Analog Devices

MAX3221EAE+T - 3V RS-232 Transceiver | Analog Devices

MPN: MAX3221EAE+T ✓ Hoạt động
3 V to 5.5 V Vdss Approximately 1 µA Id 16-pin SSOP Package
MOQ: 1 |

MAX3221EAE+T Tóm tắt

The Analog Devices MAX3221EAE+T is a 1-driver, 1-receiver RS-232 transceiver with a 3 V to 5.5 V single-supply range, AutoShutdown behavior, and enhanced electrostatic-discharge protection. It is packaged in a 16-pin SSOP and is intended for systems that require a single power rail while exchanging data with an RS-232-compatible equipment.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received line-level signals back into logic levels. The MAX3221 belongs to the broader RS-232 interface, communication interface, and interface IC hierarchy. Its integrated charge-pump supply generates the bipolar voltage required by the RS-232 transmitter, allowing operation from a single low-voltage supply rather than a separate positive and negative power rail.

The MAX3221E family features automatic shutdown and wake-up behavior. When no valid signal is detected at the receiver inputs, the on-board power supply and drivers can shut down, reducing supply current to approximately 1 µA according to the manufacturer product information. This behavior is useful in battery-powered and intermittently connected equipment because the interface does not need to remain fully powered between communication sessions.

The E version adds enhanced electrostatic-discharge protection. The manufacturer lists ±15 kV ESD protection for the MAX3221E, while the MAX3221 product family is designed for EIA/TIA-232 and V.28/V.24 communications. The MAX3221E product page also identifies IEC 61000-4-2 ESD protection for the RS-232 pins. These ratings should be evaluated against the connector placement and system grounding strategy rather than treated as a substitute for external surge protection.

Typical uses include industrial serial-port equipment, point-of-sale terminals, data acquisition equipment, configuration interfaces, and legacy peripheral connectivity. The 16-pin SSOP footprint suits compact designs where space is constrained, although connector routing and exposed-charge-pump behavior still require careful PCB planning. The MAX3221E/MAX3223E/MAX3243E family is available from a 3 V supply, with the exact model selection determined by the required number of drivers and receivers.

Designers should follow the manufacturer’s recommended charge-pump capacitor connections, place the four external capacitors close to their associated pins, and route the RS-232 traces away from sensitive analog and high-speed digital paths. Receiver and driver enable functions provide local control, while AutoShutdown can reduce power when the remote device is disconnected. The MAX3221EAE+T is therefore best suited to compact, single-supply RS-232 links that require automatic power saving and improved ESD resilience.

This page combines the manufacturer family information with practical interface-selection guidance, package-specific implementation considerations, and qualified comparison options for engineers evaluating replacements for the MAX3221EAE+T.

Bộ thay thế dễ dàng lắp đặt cho MAX3221EAE+T — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3221EAE+T (cùng hình factor và footprint) — khác nhau ở ESD Protection, Product Type, Package, Supply Voltage Range, Interface Standard.

Analog Devices
ESD Protection: Enhanced ESD protection
Package: 16-SSOP
Interface Standard: EIA/TIA-232
So sánh với MAX3221EAE+T →
Analog Devices
ESD Protection: ±15 kV IEC ESD
Product Type: Single-channel RS-232 transceiver
So sánh với MAX3221EAE+T →
Analog Devices
ESD Protection: ±15kV
Supply Voltage Range: 3.0V to 5.5V
Interface Standard: EIA/TIA-232
So sánh với MAX3221EAE+T →
Texas Instruments
ESD Protection: ±15 kV pin to pin
Product Type: Single-channel RS-232 line driver/receiver
Interface Standard: TIA/EIA-232-F
So sánh với MAX3221EAE+T →

MAX3221EAE+

✅ Drop-In
Analog Devices
📦 16-pin SSOP
RS-232 transceiver · 3 V to 5.5 V · 120 kbps · 1 · 1 · 1 uA · 16-SSOP · 5.30 mm

Liên hệ để biết giá

Xem tài liệu →

MAX3221ECAE+T

✅ Drop-In
Analog Devices
📦 16-pin SSOP
RS-232 transceiver · 1 transmitter, 1 receiver · 3.0V to 5.5V · 250kbps · ±15kV · approximately 1µA · EIA/TIA-232 · V.28 and V.24

Liên hệ để biết giá

Xem tài liệu →

MAX3221ECAE+

✅ Drop-In
📦 16-pin SSOP
0% package difference; the C-grade ordering code is the principal qualification-related change

