MAX232ECSE+ - 2/2 RS-232 Transceiver, 15kV ESD | Analog Devices
MPN: MAX232ECSE+ ✓ Hoạt độngMAX232ECSE+ Tóm tắt
Bộ thay thế dễ dàng lắp đặt cho MAX232ECSE+ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX232ECSE+ (cùng hình factor và footprint) — khác nhau ở Interface Standard, Package, Supply Voltage Range, Operating Temperature, Product Type.
MAX232ESE+
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3232ESE+TG035
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3232CSE+
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3222ESE
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX3232CDBR
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX232ECSE+ Thông số kỹ thuật
| Product Type | RS-232 transceiver |
| Driver and Receiver Configuration | 2 drivers / 2 receivers |
| Tốc độ dữ liệu | 120 kbps |
| Điện áp cung cấp | +5 V |
| Interface Standard | RS-232 and V.28 |
| ESD Protection | ±15 kV HBM |
| Charge Pump | Integrated |
| External Supply Requirement | No external ±10 V supply required |
| Logic Level Compatibility | TTL/CMOS |
| Hộp | 16-SOIC (NSOIC) |
| Kiểu lắp đặt | Surface mount |
| Nhiệt độ hoạt động | Extended temperature option; exact range in ordering information |
| Số lượng chân | 16 pins |
| Compliance Status | RoHS and REACH status; exact declarations require manufacturer confirmation |
| Automotive Qualification | Not specified as AEC-Q100 qualified |
Cấu hình chân MAX232ECSE+
| Chân 1 | R1OUT — Receiver 1 output, TTL/CMOS logic level |
| Chân 2 | R2OUT — Receiver 2 output, TTL/CMOS logic level |
| Chân 3 | R2IN — Receiver 2 input, RS-232 signal input |
| Chân 4 | R1IN — Receiver 1 input, RS-232 signal input |
| Chân 5 | V- — Negative charge-pump output for RS-232 signal generation |
| Chân 6 | R3OUT — Receiver 3 output for unused channel |
| Chân 7 | R3IN — Receiver 3 input for unused channel |
| Chân 8 | R4IN — Receiver 4 input for unused channel |
| Chân 9 | R4OUT — Receiver 4 output for unused channel |
| Chân 10 | T3IN — Driver 3 input for unused channel |
| Chân 11 | T2OUT — Driver 2 RS-232 output |
| Chân 12 | T1OUT — Driver 1 RS-232 output |
| Chân 13 | T2IN — Driver 2 TTL/CMOS input |
| Chân 14 | T1IN — Driver 1 TTL/CMOS input |
| Chân 15 | VCC — Positive +5 V supply input |
| Chân 16 | V+ — Positive charge-pump output for RS-232 signal generation |
Ứng dụng tiêu biểu
MAX232ECSE+ phù hợp cho 6 Áp dụngs: Industrial Control Serial Port, Data Acquisition Equipment, RS-232 to TTL Serial Adapter, POS Terminal and Retail Equipment, Instrumentation and Test Equipment, Embedded Service and Configuration Port.
Industrial Control Serial Port
The MAX232ECSE+ is well suited to an RS-232 service or configuration port on an industrial controller because it combines two drivers, two receivers, and an integrated charge pump in one 16-SOIC device. A single +5 V rail generates the required bipolar line levels without adding a negative-supply circuit. The 120 kbps maximum data rate supports legacy controller programming protocols and asynchronous data links commonly running at 9600 to 115200 bps. Its ±15 kV HBM ESD protection is valuable when the connector is exposed to operator contact, although a production design should still evaluate external surge and cable protection for long field wiring.
Được đề xuất
Data Acquisition Equipment
The MAX232ECSE+ can bridge a laboratory instrument, data logger, or acquisition unit to a host computer through an RS-232 connection. Its two drivers and two receivers are sufficient for one full-duplex port, while the +5 V single-supply operation simplifies portable and bench-top instrumentation. The 120 kbps capability covers most legacy acquisition-control traffic without becoming the limiting factor in a typical laboratory environment. The extended-temperature ordering option should be checked against the enclosure temperature, and unused receiver inputs must be tied to a valid logic state.
Được đề xuất
RS-232 to TTL Serial Adapter
The MAX232ECSE+ is a natural choice for a compact RS-232-to-TTL adapter because its drivers and receivers perform both directions of level translation. The integrated charge pump eliminates the external dual-polarity supply normally associated with RS-232 interfaces, and the 16-SOIC package keeps the footprint practical for small adapter boards. At rates up to 120 kbps, it supports legacy serial equipment and microcontroller console links. Place the charge-pump capacitors and interface-side protection close to the device, and route the connector through the layout guidance in the manufacturer datasheet.
