LPC4315JBD144551 - 204MHz Dual-Core Cortex-M4/M0 MCU | NXP
MPN: LPC4315JBD144551 ✓ Hoạt độngLPC4315JBD144551 Tóm tắt
A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile program memory, volatile data memory, and peripherals such as timers, communication controllers, and interrupt controllers. Within the broader hierarchy, this device belongs to the embedded processor and microcontroller class, combining real-time control capability with extensive serial networking interfaces. The dual-core architecture allows the M0 core to handle deterministic background tasks while the M4 core executes application code.
The LPC4315JBD144551 provides 768 KB of flash for firmware, 136 KB of SRAM for working data, and up to 16 KB of EEPROM within the LPC43xx family. Its advanced peripherals include Ethernet, two high-speed USB interfaces, a quad SPI Flash Interface, the State Configurable Timer, and SGPIO. These resources support gateways, industrial controllers, data acquisition systems, USB peripherals, and connected embedded equipment without requiring a separate Ethernet or USB controller.
Architecturally, the M4 core handles complex control logic while the M0 coprocessor can offload peripheral servicing and reduce interrupt latency on the main core. The family supports extensive programmable peripherals, allowing pin and timer functions to be routed more flexibly than on a fixed-function microcontroller. The 144-LQFP package provides a large peripheral complement and adequate pin count for multi-interface industrial boards.
Typical applications include industrial Ethernet bridges, USB-to-Ethernet equipment, factory data concentrators, building automation controllers, and test-and-measurement instruments. For designs where deterministic peripheral servicing matters, the independent M0 core can execute tasks alongside the 204 MHz M4 core. The operating temperature range of -40°C to +105°C supports industrial environments, although final product qualification should cover the complete thermal envelope.
Design the PCB with short, controlled-length routes from the 144-LQFP leads and provide the complete set of decoupling capacitors specified by NXP. Confirm peripheral multiplexing, power rails, clock configuration, and package thermal performance against the manufacturer datasheet before release. Treat the LPC43xx errata material as part of the firmware qualification process, because peripheral behavior may depend on the silicon revision.
This page organizes the LPC4315JBD144551 specifications, sourcing information, package details, and same-family alternatives into one engineering reference. It also adds design guidance, application fit analysis, and a parameter-by-parameter comparison to support sourcing and design decisions beyond the basic manufacturer product listing.
Bộ thay thế dễ dàng lắp đặt cho LPC4315JBD144551 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LPC4315JBD144551 (cùng hình factor và footprint) — khác nhau ở Ethernet Interface, On-Chip SRAM, Package, Product Type.
LPC4315JBD144E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LPC4315JBD144E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LPC4315JBD1445
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LPC4315JBD14455
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LPC4315JBD144551 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit dual-core microcontroller |
| Main Processor | Arm Cortex-M4 |
| Coprocessor | Arm Cortex-M0 |
| Maximum CPU Frequency | 204 MHz |
| Flash Memory | 768 KB |
| Flash Organization | 768K x 8 |
| On-Chip SRAM | 136 KB |
| On-Chip EEPROM | 16 KB |
| Ethernet Interface | 1 Ethernet interface |
| USB Interface | 2 high-speed USB interfaces |
| Quad SPI Flash Interface | SPIFI with quad SPI support |
| Advanced Timers | State Configurable Timer (SCT) |
| Serial GPIO | SGPIO interface |
| Core Size | 32-bit |
| Nhiệt độ hoạt động | -40°C to +105°C |
| Hộp | 144-LQFP (20 x 20 mm) |
| Kiểu lắp đặt | Surface mount |
| Core Count | 2 |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân LPC4315JBD144551 144-lqfp (20 x 20 mm)
Cấu hình chân cho LPC4315JBD144551 (144-lqfp (20 x 20 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho LPC4315JBD144551.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LPC4315JBD144551 phù hợp cho 6 Áp dụngs: Industrial Ethernet Gateway, USB Data Acquisition Controller, Factory Automation Controller, Building Automation and HVAC Controller, Connected Test and Measurement Instrument, Motor Control and Real-Time Control Hub.
Industrial Ethernet Gateway
The LPC4315JBD144551 fits an industrial Ethernet gateway because it combines Ethernet connectivity with a 204 MHz Cortex-M4 core for protocol processing and an independent Cortex-M0 core for background peripheral work. Its 768 KB of flash accommodates TCP/IP stacks, web interfaces, and firmware, while 136 KB of SRAM supports packet buffering and multi-task execution. The two USB interfaces allow local configuration or storage access without an additional controller. Place the MCU behind an Ethernet PHY and isolate high-speed network and USB routing from sensitive analog sections.
Được đề xuất
USB Data Acquisition Controller
For a USB data acquisition controller, the LPC4315JBD144551 provides two high-speed USB interfaces alongside 136 KB of SRAM and 768 KB of flash. The M4 core can execute sampling control, buffering, and host protocol logic, while the M0 core can service time-critical timer and serial interrupts. The State Configurable Timer supports flexible counting or PWM functions, and SGPIO provides additional configurable digital I/O. Validate USB impedance routing and place the MCU decoupling close to each supply pin to minimize high-frequency supply disturbance.
