100BASE-TX functions support links from 10 Mbit/s up to 100 Mbit/s, allowing the controller to share network traffic with sensors, workstations, and supervisory systems. Its generic parallel host bus is suitable for processors without a PCI controller. The 128-pin PQFP provides the interface options required by the family, but designers should preserve the recommended analog and digital separation around the PHY and magnetics.

🖥️

Embedded Linux and RTOS Network Nodes

The KSZ8851-16MQLI is appropriate for embedded Linux or RTOS nodes that require a dedicated Fast Ethernet front end and a processor-facing parallel bus. Existing KSZ8851 driver material provides a known integration path for processors such as STM32-class devices, including interrupt-driven packet handling. At 100 Mbit/s, the controller provides a practical throughput ceiling for supervisory data, web interfaces, logging, and firmware update traffic. Firmware must select the correct 8-bit or 16-bit interface mode, connect the interrupt signal to a processor GPIO, and follow the manufacturer's reset and clock recommendations.

🔧

Networked Test and Measurement Equipment

The KSZ8851-16MQLI can add remote control and data transfer to test equipment, analyzers, and laboratory instruments. The integrated 10/100 PHY consolidates the network interface, and the generic parallel bus allows a local processor or FPGA to exchange commands and results without a PCI interface. The controller supports 10 Mbit/s and 100 Mbit/s links, which suits instrument networks handling status updates, result files, and remote commands. Keep the Ethernet pair tightly controlled and isolated from high-energy switching nodes, and confirm grounding and isolation requirements for bench or permanently installed systems.

🌐

Communication Appliances and Gateways

The KSZ8851-16MQLI is well matched to protocol gateways, serial-to-Ethernet products, and communication appliances that bridge embedded equipment with an IP network. Its integrated PHY supports standard 10BASE-T and 100BASE-TX links, while the 8-bit or 16-bit host interface gives a processor direct access to the MAC service. The 128-pin PQFP package provides a practical option when routing space is sufficient and the host bus is parallel rather than SPI. Designers should use the manufacturer's reference network circuit, provide the specified decoupling, and keep the magnetics and RJ45 interface close to the PHY connections.

📺

Audio and Video Network Endpoints

The KSZ8851-16MQLI can support networked audio, video, and control endpoints where a separate host manages media while Ethernet provides synchronization, control, or configuration traffic. The 100 Mbit/s maximum rate is appropriate for supervisory links and moderate control traffic, rather than uncompressed multi-stream video transport. The controller's parallel host bus can move packets efficiently into a processor-managed buffer, and the integrated PHY reduces the external network component count. Use interrupt-driven reception for latency-sensitive control packets and validate the complete interface timing against the manufacturer's DS00002425B datasheet.