📋 Tham chiếu thay thế (không có trong danh mục)

MAX3221IDB

✅ Drop-In
Texas Instruments
📦 16-pin SSOP
Single-channel RS-232 line driver/receiver · 3 V to 5.5 V · 250 kbps · ±15 kV pin to pin · 1 driver · 1 receiver · Dedicated enable pin · Dual charge-pump circuit

Liên hệ để biết giá

Xem tài liệu →

MAX3221EAE+TG1Z

✅ Drop-In
Analog Devices
📦 16-pin SSOP
Single-channel RS-232 transceiver · 1 driver · 1 receiver · 3 V to 5.5 V · 250 kbps · 1 µA · ±15 kV IEC ESD · Supported

Liên hệ để biết giá

Xem tài liệu →

MAX3221EAE+T Thông số kỹ thuật

Product Type RS-232 transceiver
Number of Drivers 1 driver
Number of Receivers 1 receiver
Supply Voltage Range 3 V to 5.5 V
Hộp 16-pin SSOP
Kiểu lắp đặt Surface mount
Shutdown Supply Current Approximately 1 µA
ESD Protection ±15 kV
ESD Standard IEC 61000-4-2
Communication Standard EIA/TIA-232
Supported V.28/V.24 Rates V.28 and V.24
Power Architecture Single-supply charge-pump design
External Charge-Pump Capacitors 4 capacitors
AutoShutdown Feature Yes
Auto-Wakeup Feature Yes
Driver Enable Control Dedicated enable pin

Hướng dẫn cấu hình chân MAX3221EAE+T 16-pin ssop

Cấu hình chân cho MAX3221EAE+T (16-pin ssop gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 16-pin ssop cho MAX3221EAE+T

Không có dữ liệu chân cụ thể sẵn có cho MAX3221EAE+T.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MAX3221EAE+T phù hợp cho 6 Áp dụngs: Industrial Serial-Port Control, Point-of-Sale Terminal Interface, Data-Acquisition Equipment, Legacy Peripheral Connectivity, Battery-Powered Service Terminal, Networked Equipment Management Port.

🏭

Industrial Serial-Port Control

The MAX3221EAE+T fits compact industrial controllers that must connect a logic-level serial controller to an RS-232 equipment port. Its 3 V to 5.5 V single-supply operation eliminates the need for a separate positive and negative transceiver rail, while the integrated charge pump supplies the required RS-232 levels. One driver and one receiver are sufficient for a point-to-point management or configuration link. AutoShutdown is valuable when the connected equipment spends substantial time idle because the family can reduce supply current to approximately 1 µA after receiver inputs cease detecting a valid signal. The ±15 kV ESD rating also strengthens the interface against charged cable and connector transients, although the final protection strategy must also account for ground offsets and external cable routing.

🖥️

Point-of-Sale Terminal Interface

Point-of-sale equipment commonly retains RS-232 connections for receipt printers, scanners, scales, and service consoles. The MAX3221EAE+T provides the required line-driver and receiver functions in a compact 16-pin SSOP, allowing a controller board to use only a 3 V to 5.5 V supply. AutoShutdown reduces power when no valid receiver activity is present, which is advantageous in countertop systems that remain energized for long periods. The manufacturer identifies the MAX3221E family as compliant with EIA/TIA-232 requirements and provides enhanced ESD protection for exposed serial connections. Place the four external charge-pump capacitors close to their associated pins, observe the supply sequencing requirements, and keep the connector-side return path compact to reduce noise and ground-potential problems.

📡

Data-Acquisition Equipment

The MAX3221EAE+T is appropriate for laboratory and industrial data-acquisition products that expose a legacy RS-232 configuration or command port. A single transceiver channel can carry an asynchronous serial command stream from the acquisition controller to a computer or service terminal. Operating from 3 V to 5.5 V permits the interface to share power with modern embedded systems while the charge-pump circuit creates the bipolar signal required for RS-232. Automatic shutdown and wake-up reduce energy use when no terminal is connected, and the 16-pin SSOP preserves board area. The E-version ESD protection is particularly relevant when the port is accessible through an external panel connector. Designers should still use the manufacturer’s reference layout and verify cable length, ground reference, and data-rate requirements against the complete device specifications.

