Analog Devices

MAX306EQI+ - 16:1 CMOS Multiplexer | Analog Devices

MPN: MAX306EQI+ ✓ Hoạt động
5 V Vdss Less than 2.5 nA at +85 degrees Celsius Id Less than 100 ohm Rds(on) 28-pin PLCC, 11.51 x 11.51 mm Package
MOQ: 1 |

MAX306EQI+ Tóm tắt

The Analog Devices MAX306EQI+ is a precision 16-to-1 CMOS analog multiplexer with less than 100 ohm on-resistance, channel-to-channel matching within 5 ohm, and a 28-pin PLCC package measuring 11.51 x 11.51 mm. The MAX306 family also supports dual 8-channel operation, low charge injection below 10 pC, and switching transition times below 250 ns.

An analog multiplexer is an analog switch network that routes one of several input signals to a common output while minimizing distortion, offset, and switching transients. In the signal-chain hierarchy, it belongs to the analog switch and multiplexer category within interface ICs. This precision CMOS implementation is designed for measurement, control, and instrumentation systems where selecting among closely spaced voltage or current signals requires consistent resistance and predictable switching behavior.

Key characteristics include on-resistance below 100 ohm, on-resistance matching between channels within 5 ohm, and variation across the specified analog signal range limited to 7 ohm maximum. Off leakage remains below 2.5 nA at +85 degrees Celsius, while low charge injection below 10 pC helps limit switching disturbances. The device also provides ESD protection greater than 2000 V and uses an improved 44 V silicon-gate CMOS process.

The MAX306's multiplexed architecture reduces the number of external signal connections required by a system. A common 16-to-1 arrangement can select one measurement channel for a shared amplifier or converter, while the family's dual 8-channel configuration can support two multiplexed groups. Matching within 5 ohm is particularly useful when channels are calibrated individually or when gain errors must remain predictable across a scan.

Typical uses include automated test equipment, data-acquisition systems, industrial process monitoring, laboratory instrumentation, and mixed-signal measurement modules. The sub-250 ns transition time supports higher-rate channel scanning, while low leakage and low charge injection are valuable when handling high-impedance sources, sensor outputs, or precision low-level signals.

Designers should verify the control-state truth table, pin assignments, supply requirements, and signal-range limits against the manufacturer datasheet before laying out the PCB. Keeping analog traces short, providing a stable reference and ground plane, and placing decoupling capacitors close to the device can help preserve the low-noise behavior expected from a precision analog multiplexer.

This page combines the manufacturer specifications with engineering-focused application guidance, package details, comparison parameters, and replacement analysis. It is intended to help designers select the correct multiplex configuration, recognize meaningful differences among related MAX306 order codes, and plan a PCB-compatible replacement before committing a precision analog signal chain to production.

Bộ thay thế dễ dàng lắp đặt cho MAX306EQI+ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

MAX306EQI

✅ Drop-In
📦 28-PLCC (11.51 x 11.51 mm)
Same 16:1 configuration, less than 100 ohm on-resistance, and 28-pin PLCC footprint; order-code and qualification suffix differ

📋 Tham chiếu thay thế (không có trong danh mục)

MAX306EQI+T

✅ Drop-In
📦 28-PLCC (11.51 x 11.51 mm)
Same 16:1 configuration, less than 100 ohm on-resistance, and 28-pin PLCC footprint; +T designates tape-and-reel production packaging

📋 Tham chiếu thay thế (không có trong danh mục)

MAX306EQI+ Thông số kỹ thuật

Multiplexer Configuration 16-to-1 / dual 8-to-1
Number of Circuits 1 circuit
On-Resistance Less than 100 ohm
On-Resistance Matching Within 5 ohm between channels
On-Resistance Variation 7 ohm maximum across the specified analog signal range
Off-Leakage Current Less than 2.5 nA at +85 degrees Celsius
Charge Injection Less than 10 pC
Transition Time Less than 250 ns
ESD Protection Greater than 2000 V
Process Technology 44 V silicon-gate CMOS
Điện áp cung cấp 5 V
Hộp 28-pin PLCC, 11.51 x 11.51 mm
Kiểu lắp đặt Surface mount
Channel Count 16 analog channels / dual 8-channel configuration

