LC4064V-75T44C - 64-Macro Cell 3.3V CPLD | Lattice
MPN: LC4064V-75T44C ✓ 啟用中LC4064V-75T44C 概覽
A CPLD is a programmable logic device organized around macro cells and a programmable interconnect. Compared with a mask-programmed logic implementation, a CPLD allows a design to be revised by replacing its configuration data rather than manufacturing a new ASIC. Within the broader hierarchy, the LC4064V-75T44C is a complex programmable logic device, which is a semiconductor within the programmable-logic-device family. It is distinct from microcontrollers because its logic behavior is primarily established through a user configuration rather than software execution.
The 64-macro-cell architecture supports consolidation of multiple fixed-function gates, counters, state machines, address decoding, and interface control into one programmable device. Its 30 I/O, 3.3 V operating supply, and 44-pin TQFP package are useful for compact control boards, industrial automation equipment, test systems, and legacy peripheral expansion. The -75 designation identifies a 7.5 ns speed grade in the manufacturer naming system, while the 44 suffix identifies the 44-pin package option.
The ispMACH 4000 architecture combines the characteristics of Lattice ispLSI 2000 and ispMACH 4A devices. Family documentation states that devices of different densities in the same package retain the same pinout, enabling migration within the family. This architectural consistency supports design reuse, although firmware, timing constraints, and device-specific functions still require validation before changing density or grade.
Typical uses include bus-interface control, data capture and formatting, industrial sequence control, instrumentation, test-equipment glue logic, and general-purpose peripheral interfacing. In these applications, the device can consolidate logic that would otherwise require multiple GAL, PAL, or small CPLD parts. Nonvolatile in-system programming also supports production configuration, field updates, and maintenance without removing the device from its circuit.
Designers should use the manufacturer pin table and device-programmer instructions when assigning package pins and creating a board footprint. The 44-pin TQFP package requires adequate lead clearance, careful solder-paste control, and inspection of fine-pitch leads. Power rails should be decoupled close to the device, while unused inputs should be tied to a defined logic level. Configuration pins and programming-interface connections should follow the recommended schematic and termination guidance.
This product page combines the device identity, package information, documented electrical characteristics, source links, engineering application guidance, and a cautious drop-in comparison. It is designed to help engineers assess LC4064V-75T44C suitability while preserving the distinction between a verified footprint match and a replacement that still requires configuration, timing, and lifecycle review.
直接替換替代品,適用於 LC4064V-75T44C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LC4064V-75T44C (相同外形與佔位) — 差異在於 Architecture, Configuration Memory, Product Family, Speed Grade, Supported Supply Voltages.
LC4064V-75T44I
✅ 直接替換聯絡詢價
查看資料表 →LC4064V-75T44E
✅ 直接替換聯絡詢價
查看資料表 →LC4064V-75TN44C
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064V-75T44C 最大額定值與電氣特性
| Product Type | Complex programmable logic device (CPLD) |
| Product Family | ispMACH 4000 |
| Macro Cell Count | 64 macro cells |
| User I/O Count | 30 I/O |
| Primary Supply Voltage | 3.3 V |
| Supported Supply Voltages | 1.8 V, 2.5 V, and 3.3 V |
| Device Speed Grade | 7.5 ns |
| Maximum Frequency | 168 MHz |
| Programming Type | In-system programmable |
| Configuration Memory | Nonvolatile |
| Package Type | 44-pin TQFP |
| Package Family | TQFP surface-mount package |
| 安裝類型 | Surface mount |
| Shipping Format | Tray |
LC4064V-75T44C tqfp surface-mount package 腳位配置指南
LC4064V-75T44C(tqfp surface-mount package 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LC4064V-75T44C.
請參閱 資料表 以查看完整腳位配置。
典型應用
LC4064V-75T44C 適用於 6 應用s: Industrial Control and Sequencing, Legacy Bus Interface Consolidation, Test and Measurement Equipment, Communication and Network Adapter Logic, Audio and Video Interface Control, Programmable Peripheral and Glue Logic.
Industrial Control and Sequencing
The LC4064V-75T44C is suitable for consolidating machine-control sequencing, state-machine logic, interlocks, and discrete I/O handling in industrial equipment. Its 64 macro cells provide capacity for multiple control paths, while 30 user I/O allows the CPLD to bridge field signals and a controller. The 7.5 ns speed grade supports timing-sensitive control logic, and nonvolatile in-system programming permits controlled firmware or logic updates in deployed systems. Engineers should select the temperature grade that covers the machine enclosure, use the manufacturer pin table for isolated or non-isolated I/O assignments, and validate all timing against the worst-case system clock and I/O loading.
推薦
Legacy Bus Interface Consolidation
The LC4064V-75T44C can consolidate address decoding, bus arbitration, data-width conversion, interrupt handling, and peripheral-select logic around a legacy processor bus. Sixty-four macro cells offer more capacity than small PAL or GAL devices, while the 30-I/O count is useful for multiple chip selects and handshake signals. At a 7.5 ns device grade, the device is useful for registered interface logic where deterministic combinational and sequential behavior matters. The implementation should use registered outputs where required, respect setup and hold constraints in the device timing documentation, and keep high-current or high-voltage bus drivers outside the CPLD.