🔧

Legacy Peripheral Connectivity

The MAX3221EAE+T bridges modern digital electronics and legacy peripherals that retain an RS-232 command interface. Examples include programmable instruments, access-control terminals, laboratory controllers, and service equipment. One transmitter and one receiver are sufficient for a basic bidirectional control channel, while the dedicated driver-enable and receiver-enable controls allow local management of the interface. Because the MAX3221E family supports operation from 3 V to 5.5 V, it can be integrated into systems that no longer provide the ±12 V supply commonly associated with older RS-232 implementations. The integrated charge pump removes that external bipolar supply requirement. For exposed installations, route the line and ground as a controlled pair and apply the manufacturer’s ESD and layout guidance at the connector entry.

📱

Battery-Powered Service Terminal

A battery-powered service terminal can use MAX3221EAE+T AutoShutdown behavior to avoid wasting power on an inactive RS-232 connection. The MAX3221 family can reduce its supply current to approximately 1 µA when the receiver inputs do not sense a valid signal, then automatically resume operation when activity appears. This is useful in portable diagnostic equipment, field-service tools, and maintenance terminals that connect to equipment intermittently. The 3 V to 5.5 V operating range supports common portable supply architectures, and the 16-pin SSOP leaves room for a compact PCB. Designers should account for the logic levels used by the host controller, ensure the enable polarity is handled correctly, and confirm wake-up timing against the communication protocol before treating the low-power mode as a transparent power-management feature.

🌐

Networked Equipment Management Port

The MAX3221EAE+T can provide a dedicated RS-232 management channel on network appliances, test equipment, and embedded control systems. One port supports configuration loading, diagnostics, firmware commands, or basic status reporting without adding another transmitter and receiver channel to the board. The interface’s 3 V to 5.5 V operation allows it to use the same supply as common system logic, while the integrated charge pump generates the required RS-232 voltage internally. AutoShutdown helps manage power when the management port is idle, and the MAX3221E family’s ±15 kV ESD protection improves robustness at an exposed connector. The design should retain a defined signal ground, use controlled connector pin assignments, and separate the RS-232 routing from clocked digital and sensitive analog nets.

