Microchip Technology

LAN8710A-EZC-ABC - 10/100 Ethernet PHY | Microchip

MPN: LAN8710A-EZC-ABC ✓ Active
10BASE-T and 100BASE-TX Rds(on) 32-SQFN, 5 mm x 5 mm Package
MOQ: 1 |

LAN8710A-EZC-ABC Overview

Microchip Technology LAN8710A-EZC-ABC is a low-power 10BASE-T/100BASE-TX Ethernet physical-layer transceiver supporting 10 Mbps and 100 Mbps operation, with MII and RMII MAC interfaces, in a 32-pin SQFN package measuring 5 mm by 5 mm.

An Ethernet PHY is the physical-layer device that converts digital MAC data into electrical signals suitable for twisted-pair cabling and recovers incoming signals for the Ethernet controller. It belongs to the network-interface hierarchy: Ethernet transceiver > physical-layer transceiver > Ethernet interface IC > semiconductor. The LAN8710A family targets consumer, industrial, and enterprise equipment where a compact 10/100 Ethernet connection is required.

Key features include support for both MII and RMII host interfaces, automatic negotiation of speed and duplex mode, and HP Auto-MDIX operation for direct or crossover cable connections. The variable-voltage digital interface allows the PHY to connect with a broad range of MAC hardware. Its 32-SQFN 5 mm by 5 mm package supports compact embedded systems without requiring a large connector or external magnetics beside the PHY itself.

The LAN8710A architecture separates the Ethernet medium-access function from the host controller, leaving the MAC and protocol stack to an embedded processor or dedicated network controller. MII provides a wider parallel interface, while RMII reduces the number of digital signals required for designs with constrained pin count. Automatic negotiation allows the link partner and PHY to select the highest mutually supported speed and duplex mode.

Typical applications include embedded Linux systems, industrial Ethernet controllers, set-top boxes, printers, game consoles, security equipment, and compact IoT gateways. The 10/100 capability is suitable for management networks and legacy equipment that has not migrated to Gigabit Ethernet. An external Ethernet magnetics module and suitably terminated line-side network path remain required because the PHY does not incorporate the physical cable transformer.

Design the PCB around the manufacturer reference schematic, particularly the exposed-pad ground connection, short high-frequency supply routes, and controlled-length digital interfaces. Verify power sequencing, clock requirements, and MII or RMII signal integrity with the MAC controller and cable configuration used in the final system.

This product page combines the manufacturer family specifications, verified ordering information, package details, application guidance, and engineering design notes to support component selection, PCB planning, and drop-in replacement evaluation.

Drop-in alternatives for LAN8710A-EZC-ABC — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with LAN8710A-EZC-ABC (same form factor and footprint) — differing in Package.

Microchip Technology
Package: 32-QFN, 5 mm x 5 mm
Compare with LAN8710A-EZC-ABC →

LAN8710AI-EZC

✅ Drop-In
📦 32-QFN (5x5)
Same 10 Mbps and 100 Mbps rates, MII/RMII interfaces, and 32-pin footprint; industrial-grade designation changes the operating temperature grade by 40 °C at the cold limit.

📋 Reference alternative (not in catalog)

LAN8710AI-EZK

✅ Drop-In
📦 32-QFN (5x5)
Same 10 Mbps and 100 Mbps rates, MII/RMII interfaces, and 32-pin footprint; industrial-grade designation provides a 40 °C colder lower temperature limit.

📋 Reference alternative (not in catalog)

LAN8710A-EZK

✅ Drop-In
Microchip Technology
📦 32-QFN (5x5)
10/100 Ethernet physical-layer transceiver · 10 Mbps and 100 Mbps · 10BASE-T and 100BASE-TX · MII and RMII · IEEE 802.3-2005 · Full-duplex · HP Auto-MDIX · Auto-negotiation

Contact for price

View Datasheet →

LAN8710A-EZC-ABC Specifications

Product Type 10/100 Ethernet physical-layer transceiver
Supported Data Rates 10 Mbps and 100 Mbps
Ethernet Standards 10BASE-T and 100BASE-TX
MAC Interface MII or RMII
Number of MAC Interfaces 4/4 transceiver
Auto-Negotiation Supported
HP Auto-MDIX Supported
Power Technology Microchip flexPWR technology
Package 32-SQFN, 5 mm x 5 mm
Pin Count 32 pins
Mounting Type Surface mount
Extended Commercial Temperature Option 0 °C to 85 °C
Industrial Temperature Option -40 °C to 85 °C

