MAX20076ATCB - 36V, 1.2A Synchronous Buck Converter | Analog Devices
MPN: MAX20076ATCB ✓ Hoạt độngMAX20076ATCB Tóm tắt
A synchronous buck converter is a DC-DC voltage-regulator class that reduces a higher input voltage to a lower, regulated output. Unlike a linear regulator, its internal high-side and low-side MOSFET switches transfer energy through an inductor during alternating charge and discharge cycles. This switching action improves conversion efficiency, especially when the output voltage is substantially below the input voltage. The MAX20076 belongs to the synchronous buck-converter family within power-management ICs.
Key features include integrated high-side and low-side switches, programmable output voltage, 1.2 A output-current capability, operation from 3.5 V to 36 V, and a 2 MHz switching option identified in distributor data. The 3 mm x 3 mm TDFN package supports space-constrained designs, while the exposed pad provides a thermal and electrical connection to the PCB. The converter also uses very few external components according to the manufacturer datasheet.
The 20 ns minimum on-time is technically significant because it permits a high ratio between input and output voltages while retaining regulation. This helps designers use a smaller inductor than would be practical with a conventional buck controller that has a longer minimum pulse width. The integrated synchronous switches reduce external power-stage components and can improve conversion efficiency compared with a diode-based asynchronous implementation.
Typical applications include automotive electronics, industrial systems, portable equipment, and distributed power rails that require compact step-down conversion from a wide input range. For an automotive design, engineers should still verify the exact temperature grade, automotive qualification status, and electrical limits in the ordering information and manufacturer datasheet before production release.
The principal design consideration is component selection and PCB layout. Inductor saturation current, switching-node layout, input-capacitor placement, and exposed-pad thermal performance directly affect reliability and electromagnetic compatibility. Designers should follow the manufacturer’s recommended application circuit and layout guidance rather than estimating these values from generic buck-converter examples.
This product page consolidates verified manufacturer specifications, distributor availability references, package information, and practical design guidance. It distinguishes published facts from parameters that require confirmation from the full datasheet, helping engineers evaluate this wide-input, compact converter efficiently.
Bộ thay thế dễ dàng lắp đặt cho MAX20076ATCB — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX20076ATCB (cùng hình factor và footprint) — khác nhau ở Package, Switching Frequency.
MAX20076ATCB/V+
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX20076ATCB/V+T
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX20076ATCB Tỷ lệ tối đa & tính chất điện
| Product Type | Synchronous step-down buck converter |
| Phạm vi điện áp đầu vào | 3.5 V to 36 V |
| Điện áp tối đa đầu ra | 1.2 A |
| Output Accuracy | ±2% from 6 V to 18 V input |
| Minimum On-Time | 20 ns |
| Tần số chuyển đổi | 2 MHz |
| Integrated Switches | High-side and low-side |
| Kiểu đầu ra | Programmable |
| Hộp | 12-pin TDFN, 3 mm x 3 mm, exposed pad |
| Package Type | Side-wettable TDFN |
| External Components | Very few |
| Kiểu lắp đặt | Surface mount |
| Application | Automotive electronics |
| Production Status | Production |
| Manufacturer Revision | Data Sheet Rev. 12 |
Hướng dẫn cấu hình chân MAX20076ATCB side-wettable tdfn
Cấu hình chân cho MAX20076ATCB (side-wettable tdfn gói). Động cơ điện này có chân cổng, nguồn và đầu ra. Đối với các gói không phân極, tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết hướng dẫn chính xác của chân 1 và chi tiết về vân footprint. Các ứng dụng phổ biến bao gồm thiết kế nguồn cung cấp điện, điều khiển động cơ và chuyển đổi tải.
Không có dữ liệu chân cụ thể sẵn có cho MAX20076ATCB.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MAX20076ATCB phù hợp cho 6 Áp dụngs: Automotive Electrical-Control Rails, Industrial Sensor and Controller Power, Portable and Battery-Derived Systems, Distributed Power for Communication Equipment, High-Density Robotics Power Modules, Test and Measurement Front-Ends.
Automotive Electrical-Control Rails
The MAX20076ATCB fits compact automotive control units that need to reduce a wide input rail to a lower regulated supply. Its 3.5 V to 36 V input range accommodates broad vehicle battery-conditioning environments, while the 1.2 A capability supports moderate sensor, interface, and actuator-control loads. The synchronous switch arrangement avoids a discrete rectifier diode and can improve conversion efficiency. Designers should use the exposed-pad land pattern, place input and output capacitors close to the pins, and verify transient, temperature, and automotive qualification requirements against the final vehicle specification.
Được đề xuất
Industrial Sensor and Controller Power
The MAX20076ATCB is appropriate for industrial sensor nodes and embedded controllers that receive a higher-voltage distribution rail and require a compact local regulator. The 20 ns minimum on-time supports high step-down ratios, helping designers reduce inductor size when converting a wide input to a lower rail. Its 1.2 A rating provides headroom for processor, sensor, and interface loads, but actual current must remain within thermal and inductor limits. Ground-plane continuity and exposed-pad thermal management are especially important in compact industrial enclosures with limited airflow.
