Analog Devices

MAX3488EESA+T - 12Mbps RS-485/RS-422 Transceiver | Analog Devices

MPN: MAX3488EESA+T ✓ Hoạt động
3.3 V Vdss RS-485 and RS-422 Rds(on) 8-pin SOIC Package
MOQ: 1 |

MAX3488EESA+T Tóm tắt

Analog Devices MAX3488EESA+T is a 3.3 V powered, half-duplex RS-485/RS-422 transceiver with one driver and one receiver, 12 Mbps maximum data rate, ±15 kV ESD protection, and slew-rate-limited signaling. The device is supplied in an 8-pin SOIC package and is configured for 3 V to 3.6 V operation. Its transceiver architecture supports bidirectional point-to-point and multidrop industrial communication links.

An RS-485/RS-422 transceiver is an interface IC that converts logic-level digital signals into balanced differential signals and reconstructs logic-level data from received differential signals. Within the interface hierarchy, this device combines an RS-485/RS-422 line driver, a line receiver, ESD protection, and slew-rate control in one semiconductor package. It supports the physical layer used by industrial automation, building controls, instrumentation, and data-acquisition equipment.

The MAX3488EESA+T provides a 12 Mbps data rate, ±15 kV ESD-protected inputs, and a slew-rate-limited driver. The low-power 3.3 V design supports systems in which transceiver power must remain compatible with modern digital logic. One driver and one receiver per package make the device appropriate for half-duplex buses that share a physical cable pair, subject to the operating requirements of the selected network topology.

Slew-rate limitation reduces the high-frequency content of transmitted transitions, helping limit electromagnetic interference and reflections on cables that may not be perfectly terminated. The integrated ESD protection is a major system-level benefit for field-facing equipment because it strengthens the interface against electrostatic discharge encountered during installation, servicing, or connection of external cables.

Typical applications include industrial RS-485 control networks, building-automation equipment, factory data acquisition, remote instrumentation, and isolated or non-isolated industrial communication modules. In a multidrop bus, the designer must preserve the transceiver enable state during receive intervals, configure termination correctly, and verify that all connected nodes use compatible data rates and polarity.

For a new design, place the MAX3488EESA+T close to the connector and protection network, route the balanced pair as a tightly coupled differential pair, and provide local bypassing. Confirm that the board ground and cable shield strategy meet the grounding requirements of the industrial installation; the transceiver's ESD rating does not replace an external surge or lightning-protection design.

This product overview combines the manufacturer's interface description with drop-in family options, package guidance, application examples, and practical PCB considerations. It highlights the MAX3488EESA+T's 3.3 V supply, 12 Mbps speed, ±15 kV ESD protection, and 8-pin SOIC implementation to support faster component selection and first-pass hardware planning.

Bộ thay thế dễ dàng lắp đặt cho MAX3488EESA+T — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3488EESA+T (cùng hình factor và footprint) — khác nhau ở Package, Driver Count, Receiver Count, Supported Standards, Communication Mode.

Analog Devices
Package: 8-pin NSOIC
So sánh với MAX3488EESA+T →
Analog Devices
Package: 8-pin NSOIC
So sánh với MAX3488EESA+T →
Analog Devices
Supported Standards: RS-422 and RS-485
So sánh với MAX3488EESA+T →
Maxim Integrated
Package: 8-pin NSOIC
Driver Count: 1
Receiver Count: 1
So sánh với MAX3488EESA+T →

MAX3488ECSA+

✅ Drop-In
Analog Devices
📦 8-pin SOIC
3.3 V · 3 V to 3.6 V · 12 Mbps · ±15 kV · 1 driver · 1 receiver · RS-485 and RS-422 · Slew-rate-limited true transceiver

Liên hệ để biết giá

Xem tài liệu →

MAX3488EESA+

✅ Drop-In
Maxim Integrated
📦 8-pin SOIC
RS-485/RS-422 transceiver · 3.3 V · 12 Mbps · ±15 kV · 1 · 1 · True differential RS-485/RS-422 · Slew-rate limited

