LC4064B-75T48C - 64-Macro, 7.5 ns CPLD | Lattice Semiconductor
MPN: LC4064B-75T48C ✓ Hoạt độngLC4064B-75T48C Tóm tắt
A complex programmable logic device, or CPLD, is a user-programmable semiconductor placed in the hierarchy between simple programmable logic devices and larger FPGAs. Its internal macro cells are organized into programmable logic blocks connected through a fixed interconnect structure. This architecture is useful when a design needs combinatorial and sequential logic, flexible pin assignment, and in-system reconfiguration without the resource cost of a much larger FPGA.
The LC4064B-75T48C is identified by three principal ordering characteristics: 64 macro cells, a 7.5 ns device speed designation, and a 48-pin TQFP package. The 7.5 ns designation represents the device’s speed class within the LC4064B family and should be considered alongside the complete timing specifications when designing synchronous interfaces. The TQFP package provides a surface-mount format suitable for compact PCB assemblies and automated production.
The Super Fast High Density PLD architecture is intended for glue-logic, control, decoding, interface adaptation, and embedded control applications. Its fixed internal interconnect can provide predictable routing for registered state machines, address decoding, bus control, and peripheral bridging. Because programming is nonvolatile and in-system programmable, the same PCB can support configuration changes without replacing the component.
Typical uses include industrial control logic, data-acquisition systems, communication-interface conditioning, legacy peripheral emulation, and compact embedded-control boards. The 48-pin package is particularly useful when a design needs moderate I/O capacity and a conventional fine-pitch surface-mount footprint without moving to a larger ball-grid-array package. Existing LC4064 architectures can also be migrated among compatible speed grades after timing, power, and temperature requirements are checked.
A primary design consideration is timing closure. Engineers should use the manufacturer’s device data and pin-description tables to establish clock, setup, hold, and propagation limits rather than treating the 7.5 ns ordering code as a complete timing specification. PCB layout should preserve short clock paths, provide clean return paths for supply and ground, and route sensitive signals away from noisy switching nodes.
This product record combines the exact ordering information, package identity, family descriptions, sourcing references, and cross-reference findings for LC4064B-75T48C. It also identifies device-family alternatives and separates confirmed replacement candidates from variants that require design-specific validation.
Bộ thay thế dễ dàng lắp đặt cho LC4064B-75T48C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LC4064B-75T48C (cùng hình factor và footprint) — khác nhau ở Device Type, Global Clock Pins, Logic Family.
LC4064C-75T48C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LC4064B-5T48C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LC4064B-25T48C
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LC4064B-75TN48C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LC4064B-75T100C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LC4064B-75T48C Tỷ lệ tối đa & tính chất điện
| Device Type | Complex Programmable Logic Device (CPLD) |
| Logic Family | Super Fast High Density PLD |
| Macro Cell Count | 64 macro cells |
| Speed Designation | 7.5 ns |
| Hộp | 48-pin TQFP |
| Kiểu lắp đặt | Surface mount |
| Programmability | In-system programmable |
| Số lượng chân | 48 pins |
| Logic Density | 64 macro cells |
Hướng dẫn cấu hình chân LC4064B-75T48C 48-pin tqfp
Cấu hình chân cho LC4064B-75T48C (48-pin tqfp gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho LC4064B-75T48C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LC4064B-75T48C phù hợp cho 6 Áp dụngs: Industrial Control Logic, Interface Adaptation, Data Acquisition Conditioning, Communication Control, Embedded System Sequencing, Legacy Peripheral Emulation.
Industrial Control Logic
The LC4064B-75T48C fits compact industrial control boards that require programmable state-machine, sequencing, and decoding logic without a large FPGA. Its 64 macro cells provide a dedicated logic resource in a 48-pin TQFP package, while the 7.5 ns speed designation identifies a fast LC4064B timing class suitable for clocked control paths. Place the CPLD between sensors, actuators, and a host controller to normalize signals and coordinate deterministic operations. Validate the exact voltage, temperature, and qualification limits for the target application, and use the manufacturer pin table to separate configuration, clock, and I/O routing.
Được đề xuất
Interface Adaptation
The LC4064B-75T48C is useful for adapting legacy or mixed bus signals into a common format for a processor or peripheral. Its 64 macro cells can implement decoding, level-shaping logic, request arbitration, and registered data paths, while the 48-pin TQFP package keeps the implementation compact. The 7.5 ns designation supports designs requiring deterministic logic at the selected operating conditions. Engineers should establish every timing path against the manufacturer characterization tables, reserve configuration pins correctly, and avoid routing high-current switching outputs or inductors directly beneath sensitive logic nets.
