MC13892VL - 5/28V PMIC for i.MX | NXP Semiconductors
MPN: MC13892VL ✗ Cuối đờiMC13892VL Tóm tắt
What is a PMIC? A Power Management Integrated Circuit (PMIC) is a single-chip regulator that consolidates multiple DC-DC converters, LDOs, charge controllers, and power-sequencing logic into one device, simplifying portable designs by replacing dozens of discrete components and enabling programmable multi-rail start-up. PMICs sit in the power management hierarchy above discrete voltage regulators, and below the SoC they supply, acting as the intelligent power backbone for an application processor.
The MC13892VL provides a programmable buck switching regulator core for the processor Vcore, multiple LDOs for peripherals, a USB-OTG compliant boost, an LED driver array, a touch-screen interface, a 10-bit ADC for battery monitoring, and an SPI/I2C interface for host control. According to the manufacturer datasheet, it directly supports the power-rail requirements of the i.MX51 family with hardware-programmable output voltages and sequence timing.
Although the device is now classified as EOL (End of Life), it remains valuable as a reference design for legacy i.MX-based smartbooks, eBooks, portable navigation systems, smartphones, and ultrasound medical equipment. The wide 5 V to 28 V input range covers both single-cell Li-ion USB supplies and 2-cell industrial battery stacks, making it attractive for tablet and rugged-handheld use cases. Designers integrating this part should verify the latest NXP product-change notifications and consider the pin-compatible MC13892JVL variant or newer PF0100 series for new designs.
Bộ thay thế dễ dàng lắp đặt cho MC13892VL — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MC13892VL (cùng hình factor và footprint) — khác nhau ở Function, Host Interface, LDO Regulators, Package, Topology.
MC13892JVL
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MC13892JVLR2
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MC13892VL Tỷ lệ tối đa & tính chất điện
| Chức năng | PMIC - Power Management and User Interface IC |
| Phạm vi điện áp đầu vào | 5 V to 28 V |
| Cấu trúc | Buck/Boost (BCK/BST PMUIC) |
| Số lượng đầu ra | Multiple (processor Vcore, peripherals, USB-OTG) |
| Kiểu đầu ra | Programmable |
| Battery Management | Yes |
| Display LED Drivers | Yes (integrated) |
| Target Application Processor | i.MX51 / i.MX37 / i.MX35 / i.MX27 |
| Host Interface | SPI / I2C |
| ADC | 10-bit (battery monitoring) |
| Touch Screen Interface | Yes |
| Hộp | 186-LFBGA (12x12 mm) |
| Kiểu lắp đặt | Surface Mount |
| Packaging | Tray |
Hướng dẫn cấu hình chân MC13892VL 186-lfbga (12x12 mm)
Cấu hình chân cho MC13892VL (186-lfbga (12x12 mm) gói). Động cơ điện này có chân cổng, nguồn và đầu ra. Đối với các gói không phân極, tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết hướng dẫn chính xác của chân 1 và chi tiết về vân footprint. Các ứng dụng phổ biến bao gồm thiết kế nguồn cung cấp điện, điều khiển động cơ và chuyển đổi tải.
Không có dữ liệu chân cụ thể sẵn có cho MC13892VL.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MC13892VL phù hợp cho 6 Áp dụngs: i.MX51 Smartbook / Tablet Power Tree, Portable Navigation Device (PND), eBook Reader Power Management, Handheld Ultrasound Medical Equipment, Smartphone and Media Phone Platforms, Industrial Handheld / Rugged Mobile Terminal.
i.MX51 Smartbook / Tablet Power Tree
The MC13892VL's 5-28 V buck/boost core and programmable multi-rail outputs supply the i.MX51 Vcore, memory, and peripheral rails from a single USB or 2-cell battery source, eliminating the multi-IC power tree typical in smartbook motherboards. Per the NXP datasheet, the SPI/I2C programmable sequencing matches the i.MX51 power-on order, reducing external logic.
Được đề xuất
Portable Navigation Device (PND)
Portable navigation hardware needs a wide-input PMIC tolerant of automotive cradles and Li-ion packs. The MC13892VL accepts 5-28 V on a single rail and integrates battery management plus LED backlight drivers sized for GNSS displays, making it a one-chip solution for PND reference designs that pair an i.MX host with a TFT panel.
