MAX211IDBRG4 - 5V 120kbps RS-232 Transceiver | TI
MPN: MAX211IDBRG4 ✓ Hoạt độngMAX211IDBRG4 Tóm tắt
An RS-232 transceiver is an interface IC that converts logic-level UART signals into RS-232 differential voltage levels and converts received RS-232 signals back into logic-compatible levels. This signal-conditioning layer sits between a serial communication controller and an external connector. The MAX211 belongs to the broader RS-232 interface, transceiver, interface IC, and semiconductor hierarchy. Its integrated dual charge pump generates the positive and negative voltage levels required by RS-232 while allowing operation from a single 5V supply.
The device includes four RS-232 drivers, five RS-232 receivers, and pin-to-pin ESD protection rated at ±15 kV using the human-body model. It operates at up to 120 kbit/s and meets the requirements of TIA/EIA-232-F and ITU V.28, as identified in the manufacturer datasheet. An enable control supports low-power shutdown, while the low shutdown supply current helps suit equipment where the serial interface is not continuously active.
The dual charge-pump architecture is a key technical feature. Four small external capacitors support the charge-pump circuit, allowing the interface to produce the bipolar voltage swings needed for RS-232 communication. The four-driver and five-receiver arrangement supports applications requiring more receive channels than transmit channels, while the shared 5V supply simplifies interface implementation in industrial-control, test, and embedded systems.
Typical uses include multi-channel RS-232 port expansion, industrial data acquisition, service and configuration interfaces, legacy peripheral connectivity, and embedded control systems that retain a serial console. The industrial temperature range of −40°C to +85°C supports use across commercial and industrial environments where temperature variation is expected.
PCB design should preserve short charge-pump capacitor connections and provide adequate input and output return paths for every RS-232 channel. Place ESD-protection and signal-routing structures near the connector when the external cable creates a direct electrostatic-discharge path. Confirm signal polarity, receiver direction, enable state, and connector mapping before releasing a new layout.
This page combines the manufacturer’s electrical specifications, verified drop-in replacement information, application guidance, package details, and practical layout considerations to accelerate component selection and PCB implementation.
Bộ thay thế dễ dàng lắp đặt cho MAX211IDBRG4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX211IDBRG4 (cùng hình factor và footprint) — khác nhau ở Number of Drivers, Number of Receivers, Product Type, ITU Standard, Operating Temperature Range.
MAX213EEAI+
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX211IDBRG4 Thông số kỹ thuật
| Product Type | RS-232 line driver and receiver |
| Điện áp cung cấp | 5 V |
| Maximum Data Rate | 120 kbit/s |
| Number of Drivers | 4 |
| Number of Receivers | 5 |
| Driver Output Voltage | ±9 V |
| ESD Protection | ±15 kV using the Human-Body Model |
| Khoảng nhiệt độ hoạt động | −40°C to +85°C |
| Hộp | 28-pin SSOP |
| Kiểu lắp đặt | Surface mount |
| Interface Standard | TIA/EIA-232-F |
| ITU Standard | ITU V.28 |
| Charge-Pump Capacitors Required | 4 external capacitors |
| Shutdown Supply Current | 1 µA typical |
| Temperature Grade | Industrial |
| Terminal Count | 28 terminals |
Hướng dẫn cấu hình chân MAX211IDBRG4 28-pin ssop
Cấu hình chân cho MAX211IDBRG4 (28-pin ssop gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho MAX211IDBRG4.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MAX211IDBRG4 phù hợp cho 6 Áp dụngs: Industrial RS-232 Port Expansion, Legacy Peripheral Connectivity, Data Acquisition and Control, Service and Configuration Port, Embedded Serial Console, Instrumentation and Test Equipment.
Industrial RS-232 Port Expansion
The MAX211IDBRG4 is appropriate for expanding a legacy asynchronous serial interface because it combines four drivers and five receivers with operation from a single 5 V supply. A controller can use the four transmitter channels for commands and configuration outputs while the five receiver channels monitor status, acknowledgments, or sensor data. Operation up to 120 kbit/s supports conventional industrial serial links. The −40°C to +85°C range also suits equipment operating across typical industrial temperature ranges, although system-level EMC and grounding remain important.
