MAX232ECSE+ - 2/2 RS-232 Transceiver, 15kV ESD | Analog Devices
MPN: MAX232ECSE+ ✓ 啟用中MAX232ECSE+ 概覽
直接替換替代品,適用於 MAX232ECSE+ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX232ECSE+ (相同外形與佔位) — 差異在於 Interface Standard, Package, Supply Voltage Range, Operating Temperature, Product Type.
MAX232ESE+
✅ 直接替換聯絡詢價
查看資料表 →MAX3232ESE+TG035
✅ 直接替換聯絡詢價
查看資料表 →MAX3232CSE+
✅ 直接替換聯絡詢價
查看資料表 →MAX3222ESE
✅ 直接替換📋 參考替代品(不在目錄中)
MAX3232CDBR
✅ 直接替換聯絡詢價
查看資料表 →MAX232ECSE+ 規格
| Product Type | RS-232 transceiver |
| Driver and Receiver Configuration | 2 drivers / 2 receivers |
| 資料速率 | 120 kbps |
| 供應電壓 | +5 V |
| Interface Standard | RS-232 and V.28 |
| ESD Protection | ±15 kV HBM |
| Charge Pump | Integrated |
| External Supply Requirement | No external ±10 V supply required |
| Logic Level Compatibility | TTL/CMOS |
| 封裝 | 16-SOIC (NSOIC) |
| 安裝類型 | Surface mount |
| 工作溫度 | Extended temperature option; exact range in ordering information |
| 腳位數 | 16 pins |
| Compliance Status | RoHS and REACH status; exact declarations require manufacturer confirmation |
| Automotive Qualification | Not specified as AEC-Q100 qualified |
MAX232ECSE+ 腳位配置
| 腳位 1 | R1OUT — Receiver 1 output, TTL/CMOS logic level |
| 腳位 2 | R2OUT — Receiver 2 output, TTL/CMOS logic level |
| 腳位 3 | R2IN — Receiver 2 input, RS-232 signal input |
| 腳位 4 | R1IN — Receiver 1 input, RS-232 signal input |
| 腳位 5 | V- — Negative charge-pump output for RS-232 signal generation |
| 腳位 6 | R3OUT — Receiver 3 output for unused channel |
| 腳位 7 | R3IN — Receiver 3 input for unused channel |
| 腳位 8 | R4IN — Receiver 4 input for unused channel |
| 腳位 9 | R4OUT — Receiver 4 output for unused channel |
| 腳位 10 | T3IN — Driver 3 input for unused channel |
| 腳位 11 | T2OUT — Driver 2 RS-232 output |
| 腳位 12 | T1OUT — Driver 1 RS-232 output |
| 腳位 13 | T2IN — Driver 2 TTL/CMOS input |
| 腳位 14 | T1IN — Driver 1 TTL/CMOS input |
| 腳位 15 | VCC — Positive +5 V supply input |
| 腳位 16 | V+ — Positive charge-pump output for RS-232 signal generation |
典型應用
MAX232ECSE+ 適用於 6 應用s: Industrial Control Serial Port, Data Acquisition Equipment, RS-232 to TTL Serial Adapter, POS Terminal and Retail Equipment, Instrumentation and Test Equipment, Embedded Service and Configuration Port.
Industrial Control Serial Port
The MAX232ECSE+ is well suited to an RS-232 service or configuration port on an industrial controller because it combines two drivers, two receivers, and an integrated charge pump in one 16-SOIC device. A single +5 V rail generates the required bipolar line levels without adding a negative-supply circuit. The 120 kbps maximum data rate supports legacy controller programming protocols and asynchronous data links commonly running at 9600 to 115200 bps. Its ±15 kV HBM ESD protection is valuable when the connector is exposed to operator contact, although a production design should still evaluate external surge and cable protection for long field wiring.
推薦
Data Acquisition Equipment
The MAX232ECSE+ can bridge a laboratory instrument, data logger, or acquisition unit to a host computer through an RS-232 connection. Its two drivers and two receivers are sufficient for one full-duplex port, while the +5 V single-supply operation simplifies portable and bench-top instrumentation. The 120 kbps capability covers most legacy acquisition-control traffic without becoming the limiting factor in a typical laboratory environment. The extended-temperature ordering option should be checked against the enclosure temperature, and unused receiver inputs must be tied to a valid logic state.
推薦
RS-232 to TTL Serial Adapter
The MAX232ECSE+ is a natural choice for a compact RS-232-to-TTL adapter because its drivers and receivers perform both directions of level translation. The integrated charge pump eliminates the external dual-polarity supply normally associated with RS-232 interfaces, and the 16-SOIC package keeps the footprint practical for small adapter boards. At rates up to 120 kbps, it supports legacy serial equipment and microcontroller console links. Place the charge-pump capacitors and interface-side protection close to the device, and route the connector through the layout guidance in the manufacturer datasheet.