推薦
Test and Measurement Equipment
The LC4064V-75T44C fits instrumentation front ends that require coordinated control of data capture, mode selection, trigger routing, and status decoding. Its 64 macro cells allow several measurement channels to share programmable sequencing logic, while the 7.5 ns grade supports short decision paths in acquisition systems. Nonvolatile configuration makes it practical to store distinct instrument configurations and update them without changing the PCB. For high-impedance analog measurement nodes, use external buffers and protection rather than driving sensitive signals directly from the CPLD. Verify acquisition timing against the instrument's worst-case clock and ensure the selected qualification grade matches the operating environment.
推薦
Communication and Network Adapter Logic
The LC4064V-75T44C can implement protocol framing, command parsing, FIFO control, interrupt routing, and status multiplexing in compact communication adapters. Thirty I/O support parallel datapaths and control signals, while the 64-macro-cell count is sufficient for moderate protocol translation between a host processor and a physical interface. The 168 MHz maximum-frequency listing and 7.5 ns device grade should not be treated as equivalent to every internal path constraint; engineers must use the device timing report for the selected clock domain. Keep high-speed physical-layer signaling on dedicated transceiver circuitry and use the CPLD for protocol-adjacent logic.
推薦
Audio and Video Interface Control
The LC4064V-75T44C is appropriate for auxiliary control logic surrounding audio codecs, display interfaces, and digital media systems. It can implement sample-rate sequencing, mute and routing control, format conversion, status decoding, and interrupt coordination while leaving data paths to dedicated converters. The 30-I/O count supports multiple control buses and the 64 macro cells allow several control blocks to be consolidated. Signal integrity remains a system-level concern: route clocks and data according to the source and sink requirements, add series damping where needed, and avoid using general-purpose CPLD outputs as substitutes for properly terminated differential or high-speed interfaces.
推薦
Programmable Peripheral and Glue Logic
The LC4064V-75T44C provides a practical consolidation point for address decode, interrupt steering, power sequencing, watchdog handling, and peripheral chip selects in embedded systems. Its nonvolatile in-system-programmable architecture permits board-level logic to remain adaptable after the surrounding processor design is frozen. The 44-pin TQFP footprint supports compact multilayer PCB construction, although fine-pitch assembly still requires controlled stencil and reflow processes. Use the manufacturer configuration instructions to determine the required JTAG or programming connections, pull states, and power conditions. Firmware and hardware should be tested together because configuration updates may alter reset, interrupt, or bus timing behavior.
推薦
推薦產品摘要
工程參考資料,適用於 LC4064V-75T44C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LC4064V-75T44I | LC4064V-75T44E | LC4064V-75TN44C |
|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 44-pin TQFP | 44-pin TQFP | 44-pin TQFP | 44-pin TQFP |
| Device Type | ispMACH 4000 CPLD | ispMACH 4000 CPLD | ispMACH 4000 CPLD | ispMACH 4000 CPLD |
| Macro Cells | 64 macro cells | 64 macro cells | 64 macro cells | 64 macro cells |
| User I/O | 30 I/O | 30 I/O | 30 I/O | 30 I/O |
| Primary Supply Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Device Speed Grade | 7.5 ns | 7.5 ns | 7.5 ns | 7.5 ns |
| Programming | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
| Temperature-Grade Suffix | C | I | E | N plus C catalog suffix |
主要差異化特點
- Same-package drop-in candidates retain the 7.5 ns speed grade (對比LC4064V-75T44I)
- 64 macro cells and 30 I/O provide a larger consolidation target than small PAL or GAL devices (對比GAL16V8B-25LP)
- Same-package qualification choices support different environmental requirements (對比LC4064V-75T44E)
- The ispMACH 4000 family is designed for in-system programming and density migration (對比ATF22LV10C-10SU)
設計說明
Use the manufacturer TQFP-44 land pattern and pin-1 orientation when creating the PCB footprint. Fine-pitch leads require accurate solder-paste volume, adequate solder-mask dams, and controlled reflow; excessive paste can cause bridging between adjacent 0.5 mm leads. Keep configuration and clock routing away from sensitive analog inputs, provide a solid ground plane, and avoid placing test points that can interfere with in-system programming access.
Decouple each applicable supply connection with local high-frequency and bulk capacitance, placing the smallest capacitor closest to the device pins. Use the manufacturer power-pin table to determine whether the 44-pin package exposes separate core and I/O supplies and whether their sequencing rules apply. Do not combine the listed 1.8 V, 2.5 V, and 3.3 V options as interchangeable without reviewing the exact electrical-characteristics table for the selected device.
Do not infer pin compatibility from the 44-pin package alone. Verify pin names, dedicated configuration pins, power pins, clock inputs, and user I/O assignments in the manufacturer pin table. When changing between C, E, or I temperature suffixes, confirm the complete operating-temperature limits, qualification requirements, and programming-file compatibility. A footprint match does not guarantee that every device-specific or environmental requirement is satisfied.
The 7.5 ns speed designation requires clock and I/O paths to be evaluated against the actual timing report rather than treated as a universal operating frequency. Use registered logic for demanding interfaces, constrain all timing in the design tool, and preserve controlled-impedance routing for external clock or data connections. Isolate the CPLD from high-current switching nodes so its ground reference does not share large return-current paths with inductive loads.
合規資訊
The available product and family results do not state the target's RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose commercial CPLD unless a separately qualified automotive ordering option is identified by the manufacturer.