LM2904AWYPT - Dual Low-Power Op Amp, 8-TSSOP | STMicroelectronics
MPN: LM2904AWYPT ✓ Hoạt độngLM2904AWYPT Tóm tắt
An operational amplifier is a voltage-controlled, high-gain analog building block used to amplify, buffer, filter, or compare small electrical signals. The LM2904 belongs to the dual general-purpose operational-amplifier family, combining two amplifier sections with internal frequency compensation in a single surface-mount IC. This type of device sits within the broader analog IC and semiconductor hierarchy and is commonly used between sensors, transducers, reference circuits, and downstream measurement or control stages.
Key features include two amplifier circuits in one package, low-power operation, internal frequency compensation, and an 8-pin TSSOP surface-mount form factor. The automotive identification is useful when the application requires an AEC-Q100-qualified device, although the exact temperature range, supply limits, input and output characteristics, slew rate, and common-mode performance should be confirmed against the STMicroelectronics datasheet for the exact order code. The package also supports compact PCB layouts where two amplifier channels must be placed close together.
The internal compensation allows the amplifier sections to operate without external frequency-compensation components in typical closed-loop configurations. That simplifies analog design and reduces the number of external components in feedback networks. Because the product is a dual amplifier, both channels have their own inputs and outputs, enabling common tasks such as differential sensing, active filtering, or complementary signal processing within one package. The manufacturer product page describes the device as two independent, high-gain operational amplifiers with internally implemented frequency compensation.
Typical applications include automotive sensor interfaces, industrial control modules, low-power signal-conditioning boards, battery-powered instruments, audio preamplifier stages, and general-purpose analog front ends. In an instrumentation application, one channel could amplify a sensor signal while the other handles buffering or an active-filter function. In a vehicle electronics module, the dual amplifier can reduce the number of discrete analog ICs while supporting a compact, surface-mount assembly.
The principal design consideration is to verify the exact electrical limits and recommended operating conditions before finalizing the power rails, input common-mode range, output swing, and external feedback network. Decoupling capacitors should be placed close to the supply pins, and the PCB layout should minimize parasitic capacitance and resistance on feedback and input nodes. The TSSOP package is small, so adequate copper and solder-joint quality remain important for reliable assembly.
This page combines manufacturer identification, distributor listings, cross-reference information, drop-in alternatives, and engineering-oriented design guidance for engineers evaluating LM2904AWYPT. It focuses on the distinctions that affect PCB compatibility, supply planning, signal conditioning, and automotive qualification rather than repeating only the basic catalog description.
Bộ thay thế dễ dàng lắp đặt cho LM2904AWYPT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LM2904AWYPT (cùng hình factor và footprint).
LM2904WYPT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LM2904AW
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LM2904AWYPT Tỷ lệ tối đa & tính chất điện
| Product Type | Dual operational amplifier |
| Number of Amplifier Circuits | 2 |
| Amplifier Configuration | Single-ended |
| Điện áp cung cấp | ±15 V to 30 V |
| Hộp | 8-TSSOP |
| Automotive Qualification | AEC-Q100 |
| Frequency Compensation | Internal |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Status | AEC-Q100 |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân LM2904AWYPT 8-tssop
Cấu hình chân cho LM2904AWYPT (8-tssop gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho LM2904AWYPT.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LM2904AWYPT phù hợp cho 6 Áp dụngs: Automotive Sensor Interface, Industrial Control Module, Battery-Powered Instrumentation, Audio Preamplifier Stage, Active Filter and Buffer, General-Purpose Analog Front End.
Automotive Sensor Interface
The LM2904AWYPT suits low-frequency automotive sensor front ends because it provides two independent amplifier channels in one 8-TSSOP package. One section can amplify a sensor signal while the other buffers, filters, or provides a complementary conditioning path. Its automotive listing identifies ±15 V / 30 V operation and AEC-Q100 qualification. The design must still verify input common-mode range, output swing, transient protection, and thermal conditions against the exact datasheet. A sensor near the vehicle supply may require separate protection rather than relying on amplifier robustness alone.
