Microchip Technology

LAN91C111-NC 10/100 Ethernet MAC/PHY | Microchip Technology

MPN: LAN91C111-NC ✗ Cuối đời
2.97 V to 3.63 V Vdss 128-pin TQFP, 14 mm x 14 mm Package 8 KB Memory
MOQ: 1 |

LAN91C111-NC Tóm tắt

The Microchip Technology LAN91C111-NC is a mixed-signal Ethernet interface IC that integrates a 10/100 Mbps Media Access Controller and Physical Layer in a 128-pin TQFP package. It supports 32-bit, 16-bit, and 8-bit host bus configurations, provides a MII interface, and includes 8 KB of dynamically configurable transmit and receive FIFO memory for embedded Ethernet designs.

An Ethernet MAC-and-PHY controller provides the bridge between a host processor and a physical network connection. The MAC manages frame handling and CSMA/CD access, while the integrated PHY handles the physical signaling required for 10BASE-T or 100BASE-TX links. Integrating both functions into one device reduces component count and allows a host processor to connect to copper Ethernet without requiring a separate transceiver.

The LAN91C111-NC supports data rates of 10 Mbps and 100 Mbps and implements the MAC and PHY portions of the CSMA/CD protocol. Its host interface can operate with 32-bit, 16-bit, or 8-bit data widths, helping the device accommodate processors with different bus capabilities. The internal MII connection between the MAC and PHY helps maintain throughput without using a separate external PHY bus.

Internal transmit and receive FIFO memory is dynamically configurable and totals 8 KB. This buffering allows the host interface and Ethernet network activity to proceed at different effective rates, improving tolerance of host-bus access intervals. The MII interface also provides a standardized connection for additional physical-layer equipment and simplifies integration with related network-interface circuitry.

Typical uses include industrial embedded systems, factory automation equipment, building controls, test equipment, print controllers, and compact embedded servers. A 100 Mbps link provides sufficient bandwidth for supervisory data, configuration traffic, telemetry, and moderate local file transfer. The selectable host-bus width is especially useful when adapting the controller to legacy parallel processor buses.

The principal design task is matching the host-bus timing, interrupt structure, address mapping, and I/O voltage to the system processor. Place the device and its required external network components close together, route MII and host signals as controlled-impedance traces, and terminate unused inputs according to the manufacturer datasheet. Validate signal integrity and recovery behavior across the full set of line-rate and environmental conditions.

This product record combines the Ethernet function description, package details, sourcing guidance, practical PCB considerations, and application-specific engineering context. It also distinguishes the device from true pin-compatible alternatives by applying a strict same-package and pin-compatibility requirement rather than presenting merely similar Ethernet controllers.

Bộ thay thế dễ dàng lắp đặt cho LAN91C111-NC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

LAN91C111I-NU

✅ Drop-In
📦 128-lead TQFP (14 mm x 14 mm)
Same 10/100 Ethernet MAC and PHY family and 128-lead TQFP footprint; ordering and environmental-code differences require confirmation

📋 Tham chiếu thay thế (không có trong danh mục)

LAN91C111-NC Thông số kỹ thuật

Product Type 10/100 Non-PCI Ethernet MAC and PHY Controller
Supported Data Rates 10 Mbps and 100 Mbps
Host Interface Widths 32-bit, 16-bit, and 8-bit
Internal Interface MII
Protocol Support CSMA/CD
Ethernet Standard IEEE 802.3
Physical Layer Modes 10BASE-T and 100BASE-TX
Internal FIFO Memory 8 KB
FIFO Configuration Dynamically configurable transmit and receive
Supply Voltage Range 2.97 V to 3.63 V
Hộp 128-pin TQFP, 14 mm x 14 mm
Kiểu lắp đặt Surface mount
Device Classification Mixed-signal analog/digital semiconductor

Hướng dẫn cấu hình chân LAN91C111-NC 128-pin tqfp, 14 mm x 14 mm

Cấu hình chân cho LAN91C111-NC (128-pin tqfp, 14 mm x 14 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 128-pin tqfp, 14 mm x 14 mm cho LAN91C111-NC

Không có dữ liệu chân cụ thể sẵn có cho LAN91C111-NC.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

LAN91C111-NC phù hợp cho 6 Áp dụngs: Industrial Automation Controllers, Factory Monitoring Equipment, Building Control Systems, Embedded Test Instruments, Print and Network Peripherals, IoT Edge Gateways.

