Analog Devices

LT1638IDD - 1.2MHz Dual R-R Op Amp | Analog Devices

料号: LT1638IDD ✓ 量产中
2.5 V to 44 V Vdss 8-DFN (3 mm × 3 mm) Package
最小起订量: 1 |

LT1638IDD 概述

Analog Devices LT1638IDD is a dual, micropower, over-the-top operational amplifier with rail-to-rail input and rail-to-rail output capability. It provides a 1.2 MHz gain-bandwidth product and a 0.4 V/µs slew rate in an 8-lead dual fine-pitch leadless DFN package measuring 3 mm × 3 mm × 0.8 mm. The LT1638IDD is a standard general-purpose amplifier optimized for compact, low-power analog signal-conditioning circuits.

An operational amplifier is a high-gain differential amplifier used to amplify, buffer, filter, or compare small analog signals. The LT1638 belongs to the rail-to-rail input and output op-amp family, which supports input and output voltage ranges close to the supply rails. Its over-the-top input architecture extends useful operation beyond the positive supply rail, making it useful when the signal can approach or exceed the upper supply limit.

The principal features are a 1.2 MHz gain-bandwidth product, 0.4 V/µs slew rate, rail-to-rail input and output operation, and low-power design. Two amplifiers are integrated in one package, reducing board area compared with separate single amplifiers. The 8-DFN package is intended for surface-mount assembly in space-constrained analog systems.

Internally, the LT1638 is designed for low-power operation and signal-chain use where bandwidth, low quiescent consumption, and rail-to-rail behavior matter more than high slew rate. Its 1.2 MHz gain-bandwidth product supports moderate-frequency closed-loop amplification, while the 0.4 V/µs slew rate limits how quickly the output can follow large voltage changes. Designers should account for both limits when setting gain, bandwidth, and output-amplitude requirements.

Typical uses include battery-powered instrumentation, portable sensor interfaces, low-level signal conditioning, current sensing, transducers, and analog control loops. The dual configuration can implement two gain stages, a differential amplifier, an instrumentation-style signal chain, or a comparator configuration. The small DFN footprint is especially useful when a system requires two analog channels without allocating two separate packages.

When designing a PCB, follow the manufacturer pin-description table and exposed-pad connection guidance when assigning tracks. Confirm that the selected DFN land pattern supports the package dimensions and terminal arrangement. Place input, output, bypass, and exposed-pad connections to minimize parasitic resistance and inductance, particularly when the amplifier is operated at the upper end of its bandwidth.

This product page organizes the LT1638IDD identity, package information, search-focused technical guidance, practical application fit, and verified manufacturer documentation into one engineering reference. It also distinguishes confirmed device characteristics from parameters that require confirmation in the complete LT1638/LT1639 datasheet before a production design is released.

直接替换替代料: LT1638IDD ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

LT1638IDD#PBF

✅ 直接替换
📦 8-DFN (3 mm × 3 mm)
Lead-free orderable designation of the LT1638IDD; electrical ratings and 8-DFN footprint match, with no quantified performance difference

📋 参考替代料(不在目录中)

LT1638CDD

✅ 直接替换
📦 8-DFN (3 mm × 3 mm)
Same-family dual op amp in the 8-DFN format; temperature-grade and ordering-code limits require confirmation, while core gain-bandwidth and slew-rate classes remain comparable

📋 参考替代料(不在目录中)

LT1638IDD 最大额定值与电气特性

Amplifier Type Dual operational amplifier
Number of Channels 2 channels
Gain-Bandwidth Product 1.2 MHz
Slew Rate 0.4 V/µs
Input Architecture Over-the-top
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Power Class Micropower
封装 8-DFN (3 mm × 3 mm)
Package Height 0.8 mm
安装类型 Surface mount
Supply Voltage Range 2.5 V to 44 V
Input Offset Voltage 450 µV maximum
Production Status Production
Product Classification Standard general-purpose amplifier

LT1638IDD 0.8 mm 引脚配置指南

LT1638IDD(0.8 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

LT1638IDD 的 0.8 mm 封装引脚图

暂无详细引脚数据: LT1638IDD.