推薦
POS Terminal and Retail Equipment
The MAX232ECSE+ can interface point-of-sale terminals, receipt printers, scales, or service equipment that use legacy RS-232 links. Its 2/2 arrangement supports bidirectional communication with a single transceiver, and the single +5 V supply operation reduces the power-supply burden in compact countertop systems. The device's ±15 kV HBM protection improves tolerance of electrostatic discharge during routine connector handling. For cables leaving the equipment enclosure, evaluate an external network and grounding strategy because device-level ESD protection is not a substitute for cable shielding and chassis bonding.
推薦
Instrumentation and Test Equipment
The MAX232ECSE+ supports legacy test and measurement equipment that exposes a service port for calibration, diagnostics, or automated setup. The integrated charge pump keeps the power tree simple, while the 120 kbps rate is appropriate for command-oriented serial consoles and low-volume instrument data. The 16-SOIC package allows the interface to be placed near the connector while keeping the digital control section on the opposite side of the board. Confirm the exact temperature grade and use the manufacturer pin table before implementing loopback or tying a receiver input to a driver output.
推薦
Embedded Service and Configuration Port
The MAX232ECSE+ is useful for embedded systems that need a manufacturing, configuration, or firmware-recovery port alongside a modern communications interface. The +5 V supply requirement fits many mixed-signal and processor boards, and the integrated charge pump eliminates a separate negative rail. Its 2/2 channel count allows transmit and receive connections on one point-to-point port, while its 120 kbps rating is more than adequate for short configuration sessions. Keep the RS-232 connector away from high-speed digital routing and follow the datasheet layout for charge-pump and interface connections.
推薦
推薦產品摘要
工程參考資料,適用於 MAX232ECSE+ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX232ESE | MAX3232ESE | MAX3232CSE | MAX3222ESE | MAX3232CDBR |
|---|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same | 16-SOIC - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Driver / Receiver Count | 2 drivers / 2 receivers | 2 drivers / 2 receivers | 4 drivers / 4 receivers | 4 drivers / 4 receivers | 2 drivers / 2 receivers | 4 drivers / 4 receivers |
| Supply Voltage | +5 V | +5 V | +5 V | +5 V | +5 V | +5 V |
| Charge Pump | Integrated | Integrated | Integrated | Integrated | Integrated | Integrated |
| Interface Standard | RS-232 and V.28 | RS-232 and V.28 | RS-232 | RS-232 | RS-232 | RS-232 |
| Temperature Grade | Extended-temperature CS ordering option | Confirm specific ordering code | Extended-temperature E ordering option | Extended-temperature CS ordering option | Extended-temperature E ordering option | Commercial-temperature C ordering option |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
主要差異化特點
- Exact 2/2 channel match within the MAX232E family (對比MAX232ESE)
- Higher port density on the same 16-SOIC footprint (對比MAX3232ESE)
- Dedicated shutdown-capable alternative for power-sensitive interfaces (對比MAX3222ESE)
- Broader temperature availability than the commercial-grade option (對比MAX3232CDBR)
設計說明
Place the charge-pump capacitors close to their corresponding V+ and V- pins, and route the RS-232 driver outputs directly toward the connector. Keep the TTL/CMOS inputs and receiver outputs away from the connector and charge-pump nodes to limit capacitive coupling and switching noise. Follow the manufacturer layout example for the MAX232E family rather than substituting a generic RS-232 footprint with different capacitor placement.
Do not assume that a 16-pin SOIC transceiver is automatically interchangeable with the MAX232ECSE+. MAX232E provides two drivers and two receivers, whereas the MAX3232 and MAX3222 alternatives provide different channel counts and feature sets. Check each unused input, power pin, and charge-pump connection against the relevant datasheet before releasing a substitute into production.
For an external RS-232 connector, combine the device's ±15 kV HBM ESD protection with a connector placement that minimizes exposed trace length. Ground the connector shell according to the equipment's chassis and ESD strategy, and evaluate a series termination or external protection network for long or industrial cables. The on-chip ESD rating should not be treated as the complete electromagnetic or surge-protection solution.
Decouple the +5 V supply locally at the VCC pin and keep the return path short. The MAX232E family includes a charge pump, so its switching current is drawn from the same rail that powers the digital interface. Provide adequate supply margin and check the datasheet's supply-current and charge-pump characteristics against the board's load transients before finalizing the power tree.
合規資訊
The manufacturer product page and distributor listings identify the MAX232E family and its RS-232 interface characteristics. Exact RoHS, REACH, halogen-free, and conflict-minerals declarations should be confirmed from the current manufacturer compliance documentation for the selected ordering code.