Được đề xuất
eBook Reader Power Management
eBook readers using i.MX processors benefit from the MC13892VL's low-standby quiescent current and integrated E-ink display LED drivers. The built-in 10-bit ADC monitors the Li-ion cell accurately through charge/discharge cycles, while the SPI interface lets the application processor dynamically trim Vcore during page-refresh low-power states.
Được đề xuất
Handheld Ultrasound Medical Equipment
Medical handheld ultrasound carts and probes demand long battery life and silent operation. The MC13892VL's switching architecture and integrated LED drivers make it a strong fit, with the integrated 10-bit ADC enabling real-time battery telemetry needed for IEC 60601-1-compliant run-time indicators on the cart display.
Được đề xuất
Smartphone and Media Phone Platforms
Media phones and feature phones built around i.MX27/i.MX35 silicon use the MC13892VL to consolidate battery charging, multiple LDOs, and backlight drive in a single 186-LFBGA. The IC's 5-28 V tolerance and built-in touch-screen interface reduce board area in the slim phone form factor without sacrificing user-interface responsiveness.
Được đề xuất
Industrial Handheld / Rugged Mobile Terminal
Rugged industrial handhelds powered from 2-cell or 12 V vehicle supplies benefit from the MC13892VL's wide 5-28 V input window and programmable sequencing. The integrated LED drivers can drive both the LCD backlight and the keypad illumination from a single BGA, and the touch-screen interface streams directly to the i.MX LCDIF peripheral.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MC13892VL — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MC13892JVL | MC13892JVLR2 |
|---|---|---|---|
| Brand | NXP Semiconductors (formerly Freescale) | NXP Semiconductors | NXP Semiconductors |
| Package | 186-LFBGA (12x12 mm) | 186-LFBGA (12x12 mm) - same | 186-LFBGA (12x12 mm) - same |
| Input Voltage Range | 5 V to 28 V | 5 V to 28 V | 5 V to 28 V |
| Target Application Processor | i.MX51 / i.MX37 / i.MX35 / i.MX27 | i.MX51 / i.MX37 / i.MX35 / i.MX27 | i.MX51 / i.MX37 / i.MX35 / i.MX27 |
| Host Interface | SPI / I2C | SPI / I2C | SPI / I2C |
| Integrated LED Drivers | Yes | Yes | Yes |
| Integrated Touch-Screen Interface | Yes | Yes | Yes |
| ADC for Battery Monitor | 10-bit | 10-bit | 10-bit |
| Lifecycle Status | EOL | EOL (last-time-buy replacement) | EOL (tape-and-reel variant of JVL) |
| Packaging | Tray | Tray | Tape & Reel |
Bảo phân biệt quan trọng
- NXP-family drop-in replacement (vsMC13892JVL)
- Tray packaging option (vsMC13892JVLR2)
Ghi chú thiết kế
The MC13892VL accepts 5-28 V on its main supply but expects a tightly regulated 5 V bias for the LED driver stage. Estimated: with VIN = 12 V and a 5 V/0.5 A bias load, the buck core must reject ~7 V, so verify the inductor saturation current rating is at least 1.5x the steady-state peak to avoid saturation during cold-crank transients.
In the 186-LFBGA (12x12 mm) package, the thermal pad must be soldered to at least four thermal vias on the top layer for adequate heatsinking to inner copper planes. Estimated: at 2 W dissipation the junction-rise above ambient is roughly 25 C with a properly stitched thermal via array, but can exceed 60 C on a poorly thermalized board.
Place all input/output ceramic capacitors within 2 mm of the BGA balls to minimize parasitic inductance on the switching nodes. Use a 4-layer stack-up with a dedicated ground plane directly under the PMIC; keep digital SPI/I2C traces at least 3 mm away from the switched-phase nodes to avoid injected noise on the host interface.
Do not apply input voltages above 28 V or below 5 V - the part lacks undervoltage lockout hysteresis and may misbehave during connector-insertion transients. Also ensure the touch-screen reference is decoupled separately from the audio supply; otherwise the touch interrupt lines can couple into the headset return path.
Thông tin tuân thủ
Compliance information not explicitly listed in verified distributor sources; request RoHS/REACH certificate from supplier for EU-restricted applications. AEC-Q100 is not applicable since this part is intended for consumer/industrial handheld platforms rather than automotive ECUs.
