LM324MTX/NOPB - Quad 1 MHz Op Amp | Texas Instruments
MPN: LM324MTX/NOPB ✓ Hoạt độngLM324MTX/NOPB Tóm tắt
An operational amplifier is a voltage-controlled differential amplifier used to amplify, buffer, filter, or compare analog signals. The LM324 family belongs to the operational-amplifier hierarchy within analog ICs and analog signal-chain components. Its internal frequency compensation removes the need for external compensation networks in conventional closed-loop gain configurations, simplifying implementation in general-purpose amplifier boards.
The quad configuration provides four amplifiers in one package, reducing PCB area and component count in designs requiring multiple analog channels. Key electrical characteristics include 1 MHz gain-bandwidth product, 0.3 V/µs slew rate, 20 nA input bias current, and 1 mV input offset voltage. The output stage can supply up to 40 mA per channel, while the low-power architecture supports portable and single-supply systems operating from 3 V to 32 V.
Internal frequency compensation makes the amplifier suitable for voltage gains near unity without external compensation capacitors. The 1 MHz bandwidth places the device in the general-purpose, low-to-moderate-frequency class rather than the precision or high-speed class. Designers should account for finite bandwidth and slew rate when processing larger or faster signals, and should verify output swing against the selected supply voltage before driving a load.
Typical uses include four-channel sensor conditioning, low-frequency active filters, general-purpose signal buffers, differential-to-single-ended conversion, and instrumentation interfaces. The four independent channels can also be configured as two differential amplifiers when signal polarity relationships require it. The 14-TSSOP package is appropriate for compact surface-mount assemblies, although its narrow lead pitch requires careful PCB layout and inspection.
For reliable layout, route input and feedback connections away from switching nodes and high-current return paths. Place input-biasing resistors close to the amplifier inputs to reduce leakage sensitivity, and use short feedback traces to minimize parasitic capacitance. Because this is a general-purpose amplifier rather than a rail-to-rail precision device, input common-mode range and output swing must be checked in the actual supply configuration.
This page combines the LM324MTX/NOPB electrical characteristics, package information, drop-in alternatives, comparison data, and practical PCB guidance to support faster component selection and implementation. Use the manufacturer pin-description table and recommended operating conditions when assigning PCB tracks and validating signal headroom.
Bộ thay thế dễ dàng lắp đặt cho LM324MTX/NOPB — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
LPV324MTX/NOPB
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TLV324MT/NOPB
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LM324MTX
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LM324MTX/NOPB Tỷ lệ tối đa & tính chất điện
| Amplifier Type | General-purpose, low-power operational amplifier |
| Number of Circuits | 4 circuits |
| Architecture | Four independent, internally frequency-compensated amplifiers |
| Supply Voltage Range | 3 V to 32 V |
| Gain-Bandwidth Product | 1 MHz |
| Slew Rate | 0.3 V/µs |
| Input Bias Current | 20 nA |
| Input Offset Voltage | 1 mV |
| Maximum Output Current per Channel | 40 mA |
| Hộp | 14-TSSOP, 0.173 inch / 4.40 mm width |
| Kiểu lắp đặt | Surface mount |
| Shipping Package | Tape and reel (TR) |
Hướng dẫn cấu hình chân LM324MTX/NOPB tape and reel (tr)
Cấu hình chân cho LM324MTX/NOPB (tape and reel (tr) gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho LM324MTX/NOPB.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LM324MTX/NOPB phù hợp cho 6 Áp dụngs: Low-Frequency Sensor Conditioning, Active Audio and Control Filters, General-Purpose Signal Buffering, Portable Battery-Powered Analog Circuits, Industrial Control Signal Conditioning, Test and Measurement Front Ends.
Low-Frequency Sensor Conditioning
The LM324MTX/NOPB is appropriate for conditioning resistive, temperature, and industrial sensor outputs when the signal bandwidth is far below the device's 1 MHz gain-bandwidth product. Each of the four internally compensated channels can amplify a low-level sensor signal with a closed-loop gain selected by external resistors. The 20 nA input bias current is important for high-impedance sources, while the 1 mV input offset establishes the baseline error engineers must include in accuracy calculations. Designers should verify input common-mode range and output swing against the sensor excitation before committing the circuit.
