MC13892VL - 5/28V PMIC for i.MX | NXP Semiconductors
料号： MC13892VL ✗ 停产| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $14.5 | $14.50 |
| 10 | $13.2 | $132.00 |
| 100 | $11.95 | $1,195.00 |
| 500 | $10.8 | $5,400.00 |
| 1,000 | $9.75 | $9,750.00 |
MC13892VL 概述
What is a PMIC? A Power Management Integrated Circuit (PMIC) is a single-chip regulator that consolidates multiple DC-DC converters, LDOs, charge controllers, and power-sequencing logic into one device, simplifying portable designs by replacing dozens of discrete components and enabling programmable multi-rail start-up. PMICs sit in the power management hierarchy above discrete voltage regulators, and below the SoC they supply, acting as the intelligent power backbone for an application processor.
The MC13892VL provides a programmable buck switching regulator core for the processor Vcore, multiple LDOs for peripherals, a USB-OTG compliant boost, an LED driver array, a touch-screen interface, a 10-bit ADC for battery monitoring, and an SPI/I2C interface for host control. According to the manufacturer datasheet, it directly supports the power-rail requirements of the i.MX51 family with hardware-programmable output voltages and sequence timing.
Although the device is now classified as EOL (End of Life), it remains valuable as a reference design for legacy i.MX-based smartbooks, eBooks, portable navigation systems, smartphones, and ultrasound medical equipment. The wide 5 V to 28 V input range covers both single-cell Li-ion USB supplies and 2-cell industrial battery stacks, making it attractive for tablet and rugged-handheld use cases. Designers integrating this part should verify the latest NXP product-change notifications and consider the pin-compatible MC13892JVL variant or newer PF0100 series for new designs.
直接替换替代料： MC13892VL ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： MC13892VL （相同外形与封装尺寸） ——差异在于 Function, Host Interface, LDO Regulators, Package, Topology.
快速对比工具——选择替代料号进行并排对比：
MC13892JVL
✅ 直接替换✓ 有现货
$7.65 / 个
查看数据手册 →MC13892JVLR2
✅ 直接替换✓ 有现货
$3.65 / 个
查看数据手册 →MC13892VL 最大额定值与电气特性
| 功能 | PMIC - Power Management and User Interface IC |
| 输入电压范围 | 5 V to 28 V |
| 拓扑 | Buck/Boost (BCK/BST PMUIC) |
| 输出数量 | Multiple (processor Vcore, peripherals, USB-OTG) |
| 输出类型 | Programmable |
| Battery Management | Yes |
| Display LED Drivers | Yes (integrated) |
| Target Application Processor | i.MX51 / i.MX37 / i.MX35 / i.MX27 |
| Host Interface | SPI / I2C |
| ADC | 10-bit (battery monitoring) |
| Touch Screen Interface | Yes |
| 封装 | 186-LFBGA (12x12 mm) |
| 安装类型 | Surface Mount |
| Packaging | Tray |
MC13892VL 186-lfbga (12x12 mm) 引脚配置指南
MC13892VL（186-lfbga (12x12 mm) 封装）的引脚配置。 该功率器件具有栅极、漏极和源极端子。对于无极性封装，请参阅制造商数据手册以了解确切的引脚 1 方向和封装尺寸细节。常见应用包括电源设计、电机驱动和负载开关。
暂无详细引脚数据： MC13892VL.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MC13892VL 适用于 6 应用s: i.MX51 Smartbook / Tablet Power Tree, Portable Navigation Device (PND), eBook Reader Power Management, Handheld Ultrasound Medical Equipment, Smartphone and Media Phone Platforms, Industrial Handheld / Rugged Mobile Terminal.
i.MX51 Smartbook / Tablet Power Tree
The MC13892VL's 5-28 V buck/boost core and programmable multi-rail outputs supply the i.MX51 Vcore, memory, and peripheral rails from a single USB or 2-cell battery source, eliminating the multi-IC power tree typical in smartbook motherboards. Per the NXP datasheet, the SPI/I2C programmable sequencing matches the i.MX51 power-on order, reducing external logic.
推荐
Portable Navigation Device (PND)
Portable navigation hardware needs a wide-input PMIC tolerant of automotive cradles and Li-ion packs. The MC13892VL accepts 5-28 V on a single rail and integrates battery management plus LED backlight drivers sized for GNSS displays, making it a one-chip solution for PND reference designs that pair an i.MX host with a TFT panel.