LAN8710A-EZC-ABC 32-sqfn, 5 mm x 5 mm Pin Configuration Guide

Pin configuration for LAN8710A-EZC-ABC (32-sqfn, 5 mm x 5 mm package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

32-sqfn, 5 mm x 5 mm package pinout diagram for LAN8710A-EZC-ABC

No detailed pinout data available for LAN8710A-EZC-ABC.

Refer to the datasheet for full pin configuration.

Typical Applications

LAN8710A-EZC-ABC is suitable for 6 applications: Embedded Linux Ethernet Gateway, Industrial Network Terminal, Networked Security Camera, Networked Printer, IoT Sensor Gateway, Set-Top Box and Consumer Media Device.

🌐

Embedded Linux Ethernet Gateway

The LAN8710A-EZC-ABC is suitable for an embedded Linux gateway that requires 10/100 Ethernet beside a host processor. Its MII interface supports a parallel MAC connection, while RMII can reduce host-controller pin usage where board space is constrained. According to the Microchip Technology product page, automatic negotiation selects the supported speed and duplex mode, and HP Auto-MDIX accepts direct or crossover cables. Place the PHY close to the Ethernet magnetics, use a continuous ground plane under the exposed pad, and follow the manufacturer reference schematic for supply and clock routing.

🏭

Industrial Network Terminal

The LAN8710A-EZC-ABC supports 10BASE-T and 100BASE-TX links in compact industrial terminals that retain legacy copper Ethernet connectivity. The family is available with an industrial temperature option covering -40 °C to 85 °C, so the correct EZK ordering route should be evaluated when the enclosure lacks climate control. Automatic negotiation and HP Auto-MDIX simplify field connections, while the 32-SQFN footprint preserves board area. Validate magnetics isolation, surge exposure, grounding, and cable-port creepage according to the product installation requirements.

🎥

Networked Security Camera

A security camera or imaging accessory can use the LAN8710A-EZC-ABC for a compact 10/100 management and data path. The PHY occupies a 5 mm by 5 mm 32-SQFN footprint and supports MII or RMII host connectivity, allowing it to pair with an embedded processor without a large transceiver package. Auto-negotiation accommodates installed network infrastructure, while HP Auto-MDIX removes cable-polarity concerns at the port. Keep the digital interface away from the transformer and line-side routing, and use controlled-layout interfaces to prevent switching noise from coupling into the digital links.

🖨️

Networked Printer

The LAN8710A-EZC-ABC can provide physical-layer connectivity in a printer, scanner, or print server that uses a 10/100 Ethernet interface. Automatic negotiation permits the printer to connect to both 10 Mbps and 100 Mbps infrastructure, and HP Auto-MDIX supports common office cabling without manual crossover configuration. The MII interface is appropriate for controllers with parallel bus resources, while RMII may reduce pin count in compact embedded systems. The PHY still requires external Ethernet magnetics, so allocate connector, isolation, and routing space according to the manufacturer reference design.

🧩

IoT Sensor Gateway

The LAN8710A-EZC-ABC is useful in an IoT gateway that bridges sensors or local processors to an existing 10/100 Ethernet network. Its small 32-SQFN package is advantageous in compact controllers, and the choice between MII and RMII lets the designer balance host-controller resources against routing simplicity. According to the Microchip Technology product page, the family uses low-power flexPWR technology and supports consumer, industrial, and enterprise applications. Preserve the exposed-pad thermal path and keep the line-side copper away from sensitive sensor and wireless circuits.

📺

Set-Top Box and Consumer Media Device

A set-top box, game console, or media appliance can use the LAN8710A-EZC-ABC to add 10/100 Ethernet without the larger footprint of a multiport controller. Its low-power Ethernet PHY supports MII and RMII, automatic speed negotiation, and HP Auto-MDIX in a 5 mm by 5 mm package. These functions suit consumer networks where interoperability and cable convenience are important. Design the interface so the host clock and RMII or MII signals meet the manufacturer's timing and routing guidance, and terminate the external magnetics according to the referenced network interface design.

