M2GL050-1VF400 - 56,340-Cell IGLOO2 FPGA | Microchip
MPN: M2GL050-1VF400 ✗ Cuối đờiM2GL050-1VF400 Tóm tắt
An FPGA is a semiconductor whose digital behavior is defined after manufacture through a configuration bitstream. Unlike a fixed-function application-specific integrated circuit, an FPGA can implement parallel processing, interface conversion, protocol bridging, control logic, and hardware acceleration in one device. The M2GL050 family is positioned for general-purpose functions such as I/O expansion, system management, secure connectivity, bridging, and industrial communications.
The M2GL050-1VF400 is specified at 56,340 logic cells and 207 I/O in a 400-LFBGA package. Its 400-ball fine-pitch package supports dense board integration but requires careful land-pattern, escape-routing, and assembly planning. The product designation includes a 1.2 V operating class and a -1 speed-grade suffix, while the exact I/O, power, memory, and timing limits should be confirmed against the manufacturer's IGLOO 2 FPGA datasheet and pin-information user guide before schematic capture or PCB release.
The IGLOO 2 architecture integrates programmable logic with embedded memory and on-chip flash. Microchip identifies these flash FPGAs as useful for general-purpose logic, I/O expansion, conversion, system management, and secure connectivity. A design can therefore consolidate functions that would otherwise require multiple programmable or discrete devices, provided the required interfaces, timing, and I/O standards are supported by the selected package and speed grade.
Typical applications include industrial control, communications infrastructure, sensor and signal conditioning, embedded security bridges, test equipment, and low-power embedded control. The device is especially relevant to brownfield maintenance because an existing M2GL050-based board can be supported without changing its established IGLOO 2 architecture. New designs should evaluate M2GL060 as the manufacturer-recommended migration path.
For a new PCB, start with the manufacturer's VF400 package drawing, land pattern, and power-decoupling guidance rather than deriving the footprint from the 400-ball count. Confirm that every power, ground, configuration, clock, and user I/O connection is assigned according to the pin-information guide before fabrication.
This product page combines the device identity, lifecycle position, manufacturer resources, package constraints, verified replacement candidates, and application guidance into an engineering-oriented overview for maintenance, migration, and second-source decisions.
Bộ thay thế dễ dàng lắp đặt cho M2GL050-1VF400 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với M2GL050-1VF400 (cùng hình factor và footprint) — khác nhau ở Package, Device Type, Logic Elements, FPGA Family, Device Series.
M2GL050-1VFG400
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
M2GL050-VF400I
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →M2GL050-VFG400
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →M2GL060-1VF400
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →M2GL060-VF400I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →M2GL050-1VF400 Tỷ lệ tối đa & tính chất điện
| FPGA Family | IGLOO2 |
| Logic Cells | 56,340 cells |
| I/O Count | 207 I/O |
| Hộp | 400-LFBGA |
| Core Voltage Class | 1.2 V |
| Speed Grade | -1 |
| Device Type | Low-density flash FPGA |
| On-Chip Flash | Present |
| Khoảng nhiệt độ hoạt động | 0 C to 85 C |
| Kiểu lắp đặt | Surface mount |
| Packaging Type | Tray |
| Trạng thái vòng đời | Not recommended for new design |
| Recommended New-Design Family | M2GL060 |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
Hướng dẫn cấu hình chân M2GL050-1VF400 400-lfbga
Cấu hình chân cho M2GL050-1VF400 (400-lfbga gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho M2GL050-1VF400.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
M2GL050-1VF400 phù hợp cho 6 Áp dụngs: Industrial Control and Automation, Communications Protocol Conversion, Sensor Acquisition and Signal Conditioning, Secure Connectivity and Authentication, Test and Measurement Equipment, I/O Expansion and Interface Bridging.
Industrial Control and Automation
The M2GL050-1VF400 is appropriate for industrial controllers that combine parallel control, communication conversion, and system-management logic in one programmable device. Its 56,340 logic cells provide a defined logic budget, while 207 I/O support connections among sensors, actuators, field buses, and supervisory controllers. The device is particularly useful when redesigning an established IGLOO2 platform because engineers can retain the 400-LFBGA board architecture. Because the exact part is not recommended for new designs, teams should use it for maintenance or qualification of mature platforms. New programs should evaluate M2GL060 and repeat timing, resource, power, and I/O validation before transferring the design.
Được đề xuất
Communications Protocol Conversion
The IGLOO2 M2GL050-1VF400 can implement protocol bridges, serial-to-parallel converters, framing logic, and buffering when a communications product needs configurable logic rather than a fixed protocol controller. Its 207 I/O provide a substantial interface budget, while 56,340 logic cells allow multiple clock domains, data packing, and supervisory functions to be consolidated. The 400-LFBGA package can shorten board interconnect by placing the FPGA close to high-speed components, although it demands careful escape routing. Engineers should assign pins from the official pin-description guide, verify I/O-standard support, and check timing against the selected -1 speed grade. For new communication platforms, compare the recommended M2GL060 family for additional design margin.
Được đề xuất
Sensor Acquisition and Signal Conditioning
The M2GL050-1VF400 can host parallel sensor acquisition, digital filtering, calibration tables, threshold detection, and data-packet preparation in a single FPGA. Its 56,340-cell capacity and 207 I/O are useful when many sensors require deterministic digital preprocessing before data reaches a microcontroller or communications controller. On-chip flash permits self-contained configuration in unattended equipment, while programmable logic allows filtering logic to be updated for different sensor families. The 0 C to 85 C listed operating range can support many indoor industrial environments, but system-level thermal and EMC requirements still apply. Use the manufacturer pin guide to check dedicated configuration and clock pins, and validate acquisition timing with realistic sensor and clock margins.
