Texas Instruments

LM2903N/NOPB - 36V Dual Open-Collector Comparator | TI

MPN: LM2903N/NOPB ✓ Hoạt động
36 V Vdss 8-pin PDIP (P) Package
MOQ: 1 |

LM2903N/NOPB Tóm tắt

Texas Instruments LM2903N/NOPB is a dual differential comparator with two independent channels, open-collector open-drain outputs, a 36 V maximum supply rating, and an 8-pin PDIP package. The device provides a 2 mV maximum input offset-voltage specification, 1.3 microseconds propagation delay, and an operating temperature range of -40°C to 85°C.

A comparator is a signal-conditioning semiconductor that evaluates two input voltages and produces a logic-level result indicating which input is higher. A dual differential comparator combines two independent comparison channels in one package. The LM2903 belongs to the broader comparator and amplifier IC hierarchy and is designed for single-supply operation, split-supply operation, and interfaces where an open-collector output can directly drive pull-up resistors.

The principal features include low offset voltage, low power consumption, and open-collector outputs. Open-collector outputs can sink current while remaining in a high-impedance state when inactive, allowing the output transition speed and logic level to be set by an external pull-up network. The two channels operate independently, supporting simultaneous comparison, level detection, window monitoring, or dual-threshold functions in one circuit.

The Texas Instruments LM2903-N family is specified for operation from a single supply across a wide voltage range, with an operating range extending to 36 V. The 2 mV maximum offset specification is useful when the comparator must resolve small voltage differences. Its 1.3 microsecond response is suitable for general-purpose industrial control, monitoring, and interface circuits rather than ultra-high-speed signal comparison.

Typical applications include industrial sensor interfaces, overvoltage and undervoltage detection, battery threshold monitoring, temperature-control loops, and general digital logic interfaces. The open-drain architecture also allows wired logic, alarm aggregation, and level-shifting arrangements when suitable pull-up resistors are provided.

For reliable PCB implementation, place the input and output components close to the device and provide a defined pull-up resistor on each open-collector output. Check the output sink-current limit, input common-mode range, supply decoupling, and unused-channel configuration against the manufacturer datasheet before finalizing the design.

This product page combines the exact orderable part information, package information, comparator characteristics, drop-in candidate analysis, and application-focused engineering guidance to support faster component selection and board-level implementation.

Bộ thay thế dễ dàng lắp đặt cho LM2903N/NOPB — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LM2903N/NOPB (cùng hình factor và footprint) — khác nhau ở Output Type, Package, Comparator Type, Input Offset Voltage, Operating Temperature Range.

Texas Instruments
Output Type: Open-Collector / Open-Drain
Package: 8-Pin PDIP (DIP-8, N suffix)
Comparator Type: Low Offset Voltage, Dual Differential
onsemi
Output Type: Open collector
Package: 8-pin PDIP
Input Offset Voltage: 2.0 mV maximum for the LM193/LM2903 family

LM2903N

✅ Drop-In
Texas Instruments
📦 8-DIP
Low Offset Voltage, Dual Differential · 2 (dual independent) · Open-Collector / Open-Drain · 2 V to 36 V · ±1 V to ±18 V · 2.5 mV (LM2903 grade) · 25 nA · Includes ground (negative rail)

Liên hệ để biết giá

Xem tài liệu →

LM2903N/NOPB Tỷ lệ tối đa & tính chất điện

Comparator Type Dual differential comparator
Number of Channels 2 channels
Kiểu đầu ra Open collector / open drain
Maximum Supply Voltage 36 V
Input Offset Voltage 2 mV maximum
Propagation Delay 1.3 microseconds
Khoảng nhiệt độ hoạt động -40°C to 85°C
Hộp 8-pin PDIP (P)
Số chân 8 pins
Kiểu lắp đặt Through-hole
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification unknown

Hướng dẫn cấu hình chân LM2903N/NOPB 8-pin pdip (p)

Cấu hình chân cho LM2903N/NOPB (8-pin pdip (p) gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 8-pin pdip (p) cho LM2903N/NOPB

Không có dữ liệu chân cụ thể sẵn có cho LM2903N/NOPB.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

LM2903N/NOPB phù hợp cho 6 Áp dụngs: Industrial Sensor Threshold Detection, Battery Overvoltage and Undervoltage Monitoring, Temperature-Control Loop Comparison, Digital Logic Interface and Level Detection, Motor and Solenoid Driver Interlock, Wired-Logic and Alarm Aggregation.