Được đề xuất
Legacy Peripheral Connectivity
The MAX211IDBRG4 provides the electrical interface required when a modern controller must communicate with a legacy RS-232 peripheral. Four drivers permit simultaneous command outputs, while five receivers allow multiple feedback or acknowledgment signals to be monitored. Its 120 kbit/s maximum data rate is appropriate for many legacy asynchronous peripherals. The integrated charge pump reduces the external support circuitry to four small capacitors, making the device suitable for compact industrial-control, instrument, and service-interface boards.
Được đề xuất
Data Acquisition and Control
The four-driver, five-receiver configuration in the MAX211IDBRG4 fits acquisition systems that send commands while receiving measurements or equipment status. The interface can bridge a UART-capable controller to external sensors, programmable instruments, or remote I/O modules over RS-232. A maximum rate of 120 kbit/s accommodates many supervisory and configuration links, while the 5 V supply and four external charge-pump capacitors simplify integration near the logic circuitry.
Được đề xuất
Service and Configuration Port
The MAX211IDBRG4 can implement a multi-signal service interface for equipment that requires more control or monitoring channels than a basic RS-232 port provides. Four transmit outputs and five receive inputs support commands, status flags, diagnostic outputs, and acknowledgments without requiring a separate transceiver for every direction. Its industrial temperature range supports use in deployed equipment, and the ±15 kV human-body-model ESD rating adds protection on exposed serial-port connection pins.
Được đề xuất
Embedded Serial Console
The MAX211IDBRG4 is suitable for an embedded system that must retain a wired RS-232 console alongside modern communications interfaces. The single 5 V operation aligns with conventional embedded logic supplies, and the integrated dual charge pump avoids a separate bipolar supply generator. The 28-pin SSOP places four drivers and five receivers in a compact surface-mount footprint. At 120 kbit/s, the device supports console traffic and other supervisory serial channels, subject to the connected equipment’s electrical and protocol requirements.
Được đề xuất
Instrumentation and Test Equipment
The MAX211IDBRG4 can connect an instrument controller to external RS-232 test equipment through several channels. Its five receivers are useful for acquiring ready, pass, fail, measurement, and remote-trigger signals, while four drivers can operate test stimuli or control devices. The device supports up to 120 kbit/s and operates across −40°C to +85°C. In instrument chassis applications, pair the interface with a suitable connector and chassis-ground strategy to maintain predictable ESD and signal-integrity behavior.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX211IDBRG4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX213EEAI+ |
|---|---|---|
| Package | 28-pin SSOP | 28-pin SSOP |
| Brand | Texas Instruments | Maxim Integrated |
| Device Type | Multichannel RS-232 line driver/receiver | Multichannel RS-232 line driver/receiver |
| Supply Voltage | 5 V | 5 V |
| Maximum Data Rate | 120 kbit/s | 120 kbit/s |
| Number of Drivers | 4 | 4 |
| Number of Receivers | 5 | 5 |
Bảo phân biệt quan trọng
- Matched four-driver and five-receiver configuration (vsMAX213EEAI+)
- Single 5 V operating supply (vsMAX213EEAI+)
- Connector-side ESD protection (vsMAX213EEAI+)
Ghi chú thiết kế
Place the four charge-pump capacitors close to their designated MAX211 pins and keep each capacitor connection short. These components carry repetitive charge-transfer current, so long loops can increase radiated emissions and susceptibility to noise. Route the charge-pump section away from sensitive receiver inputs and follow the manufacturer layout example. Use a continuous ground plane where practical, and connect the exposed environment through a controlled chassis and signal-ground strategy.
Assign every RS-232 driver output and receiver input according to the pin-description table in the manufacturer datasheet. Keep connector-side traces short, provide a nearby chassis entry point where applicable, and avoid routing sensitive receiver inputs beneath digital clocks or switching nodes. The five receiver channels should have independent return paths to minimize common-impedance coupling. Validate the final connector pinout, signal polarity, and multidrop restrictions before fabrication.
Do not treat the ±15 kV human-body-model ESD rating as protection for every installation method. The rating applies to the specified device pins and test model, not the complete connector or enclosure. External protection may still be needed for long field cables, outdoor equipment, or severe industrial environments. Also verify the enable state, charge-pump capacitor values, and external capacitor type and voltage rating against the manufacturer guidance before production release.
Thông tin tuân thủ
The MAX211 family is identified as an industrial-temperature RS-232 interface meeting TIA/EIA-232-F and ITU V.28. Specific material-compliance declarations are not stated and therefore remain unknown.