Hướng dẫn cấu hình chân MAX306EQI+ 28-pin plcc, 11.51 x 11.51 mm

Cấu hình chân cho MAX306EQI+ (28-pin plcc, 11.51 x 11.51 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 28-pin plcc, 11.51 x 11.51 mm cho MAX306EQI+

Không có dữ liệu chân cụ thể sẵn có cho MAX306EQI+.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MAX306EQI+ phù hợp cho 6 Áp dụngs: Automated Test Equipment, Precision Data Acquisition, Industrial Process Monitoring, Laboratory Instrumentation, Mixed-Signal Control Systems, Battery-Powered Measurement Module.

🏭

Automated Test Equipment

The MAX306EQI+ fits automated test systems that must route many test points to a shared measurement chain. Its 16-to-1 configuration reduces the number of analog connections required between the device under test and downstream instrumentation. Less than 100 ohm on-resistance and channel matching within 5 ohm help maintain predictable signal amplitude across the selected channel, while transition time below 250 ns supports rapid point selection. Place the multiplexer close to the instrument amplifier when source impedances are high to minimize added sensitivity to capacitance and noise pickup.

🖥️

Precision Data Acquisition

The MAX306EQI+ is appropriate for multichannel data-acquisition modules in which several sensor or divider outputs share an amplifier and analog-to-converter input. Its 16-to-1 routing reduces wiring complexity, while off leakage below 2.5 nA at +85 degrees Celsius is useful with high-impedance sources. Charge injection below 10 pC limits the voltage disturbance created when a channel is selected. The 28-pin PLCC footprint is suitable for surface-mount assembly, and the less-than-250 ns transition time enables faster scans when downstream filtering does not dominate settling time.

🏭

Industrial Process Monitoring

The MAX306EQI+ can select pressure, temperature, or level signals from multiple industrial sensors and route them into a shared conditioning circuit. Its on-resistance remains below 100 ohm, and channel-to-channel matching within 5 ohm supports repeatable measurements when each input path is calibrated. Low off leakage reduces loading errors in high-impedance sensor circuits, while ESD protection greater than 2000 V adds handling robustness. The design should still use protected routing, appropriate grounding, and input-range protection because those protections are separate from the multiplexer's internal ESD rating.

🔧

Laboratory Instrumentation

The MAX306EQI+ fits laboratory instruments that connect multiple transducers, reference nodes, or programmable inputs to a common precision front end. The 16-to-1 topology keeps the analog routing compact while matching within 5 ohm and limiting on-resistance variation to 7 ohm maximum across the specified signal range. Those characteristics help preserve repeatable gain and offset calibration. Transition time below 250 ns permits rapid channel selection, while low charge injection below 10 pC reduces the disturbance seen by sensitive downstream circuitry.

🧩

Mixed-Signal Control Systems

The MAX306EQI+ is useful in mixed-signal control boards that must select feedback, setpoint, or diagnostic signals before conversion by a common analog channel. Its 16-to-1 architecture simplifies the routing matrix and reduces the number of external analog switches. The less-than-100-ohm on-resistance provides low series impedance for typical low-impedance sensor interfaces, and the sub-250 ns transition time supports responsive channel updates. For high-precision control, include settling time, charge injection, and the finite on-resistance in the loop-error budget rather than treating channel selection as instantaneous.

⚡

Battery-Powered Measurement Module

The MAX306EQI+ can reduce analog routing hardware in compact battery-powered measurement modules by selecting up to 16 external signals through one common path. The multiplexer's 28-pin PLCC package supports compact surface-mount layouts, and its low leakage can limit the load imposed on high-impedance sensors between selections. Designers must still budget for quiescent current and supply requirements using the manufacturer datasheet. Low on-resistance helps prevent the selected sensor from seeing excessive divider loading, although cable capacitance and leakage should also be evaluated.