What is the LAN8710A-EZC-ABC?
The LAN8710A-EZC-ABC is a Microchip Technology 10/100 Ethernet physical-layer transceiver for connecting an Ethernet MAC to 10BASE-T and 100BASE-TX twisted-pair networks. According to the Microchip LAN8710A product page, it supports 10 Mbps and 100 Mbps operation, MII or RMII host interfaces, automatic negotiation, and HP Auto-MDIX in a compact 32-SQFN package measuring 5 mm by 5 mm.
Where can I download the LAN8710A-EZC-ABC datasheet PDF?
The LAN8710A-EZC-ABC datasheet documentation is available through the Microchip Technology LAN8710A product page at https://www.microchip.com/en-us/product/LAN8710A. The manufacturer documentation provides the device description, electrical characteristics, interface information, and application guidance for the LAN8710A family. Confirm the exact suffix ordering code and package details against the target MPN before releasing the PCB design.
Where can I find the LAN8710A-EZC-ABC pinout?
The LAN8710A-EZC-ABC pin assignment is documented in the manufacturer LAN8710A pin-description table and package drawing. According to the Microchip Technology LAN8710A documentation, this exact device uses a 32-SQFN 5 mm by 5 mm package. Use the ordered pin-description table and exposed-pad connection details for PCB routing rather than relying on a generic third-party package illustration.
What are the key specifications of LAN8710A-EZC-ABC that engineers should know?
The LAN8710A-EZC-ABC is a 10/100 Ethernet PHY with MII and RMII host interfaces, automatic speed-and-duplex negotiation, and HP Auto-MDIX. According to the Microchip Technology LAN8710A product page, the family supports consumer, industrial, and enterprise applications and uses flexPWR low-power technology. The target is packaged as a 32-SQFN measuring 5 mm by 5 mm, while its exact electrical limits should be confirmed in the manufacturer data sheet.
What is the operating voltage of LAN8710A-EZC-ABC?
The exact operating supply-voltage range for the LAN8710A-EZC-ABC must be confirmed in the Microchip Technology LAN8710A datasheet before design release. The related LAN8710A-EZC listing identifies a 1.6 V to 3.6 V supply range, but that listing represents a different ordering suffix and should not automatically be treated as the exact target specification. Use the electrical-characteristics table for LAN8710A-EZC-ABC as the controlling requirement.
What is the difference between MII and RMII on the LAN8710A-EZC-ABC?
MII and RMII are both digital MAC-to-PHY interfaces supported by the LAN8710A-EZC-ABC, but they differ in signal width and implementation requirements. According to the Microchip Technology product page, the MAC connection uses a variable-voltage digital MII or RMII interface. MII generally requires more parallel signals, while RMII reduces interface pin count and is commonly selected where board routing or host-controller resources are constrained.
Does the LAN8710A-EZC-ABC support auto-negotiation and auto-MDIX?
Yes, the LAN8710A-EZC-ABC supports automatic negotiation and HP Auto-MDIX operation. According to the Microchip Technology documentation, automatic negotiation determines the best supported speed and duplex mode, while HP Auto-MDIX permits use of either direct-connect or crossover Ethernet cables. These functions simplify link establishment, although cable quality, termination, and the selected Ethernet magnetics still require normal network-design validation.
What is the temperature range of the LAN8710A-EZC-ABC?
The exact temperature grade for LAN8710A-EZC-ABC must be selected from the ordering information rather than inferred only from the family name. According to the Microchip Technology LAN8710A product page, the family is offered in extended commercial versions covering 0 °C to 85 °C and industrial versions covering -40 °C to 85 °C. Confirm the EZC-ABC order code against the manufacturer package drawing and qualification documentation.