Được đề xuất
Portable and Battery-Derived Systems
The MAX20076ATCB can serve as a compact step-down stage in portable equipment, battery-powered modules, and edge devices where a higher raw input must be reduced efficiently. Synchronous conversion avoids the inherent conduction loss associated with a series rectifier, and the 3 mm x 3 mm package helps conserve board area. The 36 V maximum input is useful for protected industrial or automotive-derived inputs, although it is not a substitute for a battery-specific charger. Designers must account for startup behavior, load transients, inductor current, and the regulator’s thermal rise in enclosed products.
Được đề xuất
Distributed Power for Communication Equipment
The MAX20076ATCB is useful in distributed communication equipment where a 12 V or higher input rail is reduced locally for processors, transceivers, and logic. The 2 MHz switching-class device identified in distributor data supports a compact power solution, while the 20 ns minimum on-time allows substantial step-down ratios. A synchronous regulator is advantageous when efficiency matters more than the simplicity of a linear output. EMI control still depends on the selected inductor, switching-node geometry, input filtering, and the exact layout recommended by Analog Devices.
Được đề xuất
High-Density Robotics Power Modules
The MAX20076ATCB can provide a compact local supply for robot controllers, motor-interface electronics, and sensor distribution modules. Its small TDFN footprint leaves more board area for signal routing, while the wide input range supports protected industrial or vehicle-derived power buses. The 1.2 A rating is appropriate for moderate digital loads, but motor transients should be isolated or regulated upstream rather than assumed to be absorbed by the buck converter. Pay attention to exposed-pad soldering, thermal vias, and the maximum voltage transient seen by the IC.
Được đề xuất
Test and Measurement Front-Ends
The MAX20076ATCB can generate a compact regulated rail for measurement and instrumentation boards that combine analog front ends with digital control. The wide 3.5 V to 36 V input range simplifies designs that receive protected laboratory or industrial supplies. Its synchronous operation reduces the number of external power-stage components compared with an asynchronous diode implementation. For precision measurement, assess noise, ripple, grounding, and transient performance experimentally rather than relying only on nominal converter specifications. Place the feedback and compensation components exactly as shown in the manufacturer reference design.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX20076ATCB — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX20076ATCB/V+ | MAX20076ATCB/V+T |
|---|---|---|---|
| Package | 12-pin TDFN, 3 mm x 3 mm, exposed pad | 12-pin TDFN, 3 mm x 3 mm | 12-pin TDFN, 3 mm x 3 mm |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Input Voltage Range | 3.5 V to 36 V | 3.5 V to 36 V | 3.5 V to 36 V |
| Maximum Output Current | 1.2 A | 1.2 A | 1.2 A |
| Converter Type | Synchronous buck converter | Synchronous buck converter | Synchronous buck converter |
| Minimum On-Time | 20 ns | 20 ns | 20 ns |
| Output Accuracy | ±2% from 6 V to 18 V input | ±2% from 6 V to 18 V input | ±2% from 6 V to 18 V input |
| Switching Frequency | 2 MHz | 2 MHz | 2 MHz |
| Integrated Switches | High-side and low-side | High-side and low-side | High-side and low-side |
Bảo phân biệt quan trọng
- Higher output-current capability than the related MAX20075 device (vsMAX20075)
- Wide 36 V input-class operation (vsMAX20076ATCB/V+)
- Compact exposed-pad package (vsMAX20076ATCB/V+T)
- High-ratio step-down capability (vsMAX20075)
Ghi chú thiết kế
Use the Analog Devices recommended 12-pin TDFN land pattern and keep the switching node as small as practical. Place the input capacitors, output capacitors, inductor, and feedback components according to the datasheet reference layout. The exposed pad should have a continuous thermal connection to the ground plane, with vias selected to preserve electrical performance and heat transfer.
Do not assume that the 1.2 A rating permits continuous 1.2 A operation without thermal analysis. Estimated dissipation should be calculated from VIN, VOUT, output current, conversion efficiency, and ambient temperature using the actual design values. Check junction temperature against the datasheet limit and provide copper area or thermal vias beneath the exposed pad.
The 20 ns minimum on-time enables high step-down ratios, but the inductor must still satisfy the required ripple current, saturation current, and switching-frequency limits. Do not select the inductor from its inductance value alone. Confirm the selected part’s current rating against the calculated peak current, including startup, load-transient, and tolerance effects.
The switching node is the principal EMI source. Keep VIN and SW copper areas compact, use a grounded return path, and place input bypass capacitors close to the IC pins. If conducted or radiated emissions exceed the system limit, evaluate switching-node snubber, input filtering, and shield or grounding changes rather than relying only on output filtering.
Do not treat the MAX20075 as a drop-in replacement for the MAX20076ATCB: the MAX20075 is documented up to 0.6 A, while the MAX20076ATCB is designed up to 1.2 A. Also verify the exact ordering suffix and package before placement, because the supplied distributor data identifies both /V+ and /V+T ordering forms.
Thông tin tuân thủ
The supplied verified data identifies automotive applications but does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements. Compliance must be confirmed using the current manufacturer product documentation and ordering information.
