LC4064V-75T44C - 64-Macro Cell 3.3V CPLD | Lattice
MPN: LC4064V-75T44C ✓ Hoạt độngLC4064V-75T44C Tóm tắt
A CPLD is a programmable logic device organized around macro cells and a programmable interconnect. Compared with a mask-programmed logic implementation, a CPLD allows a design to be revised by replacing its configuration data rather than manufacturing a new ASIC. Within the broader hierarchy, the LC4064V-75T44C is a complex programmable logic device, which is a semiconductor within the programmable-logic-device family. It is distinct from microcontrollers because its logic behavior is primarily established through a user configuration rather than software execution.
The 64-macro-cell architecture supports consolidation of multiple fixed-function gates, counters, state machines, address decoding, and interface control into one programmable device. Its 30 I/O, 3.3 V operating supply, and 44-pin TQFP package are useful for compact control boards, industrial automation equipment, test systems, and legacy peripheral expansion. The -75 designation identifies a 7.5 ns speed grade in the manufacturer naming system, while the 44 suffix identifies the 44-pin package option.
The ispMACH 4000 architecture combines the characteristics of Lattice ispLSI 2000 and ispMACH 4A devices. Family documentation states that devices of different densities in the same package retain the same pinout, enabling migration within the family. This architectural consistency supports design reuse, although firmware, timing constraints, and device-specific functions still require validation before changing density or grade.
Typical uses include bus-interface control, data capture and formatting, industrial sequence control, instrumentation, test-equipment glue logic, and general-purpose peripheral interfacing. In these applications, the device can consolidate logic that would otherwise require multiple GAL, PAL, or small CPLD parts. Nonvolatile in-system programming also supports production configuration, field updates, and maintenance without removing the device from its circuit.
Designers should use the manufacturer pin table and device-programmer instructions when assigning package pins and creating a board footprint. The 44-pin TQFP package requires adequate lead clearance, careful solder-paste control, and inspection of fine-pitch leads. Power rails should be decoupled close to the device, while unused inputs should be tied to a defined logic level. Configuration pins and programming-interface connections should follow the recommended schematic and termination guidance.
This product page combines the device identity, package information, documented electrical characteristics, source links, engineering application guidance, and a cautious drop-in comparison. It is designed to help engineers assess LC4064V-75T44C suitability while preserving the distinction between a verified footprint match and a replacement that still requires configuration, timing, and lifecycle review.
Bộ thay thế dễ dàng lắp đặt cho LC4064V-75T44C — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LC4064V-75T44C (cùng hình factor và footprint) — khác nhau ở Architecture, Configuration Memory, Product Family, Speed Grade, Supported Supply Voltages.
LC4064V-75T44I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LC4064V-75T44E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LC4064V-75TN44C
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LC4064V-75T44C Tỷ lệ tối đa & tính chất điện
| Product Type | Complex programmable logic device (CPLD) |
| Product Family | ispMACH 4000 |
| Macro Cell Count | 64 macro cells |
| User I/O Count | 30 I/O |
| Primary Supply Voltage | 3.3 V |
| Supported Supply Voltages | 1.8 V, 2.5 V, and 3.3 V |
| Device Speed Grade | 7.5 ns |
| Maximum Frequency | 168 MHz |
| Programming Type | In-system programmable |
| Configuration Memory | Nonvolatile |
| Package Type | 44-pin TQFP |
| Package Family | TQFP surface-mount package |
| Kiểu lắp đặt | Surface mount |
| Shipping Format | Tray |
Hướng dẫn cấu hình chân LC4064V-75T44C tqfp surface-mount package
Cấu hình chân cho LC4064V-75T44C (tqfp surface-mount package gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho LC4064V-75T44C.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LC4064V-75T44C phù hợp cho 6 Áp dụngs: Industrial Control and Sequencing, Legacy Bus Interface Consolidation, Test and Measurement Equipment, Communication and Network Adapter Logic, Audio and Video Interface Control, Programmable Peripheral and Glue Logic.
Industrial Control and Sequencing
The LC4064V-75T44C is suitable for consolidating machine-control sequencing, state-machine logic, interlocks, and discrete I/O handling in industrial equipment. Its 64 macro cells provide capacity for multiple control paths, while 30 user I/O allows the CPLD to bridge field signals and a controller. The 7.5 ns speed grade supports timing-sensitive control logic, and nonvolatile in-system programming permits controlled firmware or logic updates in deployed systems. Engineers should select the temperature grade that covers the machine enclosure, use the manufacturer pin table for isolated or non-isolated I/O assignments, and validate all timing against the worst-case system clock and I/O loading.
Được đề xuất
Legacy Bus Interface Consolidation
The LC4064V-75T44C can consolidate address decoding, bus arbitration, data-width conversion, interrupt handling, and peripheral-select logic around a legacy processor bus. Sixty-four macro cells offer more capacity than small PAL or GAL devices, while the 30-I/O count is useful for multiple chip selects and handshake signals. At a 7.5 ns device grade, the device is useful for registered interface logic where deterministic combinational and sequential behavior matters. The implementation should use registered outputs where required, respect setup and hold constraints in the device timing documentation, and keep high-current or high-voltage bus drivers outside the CPLD.