🏭

Industrial Sensor Threshold Detection

The LM2903N/NOPB fits industrial sensor interfaces that compare a conditioned measurement against a reference voltage. Its two independent channels can monitor two thresholds, while the stated 2 mV maximum input offset voltage supports decisions involving relatively small voltage differences. The device operates across a -40°C to 85°C range, making it appropriate for equipment exposed to moderate industrial temperature variation. Each open-collector output can directly pull a control or alarm line low, with an external pull-up setting the opposite logic state. Designers should verify that the sensor voltage remains inside the comparator's specified common-mode range and allow for output rise time when calculating alarm response time.

⚡

Battery Overvoltage and Undervoltage Monitoring

The LM2903N/NOPB can supervise a battery or DC rail by comparing its voltage against a reference in each of its two channels. The 36 V maximum supply rating provides margin for industrial battery systems while the dual architecture supports separate overvoltage and undervoltage decisions. Open-collector outputs allow fault signals to be combined or pulled up to the logic voltage used by a monitoring controller. In this implementation, resistor tolerances and reference accuracy can dominate the effective switching threshold, so the 2 mV maximum offset specification should be treated as one error contributor rather than the complete threshold budget. Confirm the input common-mode range across the full battery voltage excursion.

🌡️

Temperature-Control Loop Comparison

The LM2903N/NOPB is suitable for a basic temperature-control loop in which a sensor amplifier output is compared with a setpoint. One differential channel can determine whether the measured temperature is above or below the commanded value, while the other channel can monitor a redundant limit. Its 1.3 microsecond propagation delay is short compared with typical thermal-loop response times, allowing switching behavior to follow the sensed condition without becoming the dominant lag. The open-drain output can drive a relay-driver input, a logic gate, or an optocoupler control stage through a suitable pull-up network. Thermal stability of the external reference and feedback components remains important when the target switching point requires high accuracy.

🧩

Digital Logic Interface and Level Detection

The LM2903N/NOPB can act as a robust logic-level interface between an analog voltage domain and a digital control system. Its open-collector output provides straightforward active-low signaling: the output transistor pulls the line low when the comparison changes state, while a pull-up resistor establishes the high level. The dual-channel configuration can evaluate two unrelated signals or implement a window detector using external references. This arrangement is useful for interlock logic, digital enable signals, and simple alarm inputs. Because the output does not actively source current, the pull-up voltage must remain within the device's output ratings, and the selected resistor must satisfy both sink-current and rise-time requirements under the intended load.

⚙️

Motor and Solenoid Driver Interlock

The LM2903N/NOPB can supervise motor, solenoid, or actuator control signals by comparing a command or feedback voltage against a reference. The 36 V maximum supply rating accommodates industrial control environments, and the open-collector output can provide an active-low interlock or fault indication to a controller. Its two channels can separately validate an enable command and a feedback condition, improving system safety checks before a power stage operates. The comparator itself does not provide the motor drive current or isolation required for a power actuator; it is best used ahead of a suitable driver. Layout should keep the sensing node away from high-current switching paths to prevent ground bounce from changing the decision near the threshold.

🔧

Wired-Logic and Alarm Aggregation

The LM2903N/NOPB is well suited to open-drain alarm and fault signals because multiple comparator outputs can share a common pull-up when wired in parallel. Two channels can monitor separate fault conditions and combine them into one active-low summary line for a system controller. This arrangement reduces the number of controller inputs while retaining individual fault diagnosis elsewhere. The 1.3 microsecond propagation delay supports prompt fault recognition, although the shared pull-up creates a tradeoff between rise time, power dissipation, and the number of simultaneously asserted outputs. Check the datasheet's sink-current limit and ensure that every attached output remains off during normal operation so the common line is not unintentionally pulled low.