Được đề xuất
Factory Automation Controller
The LPC4315JBD144551 suits factory automation controllers that combine network management with real-time machine I/O. Its Cortex-M4 core runs application logic at up to 204 MHz, while the Cortex-M0 coprocessor can handle deterministic peripheral servicing, reducing interference on the main core. The State Configurable Timer, SGPIO, Ethernet, and USB interfaces cover timing, expansion, network management, and service connectivity in one device. The -40°C to +105°C rating supports industrial temperature conditions, subject to proper board-level thermal design and product qualification.
Được đề xuất
Building Automation and HVAC Controller
A building automation controller benefits from the LPC4315JBD144551's combination of Ethernet connectivity, extensive configurable I/O, and dual-core processing. The M4 core can manage communication stacks, scheduling, and control logic, while the M0 core can service sensor interrupts, timers, and serial peripherals. The 768 KB flash and 136 KB SRAM are sufficient for local web services, protocol conversion, and state retention during development. Use the SPIFI interface for external flash when logs, configuration data, or firmware images exceed the internal storage budget.
Được đề xuất
Connected Test and Measurement Instrument
The LPC4315JBD144551 can serve as the control processor in a networked measurement instrument that needs high-speed USB, Ethernet, and configurable timing. The Cortex-M4 core manages the user interface and measurement control path, while the Cortex-M0 core can handle low-latency peripheral tasks. Internal SRAM supports acquisition buffers and protocol state, and the quad SPI Flash Interface offers a path to external storage or fast configuration data. Separate analog and digital grounding, careful USB layout, and scheduled peripheral servicing are essential for accurate measurements.
Được đề xuất
Motor Control and Real-Time Control Hub
The LPC4315JBD144551 can coordinate real-time control and communications in motor-oriented systems. The 204 MHz Cortex-M4 core handles motion algorithms and supervisory logic, while the Cortex-M0 coprocessor executes time-sensitive peripheral routines and reduces interrupt contention. The State Configurable Timer can support precise timing functions, and Ethernet or USB can expose configuration, diagnostics, and firmware updates. Keep switching-node power stages physically separated from the MCU area, and validate timer accuracy and control-loop latency against the system timing budget.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LPC4315JBD144551 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LPC4315JBD144 | LPC4315JBD144E | LPC4315JBD1445 | LPC4315JBD14455 |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 144-LQFP (20 x 20 mm) | 144-LQFP (20 x 20 mm) - same | 144-LQFP (20 x 20 mm) - same | 144-LQFP (20 x 20 mm) - same | 144-LQFP (20 x 20 mm) - same |
| Main Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Coprocessor | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 |
| Maximum CPU Frequency | 204 MHz | 204 MHz | 204 MHz | 204 MHz | 204 MHz |
| Flash Memory | 768 KB | 768 KB | 768 KB | 768 KB | 768 KB |
| On-Chip SRAM | 136 KB | 136 KB | 136 KB | 136 KB | 136 KB |
| Ethernet | 1 Ethernet interface | 1 Ethernet interface | 1 Ethernet interface | 1 Ethernet interface | 1 Ethernet interface |
| USB Interfaces | 2 high-speed USB interfaces | 2 high-speed USB interfaces | 2 high-speed USB interfaces | 2 high-speed USB interfaces | 2 high-speed USB interfaces |
Bảo phân biệt quan trọng
- Dual-core processing in the same 144-LQFP footprint (vsLPC4315JBD144)
- Integrated network and high-speed USB connectivity (vsLPC4315JBD144E)
- Configurable real-time peripherals for industrial designs (vsLPC4315JBD1445)
- Industrial temperature capability (vsLPC4315JBD14455)
Ghi chú thiết kế
Decouple every device supply pin with the capacitors and placement specified in the NXP LPC43xx hardware design guidance. Place the smallest-capacitance bypass capacitors closest to the pins, retain the larger bulk capacitors near the power-entry point, and keep the return path continuous under the package. Confirm regulator voltage accuracy, startup sequencing, and current margin against the selected clock configuration and enabled peripherals before PCB release.
Treat Ethernet, USB, and SPIFI routing as high-speed signal-integrity constraints. Use the manufacturer reference layout, preserve continuous return planes beneath high-speed pairs, and avoid splitting the ground plane beneath the LQFP. Place external crystals and their load capacitors close to the relevant pins, and keep switching regulators, magnetic components, and high-current interfaces away from the oscillator and sensitive clock routing.
Do not assume every LPC4315 order code is a direct procurement substitute. Check the NXP ordering-information table for the meaning of the J, B, D, 144, and trailing digits before releasing the substitute onto a PCB. Also review the LPC435x/3x/2x/1x errata material for the silicon revision, because documented peripheral limitations can affect timer, USB, Ethernet, or SPIFI behavior.
Estimate junction temperature from the actual operating mode rather than CPU utilization alone. Ethernet PHY, USB, and external memory activity can create I/O activity that raises device power independently of the core clock. Use the package thermal data and measured board thermal resistance for the final calculation, then verify the worst-case ambient temperature, supply voltage, and peripheral activity during system qualification.
Thông tin tuân thủ
The component is identified as RoHS-compliant original manufacturer stock. No automotive qualification or additional environmental compliance claim is made for this ordering code.