Được đề xuất
Secure Connectivity and Authentication
Microchip identifies secure connectivity and general-purpose programmable functions as suitable uses for the IGLOO2 family, and the M2GL050-1VF400 can implement protocol-aware logic, key-handling routines, packet filters, and hardware security monitors. The 56,340 logic cells support parallel cryptographic or authentication pipelines when they fit the device resource limits, while 207 I/O can connect programmable logic to secure elements and external interfaces. The 400-LFBGA package limits board area but requires escape routing and careful power planning around high-speed or sensitive circuitry. Security claims must follow the system threat model and applicable certification requirements rather than relying on FPGA status alone. Validate the final configuration bitstream, key-storage method, update path, and fault-response behavior.
Được đề xuất
Test and Measurement Equipment
A programmable FPGA is useful in test equipment for sequencing, pattern generation, timing control, data capture, and instrumentation interfaces. The M2GL050-1VF400 offers 56,340 logic cells and 207 I/O for combining several fixed-function blocks into one compact controller, and its -1 speed designation supports deterministic designs once timing is closed against the appropriate device speed grade. The 400-LFBGA package helps preserve small board area but requires careful layer planning and thermal verification under instrument operating conditions. Engineers should use manufacturer timing constraints, account for configuration startup, and verify every I/O standard against the target board. For new test platforms, M2GL060 may provide additional capacity for wider channels, deeper capture, or more concurrent operations.
Được đề xuất
I/O Expansion and Interface Bridging
The M2GL050-1VF400 is a natural fit for I/O expansion when a system needs to consolidate mismatched legacy, serial, and parallel interfaces. With 56,340 logic cells and 207 I/O, the device can implement bus arbitration, level-compatible interface logic, frame assembly, and status monitoring while reducing discrete glue logic. Its 0 C to 85 C operating range covers many commercial and industrial indoor installations. The fine-pitch 400-LFBGA package reduces footprint but makes component placement and escape routing more demanding than a leaded package, so use the official mechanical drawing and pin-information guide. Verify differential-pair rules, supply requirements, configuration pins, and unused-ball treatment before layout release, and prefer M2GL060 for new products.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho M2GL050-1VF400 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | M2GL050-1VFG400 | M2GL050-VF400I | M2GL050-VFG400 | M2GL060-1VF400 | M2GL060-VF400I |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 400-LFBGA VF400 | 400-LFBGA VF400 | 400-LFBGA VF400 | 400-LFBGA VF400 | 400-LFBGA VF400 | 400-LFBGA VF400 |
| FPGA Family | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 | IGLOO2 |
| Core Voltage Class | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| New-Design Recommendation | Not recommended for new design | M2GL050 family; exact status requires confirmation | M2GL050 family; exact status requires confirmation | M2GL050 family; exact status requires confirmation | M2GL060 recommended successor family | M2GL060 recommended successor family |
| Configuration Memory | On-chip flash | On-chip flash | On-chip flash | On-chip flash | On-chip flash | On-chip flash |
Bảo phân biệt quan trọng
- Exact 56,340-cell density in the identified VF400 replacement (vsM2GL050-1VFG400)
- Same-family VF400 option with an industrial suffix (vsM2GL050-VF400I)
- Manufacturer-recommended migration family in the same package class (vsM2GL060-1VF400)
Ghi chú thiết kế
Use Microchip's VF400 package drawing and pin-information guide to create the land pattern, rather than constructing a 400-ball footprint from package dimensions alone. Place decoupling and configuration support components before routing the fine-pitch escape network. Confirm the ball assignment of every power and ground terminal, reserve any required configuration pins, and follow the manufacturer rules for unused balls. A completed footprint should be checked against the released PCB library and assembly drawing.
Separate core, I/O, and auxiliary supply requirements using the exact power pins and voltage limits in the IGLOO 2 datasheet. Place bulk and high-frequency decoupling at the associated supply balls, with the shortest possible return paths through the package power and ground structure. Do not assign supply nets by assumption from a generic FPGA symbol. Validate steady-state and startup current against the selected -1 speed grade, implemented logic, and operating temperature.
Do not treat an M2GL060 device as a transparent M2GL050 substitute even when both use the VF400 package class. Recheck resource utilization, timing constraints, I/O behavior, power sequencing, and configuration compatibility, then rerun synthesis, place-and-route, timing analysis, and board-level testing. For same-density M2GL050 orderable variants, confirm the exact grade suffix and qualification requirements against the customer specification before approving the substitution.
Plan the escape routing and layer-transition strategy around the 400-LFBGA geometry. Maintain continuous reference planes for sensitive interfaces, control return-current paths beneath high-speed nets, and avoid splits beneath the FPGA where possible. Treat configuration signals as critical paths and isolate noisy switching nodes from precision clock or sensitive communication lines. Review escape skew and simultaneous-switching-noise effects during implementation rather than after fabrication.
Thông tin tuân thủ
The manufacturer product page identifies the M2GL050 family as in production, while the exact M2GL050-1VF400 is identified as not recommended for new designs. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status were not confirmed.