What is the price of LAN8710A-EZC-ABC?
Use the Request a Quote form on this page for the current unit price and volume pricing for LAN8710A-EZC-ABC. The Microchip Technology LAN8710A product page identifies the device as an available family member, while commercial terms can change with quantity, packaging, and market conditions. The platform therefore renders current commercial terms separately from the technical specifications and qualification information on this page.
Where can I buy LAN8710A-EZC-ABC online?
The XAIPART Request a Quote form on this page is the preferred route for obtaining LAN8710A-EZC-ABC availability, lead time, and commercial terms. According to the Microchip Technology product page, LAN8710A is part of the active 10/100 Ethernet transceiver family. Provide the required quantity, target package, and any production timing constraints so the quote can be matched to the exact ordering suffix.
Is LAN8710A-EZC-ABC in stock and what is its lead time?
Request a Quote on this page for current LAN8710A-EZC-ABC stock status, scheduled shipment, and lead time. According to the Microchip Technology LAN8710A product page, the family supports consumer, industrial, and enterprise designs, but exact inventory and factory timing are commercial conditions that can change. Include the annual and build quantities when requesting a quote because those details materially affect allocation and production planning.
LAN8710A-EZC-ABC vs LAN8710A-EZK-ABC: which is better for an industrial design?
LAN8710A-EZK-ABC is generally the candidate to evaluate first for an industrial design because the EZK ordering family is associated with the industrial-temperature option, while LAN8710A-EZC-ABC belongs to the extended-commercial family. According to the Microchip Technology LAN8710A product page, the respective ranges are -40 °C to 85 °C and 0 °C to 85 °C. Both retain 10/100 Ethernet, MII/RMII, auto-negotiation, and HP Auto-MDIX functions.
When should I choose LAN8710A-EZC-ABC over another 10/100 Ethernet PHY?
Choose LAN8710A-EZC-ABC when a design needs a compact 10/100 Ethernet PHY with both MII and RMII host-interface choices, automatic negotiation, HP Auto-MDIX, and a 32-SQFN footprint. According to the Microchip Technology product page, the device is designed for consumer, industrial, and enterprise applications. It is less suitable when Gigabit Ethernet, integrated magnetics, or an industrial temperature grade is required but unavailable in the selected order code.
What is the best drop-in replacement for LAN8710A-EZC-ABC?
The closest drop-in candidates are LAN8710AI-EZC, LAN8710AI-EZK, and LAN8710A-EZK when their temperature grade and ordering form match the PCB and production requirements. According to the manufacturer product page, the alternatives retain the same LAN8710A-family 10/100 Ethernet, MII/RMII, auto-negotiation, and HP Auto-MDIX functions in 32-SQFN packages. Verify the exposed-pad layout, clock configuration, and exact temperature suffix before substitution.
Can LAN8720A-CP-TR replace LAN8710A-EZC-ABC on the same PCB?
The LAN8720A-CP-TR should not be assumed to be a direct drop-in replacement for LAN8710A-EZC-ABC. Although both are Microchip 10/100 Ethernet PHYs, the available cross-reference information does not establish identical 32-SQFN pin assignments, interface voltage compatibility, exposed-pad requirements, or timing. According to the Microchip Technology product documentation, verify every pin and power condition in the manufacturer package drawing before considering a board-level substitution.

