LAN8710A-EZC-ABC - 10/100 Ethernet PHY | Microchip
MPN: LAN8710A-EZC-ABC ✓ Hoạt độngLAN8710A-EZC-ABC Tóm tắt
An Ethernet PHY is the physical-layer device that converts digital MAC data into electrical signals suitable for twisted-pair cabling and recovers incoming signals for the Ethernet controller. It belongs to the network-interface hierarchy: Ethernet transceiver > physical-layer transceiver > Ethernet interface IC > semiconductor. The LAN8710A family targets consumer, industrial, and enterprise equipment where a compact 10/100 Ethernet connection is required.
Key features include support for both MII and RMII host interfaces, automatic negotiation of speed and duplex mode, and HP Auto-MDIX operation for direct or crossover cable connections. The variable-voltage digital interface allows the PHY to connect with a broad range of MAC hardware. Its 32-SQFN 5 mm by 5 mm package supports compact embedded systems without requiring a large connector or external magnetics beside the PHY itself.
The LAN8710A architecture separates the Ethernet medium-access function from the host controller, leaving the MAC and protocol stack to an embedded processor or dedicated network controller. MII provides a wider parallel interface, while RMII reduces the number of digital signals required for designs with constrained pin count. Automatic negotiation allows the link partner and PHY to select the highest mutually supported speed and duplex mode.
Typical applications include embedded Linux systems, industrial Ethernet controllers, set-top boxes, printers, game consoles, security equipment, and compact IoT gateways. The 10/100 capability is suitable for management networks and legacy equipment that has not migrated to Gigabit Ethernet. An external Ethernet magnetics module and suitably terminated line-side network path remain required because the PHY does not incorporate the physical cable transformer.
Design the PCB around the manufacturer reference schematic, particularly the exposed-pad ground connection, short high-frequency supply routes, and controlled-length digital interfaces. Verify power sequencing, clock requirements, and MII or RMII signal integrity with the MAC controller and cable configuration used in the final system.
This product page combines the manufacturer family specifications, verified ordering information, package details, application guidance, and engineering design notes to support component selection, PCB planning, and drop-in replacement evaluation.
Bộ thay thế dễ dàng lắp đặt cho LAN8710A-EZC-ABC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LAN8710A-EZC-ABC (cùng hình factor và footprint) — khác nhau ở Package.
LAN8710AI-EZC
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LAN8710AI-EZK
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LAN8710A-EZK
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LAN8710A-EZC-ABC Thông số kỹ thuật
| Product Type | 10/100 Ethernet physical-layer transceiver |
| Supported Data Rates | 10 Mbps and 100 Mbps |
| Ethernet Standards | 10BASE-T and 100BASE-TX |
| MAC Interface | MII or RMII |
| Number of MAC Interfaces | 4/4 transceiver |
| Auto-Negotiation | Supported |
| HP Auto-MDIX | Supported |
| Power Technology | Microchip flexPWR technology |
| Hộp | 32-SQFN, 5 mm x 5 mm |
| Số chân | 32 pins |
| Kiểu lắp đặt | Surface mount |
| Extended Commercial Temperature Option | 0 °C to 85 °C |
| Industrial Temperature Option | -40 °C to 85 °C |
Hướng dẫn cấu hình chân LAN8710A-EZC-ABC 32-sqfn, 5 mm x 5 mm
Cấu hình chân cho LAN8710A-EZC-ABC (32-sqfn, 5 mm x 5 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho LAN8710A-EZC-ABC.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LAN8710A-EZC-ABC phù hợp cho 6 Áp dụngs: Embedded Linux Ethernet Gateway, Industrial Network Terminal, Networked Security Camera, Networked Printer, IoT Sensor Gateway, Set-Top Box and Consumer Media Device.
Embedded Linux Ethernet Gateway
The LAN8710A-EZC-ABC is suitable for an embedded Linux gateway that requires 10/100 Ethernet beside a host processor. Its MII interface supports a parallel MAC connection, while RMII can reduce host-controller pin usage where board space is constrained. According to the Microchip Technology product page, automatic negotiation selects the supported speed and duplex mode, and HP Auto-MDIX accepts direct or crossover cables. Place the PHY close to the Ethernet magnetics, use a continuous ground plane under the exposed pad, and follow the manufacturer reference schematic for supply and clock routing.
Được đề xuất
Industrial Network Terminal
The LAN8710A-EZC-ABC supports 10BASE-T and 100BASE-TX links in compact industrial terminals that retain legacy copper Ethernet connectivity. The family is available with an industrial temperature option covering -40 °C to 85 °C, so the correct EZK ordering route should be evaluated when the enclosure lacks climate control. Automatic negotiation and HP Auto-MDIX simplify field connections, while the 32-SQFN footprint preserves board area. Validate magnetics isolation, surge exposure, grounding, and cable-port creepage according to the product installation requirements.
Được đề xuất
Networked Security Camera
A security camera or imaging accessory can use the LAN8710A-EZC-ABC for a compact 10/100 management and data path. The PHY occupies a 5 mm by 5 mm 32-SQFN footprint and supports MII or RMII host connectivity, allowing it to pair with an embedded processor without a large transceiver package. Auto-negotiation accommodates installed network infrastructure, while HP Auto-MDIX removes cable-polarity concerns at the port. Keep the digital interface away from the transformer and line-side routing, and use controlled-layout interfaces to prevent switching noise from coupling into the digital links.