Liên hệ để biết giá

Xem tài liệu →

MAX3488EESA+T Thông số kỹ thuật

Product Type RS-485/RS-422 transceiver
Điện áp cung cấp 3.3 V
Operating Supply Voltage Range 3 V to 3.6 V
Maximum Data Rate 12 Mbps
ESD Protection ±15 kV
Driver Count 1 driver
Receiver Count 1 receiver
Supported Standards RS-485 and RS-422
Driver Slew Rate Slew-rate limited
Communication Mode Half-duplex
Hộp 8-pin SOIC
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân MAX3488EESA+T 8-pin soic

Cấu hình chân cho MAX3488EESA+T (8-pin soic gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.

Bảng cấu hình chân 8-pin soic cho MAX3488EESA+T

Không có dữ liệu chân cụ thể sẵn có cho MAX3488EESA+T.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MAX3488EESA+T phù hợp cho 6 Áp dụngs: Industrial RS-485 Control Networks, Building Automation and HVAC Equipment, Factory Data-Acquisition Modules, Remote Instrumentation, Communication Gateways, Security and Access-Control Panels.

🏭

Industrial RS-485 Control Networks

MAX3488EESA+T fits 3.3 V industrial control modules that exchange commands and status over a balanced RS-485 bus. Its 12 Mbps capability provides substantial margin for short factory links, while the slew-rate-limited driver helps reduce unwanted high-frequency energy and reflections. The ±15 kV ESD protection is valuable at cabinet and machine-edge connectors where cables may be connected during maintenance. A designer should still use a biasing network, establish the driver-enable protocol, and verify termination against the selected bus topology.

🏭

Building Automation and HVAC Equipment

The MAX3488EESA+T is appropriate for building-automation controllers, room modules, and HVAC equipment that use a 3.3 V controller and a wired RS-485 field bus. Its one-driver/one-receiver arrangement supports a shared cable pair, while the 12 Mbps rate comfortably exceeds the data rates normally required for environmental monitoring and actuator commands. Protect the external line through appropriate connector-side surge protection, maintain a consistent enable convention, and avoid leaving multiple transmitters active during receive windows.

📟

Factory Data-Acquisition Modules

MAX3488EESA+T can connect a compact data-acquisition module to industrial sensors and controllers over a wired RS-485 network. The 3 V to 3.6 V operating range aligns with modern embedded control logic, and the 12 Mbps capability supports high burst rates without requiring a separate high-voltage transceiver. For reliable operation, separate logic and cable grounds according to the installation strategy, use a twisted differential pair, and apply termination only where the network topology requires it. External surge devices remain appropriate for cables exposed beyond the enclosure.

🔧

Remote Instrumentation

MAX3488EESA+T suits remote sensor and instrumentation nodes that need a compact, low-power balanced transceiver. The 3.3 V architecture simplifies integration with low-voltage processors, while one driver and one receiver support half-duplex operation over a single cable pair. The 12 Mbps rate gives designers flexibility across laboratory, agricultural, and environmental monitoring networks. Firmware should serialize access to the shared bus, and the hardware should include defined enable states and fault-safe behavior so a reset or disconnected controller does not block other nodes.

🌐

Communication Gateways

MAX3488EESA+T is useful in gateways that bridge a legacy RS-485 field network to a modern embedded Ethernet platform. Its 12 Mbps rate handles the field-side traffic required by common supervisory control and data-acquisition systems, while the 3.3 V supply simplifies integration with current-generation logic. A gateway must implement media access control, line biasing, termination, and controlled driver-enable timing. Keep the balanced trace pair away from switching-power nodes and use the manufacturer's recommended grounding arrangement when connecting the field cable.