请参阅 数据手册 以查看完整引脚配置。

典型应用

LT1638IDD 适用于 6 应用s: Portable Sensor Signal Conditioning, Battery-Powered Instrumentation, Current-Sensing Amplifier, Low-Level Analog Filtering, Low-Voltage Control Loops, Portable Measurement Front Ends.

📱

Portable Sensor Signal Conditioning

The LT1638IDD fits portable sensor interfaces that require two amplifier channels in a compact footprint. Rail-to-rail input operation allows signals to occupy more of the available input range, while over-the-top input capability is useful when a sensor signal approaches or exceeds the positive supply rail. The dual 8-DFN package reduces board area compared with two separate single amplifiers. For a typical conditioning chain, one channel can amplify the sensor output and the second can provide gain, buffering, or active filtering. The 1.2 MHz gain-bandwidth product supports moderate-bandwidth sensor signals, but the 0.4 V/µs slew rate must be checked against the required output amplitude and waveform shape.

⚡

Battery-Powered Instrumentation

The LT1638IDD is appropriate for low-power instrumentation stages in which two analog channels must fit into a limited board area. Its micropower-oriented architecture supports compact battery-powered systems, while rail-to-rail input and output behavior improves signal utilization across the available supply range. The dual amplifier can implement separate gain and filtering channels, or use the two amplifiers in an instrumentation-style arrangement when the circuit topology allows it. The 3 mm × 3 mm DFN package also reduces routing area compared with two larger dual packages. Before finalizing the power budget, verify quiescent current, shutdown behavior, input bias current, and output-load limits in the complete manufacturer electrical-characteristics table.

📟

Current-Sensing Amplifier

The LT1638IDD can support current-sense amplification when the shunt voltage and required common-mode range remain within the device's operating limits. Rail-to-rail input operation is valuable in low-voltage systems because the sensed signal can use much of the available input span. The 1.2 MHz gain-bandwidth product is sufficient for many moderate-bandwidth current measurements, and the 0.4 V/µs slew rate helps the output follow changing shunt voltage. The second amplifier can provide post-amplification, filtering, or a separate signal path. Validate shunt impedance, input bias-current error, offset error, output swing, and amplifier stability against the application before committing the circuit.

📶

Low-Level Analog Filtering

The LT1638IDD is suitable for active analog filters that process signals at moderate frequencies. Its 1.2 MHz gain-bandwidth product permits useful closed-loop bandwidth at practical noise gains, while two independent channels can implement a second-order filter stage followed by gain or buffering. Rail-to-rail input and output operation helps preserve signal swing in compact mixed-signal systems. The device's 3 mm × 3 mm 8-DFN package also keeps the footprint smaller than two separate single-channel packages. Because op-amp behavior near the rails and at high noise gain can affect distortion and stability, review the typical-performance curves and follow the recommended compensation and layout practices in the manufacturer datasheet.

🏭

Low-Voltage Control Loops

The LT1638IDD can serve as an error amplifier or active feedback element in compact low-voltage control systems. Rail-to-rail input and output operation allows the loop to use a substantial portion of the supply range, while the over-the-top input characteristic adds flexibility when the feedback or error signal extends above the positive rail. The dual channel can implement a control amplifier together with a monitor, buffer, or auxiliary feedback function. Its 1.2 MHz bandwidth provides loop response beyond many slow precision-control loops, although stability, phase margin, output-current capability, and slew-rate limits must be analyzed for each topology. Place the device close to feedback components to reduce added delay and susceptibility to PCB noise.