Được đề xuất
Test and Measurement Equipment
The LC4064V-75T44C fits instrumentation front ends that require coordinated control of data capture, mode selection, trigger routing, and status decoding. Its 64 macro cells allow several measurement channels to share programmable sequencing logic, while the 7.5 ns grade supports short decision paths in acquisition systems. Nonvolatile configuration makes it practical to store distinct instrument configurations and update them without changing the PCB. For high-impedance analog measurement nodes, use external buffers and protection rather than driving sensitive signals directly from the CPLD. Verify acquisition timing against the instrument's worst-case clock and ensure the selected qualification grade matches the operating environment.
Được đề xuất
Communication and Network Adapter Logic
The LC4064V-75T44C can implement protocol framing, command parsing, FIFO control, interrupt routing, and status multiplexing in compact communication adapters. Thirty I/O support parallel datapaths and control signals, while the 64-macro-cell count is sufficient for moderate protocol translation between a host processor and a physical interface. The 168 MHz maximum-frequency listing and 7.5 ns device grade should not be treated as equivalent to every internal path constraint; engineers must use the device timing report for the selected clock domain. Keep high-speed physical-layer signaling on dedicated transceiver circuitry and use the CPLD for protocol-adjacent logic.
Được đề xuất
Audio and Video Interface Control
The LC4064V-75T44C is appropriate for auxiliary control logic surrounding audio codecs, display interfaces, and digital media systems. It can implement sample-rate sequencing, mute and routing control, format conversion, status decoding, and interrupt coordination while leaving data paths to dedicated converters. The 30-I/O count supports multiple control buses and the 64 macro cells allow several control blocks to be consolidated. Signal integrity remains a system-level concern: route clocks and data according to the source and sink requirements, add series damping where needed, and avoid using general-purpose CPLD outputs as substitutes for properly terminated differential or high-speed interfaces.
Được đề xuất
Programmable Peripheral and Glue Logic
The LC4064V-75T44C provides a practical consolidation point for address decode, interrupt steering, power sequencing, watchdog handling, and peripheral chip selects in embedded systems. Its nonvolatile in-system-programmable architecture permits board-level logic to remain adaptable after the surrounding processor design is frozen. The 44-pin TQFP footprint supports compact multilayer PCB construction, although fine-pitch assembly still requires controlled stencil and reflow processes. Use the manufacturer configuration instructions to determine the required JTAG or programming connections, pull states, and power conditions. Firmware and hardware should be tested together because configuration updates may alter reset, interrupt, or bus timing behavior.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LC4064V-75T44C — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LC4064V-75T44I | LC4064V-75T44E | LC4064V-75TN44C |
|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 44-pin TQFP | 44-pin TQFP | 44-pin TQFP | 44-pin TQFP |
| Device Type | ispMACH 4000 CPLD | ispMACH 4000 CPLD | ispMACH 4000 CPLD | ispMACH 4000 CPLD |
| Macro Cells | 64 macro cells | 64 macro cells | 64 macro cells | 64 macro cells |
| User I/O | 30 I/O | 30 I/O | 30 I/O | 30 I/O |
| Primary Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Device Speed Grade | 7.5 ns | 7.5 ns | 7.5 ns | 7.5 ns |
| Programming | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
| Temperature-Grade Suffix | C | I | E | N plus C catalog suffix |
Bảo phân biệt quan trọng
- Same-package drop-in candidates retain the 7.5 ns speed grade (vsLC4064V-75T44I)
- 64 macro cells and 30 I/O provide a larger consolidation target than small PAL or GAL devices (vsGAL16V8B-25LP)
- Same-package qualification choices support different environmental requirements (vsLC4064V-75T44E)
- The ispMACH 4000 family is designed for in-system programming and density migration (vsATF22LV10C-10SU)
Ghi chú thiết kế
Use the manufacturer TQFP-44 land pattern and pin-1 orientation when creating the PCB footprint. Fine-pitch leads require accurate solder-paste volume, adequate solder-mask dams, and controlled reflow; excessive paste can cause bridging between adjacent 0.5 mm leads. Keep configuration and clock routing away from sensitive analog inputs, provide a solid ground plane, and avoid placing test points that can interfere with in-system programming access.
Decouple each applicable supply connection with local high-frequency and bulk capacitance, placing the smallest capacitor closest to the device pins. Use the manufacturer power-pin table to determine whether the 44-pin package exposes separate core and I/O supplies and whether their sequencing rules apply. Do not combine the listed 1.8 V, 2.5 V, and 3.3 V options as interchangeable without reviewing the exact electrical-characteristics table for the selected device.
Do not infer pin compatibility from the 44-pin package alone. Verify pin names, dedicated configuration pins, power pins, clock inputs, and user I/O assignments in the manufacturer pin table. When changing between C, E, or I temperature suffixes, confirm the complete operating-temperature limits, qualification requirements, and programming-file compatibility. A footprint match does not guarantee that every device-specific or environmental requirement is satisfied.
The 7.5 ns speed designation requires clock and I/O paths to be evaluated against the actual timing report rather than treated as a universal operating frequency. Use registered logic for demanding interfaces, constrain all timing in the design tool, and preserve controlled-impedance routing for external clock or data connections. Isolate the CPLD from high-current switching nodes so its ground reference does not share large return-current paths with inductive loads.
Thông tin tuân thủ
The available product and family results do not state the target's RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose commercial CPLD unless a separately qualified automotive ordering option is identified by the manufacturer.