What is the operating voltage of LM2903N/NOPB?
The LM2903N/NOPB is rated for operation from a single supply up to 36 V and can also be used with split supplies. According to the Texas Instruments LM2903-N datasheet, the device is intended for low-power, low-offset dual-comparator applications. The exact minimum supply voltage should be confirmed in the electrical-characteristics table before selecting the operating range.
What are the key specifications of LM2903N/NOPB that engineers should know?
The LM2903N/NOPB is a two-channel differential comparator in an 8-pin PDIP package, with a 36 V maximum supply rating, 2 mV maximum input offset voltage, and 1.3 microsecond propagation delay. According to the Texas Instruments datasheet, each channel has an open-collector open-drain output. Its -40°C to 85°C operating range makes it suitable for general-purpose industrial signal-comparison circuits.
Where can I download the LM2903N datasheet PDF?
The authoritative LM2903N datasheet is available from the Texas Instruments LM2903-N product page at https://www.ti.com/product/LM2903-N. The LM2903N/NOPB orderable part is also identified on the TI product-details page. Use the manufacturer document for the final pin description, electrical limits, common-mode range, power dissipation, and recommended application circuit.
Where can I find the LM2903N pinout?
The LM2903N pinout is documented in the pin-configuration section of the Texas Instruments LM2903-N datasheet. The LM2903N/NOPB uses an 8-pin PDIP package with two differential comparator channels and open-collector outputs. Assign tracks by consulting the manufacturer pin-description table, and confirm the orientation from the pin-1 marking before soldering.
Is LM2903N/NOPB suitable for single 5V supply operation?
Yes, the LM2903N/NOPB is designed to operate from a single power supply, including low-voltage systems where the supply is close to the signal range. Its two channels can compare a sensor voltage with a reference while the input common-mode voltage remains within the specified operating region. According to the Texas Instruments datasheet, the exact allowable input range must be respected.
What can replace the LM2903N/NOPB comparator?
The onsemi LM2903N is the clearest pin-compatible candidate identified for the LM2903N/NOPB because both are 8-DIP dual open-collector comparators. According to the Texas Instruments LM2903-N family information, the LM2903 family also supports drop-in replacements with matching functionality. Always compare offset voltage, common-mode range, output current, timing, and temperature limits before substitution.
Can onsemi LM2903N replace Texas Instruments LM2903N/NOPB?
The onsemi LM2903N can be considered for a drop-in replacement because both use an 8-pin DIP format and implement dual open-collector comparator channels. However, the published comparison does not establish identical offset voltage, propagation delay, common-mode limits, or output-current ratings. Confirm those parameters in each manufacturer datasheet and review your board's pull-up network before approving the substitution.
LM2903N/NOPB vs LM393N/NOPB - which comparator should I choose?
Choose the LM2903N/NOPB when your design benefits from its stated 2 mV maximum input offset voltage, 36 V maximum supply rating, and 1.3 microsecond propagation delay. LM393N/NOPB is a related dual comparator family, but its exact limits must be checked separately. The correct decision depends on supply voltage, common-mode range, output sink current, and required switching speed.
When should I choose LM2903N/NOPB over the onsemi LM2903N?
Choose the Texas Instruments LM2903N/NOPB when its specified 36 V maximum supply rating, 2 mV maximum offset voltage, 1.3 microsecond propagation delay, -40°C to 85°C range, and PDIP footprint match your design exactly. Select the onsemi LM2903N when its separately verified electrical ratings provide a better fit or when sourcing considerations favor that manufacturer.
How is an LM2903N/NOPB open-collector output used?
Each LM2903N/NOPB open-collector output requires an external pull-up resistor to establish a high logic level. The transistor can sink current to ground when the comparator changes state, but it does not actively drive the output high. According to the Texas Instruments application information, resistor selection must satisfy both the required logic rise time and the output sink-current limit.
What is the propagation delay of LM2903N/NOPB?
The LM2903N/NOPB propagation delay is 1.3 microseconds in the published product description. According to the Texas Instruments LM2903-N documentation, this timing suits general-purpose comparison and industrial interface functions. Account for output rise time and comparator input overdrive when the application requires a guaranteed response within a short system timing window.
Where can I buy LM2903N/NOPB online?
Use the Request a Quote form on this page to request LM2903N/NOPB availability, current commercial terms, and order scheduling. The Texas Instruments product page identifies the exact PDIP orderable part, but current stock and lead time can change. Submit the requested quantity, target package, and delivery location with the inquiry for an actionable quotation.
What is the price of LM2903N/NOPB?
The Request a Quote form on this page provides the current commercial terms for LM2903N/NOPB. Commercial pricing can depend on quantity, packaging format, order volume, and market conditions, so a static price is not appropriate for procurement. Submit the required quantity and project cadence with the request for a current quotation.
Is LM2903N/NOPB in stock and what is its lead time?
Current LM2903N/NOPB stock and lead time should be confirmed through the Request a Quote form on this page. The exact PDIP orderable part is identified by Texas Instruments as LM2903N/NOPB, but component availability changes with demand and manufacturing schedules. Include your required quantity, shipment destination, and required delivery date in the request.
Is the LM2903N/NOPB lifecycle status active?
The LM2903N/NOPB remains listed as an orderable product on the Texas Instruments LM2903-N product page, supporting an active lifecycle classification. The part-details listing identifies an 8-pin PDIP configuration and a -40°C to 85°C temperature range. For production planning, obtain the current orderable status and lead time through the Request a Quote form.