🏭

Industrial Automation Controllers

The LAN91C111-NC fits industrial automation controllers that must exchange commands, diagnostics, and sensor data over a 10/100 Mbps Ethernet link. Its integrated MAC and PHY reduce board area, while the selectable 8-bit, 16-bit, or 32-bit host interface can match the embedded processor bus. The internal 8 KB transmit and receive FIFO buffers help isolate Ethernet traffic from irregular processor access intervals. For industrial equipment, keep the Ethernet magnetics and controller layout away from high-current switching paths, and validate recovery across cable insertion, link interruption, and sustained traffic conditions.

🔧

Factory Monitoring Equipment

The LAN91C111-NC is suitable for monitoring equipment that reports measurements, alarms, and configuration data through an embedded Ethernet network. A 100 Mbps connection provides sufficient bandwidth for supervisory traffic without requiring a high-performance host processor. The device's non-PCI architecture permits use with microcontrollers and DSPs that expose a parallel host bus. Designers should confirm host-bus timing and interrupt latency in the system clock domain, and should test packet-buffer behavior when the network is continuously loaded while supervisory software periodically stalls its bus.

🔧

Building Control Systems

The LAN91C111-NC can support Ethernet-enabled building controllers for HVAC, access, lighting, and energy-management equipment. Its 10/100 Mbps capability is appropriate for supervisory command traffic, diagnostics, and configuration updates. The selectable host width allows integration with legacy 8-bit and 16-bit embedded controllers, while the integrated PHY reduces the external Ethernet interface footprint. In building installations, follow isolation and grounding recommendations for the network magnetics, provide controlled network-port routing, and verify reboot, link-flap, and offline behavior in the controller firmware.

🔧

Embedded Test Instruments

The LAN91C111-NC is appropriate for embedded test and measurement products that must upload results or accept remote-control commands through Ethernet. Its selectable host-bus width supports processor architectures with different parallel interfaces, and the 8 KB FIFO provides useful separation between frame processing and host transactions. The 100 Mbps mode supports moderate result transfers while 10 Mbps mode can serve management-only networks. For reliable laboratory operation, use the MII and host-bus timing information in the manufacturer datasheet, isolate the Ethernet section from analog or high-energy circuitry, and test sustained transfers rather than only short packet bursts.

🔧

Print and Network Peripherals

The LAN91C111-NC suits print controllers, compact network appliances, and legacy embedded peripherals that need an economical 10/100 Mbps Ethernet path. The device combines the MAC, PHY, MII connection, and FIFO in one package, reducing the number of components compared with a separated design. A narrow 8-bit or 16-bit host bus can connect to a resource-constrained controller while the FIFO absorbs short host-access stalls. Engineers should check DMA or interrupt handling, buffer ownership, and recovery from underrun conditions, and should avoid assuming that every newer controller supports the same register map.

🔧

IoT Edge Gateways

The LAN91C111-NC can serve as the wired Ethernet interface in an IoT edge gateway that collects local sensor data and forwards status or configuration information. Its integrated 10/100 MAC and PHY support copper Ethernet links in panels and cabinets where wireless access is impractical. The choice of an 8-bit, 16-bit, or 32-bit host bus allows the gateway's existing processor to be reused. For deployment, account for the controller's 2.97 V to 3.63 V supply range, validate electrostatic-discharge protection at the network connector, and design firmware to reconnect logically after link loss or system resume.