Tóm tắt các sản phẩm được đề xuất

KSZ8851-16MQL Same-family 128-pin Ethernet controller Được sử dụng trong: Embedded Industrial Control Terminals, Building Automation and HVAC Controllers, Embedded Linux and RTOS Network Nodes, Networked Test and Measurement Equipment, Communication Appliances and Gateways, Audio and Video Network Endpoints KSZ8842-PMBL-TR Microchip Technology Được sử dụng trong: Embedded Industrial Control Terminals, Networked Test and Measurement Equipment KSZ8851-16MLL Lower-pin-count family option for area-constrained designs Được sử dụng trong: Building Automation and HVAC Controllers, Embedded Linux and RTOS Network Nodes, Communication Appliances and Gateways, Audio and Video Network Endpoints
What is the KSZ8851-16MQLI?
The KSZ8851-16MQLI is a single-port 10/100 Ethernet controller from Microchip Technology that combines a 10BASE-T/100BASE-TX PHY with a 10 Mbit/s or 100 Mbit/s Ethernet MAC. It uses an 8-bit or 16-bit generic parallel non-PCI host interface, operates from 3.3 V, and is packaged in a 128-pin PQFP measuring 14 x 20 mm. The manufacturer datasheet DS00002425B documents the interface and electrical configuration.
What Ethernet speeds does the KSZ8851-16MQLI support?
The KSZ8851-16MQLI supports 10 Mbit/s and 100 Mbit/s Ethernet through integrated 10BASE-T and 100BASE-TX physical-layer functions. It is intended for embedded systems that need cost-effective Fast Ethernet connectivity rather than Gigabit Ethernet. According to the Microchip KSZ8851 product page, the device is designed for traditional embedded systems requiring high-throughput Ethernet without a PCI interface.
What host interface does the KSZ8851-16MQLI use?
The KSZ8851-16MQLI uses a generic 8-bit or 16-bit parallel non-PCI processor interface. This allows it to connect to microcontrollers and other embedded processors that do not provide a PCI bus. The KSZ8851 family also includes configurations for 8-bit, 16-bit, or 32-bit parallel access and SPI, but the exact -16MQLI datasheet remains the primary reference for its pin assignments.
Where can I download the KSZ8851-16MQLI datasheet PDF?
The official KSZ8851-16/32MQL datasheet is available from Microchip as document DS00002425B. It covers the 128-pin PQFP configuration, the 8-bit and 16-bit generic processor interfaces, register information, timing, and electrical characteristics. Use that document when assigning PCB pins and checking signal timing; secondary copies and search indexes may differ in revision or formatting.
Where can I find the KSZ8851-16MQLI pinout?
The authoritative pinout is in the pin-description table and package drawings of Microchip datasheet DS00002425B. The KSZ8851-16MQLI uses a 128-pin PQFP, and its assignments cover the parallel host bus, Ethernet PHY connections, power, clock, reset, and interrupt functions. Use the manufacturer pin table rather than assigning connections from a package drawing alone.
What are the key specifications of KSZ8851-16MQLI that engineers should know?
The principal specifications are a 3.3 V supply, 10BASE-T and 100BASE-TX support, 10 Mbit/s and 100 Mbit/s operation, an 8-bit or 16-bit parallel host bus, 18 KB of on-chip memory, and a 128-pin PQFP package measuring 14 x 20 mm. These characteristics place the device in the cost-effective embedded Ethernet controller category. The complete electrical limits remain defined by datasheet DS00002425B.
Can KSZ8851-16MQLI be used with an STM32 microcontroller?
Yes, the KSZ8851-16MQLI can be paired with an STM32-class embedded processor because it provides a generic parallel non-PCI host interface. The KSZ8851 Ethernet driver documentation includes STM32-oriented integration examples. Firmware configuration must match the selected 8-bit or 16-bit bus mode, while the physical layer requires external network magnetics and a compliant RJ45 connection.
Is the KSZ8851-16MQLI suitable for industrial control systems?
The KSZ8851-16MQLI is functionally suitable for embedded industrial control, monitoring, and communications equipment requiring 10/100 Ethernet. Its integrated PHY simplifies the network connection and its generic parallel bus supports processors without PCI. The device's specified operating temperature range, isolation requirements, and EMC design must be confirmed from the manufacturer datasheet before use in a particular industrial enclosure.
How do I design the Ethernet layout for the KSZ8851-16MQLI?
Route the Ethernet differential pair as a controlled-impedance pair between the KSZ8851-16MQLI and the network magnetics, with no plane splits or high-current switching paths beneath the interface. Follow the reference circuit and component-placement guidance in datasheet DS00002425B. The controller's digital host bus, analog PHY connections, and supply return paths should be arranged to minimize coupling between the Ethernet and processor domains.
When should I choose the KSZ8851-16MQLI over a smaller KSZ8851 package?
Choose the KSZ8851-16MQLI when the design needs the 128-pin PQFP configuration with its 8-bit or 16-bit generic parallel interface and the associated pin assignment. A smaller 48-pin LQFP member of the KSZ8851 family, such as KSZ8851-16MLL, reduces board area but is not a pin-compatible drop-in replacement. Select according to the required bus width, PCB area, and routing complexity.
What is the best drop-in replacement for the KSZ8851-16MQLI?
The KSZ8851-16MQL is the closest same-footprint option because it belongs to the same 128-pin PQFP KSZ8851-16/32MQL family and preserves the physical land pattern. Temperature-grade and ordering details must be checked before substitution. Smaller KSZ8851 packages use a different pin count and are not drop-in replacements for an existing 128-pin PCB.
Can the KSZ8851-16MQLI replace a KSZ8851-16MQL design?
The KSZ8851-16MQLI can be considered for a KSZ8851-16MQL design when both use the same 128-pin PQFP land pattern and the required interface and temperature grades are compatible. Because the -16MQL and -16/32MQL documentation share the 128-pin family, the mechanical footprint is consistent, but device configuration and environmental ratings must be confirmed against the specific ordering codes.
What is the best cross-brand equivalent for the KSZ8851-16MQLI?
No cross-brand drop-in equivalent is established for the KSZ8851-16MQLI. Its defining combination is a 128-pin PQFP footprint, an 8-bit or 16-bit generic parallel interface, an integrated 10/100 PHY, and the KSZ8851 register and driver model. A controller with only similar Ethernet performance is not a drop-in replacement because host-bus pins, interrupt behavior, and register access would differ.
Where can I buy the KSZ8851-16MQLI and what is the current lead time?
Use the Request a Quote form on this page to ask about KSZ8851-16MQLI availability, current lead time, minimum order quantity, and shipment method. The quote workflow confirms the exact suffix, quantity, and delivery destination rather than relying on a generic listing. For production planning, request a written lead-time confirmation at the quantity required by your build schedule.
How does the KSZ8851-16MQLI compare with the KSZ8851-16MLL?
The KSZ8851-16MQLI is supplied in a 128-pin PQFP measuring 14 x 20 mm, while the KSZ8851-16MLL is a 48-pin LQFP member of the same controller family. Both target embedded 10/100 Ethernet systems with generic processor interfaces, but the package size, pin count, and board-area requirements differ. The 48-pin device is a footprint alternative for a new design, not a drop-in replacement on the 128-pin PCB.