Được đề xuất
Industrial Control Module
The LM2904AWYPT can serve in an industrial control module as a dual low-power analog front end for slow sensor and control signals. The two sections allow a board to amplify one input and condition another without using two separate amplifier packages. Its internal frequency compensation simplifies ordinary closed-loop feedback arrangements, while the 8-TSSOP footprint supports compact control hardware. Confirm supply range, common-mode headroom, offset accuracy, and channel stability in the manufacturer datasheet before using it near high-voltage or high-speed signals.
Được đề xuất
Battery-Powered Instrumentation
For battery-powered instrumentation, the LM2904AWYPT provides two general-purpose amplifier channels in a compact package, helping reduce board area when the system processes multiple low-frequency channels. It can amplify a transducer output in one channel and buffer a reference or anti-aliasing network in the other. Low-power operation is inherent to the LM2904 family identification, but actual current consumption depends on the supply, load, and operating state. The system designer should check quiescent current and input bias current in the exact datasheet before estimating battery life.
Được đề xuất
Audio Preamplifier Stage
The LM2904AWYPT can be evaluated for low-frequency audio preamplification where two channels and compact placement are useful. One amplifier can provide voltage gain while the second handles input or output buffering in a stereo or dual-channel circuit. The TSSOP package helps reduce PCB footprint, and internal compensation removes the need for external compensation in standard feedback networks. Because the available excerpts do not specify noise, bandwidth, slew rate, or output swing, verify those parameters against the datasheet before selecting it for high-fidelity or high-level audio paths.
Được đề xuất
Active Filter and Buffer
The two independent amplifier sections in the LM2904AWYPT are useful for active filtering and buffering functions in compact analog boards. A resistive-capacitive feedback network can create a first-order active filter, while the second channel can buffer an intermediate node or provide a gain stage. Internal frequency compensation supports common closed-loop configurations, reducing external component count. The engineer should calculate resistor and capacitor tolerances against the required cutoff, phase margin, and gain accuracy, then confirm the actual stability and output-drive limits in the STMicroelectronics documentation.
Được đề xuất
General-Purpose Analog Front End
The LM2904AWYPT is a practical choice for a general-purpose analog front end requiring two amplifier functions in a small surface-mount package. It can combine signal amplification, impedance buffering, and threshold conditioning in a single IC while keeping the external circuit straightforward. The internal compensation and dual-channel structure are the main design benefits. Before finalizing the board, validate supply sequencing, input protection, biasing of bipolar inputs, and the output load against the exact manufacturer electrical characteristics. The automotive and standard ordering suffixes should be selected according to qualification requirements.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LM2904AWYPT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LM2904WYPT | LM2904AW |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Amplifier Circuits | 2 | 2 | 2 |
| Automotive Qualification | AEC-Q100 | Standard general-purpose listing | Automotive LM2904AW family |
| Frequency Compensation | Internal | Internal | Internal |
| Power Class | Low power | Low power | Low power |
Bảo phân biệt quan trọng
- Automotive-oriented ordering code (vsLM2904WYPT)
- Two-channel integration (vsLM2904AW)
- Internal compensation (vsLM2904WYPT)
Ghi chú thiết kế
Place the supply-decoupling capacitor as close as practical to the device supply and ground pins, and keep the feedback-loop traces short. For a dual amplifier, route each channel's input, feedback, and output connections independently to minimize shared parasitic coupling. Confirm the exact TSSOP land pattern and pin assignments against the STMicroelectronics package drawing before releasing the PCB.
Do not assume that the dual amplifier can accept arbitrary input signals merely because the nominal supply is identified as ±15 V / 30 V. Verify input common-mode range, output swing, input bias behavior, and stability for the actual feedback network. The two channels are independent, but they share the package and supply, so power sequencing and common supply-noise coupling still require attention.
Use a quiet ground reference and avoid routing high-current or switching-supply return paths beneath the amplifier inputs and feedback components. If the device is used near an automotive or industrial power rail, keep protection and filtering networks close to the connector or sensor interface. This reduces the chance that supply transients or board-level switching noise are interpreted as useful sensor signals.
Treat the amplifier as part of the analog signal path rather than as an isolation barrier. Decouple supply rails, avoid long unshielded high-impedance inputs, and use a defined return path for both channels. If a large capacitive load or an unusual feedback ratio is planned, verify stability and transient response from the manufacturer characteristic definitions before production.
Thông tin tuân thủ
AEC-Q100 qualification is identified in the Arrow listing for LM2904AWYPT. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not explicitly stated in the available excerpts and remain unknown.