推荐
eBook Reader Power Management
eBook readers using i.MX processors benefit from the MC13892VL's low-standby quiescent current and integrated E-ink display LED drivers. The built-in 10-bit ADC monitors the Li-ion cell accurately through charge/discharge cycles, while the SPI interface lets the application processor dynamically trim Vcore during page-refresh low-power states.
推荐
Handheld Ultrasound Medical Equipment
Medical handheld ultrasound carts and probes demand long battery life and silent operation. The MC13892VL's switching architecture and integrated LED drivers make it a strong fit, with the integrated 10-bit ADC enabling real-time battery telemetry needed for IEC 60601-1-compliant run-time indicators on the cart display.
推荐
Smartphone and Media Phone Platforms
Media phones and feature phones built around i.MX27/i.MX35 silicon use the MC13892VL to consolidate battery charging, multiple LDOs, and backlight drive in a single 186-LFBGA. The IC's 5-28 V tolerance and built-in touch-screen interface reduce board area in the slim phone form factor without sacrificing user-interface responsiveness.
推荐
Industrial Handheld / Rugged Mobile Terminal
Rugged industrial handhelds powered from 2-cell or 12 V vehicle supplies benefit from the MC13892VL's wide 5-28 V input window and programmable sequencing. The integrated LED drivers can drive both the LCD backlight and the keypad illumination from a single BGA, and the touch-screen interface streams directly to the i.MX LCDIF peripheral.
推荐
推荐产品汇总
工程参考数据： MC13892VL ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MC13892JVL | MC13892JVLR2 |
|---|---|---|---|
| Brand | NXP Semiconductors (formerly Freescale) | NXP Semiconductors | NXP Semiconductors |
| Package | 186-LFBGA (12x12 mm) | 186-LFBGA (12x12 mm) - same | 186-LFBGA (12x12 mm) - same |
| Input Voltage Range | 5 V to 28 V | 5 V to 28 V | 5 V to 28 V |
| Target Application Processor | i.MX51 / i.MX37 / i.MX35 / i.MX27 | i.MX51 / i.MX37 / i.MX35 / i.MX27 | i.MX51 / i.MX37 / i.MX35 / i.MX27 |
| Host Interface | SPI / I2C | SPI / I2C | SPI / I2C |
| Integrated LED Drivers | Yes | Yes | Yes |
| Integrated Touch-Screen Interface | Yes | Yes | Yes |
| ADC for Battery Monitor | 10-bit | 10-bit | 10-bit |
| Lifecycle Status | EOL | EOL (last-time-buy replacement) | EOL (tape-and-reel variant of JVL) |
| Packaging | Tray | Tray | Tape & Reel |
关键差异点
- NXP-family drop-in replacement （对比 MC13892JVL)
- Tray packaging option （对比 MC13892JVLR2)
设计说明
The MC13892VL accepts 5-28 V on its main supply but expects a tightly regulated 5 V bias for the LED driver stage. Estimated: with VIN = 12 V and a 5 V/0.5 A bias load, the buck core must reject ~7 V, so verify the inductor saturation current rating is at least 1.5x the steady-state peak to avoid saturation during cold-crank transients.
In the 186-LFBGA (12x12 mm) package, the thermal pad must be soldered to at least four thermal vias on the top layer for adequate heatsinking to inner copper planes. Estimated: at 2 W dissipation the junction-rise above ambient is roughly 25 C with a properly stitched thermal via array, but can exceed 60 C on a poorly thermalized board.
Place all input/output ceramic capacitors within 2 mm of the BGA balls to minimize parasitic inductance on the switching nodes. Use a 4-layer stack-up with a dedicated ground plane directly under the PMIC; keep digital SPI/I2C traces at least 3 mm away from the switched-phase nodes to avoid injected noise on the host interface.
Do not apply input voltages above 28 V or below 5 V - the part lacks undervoltage lockout hysteresis and may misbehave during connector-insertion transients. Also ensure the touch-screen reference is decoupled separately from the audio supply; otherwise the touch interrupt lines can couple into the headset return path.
合规信息
Compliance information not explicitly listed in verified distributor sources; request RoHS/REACH certificate from supplier for EU-restricted applications. AEC-Q100 is not applicable since this part is intended for consumer/industrial handheld platforms rather than automotive ECUs.