What is the MAX3221EAE+T?
The MAX3221EAE+T is a 1-driver, 1-receiver RS-232 transceiver from Analog Devices that operates from a 3 V to 5.5 V single supply and is packaged in a 16-pin SSOP. According to the manufacturer’s MAX3221 product information, it uses an integrated charge-pump supply, supports AutoShutdown and automatic wake-up, and is intended for communication between a logic-level controller and an RS-232 port.
What are the key specifications of MAX3221EAE+T that engineers should know?
The MAX3221EAE+T provides one RS-232 driver, one receiver, a 3 V to 5.5 V supply range, AutoShutdown, automatic wake-up, and ±15 kV ESD protection in a 16-pin SSOP. The MAX3221E family also meets EIA/TIA-232 requirements and provides IEC 61000-4-2 protection on the RS-232 pins. The family uses four external charge-pump capacitors.
How does the MAX3221EAE+T operate from a single supply?
The MAX3221EAE+T uses an integrated charge-pump circuit to create the bipolar voltage required by an RS-232 transmitter from one 3 V to 5.5 V supply. The manufacturer states that the charge pump and four small external capacitors allow single-supply operation. These capacitors must be connected and placed according to the datasheet’s recommended application circuit.
What is AutoShutdown on the MAX3221EAE+T?
AutoShutdown disables the MAX3221EAE+T’s on-board supply and drivers when the receiver inputs do not detect a valid signal level. According to the manufacturer product page, the MAX3221 family can reduce supply current to approximately 1 µA in this condition. The interface automatically wakes when a valid activity is detected, making the feature useful for low-power serial-port equipment.
Where can I download the MAX3221EAE+T datasheet PDF?
The official MAX3221E datasheet and product information is available from Analog Devices at https://www.analog.com/en/products/MAX3221E.html. The MAX3221 family page is also available at https://www.analog.com/en/products/max3221.html. Use these manufacturer pages for the complete electrical characteristics, pin descriptions, capacitor values, recommended layout, and ordering information.
Where can I find the MAX3221EAE+T pinout?
The MAX3221EAE+T pinout is shown in the pin-description section of the official MAX3221E manufacturer datasheet. The device is a 16-pin SSOP with one driver, one receiver, charge-pump connections, supply and ground pins, and enable controls. Assign the PCB nets from the complete pin-description table rather than relying only on the package diagram.
What is the difference between MAX3221EAE+T and MAX3221ECAE+T?
The MAX3221EAE+T and MAX3221ECAE+T belong to the same MAX3221E interface family and use the same 16-pin SSOP footprint. The available comparison information identifies differences involving compliance and related device attributes, but it does not provide a complete verified parameter table for the C-qualified ordering code. Confirm temperature, automotive qualification, and lifecycle requirements against the manufacturer datasheet.
Is MAX3221ECAE+T a drop-in replacement for MAX3221EAE+T?
The MAX3221ECAE+T is a same-family alternative in a 16-pin SSOP package and is the closest identified candidate for the MAX3221EAE+T. It is listed as a direct comparison and replacement candidate in the cross-reference results. Before substitution, verify the ordering temperature grade, automotive qualification, and production status in the manufacturer datasheet.
What is the best drop-in replacement for MAX3221EAE+T?
The MAX3221ECAE+T is the best identified same-family drop-in candidate because it uses the same 16-pin SSOP format and appears directly in MAX3221EAE+T comparison results. Several other MAX3221 ordering codes are also available, but ordering suffixes can change temperature grade or qualification rather than electrical function. Use the manufacturer ordering table to confirm the exact replacement.
What can replace the MAX3221EAE+T?
The MAX3221ECAE+T can replace the MAX3221EAE+T when the required temperature grade, qualification status, and lifecycle requirements are satisfied. The MAX3221EAE+, MAX3221ECAE+, MAX3221IDB, and MAX3221EAE+TG1Z are additional family alternatives associated with the cross-reference results. Confirm pinout and ordering-code requirements before approving any substitution.
Is MAX3221EAE+T the same as MAX3221EAE+?
The MAX3221EAE+T and MAX3221EAE+ identify the same MAX3221E electrical family, with the “+T” ordering suffix indicating the tape-and-reel shipment format. Both are associated with the 16-pin SSOP version. The exact suffix, temperature range, and shipping quantity should still be checked in the manufacturer ordering table.
When should I choose MAX3221EAE+T over MAX3221ECAE+T?
Choose the MAX3221EAE+T when the standard A-grade ordering option meets the product’s environmental and qualification requirements. Choose the MAX3221ECAE+T only when its C-grade attributes provide a necessary benefit or the approved supply plan requires it. Both use the same 16-pin SSOP interface, so the decision should be based on qualification and procurement rather than footprint.
Is MAX3221EAE+T suitable for industrial equipment?
The MAX3221EAE+T is suitable for compact equipment that needs one RS-232 port from a 3 V to 5.5 V supply, automatic power saving, and enhanced ESD protection. Its suitability for a specific industrial environment depends on the verified operating-temperature range, system grounding, isolation strategy, and applicable product qualification. Request those details before treating it as an industrial-rated substitute.
Where can I buy MAX3221EAE+T online?
Use the Request a Quote form on this page to request MAX3221EAE+T availability, current pricing, lead time, and shipment quantity. The exact suffix identifies the tape-and-reel ordering option in a 16-pin SSOP package. The request should include the required production quantity, date code policy, and destination country for a precise quotation.
What is the price and lead time for MAX3221EAE+T?
Current price and lead time for the MAX3221EAE+T are obtained through the Request a Quote form on this page. The form supports a production-quantity quotation and avoids presenting a stale quantity-break figure. Include the required delivery date, standard or nonstandard packaging, and inspection requirements so the supply response reflects the actual build plan.
Is MAX3221EAE+T in stock?
Live stock status for the exact MAX3221EAE+T ordering code should be confirmed through the Request a Quote form on this page. Because availability can change with manufacturer inventory and shipment packaging, request the quantity and required delivery date rather than relying on a family-level stock statement. The request will identify the current supply position for the tape-and-reel version.