Tóm tắt các sản phẩm được đề xuất

MAX306EQI Same-family 16-to-1 PLCC multiplex option Được sử dụng trong: Automated Test Equipment, Precision Data Acquisition, Industrial Process Monitoring, Laboratory Instrumentation, Mixed-Signal Control Systems, Battery-Powered Measurement Module MAX306EQI+T Tape-and-reel production configuration Được sử dụng trong: Automated Test Equipment, Precision Data Acquisition, Industrial Process Monitoring, Laboratory Instrumentation, Mixed-Signal Control Systems, Battery-Powered Measurement Module
What is the MAX306EQI+?
The MAX306EQI+ is a precision 16-to-1 CMOS analog multiplexer in a 28-pin PLCC package. According to the Analog Devices MAX306/MAX307 datasheet, it provides less than 100 ohm on-resistance, matching within 5 ohm between channels, low charge injection below 10 pC, and transition times below 250 ns. The MAX306 family can also be configured for dual 8-channel operation, making it useful for compact measurement and control systems.
What are the key specifications of MAX306EQI+ that engineers should know?
The MAX306EQI+ combines a 16-to-1 multiplex configuration, less than 100 ohm on-resistance, and switching transition time below 250 ns. According to the Analog Devices manufacturer datasheet, channel matching is within 5 ohm, resistance variation is no more than 7 ohm over the specified signal range, off leakage is below 2.5 nA at +85 degrees Celsius, and charge injection is below 10 pC.
Is the MAX306EQI+ pin-compatible with MAX306EQI?
The MAX306EQI+ is electrically and mechanically compatible with the MAX306EQI when both are installed in the same 28-pin PLCC footprint. The Analog Devices product page identifies both variants under the MAX306 family, while the distributor listings identify the MAX306EQI as a 28-pin PLCC, 16-to-1 device with less than 100 ohm on-resistance. Final qualification should also confirm temperature, compliance, and packing requirements.
What can replace the MAX306EQI+ on an existing PCB?
The MAX306EQI is the closest documented drop-in candidate because it uses the same 28-pin PLCC footprint and belongs to the same 16-to-1 MAX306 family. The MAX306EQI+T also retains the same electrical configuration and package while using a tape-and-reel production format. According to the manufacturer datasheet, both provide the same core switching specifications; verify ordering, temperature, and assembly requirements before substitution.
MAX306EQI+ vs MAX306EQI+T - which is better for production?
MAX306EQI+T is generally the better production choice when the assembler uses tape-and-reel feeding, while MAX306EQI+ is appropriate when the required orderable configuration is already defined by the BOM or assembly plan. The Analog Devices datasheet describes a common MAX306/MAX307 silicon platform, and distributor listings show the same 28-pin PLCC package and 16-to-1 electrical configuration. The distinction is primarily an orderable packaging code.
Is MAX306EQI+ suitable for precision data acquisition?
Yes, the MAX306EQI+ is suitable for precision data-acquisition systems that scan multiple analog inputs. The manufacturer datasheet specifies less than 100 ohm on-resistance, channel matching within 5 ohm, off leakage below 2.5 nA at +85 degrees Celsius, and charge injection below 10 pC. These characteristics help limit channel-dependent gain errors and switching disturbances when the selected signal feeds a precision amplifier or converter.
Where to download the MAX306EQI+ datasheet PDF?
Download the MAX306/MAX307 manufacturer datasheet from the Analog Devices technical-documentation URL listed on this page. The document covers the MAX306 family's 16-channel and dual 8-channel configurations, electrical characteristics, applications, and ordering information. Use the package drawing and pin-description tables when assigning the 28-pin PLCC footprint and verifying control logic for the selected multiplexer configuration.
Where can I find the MAX306EQI+ pinout and package drawing?
The MAX306EQI+ pinout and mechanical drawing are located in the pin-description and package sections of the Analog Devices MAX306/MAX307 datasheet. The device is specified in a 28-pin PLCC package measuring 11.51 x 11.51 mm. Assign PCB pads from the manufacturer drawing rather than relying on a generic PLCC footprint, and cross-check pin 1 orientation and exposed versus non-exposed pad details.
What is the on-resistance of MAX306EQI+?
The MAX306EQI+ has an on-resistance of less than 100 ohm. According to the Analog Devices MAX306/MAX307 manufacturer datasheet, on-resistance matching remains within 5 ohm between channels, and resistance variation across the specified analog signal range is limited to 7 ohm maximum. These parameters are important when a multiplexer feeds a high-gain amplifier because they directly influence channel-dependent gain error.
How fast is the MAX306EQI+ analog switch?
The MAX306EQI+ has a specified transition time below 250 ns. The Analog Devices MAX306/MAX307 datasheet identifies this figure as one of the family's principal dynamic characteristics, alongside charge injection below 10 pC. The switching rate supports measured channel scanning in instrumentation and data-acquisition systems, although total acquisition time also depends on source impedance, filtering, and downstream converter settling.
Can MAX306EQI+ replace MAX306EQI+G126?
The MAX306EQI+ may be used as a functional replacement for MAX306EQI+G126 when both order codes specify the same MAX306 die, 28-pin PLCC package, and electrical configuration, but the purchase order should be checked before assembly. The Analog Devices product family uses several order suffixes for packaging and shipment conditions. Confirm that the replacement quantity, reel format, temperature grade, and compliance requirements match the original production setup.
Where can I buy MAX306EQI+ online?
Use the Request a Quote form on this page to request MAX306EQI+ availability, current commercial terms, and lead time. XAIPART can confirm the correct orderable suffix, package, and quantity for your assembly requirements. Quote requests are also the appropriate route for obsolete or constrained catalog parts because stock and manufacturing conditions can change quickly.
What is the price of MAX306EQI+?
The current commercial price for MAX306EQI+ should be obtained through the Request a Quote form on this page. The structured pricing area on the page is used for current, quantity-dependent quotations and avoids presenting a stale catalog amount. Include the required package suffix, production quantity, and assembly delivery format when requesting a quotation for this 28-pin PLCC device.
What is the lead time for MAX306EQI+?
The current lead time for MAX306EQI+ should be confirmed through the Request a Quote form on this page. The manufacturer lists the MAX306 family in production, but orderable suffix, quantity, and packaging configuration can affect availability. Provide your forecast quantities and required delivery date so the supplier can quote the appropriate schedule for the exact production part.
Is MAX306EQI+ in stock?
Stock for MAX306EQI+ is best confirmed through the Request a Quote form on this page. The product is listed as a production MAX306 family device, but inventory changes by orderable suffix and packaging format. Include your required quantity and target date in the request, and specify whether MAX306EQI+, MAX306EQI+T, or another approved production suffix is acceptable.
What is the best Analog Devices equivalent for MAX306EQI+?
The best documented Analog Devices equivalent is the MAX306EQI because it retains the same 16-to-1 CMOS architecture and 28-pin PLCC package as the MAX306EQI+. For high-volume surface-mount assembly, MAX306EQI+T provides the same core device in a tape-and-reel format. According to the manufacturer datasheet, both share the MAX306 family's electrical characteristics; the order suffix determines the appropriate procurement configuration.