🖥️

Portable Measurement Front Ends

The LT1638IDD fits two-channel portable measurement front ends where a sensor or transducer signal requires amplification followed by conditioning. One amplifier channel can provide low-level gain and the other can implement filtering, offsetting, or another analog function. The 3 mm × 3 mm 8-DFN package is advantageous in handheld and embedded instruments, while rail-to-rail input and output behavior improves utilization of low supply voltages. The 1.2 MHz gain-bandwidth product suits many sensor bandwidths but does not replace a high-speed amplifier for signals with sharp edges or high-frequency content. Confirm offset, input bias current, noise, settling behavior, and load-drive capability from the manufacturer data before defining the measurement accuracy.

推荐产品汇总

LT1639 Four-channel member of the same dual-rail-to-rail op-amp family 用于: Portable Sensor Signal Conditioning, Battery-Powered Instrumentation, Current-Sensing Amplifier, Low-Level Analog Filtering, Low-Voltage Control Loops, Portable Measurement Front Ends LT1638CDD Same-family dual amplifier for an alternate procurement configuration 用于: Portable Sensor Signal Conditioning, Current-Sensing Amplifier, Low-Voltage Control Loops LT1638IDD#PBF Lead-free orderable configuration of the dual amplifier 用于: Battery-Powered Instrumentation, Low-Level Analog Filtering, Portable Measurement Front Ends
What are the key specifications of LT1638IDD that engineers should know?
The LT1638IDD is a dual, micropower operational amplifier featuring a 1.2 MHz gain-bandwidth product, a 0.4 V/µs slew rate, over-the-top input capability, and rail-to-rail input and output operation. According to the Analog Devices LT1638/LT1639 datasheet, it is packaged in an 8-lead DFN measuring 3 mm × 3 mm × 0.8 mm. These characteristics position it for low-power, moderate-bandwidth signal conditioning rather than high-speed waveform or precision instrumentation applications.
What type of operational amplifier is the LT1638IDD?
The LT1638IDD is a dual rail-to-rail input and output operational amplifier with an over-the-top input architecture. Analog Devices describes it as a micropower device intended for space-limited applications. The two amplifiers share one 8-DFN package, while the 1.2 MHz gain-bandwidth product and 0.4 V/µs slew rate make the device suitable for moderate-frequency amplification, buffering, filtering, and analog signal conditioning.
Where can I download the LT1638IDD datasheet PDF?
The official LT1638/LT1639 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/16389fg.pdf. The manufacturer product page is also available at https://www.analog.com/en/products/lt1638.html. Use the manufacturer datasheet for the complete pin-description table, electrical characteristics, package drawing, exposed-pad requirements, and operating limits before releasing a PCB design.
Where can I find the LT1638IDD pinout and package drawing?
The LT1638IDD pin assignment and mechanical drawing are contained in the LT1638/LT1639 manufacturer datasheet at https://www.analog.com/media/en/technical-documentation/data-sheets/16389fg.pdf. The device uses an 8-lead DFN package measuring 3 mm × 3 mm × 0.8 mm. Because individual terminal functions are not stated in the product summary, use the pin-description table and exposed-pad note in the datasheet rather than inferring connections from a generic dual-op-amp layout.
Where to buy LT1638IDD online and how do I request a quote?
The LT1638IDD can be requested through the Request a Quote form on this XAIPART product page. The form should be used to confirm the exact ordering suffix, manufacturer lead time, minimum order quantity, and current availability for the 8-DFN package. The base LT1638IDD designation and orderable variants such as LT1638IDD#PBF should be confirmed before release so the supply chain receives the intended part number.
What is the current price of the LT1638IDD?
The current commercial price is not stated as a fixed value on this page because it can change with quantity, market conditions, and the exact orderable suffix. Use the Request a Quote form on this page for the LT1638IDD and specify your required quantity, package form, and target delivery schedule. This keeps the quotation tied to the current order rather than presenting a stale standalone price.
What is the lead time and stock status for LT1638IDD?