Dữ liệu tham khảo kỹ thuật cho MAX3221EAE+T — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the MAX3221EAE+T for a compact RS-232 link that needs one transmitter, one receiver, 3 V to 5.5 V single-supply operation, automatic shutdown, and enhanced ESD protection. The MAX3221EAE+ is the closest ordering option when a non-tape-and-reel shipment form is preferred, while MAX3221ECAE+T and MAX3221ECAE+ are the logical choices when the C-grade ordering attributes fit the product program. MAX3221IDB provides another same-family package option, and MAX3221EAE+TG1Z may fit programs requiring that specific grade designation. All five alternatives use the 16-pin SSOP format, but the suffix differences must be checked against temperature, qualification, and procurement requirements. If a design needs multiple RS-232 ports, a MAX3223E-family device with more drivers and receivers is more appropriate than changing the electrical role of a MAX3221 replacement.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MAX3221EAE+ MAX3221ECAE+T MAX3221ECAE+ MAX3221IDB MAX3221EAE+TG1Z
Package 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Driver and Receiver Count 1 driver, 1 receiver 1 driver, 1 receiver 1 driver, 1 receiver 1 driver, 1 receiver 1 driver, 1 receiver 1 driver, 1 receiver
Supply Voltage Range 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V 3 V to 5.5 V
AutoShutdown Yes Yes Yes Yes Yes Yes
Automatic Wake-Up Yes Yes Yes Yes Yes Yes
ESD Protection ±15 kV ±15 kV ±15 kV ±15 kV ±15 kV ±15 kV
External Charge-Pump Capacitors 4 capacitors 4 capacitors 4 capacitors 4 capacitors 4 capacitors 4 capacitors
Ordering-Code Grade A-grade ordering code A-grade ordering code C-grade ordering code C-grade ordering code IDB ordering code TG1Z ordering code

Bảo phân biệt quan trọng

  • Single-supply RS-232 operation (vsMAX3221EAE+)
  • Same-footprint grade flexibility (vsMAX3221ECAE+T)
  • Automatic low-power behavior (vsMAX3221IDB)
  • ESD resilience for exposed connectors (vsMAX3221EAE+TG1Z)

Ghi chú thiết kế

Place the four external charge-pump capacitors close to their designated MAX3221 pins and use short, direct ground returns. Keep the charge-pump loop compact because long capacitor or ground connections can increase radiated noise and reduce the effectiveness of the automatic power-management behavior. Follow the manufacturer’s recommended PCB layout, including the relative placement of the RS-232 connector and logic-side circuitry.

Do not assume that all MAX3221 ordering codes are interchangeable without checking their temperature grade and qualification attributes. MAX3221EAE+T, MAX3221ECAE+T, MAX3221IDB, and MAX3221EAE+TG1Z share the functional family and 16-pin SSOP format, but the ordering suffix can change procurement or qualification requirements. Confirm the complete ordering table before a PCB or production substitution.

Route RS-232 driver outputs directly toward the connector and keep them away from sensitive analog inputs, crystal circuits, and switching-converter power paths. Maintain a compact signal-ground return with the line conductors. The MAX3221E family provides ±15 kV ESD protection, but connector placement, chassis grounding, and cable-entry practices remain important because the device rating does not remove every system-level transient risk.

Allow the device to enter its automatic shutdown state only when the connected system can tolerate the wake-up sequence. The MAX3221 family can reduce supply current to approximately 1 µA when no valid receiver activity is detected, but the host controller must use the enable and status pins correctly. Avoid repeatedly forcing the transmitter on when no peer is connected, because that removes the principal power-saving benefit of AutoShutdown.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The MAX3221E family information identifies IEC 61000-4-2 ESD protection and ±15 kV ESD protection. RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status are not explicitly established for the exact MAX3221EAE+T ordering code.

Dữ liệu được xác minh vào: 2026-11-09 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MAX3221EAE+T datasheet MAX3221EAE+T datasheet pdf MAX3221EAE+T pinout MAX3221EAE+T specifications MAX3221EAE+T equivalent MAX3221EAE+T replacement MAX3221EAE+T drop-in replacement MAX3221EAE+T cross reference MAX3221EAE+T footprint MAX3221EAE+T schematic MAX3221EAE+T price MAX3221EAE+T stock Analog Devices MAX3221EAE+T MAX3221EAE+T vs MAX3221ECAE+T 16-pin SSOP RS-232 transceiver

Các bộ phận và thuật ngữ liên quan

Analog Devices Maxim Integrated MAX3221EAE+T MAX3221EAE+ MAX3221ECAE+T MAX3221ECAE+ MAX3221IDB MAX3221EAE+TG1Z RS-232 transceiver RS-232 interface communication interface IC interface IC semiconductor single-driver, single-receiver transceiver charge-pump circuit AutoShutdown automatic wake-up supply current ESD protection IEC 61000-4-2 EIA/TIA-232 V.28 V.24 16-pin SSOP SSOP family surface-mount package industrial serial port point-of-sale terminal data-acquisition equipment legacy peripheral connectivity
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