🔐

Security and Access-Control Panels

MAX3488EESA+T can support access-control panels, door controllers, and security peripherals connected through a wired RS-485 or RS-422 network. Its ±15 kV ESD protection is useful at panel connectors, and the 3.3 V operation fits compact embedded control boards. Designers should separate the communications pair from security-sensitive analog circuitry, maintain defined logic states during reset, and use appropriate surge protection for cables that leave the controlled enclosure. For installations with long outdoor runs, an isolated transceiver architecture may provide additional galvanic protection.

What are the key specifications of MAX3488EESA+T that engineers should know?
The MAX3488EESA+T is a 3.3 V, half-duplex RS-485/RS-422 transceiver rated for data rates up to 12 Mbps with ±15 kV ESD protection. It contains one driver and one receiver and comes in an 8-pin SOIC package. According to the Analog Devices MAX3488E product information, the device uses slew-rate-limited signaling to reduce unwanted high-frequency content and reflections, making it suitable for industrial balanced-wire communication links operating from 3 V to 3.6 V.
Where can I download the MAX3488EESA+T datasheet PDF?
The official MAX3488EESA+T documentation is available through the Analog Devices MAX3488E product page at https://www.analog.com/en/products/max3488e.html. The manufacturer page identifies the MAX3488E family as a production 3.3 V, ±15 kV ESD-protected, 12 Mbps slew-rate-limited RS-485/RS-422 transceiver family. Use the datasheet linked from that page for the authoritative pin description, electrical characteristics, and application information.
Where can I find the MAX3488EESA+T pinout?
The MAX3488EESA+T pin assignment is identified in the manufacturer's MAX3488E datasheet, available from the Analog Devices product page. The device uses an 8-pin SOIC package, but individual pin numbers and names are not reproduced on this page because the manufacturer page summary does not expose that table. Before assigning PCB tracks or transceiver-enable logic, consult the pin-description and typical-application diagrams in the official manufacturer datasheet.
Where can I buy MAX3488EESA+T online?
The MAX3488EESA+T can be requested through the Request a Quote form on this page for current commercial availability and lot-oriented purchasing. The manufacturer identifies MAX3488E as a production device, and product listings confirm the exact MAX3488EESA+T order code in an 8-SOIC package. Submit the required quantity, target date, and delivery location with the quote request to obtain current supply and lead-time confirmation.
What is the price of MAX3488EESA+T?
The current MAX3488EESA+T commercial terms are available through the Request a Quote form on this page. Requesting a quote allows quantity, shipment destination, and purchasing schedule to be considered together without publishing a static figure that may quickly become outdated. The same form can be used to confirm minimum order quantity, allocation, and the expected delivery schedule for the exact 8-pin SOIC order code.
What is the lead time for MAX3488EESA+T?
Lead time for MAX3488EESA+T should be confirmed through the Request a Quote form on this page. The manufacturer's MAX3488E product page identifies the family as production, but production status alone does not establish current inventory or a shipment interval for a particular quantity. Include the required delivery date and annual usage in the request so the supplier can provide the most relevant allocation and lead-time response.
Is MAX3488EESA+T currently in stock?
Current stock for MAX3488EESA+T is confirmed through the Request a Quote form on this page. The exact order code is listed in production with a 3.3 V supply, 12 Mbps capability, ±15 kV ESD protection, and an 8-pin SOIC package. Stock status can vary by package code and quantity, so specify the complete MAX3488EESA+T MPN and requested quantity when requesting an availability update.
What is the difference between MAX3488EESA+T and MAX3488ECSA?
MAX3488EESA+T and MAX3488ECSA belong to the same MAX3488E 3.3 V transceiver family and use the same 8-pin SOIC footprint, while their ordering suffixes distinguish their commercial configurations. The MAX3488EESA+T form includes the tape-and-reel order suffix, whereas MAX3488ECSA is identified separately in the family comparison material. Confirm the exact temperature grade, terminal finish, and packing code against the manufacturer ordering information before treating either part as a production substitute.
When should I choose MAX3488EESA+T over another MAX3488E order code?
Choose MAX3488EESA+T when the production design requires the exact MAX3488EESA 8-pin SOIC configuration and tape-and-reel presentation. It provides the family's 3.3 V operation, 12 Mbps data rate, ±15 kV ESD protection, one driver, one receiver, and slew-rate-limited output. Another same-package order code may be appropriate when a different temperature grade or commercial packing form is explicitly required by the BOM and distribution channel.
Is MAX3488EESA+T suitable for RS-485 industrial networks?
Yes, MAX3488EESA+T is suitable for 3.3 V RS-485 industrial networks when its 12 Mbps data rate, ±15 kV ESD protection, and half-duplex one-driver/one-receiver architecture meet the system requirements. The Analog Devices product information confirms true RS-485/RS-422 operation and slew-rate-limited signaling. Bus population, cable length, termination, grounding, and fault behavior must still be validated against the complete network design.
What is the best drop-in replacement for MAX3488EESA+T?
The closest same-package replacement is MAX3488ECSA because both belong to the MAX3488E family and use the 8-pin SOIC footprint. The distinguishing ordering information must still be checked for temperature grade and packing. The cross-reference search did not identify five additional function-compatible, pin-compatible drop-in devices, so other MAX3483E, MAX3485E, MAX3486E, MAX3490E, or MAX3491E family members are not presented as drop-in alternatives without individual pinout verification.
Can MAX3488ECSA replace MAX3488EESA+T?
MAX3488ECSA is a same-family, same-package candidate for MAX3488EESA+T because both are MAX3488E devices in an 8-pin SOIC package. Their order codes indicate different commercial configurations, so engineers should confirm temperature range, ESD rating, lifecycle status, and tape-and-reel requirements before approving the substitution. PCB compatibility is strongest when the manufacturer confirms that the selected suffix has the same pinout and electrical configuration.
What can replace MAX3488EESA+T?
MAX3488ECSA is the documented same-family alternative for a MAX3488EESA+T replacement review. It shares the MAX3488E 3.3 V, 12 Mbps, ±15 kV ESD-protected RS-485/RS-422 architecture and the 8-pin SOIC package. Approval should also account for temperature grade, ordering suffix, component availability, and qualification requirements. The cross-reference results do not establish a cross-manufacturer drop-in equivalent, so a different-brand substitution should not be assumed.
Is MAX3488EESA+T the same as MAX3485EESA+T?
No. MAX3485EESA+T and MAX3488EESA+T are related Maxim Integrated transceiver products, but their channel arrangements and operating characteristics are not automatically interchangeable. The family listing identifies both as 3.3 V low-power RS-485/RS-422 transceivers, yet an RS-485 link requires an exact match of driver, receiver, enable-control, and connector pin assignments. Use the pin-description diagram for each exact part before considering a board-level substitution.
What is the best Analog Devices equivalent for MAX3488EESA+T?
The best documented Analog Devices family candidate is MAX3488ECSA, which shares the MAX3488E 8-pin SOIC configuration and the same 12 Mbps, 3.3 V, ±15 kV ESD-protected transceiver positioning. The ordering suffix still matters: confirm temperature grade, tape-and-reel status, and lifecycle in the manufacturer's product documentation. For another manufacturer's equivalent, the available cross-reference results do not identify a verified pin-compatible part, so qualification requires a separate manufacturer comparison.