What is the LAN91C111-NC?
The LAN91C111-NC is a mixed-signal 10/100 Ethernet controller that combines a Media Access Controller, Physical Layer, and 8 KB of dynamically configurable FIFO memory. According to the Microchip Technology manufacturer datasheet, it implements the MAC and PHY portions of CSMA/CD and supports 32-bit, 16-bit, or 8-bit host interfaces for embedded processor connectivity.
What Ethernet speeds does the LAN91C111-NC support?
The LAN91C111-NC supports 10 Mbps and 100 Mbps Ethernet operation. The manufacturer datasheet identifies the device as a 10/100 Non-PCI Ethernet controller implementing the MAC and PHY portions of CSMA/CD. Its physical-layer capabilities cover 10BASE-T and 100BASE-TX connections, making it suitable for embedded supervisory, control, and data-transfer networks.
Where can I download the LAN91C111 datasheet PDF?
The official LAN91C111 datasheet PDF is available from Microchip Technology at https://ww1.microchip.com/downloads/en/DeviceDoc/00002276A.pdf. The document contains the electrical characteristics, register descriptions, host-bus details, MII information, FIFO characteristics, package data, and application guidance for the LAN91C111 family.
Where can I find the LAN91C111-NC pinout?
The LAN91C111-NC pin assignments are documented in the pin-description section and package diagrams of the official Microchip Technology LAN91C111 datasheet. The component uses a 128-pin TQFP package, so the PCB footprint and symbol should be cross-checked against the datasheet pin table before layout release rather than inferred from a generic Ethernet-controller symbol.
What host interfaces does the LAN91C111-NC provide?
The LAN91C111-NC provides selectable 32-bit, 16-bit, and 8-bit host-bus widths. According to the Microchip Technology product page, these flexible widths minimize throughput constraints when connecting the controller to processors with different parallel-bus capabilities. The host interface also supports the internal 8 KB transmit and receive FIFO arrangement.
Does the LAN91C111-NC include both MAC and PHY?
Yes. The LAN91C111-NC integrates both the Ethernet Media Access Controller and Physical Layer on one mixed-signal device. The manufacturer datasheet states that an internal MII connects the MAC and PHY data path, providing a 10/100 Mbps Ethernet solution without requiring a separate PHY for the supported copper-network interfaces.
What is the purpose of the 8 KB FIFO in the LAN91C111-NC?
The 8 KB internal FIFO provides dynamically configurable transmit and receive buffering between Ethernet activity and the parallel host bus. According to the SMSC LAN91C111 application note, the controller integrates 8 KB of dynamically configurable TX/RX FIFO SRAM, helping isolate temporary host-bus access delays from real-time Ethernet frame handling.
Is the LAN91C111-NC suitable for industrial embedded systems?
The LAN91C111-NC is suitable for industrial embedded Ethernet designs that require 10/100 Mbps connectivity and a selectable parallel host interface. Its integrated MAC, PHY, MII connection, and FIFO reduce external component count, while the 8-bit or 16-bit host modes accommodate systems whose processors do not require a 32-bit data path.
What is the difference between LAN91C111-NC and the LAN91C111 base device?
The LAN91C111-NC identifies the orderable 128-pin TQFP configuration of the LAN91C111 family. The manufacturer product page describes the family-level Ethernet functions, while the -NC ordering suffix identifies the specific package variant. Exact electrical and temperature limits for each suffix must be checked in the ordering table and package information in the manufacturer datasheet.
Can the LAN91C111-NC replace a generic 10/100 Ethernet controller?
Only after a complete interface and pin-compatibility review. A generic 10/100 controller may use a different host bus, register map, interrupt structure, voltage, clock arrangement, or package. The LAN91C111-NC is a direct PCB replacement only when the alternative has the same 128-pin TQFP footprint and every power, signal, timing, and software-compatible function matches.
When should I choose the LAN91C111-NC over a newer Ethernet controller?
Choose the LAN91C111-NC when an existing embedded design specifically supports its 32-bit, 16-bit, or 8-bit parallel host bus and requires an integrated 10/100 Mbps MAC and PHY. A newer controller is preferable when a common high-speed interface, modern processor integration, updated software support, or a different package is available and the PCB can be redesigned.
What is the best drop-in replacement for LAN91C111-NC?
A drop-in replacement must use the same 128-pin TQFP footprint and preserve the host-bus, MII, power, interrupt, clock, and register-level behavior. No verified, pin-compatible replacement is established for this product record, so do not treat a similar Ethernet MAC or a different suffix as a drop-in part without manufacturer documentation and a complete pin-by-pin review.
Is the LAN91C111-NC in stock and what is its lead time?
Current stock, minimum order quantity, and production lead time for LAN91C111-NC should be confirmed through the Request a Quote form on this page. Because availability can change with manufacturing status and order volume, request the exact suffix, package, quantity, and target date rather than relying on an undated inventory statement.
Where can I buy LAN91C111-NC and what does it cost?
Use the Request a Quote form on this page to request LAN91C111-NC pricing, stock confirmation, minimum order quantity, and delivery timing. The submitted part should identify the exact LAN91C111-NC suffix and 128-pin TQFP package so that the quotation matches the intended production configuration.
What are the key specifications of LAN91C111-NC that engineers should know?
The key specifications are integrated 10/100 Mbps Ethernet MAC and PHY operation, 32-bit, 16-bit, and 8-bit host-interface widths, MII connectivity, 8 KB of dynamically configurable FIFO memory, and a 2.97 V to 3.63 V supply range. These features follow the Microchip Technology manufacturer datasheet and product-page description for the LAN91C111 family.