Được đề xuất
POS Terminal and Retail Equipment
The MAX232ECSE+ can interface point-of-sale terminals, receipt printers, scales, or service equipment that use legacy RS-232 links. Its 2/2 arrangement supports bidirectional communication with a single transceiver, and the single +5 V supply operation reduces the power-supply burden in compact countertop systems. The device's ±15 kV HBM protection improves tolerance of electrostatic discharge during routine connector handling. For cables leaving the equipment enclosure, evaluate an external network and grounding strategy because device-level ESD protection is not a substitute for cable shielding and chassis bonding.
Được đề xuất
Instrumentation and Test Equipment
The MAX232ECSE+ supports legacy test and measurement equipment that exposes a service port for calibration, diagnostics, or automated setup. The integrated charge pump keeps the power tree simple, while the 120 kbps rate is appropriate for command-oriented serial consoles and low-volume instrument data. The 16-SOIC package allows the interface to be placed near the connector while keeping the digital control section on the opposite side of the board. Confirm the exact temperature grade and use the manufacturer pin table before implementing loopback or tying a receiver input to a driver output.
Được đề xuất
Embedded Service and Configuration Port
The MAX232ECSE+ is useful for embedded systems that need a manufacturing, configuration, or firmware-recovery port alongside a modern communications interface. The +5 V supply requirement fits many mixed-signal and processor boards, and the integrated charge pump eliminates a separate negative rail. Its 2/2 channel count allows transmit and receive connections on one point-to-point port, while its 120 kbps rating is more than adequate for short configuration sessions. Keep the RS-232 connector away from high-speed digital routing and follow the datasheet layout for charge-pump and interface connections.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX232ECSE+ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX232ESE | MAX3232ESE | MAX3232CSE | MAX3222ESE | MAX3232CDBR |
|---|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Driver / Receiver Count | 2 drivers / 2 receivers | 2 drivers / 2 receivers | 4 drivers / 4 receivers | 4 drivers / 4 receivers | 2 drivers / 2 receivers | 4 drivers / 4 receivers |
| Supply Voltage | +5 V | +5 V | +5 V | +5 V | +5 V | +5 V |
| Charge Pump | Integrated | Integrated | Integrated | Integrated | Integrated | Integrated |
| Interface Standard | RS-232 and V.28 | RS-232 and V.28 | RS-232 | RS-232 | RS-232 | RS-232 |
| Temperature Grade | Extended-temperature CS ordering option | Confirm specific ordering code | Extended-temperature E ordering option | Extended-temperature CS ordering option | Extended-temperature E ordering option | Commercial-temperature C ordering option |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
Bảo phân biệt quan trọng
- Exact 2/2 channel match within the MAX232E family (vsMAX232ESE)
- Higher port density on the same 16-SOIC footprint (vsMAX3232ESE)
- Dedicated shutdown-capable alternative for power-sensitive interfaces (vsMAX3222ESE)
- Broader temperature availability than the commercial-grade option (vsMAX3232CDBR)
Ghi chú thiết kế
Place the charge-pump capacitors close to their corresponding V+ and V- pins, and route the RS-232 driver outputs directly toward the connector. Keep the TTL/CMOS inputs and receiver outputs away from the connector and charge-pump nodes to limit capacitive coupling and switching noise. Follow the manufacturer layout example for the MAX232E family rather than substituting a generic RS-232 footprint with different capacitor placement.
Do not assume that a 16-pin SOIC transceiver is automatically interchangeable with the MAX232ECSE+. MAX232E provides two drivers and two receivers, whereas the MAX3232 and MAX3222 alternatives provide different channel counts and feature sets. Check each unused input, power pin, and charge-pump connection against the relevant datasheet before releasing a substitute into production.
For an external RS-232 connector, combine the device's ±15 kV HBM ESD protection with a connector placement that minimizes exposed trace length. Ground the connector shell according to the equipment's chassis and ESD strategy, and evaluate a series termination or external protection network for long or industrial cables. The on-chip ESD rating should not be treated as the complete electromagnetic or surge-protection solution.
Decouple the +5 V supply locally at the VCC pin and keep the return path short. The MAX232E family includes a charge pump, so its switching current is drawn from the same rail that powers the digital interface. Provide adequate supply margin and check the datasheet's supply-current and charge-pump characteristics against the board's load transients before finalizing the power tree.
Thông tin tuân thủ
The manufacturer product page and distributor listings identify the MAX232E family and its RS-232 interface characteristics. Exact RoHS, REACH, halogen-free, and conflict-minerals declarations should be confirmed from the current manufacturer compliance documentation for the selected ordering code.