Dữ liệu tham khảo kỹ thuật cho MAX3488EESA+T — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose MAX3488EESA+T for a production 3.3 V RS-485/RS-422 design that requires one driver, one receiver, a 12 Mbps data rate, ±15 kV ESD protection, slew-rate-limited signaling, and an 8-pin SOIC package in tape-and-reel form. Choose MAX3488ECSA when its documented ordering and temperature configuration matches the production BOM and the required packing method, after confirming the suffix against the manufacturer's ordering guide. MAX3488EESA without the +T suffix is the closest ordering alternative but may require a different incoming-receipt format. The related MAX3485EESA+T should not be treated as an automatic drop-in because channel configuration and control-pin behavior require individual verification. No cross-manufacturer drop-in part was established by the cross-reference results; any such candidate must be checked for pinout, logic levels, timing, fail-safe behavior, ESD capability, and package dimensions before substitution.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MAX3488ECSA MAX3488EESA
Manufacturer Analog Devices Analog Devices Analog Devices
Package 8-pin SOIC 8-pin SOIC - same package 8-pin SOIC - same package
Product Type RS-485/RS-422 transceiver RS-485/RS-422 transceiver RS-485/RS-422 transceiver
Supply Voltage 3.3 V 3.3 V 3.3 V
Maximum Data Rate 12 Mbps 12 Mbps 12 Mbps
ESD Protection ±15 kV ±15 kV ±15 kV
Driver and Receiver Count 1 driver and 1 receiver 1 driver and 1 receiver 1 driver and 1 receiver
Driver Configuration Slew-rate limited Slew-rate limited Slew-rate limited