Dữ liệu tham khảo kỹ thuật cho LAN91C111-NC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the LAN91C111-NC for an embedded product that already depends on a non-PCI parallel host bus and needs integrated 10/100 Mbps Ethernet. Its strongest fit is an industrial controller, building-control product, test instrument, or legacy peripheral using an 8-bit, 16-bit, or 32-bit processor interface. The integrated PHY, internal MII, and 8 KB FIFO can simplify the physical network section while supporting sustained 10 Mbps or 100 Mbps traffic. Do not select it for a new design that prefers USB, SPI, RGMII, or another modern interface, because PCB and firmware changes would negate the benefit of the legacy architecture. Before ordering a substitute, require exact package, pin, voltage, clock, interrupt, and register compatibility. No verified drop-in alternative is identified in the cross-reference results, so a similarly described Ethernet controller should be treated as a redesign candidate rather than an automatic replacement.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Brand Microchip Technology
Package 128-pin TQFP, 14 mm x 14 mm
Product Function Integrated 10/100 Ethernet MAC and PHY
Supported Data Rates 10 Mbps and 100 Mbps
Host Interface Width 32-bit, 16-bit, and 8-bit
Internal FIFO Memory 8 KB dynamically configurable TX/RX
Supply Voltage Range 2.97 V to 3.63 V
MAC-to-PHY Interface Internal MII
Protocol IEEE 802.3 CSMA/CD

Bảo phân biệt quan trọng

  • Integrated Ethernet MAC and PHY (vsGeneric 10/100 Ethernet controller)
  • Flexible parallel host interface (vsFixed-width non-PCI Ethernet controller)
  • Integrated frame buffering (vsEthernet controller requiring external frame-buffer interface)
  • Legacy embedded connectivity (vsModern controller requiring a serial device interface)

Ghi chú thiết kế

Use the manufacturer package drawing to establish the 128-pin TQFP land pattern and confirm the 14 mm by 14 mm body dimensions. Place the LAN91C111-NC according to the reference-layout guidance in the manufacturer datasheet, with the Ethernet magnetics and associated passive components positioned to minimize differential-pair discontinuity. Verify courtyard clearance, solder-mask geometry, and paste volume during PCB-library review rather than relying on a generic 128-pin symbol.

Treat the MII and parallel host-bus signals as timing-sensitive interfaces. Use the pin-description and timing tables in the manufacturer datasheet to assign address, control, interrupt, and data signals, then constrain clock and synchronous interface paths according to the implemented host bus width. Leave unused inputs in their defined states and avoid long stubs. Validate the interface at the intended host-clock and 100 Mbps operating conditions with an eye-diagram or protocol-focused test.

Do not substitute an Ethernet controller solely because both devices advertise 10/100 Mbps operation. A safe replacement must match the 128-pin TQFP footprint, host-bus width and timing, FIFO behavior, MII signals, interrupts, reset requirements, supply voltage, and register compatibility. Review each package pin and the software driver before release, and preserve the original controller's initialization sequence unless Microchip Technology explicitly documents a change.

Design the 2.97 V to 3.63 V core supply and any required I/O rails independently, following the recommended capacitor values and sequencing shown in the manufacturer datasheet. Place bulk and high-frequency decoupling capacitors close to their assigned supply pins, and verify startup, current-limit, and power-state behavior with the actual processor and network magnetics. Treat the internal 8 KB FIFO as data storage rather than a substitute for adequate supply decoupling.

Exercise firmware recovery paths before production release. Test link-down and link-up events, repeated PHY resets, malformed frames, oversized frames, FIFO pressure, and simultaneous host transmit and receive activity. Confirm that interrupt handlers clear all relevant status bits and that the driver does not overrun its buffer. These checks are particularly important when the controller was originally designed around a narrow 8-bit or 16-bit host bus.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Compliance declarations for the exact LAN91C111-NC orderable suffix are not stated in the manufacturer product-page text or the retrieved listings.

Dữ liệu được xác minh vào: 2026-11-09 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

lan91c111 datasheet lan91c111 nu datasheet lan91c111 ns datasheet smsc lan91c111 LAN91C111-NC datasheet LAN91C111-NC pinout LAN91C111-NC 128 TQFP LAN91C111-NC MII interface LAN91C111-NC 10/100 Ethernet LAN91C111-NC drop-in replacement LAN91C111-NC equivalent LAN91C111-NC price LAN91C111-NC stock Microchip LAN91C111-NC LAN91C111-NC industrial Ethernet

Các bộ phận và thuật ngữ liên quan

Microchip Technology SMSC LAN91C111-NC LAN91C111 Ethernet controller Media Access Controller MAC Physical Layer PHY Fast Ethernet 10/100 Ethernet CSMA/CD IEEE 802.3 MII Non-PCI interface parallel host bus 32-bit host bus 16-bit host bus 8-bit host bus transmit FIFO receive FIFO 10BASE-T 100BASE-TX 128-pin TQFP TQFP package family
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