Engineering reference data for LAN8710A-EZC-ABC — comparison, design guidance, and compliance information.

Selection Guide

Choose LAN8710A-EZC-ABC for a compact 10/100 Ethernet design that needs selectable MII or RMII connectivity, automatic negotiation, and HP Auto-MDIX. Its 32-SQFN 5 mm by 5 mm package is especially useful where a larger Ethernet controller would consume unnecessary board area. Select LAN8710AI-EZC or LAN8710AI-EZK when the industrial temperature grade is preferable, and select LAN8710A-EZK when that is the appropriate Microchip ordering route. These alternatives preserve the principal 10/100 Ethernet functions and package family, but the suffix must match the environmental requirement. Do not assume that every Ethernet PHY with the same data rate is interchangeable: the pin map, exposed pad, interface voltage, clock arrangement, and magnetics topology must also match. For designs requiring Gigabit Ethernet, integrated magnetics, or a different connector strategy, evaluate a device specifically designed for those requirements rather than using a footprint-only substitution.

Comparison with Alternatives

Parameter This Product LAN8710AI-EZC LAN8710AI-EZK LAN8710A-EZK
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 32-SQFN (5x5) 32-QFN (5x5) 32-QFN (5x5) 32-QFN (5x5)
Supported Data Rates 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps
Ethernet Support 10BASE-T/100BASE-TX 10BASE-T/100BASE-TX 10BASE-T/100BASE-TX 10BASE-T/100BASE-TX
MAC Interface MII or RMII MII or RMII MII or RMII MII or RMII
Auto-Negotiation Supported Supported Supported Supported
HP Auto-MDIX Supported Supported Supported Supported
Temperature Grade Extended commercial family; exact EZC-ABC range requires confirmation Industrial: -40 °C to 85 °C Industrial: -40 °C to 85 °C Industrial: -40 °C to 85 °C
Power Technology flexPWR technology flexPWR technology flexPWR technology flexPWR technology
Integrated Ethernet Magnetics Not integrated; external magnetics required Not integrated; external magnetics required Not integrated; external magnetics required Not integrated; external magnetics required

Key Differentiators

  • Supports both parallel MII and compact RMII host interfaces (vs LAN8710AI-EZC)
  • Simplifies common office and industrial cable connections (vs LAN8710AI-EZK)
  • Offers a small 5 mm by 5 mm Ethernet PHY footprint (vs LAN8710A-EZK)

Design Notes

Follow the manufacturer reference schematic and pin-description table for the 32-SQFN layout. Keep the RMII or MII routes short, provide a continuous ground reference beneath the device, and connect the exposed thermal pad to ground through the prescribed via pattern. Avoid placing the Ethernet line-side traces beneath digital interface routes because transformer-side currents can couple into the low-level MII or RMII signals.

Separate the line-side network path from the MAC and supply paths. Route the differential pairs through the specified 100-ohm differential impedance structure, keep the PHY-to-magnetics section compact, and observe the manufacturer spacing guidance around the transformer and connector. HP Auto-MDIX handles cable polarity, but it does not remove the need for controlled impedance, balanced routing, and compliant magnetics.

Decouple the PHY at its supply pins with the capacitance and placement specified in the manufacturer application circuit. Confirm the exact operating voltage, allowable source impedance, clock requirements, and power-up sequence for LAN8710A-EZC-ABC in the electrical-characteristics table before committing the power tree. Avoid deriving a supply limit from a different ordering suffix without checking the exact part documentation.

Validate MII or RMII timing against the selected host controller, trace lengths, layer transitions, and clock source. The manufacturer supports a variable-voltage digital host interface, but that feature does not eliminate timing or level compatibility checks. For RMII designs, follow the prescribed reference-clock connection and routing arrangement; for MII designs, inspect setup and hold margins across every supported operating condition.

Do not treat auto-negotiation, auto-MDIX, or the PHY itself as a replacement for external Ethernet magnetics and a correctly terminated cable interface. Also avoid substituting an industrial, reel-order, or differently suffixed LAN8710A part solely because its nominal speed rating matches. Confirm the complete ordering code, temperature grade, package drawing, pin mapping, and exposed-pad requirements together.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The LAN8710A family is marketed for consumer, industrial, and enterprise applications, but exact declarations for LAN8710A-EZC-ABC require the manufacturer product or material-compliance documentation.

Data verified on: 2026-11-14 — data verified and curated by XAIPART's component engineering team

Related Searches

lan8710a ezc abc lan8710a datasheet lan8710a ezc lan8710a ezc tr lan8710a ezc qfn32 lan8710a ezc datasheet lan8710a reference schematic lan8710a esp32 LAN8710A-EZC-ABC pinout LAN8710A-EZC-ABC replacement LAN8710A-EZC-ABC footprint LAN8710A-EZC-ABC price Microchip LAN8710A-EZC-ABC LAN8710A-EZC-ABC vs LAN8720A-CP-TR LAN8710A-EZC-ABC application circuit

Related Components & Terms

Microchip Technology LAN8710A-EZC-ABC LAN8710AI-EZC LAN8710AI-EZK LAN8710A-EZK Ethernet PHY physical-layer transceiver Ethernet interface IC network interface 10BASE-T 100BASE-TX MII RMII auto-negotiation HP Auto-MDIX flexPWR 32-SQFN QFN family surface mount SMD embedded Linux industrial Ethernet IoT gateway IEEE 802.3 IEEE 802.3u external Ethernet magnetics Ethernet MAC
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details