Bảo phân biệt quan trọng

  • Maintains the MAX3488E electrical configuration in an 8-pin SOIC footprint (vsMAX3488ECSA)
  • Provides the exact tape-and-reel order configuration identified by the target MPN (vsMAX3488EESA)
  • Combines 12 Mbps operation with high-level integrated ESD protection (vsMAX3485EESA+T)

Ghi chú thiết kế

Route the RS-485/RS-422 pair as a tightly coupled differential pair with substantially equal trace lengths and a continuous ground reference beneath the pair. Place the MAX3488EESA+T close to the board connector or protection network to minimize the distance over which transient energy can couple into the transceiver. Keep switching-regulator paths and high-current return paths away from the balanced lines, and avoid adding ground-plane breaks beneath either conductor.

Do not enable the driver continuously on a half-duplex multidrop bus. Firmware and hardware must guarantee that only one transmitter is active at a time, while the receiver remains available when appropriate. Verify fail-safe output states during reset and power loss because multiple floating drivers could contend for the bus. Also confirm whether the design uses RS-485 or RS-422 wiring, because termination and grounding practices differ between point-to-point and multidrop networks.

The slew-rate-limited MAX3488EESA+T driver helps reduce high-frequency harmonics and ringing, but cable topology still determines EMI performance. Use the manufacturer's recommended termination and fail-safe biasing arrangement, and avoid placing long stubs on a multidrop bus. If a cable leaves an enclosure or crosses between buildings, add appropriately rated external surge and lightning protection; the integrated ±15 kV ESD capability is not a substitute for a complete cable-protection network.

Decouple the 3.3 V supply close to the device and follow the manufacturer datasheet for the required capacitor network and layout. Confirm that the supply remains within 3 V to 3.6 V during startup, load changes, and disturbance on an industrial bus. Evaluate driver current and cable loading against the transceiver's output-current limit, and ensure that any protection device does not add excessive capacitance or disturb the intended edge rate.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer product-page summary identifies MAX3488E as a production device but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. No automotive qualification designation is stated.

Dữ liệu được xác minh vào: 2026-11-09 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MAX3488EESA+T datasheet MAX3488EESA+T pinout MAX3488EESA+T datasheet pdf MAX3488EESA+T equivalent MAX3488EESA+T replacement MAX3488EESA+T cross reference MAX3488EESA+T price MAX3488EESA+T stock Analog Devices MAX3488EESA+T MAX3488EESA+T RS-485 transceiver MAX3488EESA+T 12Mbps 3.3V MAX3488EESA+T SOIC-8 pinout MAX3488EESA+T industrial network MAX3488EESA+T vs MAX3485EESA+T

Các bộ phận và thuật ngữ liên quan

Analog Devices Maxim Integrated MAX3488EESA+T MAX3488EESA MAX3488ECSA MAX3485EESA+T MAX3488E RS-485 RS-422 transceiver half-duplex transceiver line driver line receiver slew-rate-limited driver ESD protection 3.3 V power supply 12 Mbps data rate 8-pin SOIC surface-mount package industrial automation building automation data acquisition differential signaling semiconductor
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