Được đề xuất
Active Audio and Control Filters
The LM324MTX/NOPB can implement low-frequency active filter stages because its 1 MHz gain-bandwidth product provides ample closed-loop bandwidth for audio-band and industrial-control corner frequencies. The 0.3 V/µs slew rate helps preserve low-distortion output for moderate-amplitude signals, while internal frequency compensation simplifies basic non-inverting and inverting amplifier configurations. Four independent channels make cascaded sections practical. Engineers should calculate maximum signal amplitude and gain so that the 0.3 V/µs slew rate does not become the limiting factor and should confirm output headroom.
Được đề xuất
General-Purpose Signal Buffering
The LM324MTX/NOPB is well suited to buffering sensor outputs, ADC driver inputs, and control signals where a higher input impedance or adjustable offset is required. Its four independent channels allow one package to replace several discrete single amplifiers, while the 40 mA per-channel output capability provides useful drive for moderate loads. A unity-gain buffer configuration remains well within the 1 MHz bandwidth limit, but input offset and bias currents still contribute to total error. Keep feedback loops short and check capacitive loading for stability.
Được đề xuất
Portable Battery-Powered Analog Circuits
The LM324MTX/NOPB supports battery-powered instrumentation because it can operate from a single supply starting at 3 V. The low-power general-purpose architecture provides four channels without requiring negative supplies for many input and output arrangements. Its 1 MHz gain-bandwidth product is appropriate for low-frequency health-monitoring, portable instrumentation, and measurement loops rather than high-speed waveform processing. Because the broad 3 V to 32 V rating does not imply rail-to-rail operation, the actual input common-mode range and output swing must remain inside the usable signal region.
Được đề xuất
Industrial Control Signal Conditioning
The LM324MTX/NOPB fits 3 V to 32 V industrial control circuits that require amplification, comparison, or current-to-voltage conversion of slow control signals. Its four independent channels can process several sensing or actuation paths in one package, and the 1 MHz bandwidth is more than sufficient for many process-control loops. The 20 nA input bias current supports relatively high source impedances, while the 1 mV offset may require calibration in precision measurements. PCB layout should isolate sensitive input traces from motors, relays, and high-current switching paths.
Được đề xuất
Test and Measurement Front Ends
The LM324MTX/NOPB can form the input-conditioning section of a general-purpose test and measurement instrument when the measured bandwidth is below 1 MHz. Four channels support differential measurements, excitation buffering, midpoint references, and gain stages within one 14-TSSOP package. The 0.3 V/µs slew rate is suitable for many low-frequency sine and triangular waveforms, but engineers must limit amplitude or bandwidth when the required output cannot be reached. Low-noise layout, grounded reference connections, and short feedback paths help preserve measurement fidelity.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LM324MTX/NOPB — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LPV324MTX/NOPB | TLV324MT/NOPB | LM324MTX |
|---|---|---|---|---|
| Package | 14-TSSOP | 14-TSSOP | 14-TSSOP | 14-TSSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | ROHM Semiconductor |
| Number of Amplifiers | 4 circuits | 4 circuits | 4 circuits | 4 circuits |
Bảo phân biệt quan trọng
- Broad single-supply operating range (vsTLV324MT/NOPB)
- Matched core performance from a cross-brand source (vsLM324MTX)
- Four independent channels in one compact package (vsSingle-channel general-purpose alternatives)
Ghi chú thiết kế
Use the manufacturer pin-description table to assign all 14 TSSOP connections and verify that the selected land pattern corresponds to the 14-pin package. Place each amplifier's input and feedback components close to their associated pins, and avoid routing high-impedance input traces beneath power or switching nets. The LM324MTX/NOPB includes four independent amplifiers in one package, so partitioning each channel's critical analog path can prevent coupling between measurement channels.
The 1 MHz gain-bandwidth product and 0.3 V/µs slew rate set the usable bandwidth and large-signal response limits. For a closed-loop gain of G, the approximate small-signal bandwidth is 1 MHz divided by G, while the required slew rate rises with output amplitude and frequency. Check these calculations before using the amplifier with fast edges or large waveforms. If the source can present significant capacitance, add isolation resistance and verify stability on the assembled board.
Do not assume that the 3 V to 32 V supply rating makes the LM324MTX/NOPB rail-to-rail. Confirm the usable input common-mode range and output swing for the selected supply, especially near 3 V or 5 V. Also account for the 1 mV input offset and 20 nA input bias current in precision measurements. For high-impedance sources, use guarding or insulation techniques and keep board contamination away from the input pins.
Thông tin tuân thủ
The LM324MTX/NOPB is a general-purpose commercial operational amplifier rather than an automotive-qualified AEC-Q100 device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established by the cited ordering information.