Dữ liệu tham khảo kỹ thuật cho MAX306EQI+ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose MAX306EQI+ when your design requires a precision 16-to-1 CMOS analog multiplexer in the 28-pin PLCC footprint and your assembly plan calls for that specific orderable suffix. Select MAX306EQI+T when the same electrical design is needed in a tape-and-reel production format for automated component placement. The MAX306EQI is also a close same-package choice when its order-code, qualification, and procurement requirements are approved for the assembly process. All three approaches use the same MAX306 family's less-than-100-ohm on-resistance, within-5-ohm channel matching, sub-250 ns transition time, and low charge-injection characteristics. Cross-package MAX306 versions should not be treated as drop-in replacements because PDIP and SOIC footprints require different PCB land patterns. Before finalizing a substitution, verify pin assignments, temperature range, compliance status, and reel or tray requirements against the manufacturer ordering guide.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MAX306EQI MAX306EQI+T
Brand Analog Devices Analog Devices Analog Devices
Package 28-PLCC (11.51 x 11.51 mm) 28-PLCC (11.51 x 11.51 mm) 28-PLCC (11.51 x 11.51 mm)
Multiplexer Configuration 16:1 16:1 16:1
Number of Circuits 1 circuit 1 circuit 1 circuit
On-Resistance Less than 100 ohm Less than 100 ohm Less than 100 ohm
On-Resistance Matching Within 5 ohm between channels Within 5 ohm between channels Within 5 ohm between channels
Charge Injection Less than 10 pC Less than 10 pC Less than 10 pC
Transition Time Less than 250 ns Less than 250 ns Less than 250 ns
Off-Leakage Current Less than 2.5 nA at +85 degrees Celsius Less than 2.5 nA at +85 degrees Celsius Less than 2.5 nA at +85 degrees Celsius

