LT1638IDD - 1.2MHz Dual R-R Op Amp | Analog Devices
MPN: LT1638IDD ✓ Hoạt độngLT1638IDD Tóm tắt
An operational amplifier is a high-gain differential amplifier used to amplify, buffer, filter, or compare small analog signals. The LT1638 belongs to the rail-to-rail input and output op-amp family, which supports input and output voltage ranges close to the supply rails. Its over-the-top input architecture extends useful operation beyond the positive supply rail, making it useful when the signal can approach or exceed the upper supply limit.
The principal features are a 1.2 MHz gain-bandwidth product, 0.4 V/µs slew rate, rail-to-rail input and output operation, and low-power design. Two amplifiers are integrated in one package, reducing board area compared with separate single amplifiers. The 8-DFN package is intended for surface-mount assembly in space-constrained analog systems.
Internally, the LT1638 is designed for low-power operation and signal-chain use where bandwidth, low quiescent consumption, and rail-to-rail behavior matter more than high slew rate. Its 1.2 MHz gain-bandwidth product supports moderate-frequency closed-loop amplification, while the 0.4 V/µs slew rate limits how quickly the output can follow large voltage changes. Designers should account for both limits when setting gain, bandwidth, and output-amplitude requirements.
Typical uses include battery-powered instrumentation, portable sensor interfaces, low-level signal conditioning, current sensing, transducers, and analog control loops. The dual configuration can implement two gain stages, a differential amplifier, an instrumentation-style signal chain, or a comparator configuration. The small DFN footprint is especially useful when a system requires two analog channels without allocating two separate packages.
When designing a PCB, follow the manufacturer pin-description table and exposed-pad connection guidance when assigning tracks. Confirm that the selected DFN land pattern supports the package dimensions and terminal arrangement. Place input, output, bypass, and exposed-pad connections to minimize parasitic resistance and inductance, particularly when the amplifier is operated at the upper end of its bandwidth.
This product page organizes the LT1638IDD identity, package information, search-focused technical guidance, practical application fit, and verified manufacturer documentation into one engineering reference. It also distinguishes confirmed device characteristics from parameters that require confirmation in the complete LT1638/LT1639 datasheet before a production design is released.
Bộ thay thế dễ dàng lắp đặt cho LT1638IDD — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
LT1638IDD#PBF
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LT1638CDD
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LT1638IDD Tỷ lệ tối đa & tính chất điện
| Amplifier Type | Dual operational amplifier |
| Number of Channels | 2 channels |
| Gain-Bandwidth Product | 1.2 MHz |
| Slew Rate | 0.4 V/µs |
| Input Architecture | Over-the-top |
| Input Common-Mode Range | Rail-to-rail |
| Output Swing | Rail-to-rail |
| Power Class | Micropower |
| Hộp | 8-DFN (3 mm × 3 mm) |
| Package Height | 0.8 mm |
| Kiểu lắp đặt | Surface mount |
| Supply Voltage Range | 2.5 V to 44 V |
| Input Offset Voltage | 450 µV maximum |
| Production Status | Production |
| Product Classification | Standard general-purpose amplifier |
Hướng dẫn cấu hình chân LT1638IDD 0.8 mm
Cấu hình chân cho LT1638IDD (0.8 mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho LT1638IDD.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LT1638IDD phù hợp cho 6 Áp dụngs: Portable Sensor Signal Conditioning, Battery-Powered Instrumentation, Current-Sensing Amplifier, Low-Level Analog Filtering, Low-Voltage Control Loops, Portable Measurement Front Ends.
Portable Sensor Signal Conditioning
The LT1638IDD fits portable sensor interfaces that require two amplifier channels in a compact footprint. Rail-to-rail input operation allows signals to occupy more of the available input range, while over-the-top input capability is useful when a sensor signal approaches or exceeds the positive supply rail. The dual 8-DFN package reduces board area compared with two separate single amplifiers. For a typical conditioning chain, one channel can amplify the sensor output and the second can provide gain, buffering, or active filtering. The 1.2 MHz gain-bandwidth product supports moderate-bandwidth sensor signals, but the 0.4 V/µs slew rate must be checked against the required output amplitude and waveform shape.
Được đề xuất
Battery-Powered Instrumentation
The LT1638IDD is appropriate for low-power instrumentation stages in which two analog channels must fit into a limited board area. Its micropower-oriented architecture supports compact battery-powered systems, while rail-to-rail input and output behavior improves signal utilization across the available supply range. The dual amplifier can implement separate gain and filtering channels, or use the two amplifiers in an instrumentation-style arrangement when the circuit topology allows it. The 3 mm × 3 mm DFN package also reduces routing area compared with two larger dual packages. Before finalizing the power budget, verify quiescent current, shutdown behavior, input bias current, and output-load limits in the complete manufacturer electrical-characteristics table.