Được đề xuất
Networked Printer
The LAN8710A-EZC-ABC can provide physical-layer connectivity in a printer, scanner, or print server that uses a 10/100 Ethernet interface. Automatic negotiation permits the printer to connect to both 10 Mbps and 100 Mbps infrastructure, and HP Auto-MDIX supports common office cabling without manual crossover configuration. The MII interface is appropriate for controllers with parallel bus resources, while RMII may reduce pin count in compact embedded systems. The PHY still requires external Ethernet magnetics, so allocate connector, isolation, and routing space according to the manufacturer reference design.
Được đề xuất
IoT Sensor Gateway
The LAN8710A-EZC-ABC is useful in an IoT gateway that bridges sensors or local processors to an existing 10/100 Ethernet network. Its small 32-SQFN package is advantageous in compact controllers, and the choice between MII and RMII lets the designer balance host-controller resources against routing simplicity. According to the Microchip Technology product page, the family uses low-power flexPWR technology and supports consumer, industrial, and enterprise applications. Preserve the exposed-pad thermal path and keep the line-side copper away from sensitive sensor and wireless circuits.
Được đề xuất
Set-Top Box and Consumer Media Device
A set-top box, game console, or media appliance can use the LAN8710A-EZC-ABC to add 10/100 Ethernet without the larger footprint of a multiport controller. Its low-power Ethernet PHY supports MII and RMII, automatic speed negotiation, and HP Auto-MDIX in a 5 mm by 5 mm package. These functions suit consumer networks where interoperability and cable convenience are important. Design the interface so the host clock and RMII or MII signals meet the manufacturer's timing and routing guidance, and terminate the external magnetics according to the referenced network interface design.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LAN8710A-EZC-ABC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LAN8710AI-EZC | LAN8710AI-EZK | LAN8710A-EZK |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 32-SQFN (5x5) | 32-QFN (5x5) | 32-QFN (5x5) | 32-QFN (5x5) |
| Supported Data Rates | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps | 10 Mbps and 100 Mbps |
| Ethernet Support | 10BASE-T/100BASE-TX | 10BASE-T/100BASE-TX | 10BASE-T/100BASE-TX | 10BASE-T/100BASE-TX |
| MAC Interface | MII or RMII | MII or RMII | MII or RMII | MII or RMII |
| Auto-Negotiation | Supported | Supported | Supported | Supported |
| HP Auto-MDIX | Supported | Supported | Supported | Supported |
| Temperature Grade | Extended commercial family; exact EZC-ABC range requires confirmation | Industrial: -40 °C to 85 °C | Industrial: -40 °C to 85 °C | Industrial: -40 °C to 85 °C |
| Power Technology | flexPWR technology | flexPWR technology | flexPWR technology | flexPWR technology |
| Integrated Ethernet Magnetics | Not integrated; external magnetics required | Not integrated; external magnetics required | Not integrated; external magnetics required | Not integrated; external magnetics required |
Bảo phân biệt quan trọng
- Supports both parallel MII and compact RMII host interfaces (vsLAN8710AI-EZC)
- Simplifies common office and industrial cable connections (vsLAN8710AI-EZK)
- Offers a small 5 mm by 5 mm Ethernet PHY footprint (vsLAN8710A-EZK)
Ghi chú thiết kế
Follow the manufacturer reference schematic and pin-description table for the 32-SQFN layout. Keep the RMII or MII routes short, provide a continuous ground reference beneath the device, and connect the exposed thermal pad to ground through the prescribed via pattern. Avoid placing the Ethernet line-side traces beneath digital interface routes because transformer-side currents can couple into the low-level MII or RMII signals.
Separate the line-side network path from the MAC and supply paths. Route the differential pairs through the specified 100-ohm differential impedance structure, keep the PHY-to-magnetics section compact, and observe the manufacturer spacing guidance around the transformer and connector. HP Auto-MDIX handles cable polarity, but it does not remove the need for controlled impedance, balanced routing, and compliant magnetics.
Decouple the PHY at its supply pins with the capacitance and placement specified in the manufacturer application circuit. Confirm the exact operating voltage, allowable source impedance, clock requirements, and power-up sequence for LAN8710A-EZC-ABC in the electrical-characteristics table before committing the power tree. Avoid deriving a supply limit from a different ordering suffix without checking the exact part documentation.
Validate MII or RMII timing against the selected host controller, trace lengths, layer transitions, and clock source. The manufacturer supports a variable-voltage digital host interface, but that feature does not eliminate timing or level compatibility checks. For RMII designs, follow the prescribed reference-clock connection and routing arrangement; for MII designs, inspect setup and hold margins across every supported operating condition.
Do not treat auto-negotiation, auto-MDIX, or the PHY itself as a replacement for external Ethernet magnetics and a correctly terminated cable interface. Also avoid substituting an industrial, reel-order, or differently suffixed LAN8710A part solely because its nominal speed rating matches. Confirm the complete ordering code, temperature grade, package drawing, pin mapping, and exposed-pad requirements together.
Thông tin tuân thủ
The LAN8710A family is marketed for consumer, industrial, and enterprise applications, but exact declarations for LAN8710A-EZC-ABC require the manufacturer product or material-compliance documentation.