Dữ liệu tham khảo kỹ thuật cho KSZ8851-16MQLI — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the KSZ8851-16MQLI when your design requires a 128-pin PQFP footprint, an 8-bit or 16-bit generic parallel host interface, and an integrated 10/100 Ethernet PHY. The KSZ8851-16MQL is the closest same-family, same-footprint option when its ordering-code temperature and grade requirements satisfy the product specification. Consider the KSZ8851-16MLL only for a new PCB where reducing package size from 128 pins to 48 pins matters more than reusing the 128-pin land pattern. A cross-brand controller with similar link speed should not be treated as a drop-in replacement because the host-bus assignment, interrupt behavior, and register architecture may differ. Final selection should confirm package drawings, interface mode, clock and reset requirements, environmental ratings, driver support, and the complete electrical specification in the manufacturer datasheet.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này KSZ8851-16MQL
Brand Microchip Technology Microchip Technology
Package 128-pin PQFP (14 x 20 mm) 128-pin PQFP (14 x 20 mm)
Ethernet Speed Support 10 Mbit/s and 100 Mbit/s 10 Mbit/s and 100 Mbit/s
Physical Layer Integrated 10BASE-T and 100BASE-TX PHY Integrated 10BASE-T and 100BASE-TX PHY
Host Interface 8-bit or 16-bit generic parallel non-PCI 8-bit or 16-bit generic parallel non-PCI
Supply Voltage 3.3 V 3.3 V
On-Chip Memory 18 KB 18 KB
Port Count 1 Ethernet port 1 Ethernet port

Bảo phân biệt quan trọng

  • Higher pin count provides a larger 128-pin interface implementation (vsKSZ8851-16MLL)
  • Integrated 10/100 PHY reduces external network component count (vsKSZ8851-16MQL)
  • Parallel host bus suits processors without PCI support (vsKSZ8851-16MQL)

Ghi chú thiết kế

Route the Ethernet differential pair as a continuous, controlled-impedance connection between the KSZ8851-16MQLI and the network magnetics. Do not split the ground or power plane beneath the pair, and keep high-current switching paths away from the PHY section. Follow the component placement and reference network circuit in datasheet DS00002425B, and use the shortest practical path from the controller to the magnetics.

Decouple the 3.3 V supply at the controller with the capacitance and placement specified by the manufacturer reference circuit. Separate noisy digital return paths from the Ethernet PHY return connections wherever the layout permits. Review the datasheet for all supply pins, analog and digital supply requirements, and power-up sequencing before assigning the printed-board power network.

Do not substitute a 48-pin KSZ8851 member for this 128-pin device on an existing board. Although the controller family supports similar Ethernet functions, the smaller KSZ8851-16MLL uses a different footprint and pin arrangement. Also configure the firmware for the physical 8-bit or 16-bit host-bus mode actually used on the PCB, because an incorrect bus-width setting prevents normal controller operation.

Thông tin tuân thủ

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

RoHS compliance is stated for this exact orderable part. REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification statements require confirmation from the manufacturer or an authorized compliance document.

Dữ liệu được xác minh vào: 2026-11-18 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ksz8851 16mll ksz8851 datasheet ksz8851 eval board ksz8851 16mlli ksz8851 pdf ksz8851 16mql microchip ksz8851 micrel ksz8851 KSZ8851-16MQLI datasheet KSZ8851-16MQLI pinout KSZ8851-16MQLI 128 pin PQFP KSZ8851-16MQLI equivalent KSZ8851-16MQLI replacement KSZ8851-16MQLI price KSZ8851-16MQLI stock

Các bộ phận và thuật ngữ liên quan

Microchip Technology Micrel Semiconductor KSZ8851-16MQLI KSZ8851-16MQL KSZ8851-16MLL KSZ8851 Ethernet MAC controller Ethernet PHY 10BASE-T 100BASE-TX Fast Ethernet 10 Mbit/s 100 Mbit/s generic parallel interface non-PCI interface 3.3 V supply 18 KB on-chip memory PQFP package 128-pin PQFP surface mount embedded systems industrial control network interface RoHS network magnetics RJ45
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