Được đề xuất
Data Acquisition Conditioning
The LC4064B-75T48C can consolidate acquisition-control logic that coordinates sample commands, channel selection, status flags, and data capture around an analog or mixed-signal front end. The 64-macro-cell density is appropriate for fixed control structures and moderate registered logic, and the 48-pin TQFP footprint preserves routing flexibility on compact instrumentation boards. Its 7.5 ns speed designation provides margin for many synchronous control paths, although actual clock rate and setup timing must be checked under the intended voltage and temperature. Keep analog and digital return currents separated and use controlled grounding near the converter and measurement circuitry.
Được đề xuất
Communication Control
For communication equipment, the LC4064B-75T48C can implement framing control, command decoding, buffer management, and programmable I/O handling around a communications controller. Its 64 macro cells and 7.5 ns speed designation make it appropriate for moderate-speed logic rather than high-throughput serial datapaths that require dedicated fabric or hard DSP resources. Use the 48-pin TQFP version to keep the design compact, and assign pins according to the device architecture and package drawing. Validate clock-domain relationships, I/O timing, and configuration behavior rather than assuming that another LC4064 grade has identical edge characteristics.
Được đề xuất
Embedded System Sequencing
The LC4064B-75T48C is appropriate for power-up sequencing, reset coordination, peripheral-enable timing, and arbitration logic in embedded systems. Its 64 macro cells allow several related state machines to share one programmable device, while the 48-pin TQFP package supports compact fanout to processors and transceivers. The 7.5 ns speed class can support fast control sequences, but timing closure remains dependent on the exact I/O standard, supply, and temperature. Maintain deterministic clock routing, provide clean decoupling at supply pins, and test every configuration state in the final power-up and reset sequence.
Được đề xuất
Legacy Peripheral Emulation
The LC4064B-75T48C can reproduce and adapt control functions associated with older programmable-logic peripherals when a board requires a configurable, nonvolatile implementation. The 64 macro cells provide useful density for address decoding, register emulation, and command sequencing in a 48-pin TQFP package. Its 7.5 ns designation identifies the target's fast timing class, allowing it to remain suitable for many synchronous control paths. Before replacing a dedicated IC, verify signal polarity, drive strength, setup and hold timing, output behavior, and programming compatibility rather than relying only on package similarity.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LC4064B-75T48C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LC4064C-75T48C | LC4064B-5T48C | LC4064B-25T48C | LC4064B-75TN48C | LC4064B-75T100C |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP | 48-pin TQFP |
| Device Type | CPLD | CPLD | CPLD | CPLD | CPLD | CPLD |
| Logic Family | Super Fast High Density PLD | Super Fast High Density PLD | ispMACH 4000B | Super Fast High Density PLD | Super Fast High Density PLD | Super Fast High Density PLD |
| Speed Designation | 7.5 ns | 7.5 ns | 227 MHz listed performance | 25 ns | 7.5 ns | 7.5 ns |
| Number of Pins | 48 pins | 48 pins | 48 pins | 48 pins | 48 pins | 48 pins |
Bảo phân biệt quan trọng
- Documented same-speed, same-package substitute candidate (vsLC4064C-75T48C)
- Target ordering class is directly identified at 7.5 ns (vsLC4064B-25T48C)
- Faster related timing class for designs requiring additional margin (vsLC4064B-5T48C)
Ghi chú thiết kế
Treat the 48-pin TQFP footprint as a constrained routing problem. Assign the clock to a pin that can be driven from a short, direct source path, keep configuration pins away from noisy adjacent nets, and follow the manufacturer land pattern for pad dimensions and copper spacing. A footprint library entry alone does not confirm that every LC4064 suffix has identical pin functions, so cross-check the ordering guide and pin-description table before release.
Use the manufacturer's recommended decoupling network and connect it directly to the device supply and ground pins. Place the high-frequency capacitor at the closest supply entry point and provide a lower-frequency bulk capacitor near the power branch. Ground-return current should remain beneath the device rather than detouring through noisy output or interface sections of the PCB.
Do not substitute an LC4064B, LC4064C, or LC4064ZC ordering code solely because the package dimensions match. Confirm pin functions, I/O standards, supply voltage, configuration method, speed grade, and timing tables for the exact replacement. LC4064ZC-75T48C is specifically identified as a 1.8 V, 32-I/O device, making it unsuitable as a direct substitute without a complete design review.
Route clock and asynchronous control paths away from switching nodes, relay contacts, and high-current output edges. If a CPLD output drives a long cable or latch, add the appropriate series damping or isolation stage rather than relying on package drive strength. Validate setup and hold behavior at the receiving device because the 7.5 ns ordering descriptor does not describe all board-level timing effects.
Thông tin tuân thủ
The accessible manufacturer and distributor listings do not expose complete exact-MPN compliance declarations. Qualification and environmental requirements must be confirmed using the manufacturer’s product documentation and ordering information.