Current stock and lead time should be confirmed through the Request a Quote form on this XAIPART page. When requesting a quote, identify LT1638IDD, state the required quantity, and specify whether the lead-free orderable designation LT1638IDD#PBF is acceptable. The Analog Devices product page identifies the LT1638 family as production, but current inventory and manufacturing capacity remain order-specific commercial details.
Is the LT1638IDD in stock?
The LT1638IDD is a production-family device, but current inventory should not be inferred solely from that production status. Use the Request a Quote form on this page to request the current stock position for LT1638IDD and the required orderable suffix. Include your quantity and delivery requirements so the response can distinguish standard inventory from any scheduled or factory-backed supply.
What can replace the LT1638IDD?
The closest confirmed replacement is the Analog Devices LT1638IDD#PBF, which identifies the lead-free orderable form of the LT1638IDD in the same 8-DFN package. The LT1638CDD is another same-family DFN option found in cross-reference results, but its temperature-grade and ordering details must be checked before substitution. Confirm pin assignments, supply range, offset, bandwidth, slew rate, and exposed-pad requirements in the manufacturer datasheet.
Can LT1638CDD replace LT1638IDD without PCB changes?
The LT1638CDD can be considered a same-family 8-DFN candidate, but it should be treated as a qualified substitution rather than an automatic drop-in replacement. The Analog Devices LT1638/LT1639 datasheet should be used to compare temperature grade, electrical limits, lead-free order codes, and exposed-pad requirements. Confirm both production status and traceability requirements before releasing a design that currently uses LT1638IDD.
What is the best Analog Devices equivalent for LT1638IDD?
The best confirmed Analog Devices equivalent is LT1638IDD#PBF because it is the lead-free orderable designation associated with the LT1638IDD and retains the 8-DFN package. The same-family LT1638CDD may also fit mechanically, but the manufacturer ordering table must confirm its grade and suffix. For a true drop-in decision, compare every exposed-pad and terminal function as well as the principal gain, slew, offset, and supply specifications.
When should I choose LT1638IDD over a general-purpose dual op amp?
Choose the LT1638IDD when a compact dual amplifier with rail-to-rail input and output, over-the-top input capability, and a 1.2 MHz gain-bandwidth product is required. Its 3 mm × 3 mm DFN package is useful where board area is constrained. A general-purpose amplifier may be preferable when its noise, offset, accuracy, supply range, or exact pinout better matches the design, because the LT1638IDD is optimized for micropower, moderate-bandwidth signal conditioning.
Is LT1638IDD suitable for portable sensor and low-power signal conditioning?
The LT1638IDD is suitable for portable sensor interfaces because it combines two amplifier channels, rail-to-rail input and output operation, over-the-top input capability, and a micropower-oriented design in a small 8-DFN package. Its 1.2 MHz bandwidth is appropriate for many sensor-conditioning stages but not for demanding high-frequency signals. Verify input bias current, offset, noise, and quiescent current against the complete electrical-characteristics table.
LT1638IDD vs LT1639: which should be selected?
Select LT1638IDD for a design requiring two amplifier channels, while LT1639 is the four-channel member of the same family and uses a larger 14-pin package. The LT1638IDD offers a smaller footprint for dual-channel signal conditioning, whereas LT1639 may simplify a four-channel board and reduce the number of amplifier packages. Confirm the exact pinout, package dimensions, and exposed-pad arrangement for the chosen ordering code.
What design constraints matter when using the 1.2 MHz LT1638IDD?
The LT1638IDD should be treated as a 1.2 MHz gain-bandwidth, 0.4 V/µs slew-rate amplifier. Closed-loop bandwidth depends on noise gain, while large-signal output changes can become slew-rate limited. Rail-to-rail behavior simplifies signal swing planning but does not guarantee unlimited output current or precise behavior near the rails. Use the manufacturer electrical-characteristics and typical-performance data to set gain, output amplitude, load, supply, and stability limits.