Được đề xuất
Current-Sensing Amplifier
The LT1638IDD can support current-sense amplification when the shunt voltage and required common-mode range remain within the device's operating limits. Rail-to-rail input operation is valuable in low-voltage systems because the sensed signal can use much of the available input span. The 1.2 MHz gain-bandwidth product is sufficient for many moderate-bandwidth current measurements, and the 0.4 V/µs slew rate helps the output follow changing shunt voltage. The second amplifier can provide post-amplification, filtering, or a separate signal path. Validate shunt impedance, input bias-current error, offset error, output swing, and amplifier stability against the application before committing the circuit.
Được đề xuất
Low-Level Analog Filtering
The LT1638IDD is suitable for active analog filters that process signals at moderate frequencies. Its 1.2 MHz gain-bandwidth product permits useful closed-loop bandwidth at practical noise gains, while two independent channels can implement a second-order filter stage followed by gain or buffering. Rail-to-rail input and output operation helps preserve signal swing in compact mixed-signal systems. The device's 3 mm × 3 mm 8-DFN package also keeps the footprint smaller than two separate single-channel packages. Because op-amp behavior near the rails and at high noise gain can affect distortion and stability, review the typical-performance curves and follow the recommended compensation and layout practices in the manufacturer datasheet.
Được đề xuất
Low-Voltage Control Loops
The LT1638IDD can serve as an error amplifier or active feedback element in compact low-voltage control systems. Rail-to-rail input and output operation allows the loop to use a substantial portion of the supply range, while the over-the-top input characteristic adds flexibility when the feedback or error signal extends above the positive rail. The dual channel can implement a control amplifier together with a monitor, buffer, or auxiliary feedback function. Its 1.2 MHz bandwidth provides loop response beyond many slow precision-control loops, although stability, phase margin, output-current capability, and slew-rate limits must be analyzed for each topology. Place the device close to feedback components to reduce added delay and susceptibility to PCB noise.
Được đề xuất
Portable Measurement Front Ends
The LT1638IDD fits two-channel portable measurement front ends where a sensor or transducer signal requires amplification followed by conditioning. One amplifier channel can provide low-level gain and the other can implement filtering, offsetting, or another analog function. The 3 mm × 3 mm 8-DFN package is advantageous in handheld and embedded instruments, while rail-to-rail input and output behavior improves utilization of low supply voltages. The 1.2 MHz gain-bandwidth product suits many sensor bandwidths but does not replace a high-speed amplifier for signals with sharp edges or high-frequency content. Confirm offset, input bias current, noise, settling behavior, and load-drive capability from the manufacturer data before defining the measurement accuracy.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LT1638IDD — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LT1638IDD#PBF | LT1638CDD |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 8-DFN (3 mm × 3 mm) | 8-DFN (3 mm × 3 mm) | 8-DFN (3 mm × 3 mm) |
| Amplifier Configuration | Dual operational amplifier | Dual operational amplifier | Dual operational amplifier |
| Ordering Qualification | LT1638IDD base designation | Lead-free orderable designation | Same-family temperature-grade designation |
Bảo phân biệt quan trọng
- Combines two amplifier channels in a 3 mm × 3 mm DFN (vsLT1639)
- Over-the-top input capability (vsGeneral-purpose rail-to-rail dual op amps)
- Direct lead-free orderable designation (vsLT1638IDD)
Ghi chú thiết kế
Use the Analog Devices LT1638/LT1639 datasheet pin-description table and exposed-pad instructions as the authoritative layout references. Keep the two amplifier channels and their feedback networks compact, place input traces away from switching nodes, and route sensitive input connections over a continuous ground plane. The DFN exposed pad must be connected according to the manufacturer package recommendation; do not infer its electrical function from generic DFN examples.
Do not equate the 1.2 MHz gain-bandwidth product with 1.2 MHz usable closed-loop bandwidth at every gain. Closed-loop bandwidth is reduced by noise gain, and large output transitions may be limited by the 0.4 V/µs slew rate. Check settling time, minimum stable gain, output load, input common-mode range, and output swing in the electrical-characteristics and typical-performance sections before selecting the gain.
Estimate total supply dissipation from the actual output voltage, output current, supply voltage, and amplifier quiescent current before committing to the compact DFN layout. The calculated dissipation is approximately the sum of each amplifier's output-current contribution multiplied by its supply-to-output voltage difference, plus quiescent dissipation. Compare that estimate with the package thermal limits and exposed-pad copper area; add thermal copper where the calculated loss is substantial.
Keep feedback components close to the relevant amplifier inputs and outputs to minimize parasitic capacitance and feedback-loop delay. Place input-referenced bypass capacitance near the supply pins and preserve a low-impedance return for output currents. When driving a capacitive load, verify stability from the manufacturer data rather than adding arbitrary series resistance that could degrade output-current accuracy or increase output-voltage offset.
Thông tin tuân thủ
The LT1638IDD#PBF ordering suffix identifies a lead-free orderable configuration, but formal RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification statements are not confirmed in the cited product summaries. Verify these declarations against the current Analog Devices product documentation and quality declarations.