Bảo phân biệt quan trọng

  • Combines precision channel matching with rapid switching (vsMAX306EQI)
  • Maintains the same electrical architecture across production suffixes (vsMAX306EQI+T)
  • Low channel disturbance for precision acquisition (vsMAX306EQI)

Ghi chú thiết kế

Use the Analog Devices package drawing to create the 28-pin PLCC footprint and confirm the orientation of pin 1 before routing. Place the device near the source of the multiplexed signals when high-impedance nodes are involved, because long copper tracks can add parasitic capacitance and increase settling time. Keep the common output path short and route it away from switching-clock and digital-control traces.

Include on-resistance, source impedance, amplifier input capacitance, and the downstream filter in the settling-time calculation. The specified transition time below 250 ns does not by itself define the time required for a complete measurement acquisition. For high-impedance sources, verify leakage and capacitance against the MAX306/MAX307 datasheet because the switched capacitance can determine how long the measurement chain requires to settle.

Provide a continuous ground reference beneath and around the analog routing area, and place supply-decoupling components close to the device pins using the manufacturer layout guidance. Keep the analog common node away from high-current return paths and switching power-converter nodes. Although the device provides ESD protection greater than 2000 V, external protection may still be required for accessible industrial connectors and long external wiring.

Do not assume that every MAX306 order suffix is interchangeable at procurement. MAX306EQI+ and MAX306EQI+T use the same core 16-to-1 electrical architecture and 28-pin PLCC package, but the suffix can affect packing, shipment form, or qualification. Confirm the exact part marking, temperature grade, reel configuration, assembly method, and manufacturer ordering information before approving a substitution.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The MAX306 product page identifies the family as production, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were established from the cited content.

Dữ liệu được xác minh vào: 2026-11-14 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MAX306EQI+ datasheet MAX306EQI+ pinout MAX306EQI+ datasheet pdf MAX306EQI+ equivalent MAX306EQI+ replacement MAX306EQI+ cross reference MAX306EQI+ footprint MAX306EQI+ application circuit Analog Devices MAX306EQI+ MAX306EQI+ 16 channel multiplexer MAX306EQI+ price MAX306EQI+ stock

Các bộ phận và thuật ngữ liên quan

Analog Devices Maxim Integrated MAX306EQI+ MAX306EQI MAX306EQI+T MAX306 MAX307 analog multiplexer CMOS analog switch 16-to-1 multiplexer dual 8-channel multiplexer interface IC semiconductor on-resistance channel matching charge injection off-leakage current transition time 28-pin PLCC surface mount data acquisition automated test equipment industrial process monitoring precision instrumentation
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