Dữ liệu tham khảo kỹ thuật cho LM2903N/NOPB — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the LM2903N/NOPB when the design needs two independent open-collector comparison channels in an 8-pin PDIP package and the stated 2 mV maximum offset, 1.3 microsecond propagation delay, 36 V maximum supply rating, and -40°C to 85°C range satisfy the requirements. The onsemi LM2903N is the closest documented drop-in candidate because it also appears as an 8-DIP dual open-collector comparator, but its exact electrical limits should be checked before substitution. For designs needing a smaller footprint, rail-to-rail input operation, or faster response, a different package and pinout may offer a better fit, but those devices are not drop-in replacements for an existing PDIP layout. Always verify input common-mode range, output sink current, supply current, and the external pull-up network against the manufacturer datasheet.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này LM2903N
Brand Texas Instruments onsemi
Package 8-pin PDIP (P) 8-DIP - same footprint class
Comparator Channels 2 channels 2 channels
Output Type Open collector / open drain Open collector / open drain

Bảo phân biệt quan trọng

  • Dual independent low-offset comparison channels (vsLM2903N)
  • High-voltage open-collector operation (vsLM2903N)
  • Through-hole integration in an 8-pin PDIP (vsLM2903N)

Ghi chú thiết kế

Do not treat the open-collector output as a push-pull logic output. Fit a pull-up resistor on every comparator output so the line has a defined high voltage when the output transistor is off. Select the resistor using the required logic level, output sink-current limit, propagation delay, and allowable rise time. If two outputs are wired in parallel for fault aggregation, verify that both channels remain inactive during a normal system state.

Keep the comparator inputs, feedback divider, and reference components close to the package to minimize pickup from adjacent switching circuits. Place the input bypass capacitor at the supply pin and maintain a quiet return path for the comparator ground. High-current relay, motor, and power-converter returns should not share narrow PCB traces with the sensing reference because ground bounce can shift the decision point.

The 36 V rating is a maximum operating limit, not a recommendation to operate continuously at 36 V. Derive the actual dissipation from the supply voltage, output sinking duty cycle, and the PCB thermal environment. When an open output is high-impedance, the pull-up resistor may continue to dissipate power, so calculate both the comparator output-device loss and resistor loading before selecting the external network.

For low-level sensor comparisons, account for offset voltage, resistor tolerances, reference drift, and input noise as separate contributors to switching-point error. The specified 2 mV maximum offset is only one part of that error budget. Apply hysteresis when the comparator output must not chatter around a slow or noisy threshold, and verify that the feedback component selected for hysteresis does not exceed the output and input limits.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The exact LM2903N/NOPB orderable-part listing does not state the requested compliance classifications. The NOPB packaging suffix was not used as a substitute for an explicit compliance statement.

Dữ liệu được xác minh vào: 2026-11-17 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

lm2903n datasheet lm2903n pinout lm2903 datasheet pdf lm2903n pdf LM2903N/NOPB datasheet LM2903N/NOPB pinout Texas Instruments LM2903N/NOPB LM2903N/NOPB 36V comparator LM2903N/NOPB PDIP package LM2903N/NOPB drop-in replacement LM2903N/NOPB equivalent LM2903N/NOPB vs LM2903N LM2903N/NOPB price LM2903N/NOPB application circuit LM2903N/NOPB open collector output

Các bộ phận và thuật ngữ liên quan

Texas Instruments LM2903N/NOPB LM2903-N onsemi LM2903N LM2903M/NOPB LM393N/NOPB dual differential comparator comparator amplifier IC semiconductor open collector open drain input offset voltage propagation delay common-mode voltage range 8-pin PDIP DIP package through-hole package industrial sensor interface battery monitoring wired logic 36 V power supply single-supply operation
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