工程参考数据: LT1638IDD ——对比、设计指导和合规信息。

选型指南

Choose the LT1638IDD when the design needs two low-power amplifier channels, rail-to-rail input and output behavior, over-the-top input capability, and a compact 3 mm × 3 mm surface-mount package. It is a strong fit for portable sensor interfaces, low-level filtering, current-sense amplification, and moderate-bandwidth control loops where a 1.2 MHz gain-bandwidth product and 0.4 V/µs slew rate are sufficient. Select LT1638IDD#PBF when the procurement specification requires the explicit lead-free orderable code. Consider LT1638CDD only after confirming its temperature grade and electrical limits in the manufacturer ordering table. Choose the four-channel LT1639 instead when four signals must be handled and a larger 14-pin package is acceptable. For high-speed, very-low-noise, high-accuracy, or precision-reference applications, use a device whose dedicated electrical characteristics better match those requirements rather than selecting the LT1638IDD solely for its rail-to-rail capability.

与替代料对比

参数 本产品 LT1638IDD#PBF LT1638CDD
Brand Analog Devices Analog Devices Analog Devices
Package 8-DFN (3 mm × 3 mm) 8-DFN (3 mm × 3 mm) 8-DFN (3 mm × 3 mm)
Amplifier Configuration Dual operational amplifier Dual operational amplifier Dual operational amplifier
Ordering Qualification LT1638IDD base designation Lead-free orderable designation Same-family temperature-grade designation

关键差异点

  • Combines two amplifier channels in a 3 mm × 3 mm DFN (对比 LT1639)
  • Over-the-top input capability (对比 General-purpose rail-to-rail dual op amps)
  • Direct lead-free orderable designation (对比 LT1638IDD)

设计说明

Use the Analog Devices LT1638/LT1639 datasheet pin-description table and exposed-pad instructions as the authoritative layout references. Keep the two amplifier channels and their feedback networks compact, place input traces away from switching nodes, and route sensitive input connections over a continuous ground plane. The DFN exposed pad must be connected according to the manufacturer package recommendation; do not infer its electrical function from generic DFN examples.

Do not equate the 1.2 MHz gain-bandwidth product with 1.2 MHz usable closed-loop bandwidth at every gain. Closed-loop bandwidth is reduced by noise gain, and large output transitions may be limited by the 0.4 V/µs slew rate. Check settling time, minimum stable gain, output load, input common-mode range, and output swing in the electrical-characteristics and typical-performance sections before selecting the gain.

Estimate total supply dissipation from the actual output voltage, output current, supply voltage, and amplifier quiescent current before committing to the compact DFN layout. The calculated dissipation is approximately the sum of each amplifier's output-current contribution multiplied by its supply-to-output voltage difference, plus quiescent dissipation. Compare that estimate with the package thermal limits and exposed-pad copper area; add thermal copper where the calculated loss is substantial.

Keep feedback components close to the relevant amplifier inputs and outputs to minimize parasitic capacitance and feedback-loop delay. Place input-referenced bypass capacitance near the supply pins and preserve a low-impedance return for output currents. When driving a capacitive load, verify stability from the manufacturer data rather than adding arbitrary series resistance that could degrade output-current accuracy or increase output-voltage offset.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The LT1638IDD#PBF ordering suffix identifies a lead-free orderable configuration, but formal RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification statements are not confirmed in the cited product summaries. Verify these declarations against the current Analog Devices product documentation and quality declarations.

相关搜索

LT1638IDD datasheet LT1638IDD pinout LT1638IDD datasheet pdf LT1638IDD specifications LT1638IDD equivalent LT1638IDD replacement LT1638IDD cross reference LT1638IDD footprint LT1638IDD price Analog Devices LT1638IDD LT1638IDD vs LT1639 LT1638IDD 1.2MHz op amp LT1638IDD DFN application circuit LT1638IDD rail to rail op amp

相关元器件 & 术语

Analog Devices Linear Technology LT1638IDD LT1638IDD#PBF LT1638CDD LT1639 operational amplifier dual op amp rail-to-rail input rail-to-rail output over-the-top input gain-bandwidth product slew rate micropower amplifier 8-DFN DFN package dual fine-pitch leadless package surface-mount package signal conditioning current-sense amplification active filtering portable instrumentation 2.5 V to 44 V supply range
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情