onsemi

MC14051BF 8:1 Analog Multiplexer, 280 Ohm, 16-Pin SOIC | onsemi

MPN: MC14051BF ✓ Hoạt động
3 V to 18 V Vdss Very low OFF leakage current Id 280 ohm Rds(on) 16-pin SO EIAJ Package
MOQ: 1 |

MC14051BF Tóm tắt

onsemi MC14051BF is an 8:1 analog multiplexer and demultiplexer implemented as a digitally controlled analog switch. The device supports signal routing over a 3 V to 18 V supply range, features approximately 280 ohm ON resistance, and is packaged in a 16-pin SO EIAJ package. It is designed for selecting one of eight analog or digital signal paths through three binary control inputs, making it suitable for instrumentation, data acquisition, communication equipment, and control systems.

An analog multiplexer is an interface IC that routes multiple signal sources to a common output or distributes one signal among multiple destinations. The MC14051B family uses CMOS-style bilateral switches, allowing analog signals to be handled across the operating supply range. In multiplex mode, three select inputs determine which of the eight channels connects to the common terminal. In demultiplex mode, the common terminal drives the selected channel, depending on the external circuit configuration and signal direction.

The MC14051BF provides low ON impedance and very low OFF leakage current. The manufacturer describes the MC14051B, MC14052B, and MC14053B as digitally controlled analog switches, with the MC14051B implementing an SP8T solid-state switch. The low switching resistance is useful when connecting higher-impedance sensors, measurement inputs, or low-frequency control signals to a shared analog-to-digital converter or instrumentation amplifier.

Because the common and channel terminals are bilateral switch paths, the device can be used for signal multiplexing, signal distribution, and circuit isolation. The three select inputs are decoded internally to select one of eight channels. Designers should ensure that select transitions do not create unacceptable transients when the connected signals can change rapidly, and they should account for off-channel leakage and parasitic capacitance when precision measurements are required.

The MC14051BF is identified by onsemi with an operating temperature range of -55 °C to +125 °C in distributor listings and a 16-pin SO EIAJ package. The device is commonly used with 3 V, 5 V, 12 V, and 18 V supply systems. Its broad supply range and CMOS control interface make it suitable for industrial instrumentation, test and measurement, communication interfaces, audio routing, and embedded control systems.

For PCB implementation, place the device close to the multiplexed signal source and the receiving circuit to minimize trace capacitance and analog crosstalk. Keep the common and channel routing reasonably short, provide a stable supply connection, and observe the manufacturer’s input voltage limits. The select logic should be driven by compatible CMOS logic and changed only after considering the signal states present on the connected channels. This page summarizes the manufacturer’s device description, distributor specifications, package information, application considerations, and verified replacement references for MC14051BF evaluation.

Bộ thay thế dễ dàng lắp đặt cho MC14051BF — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

MC14051BDR2G

✅ Drop-In
📦 16-pin SO EIAJ
Same 16-pin SO EIAJ package and MC14051B SP8T function; ordering-code suffix details require final datasheet verification.

📋 Tham chiếu thay thế (không có trong danh mục)

MC14051BDG

✅ Drop-In
📦 16-pin SO EIAJ
Same 16-pin SO EIAJ package and MC14051B 8:1 function; packing suffix differs from MC14051BF.

📋 Tham chiếu thay thế (không có trong danh mục)

MC14051BFEL

✅ Drop-In
📦 16-pin SO EIAJ
Same MC14051BF family and 16-pin footprint; EL ordering-code characteristics require manufacturer confirmation.

📋 Tham chiếu thay thế (không có trong danh mục)

MC14051BF Thông số kỹ thuật

Device Type 8:1 analog multiplexer and demultiplexer
Switch Configuration SP8T
Number of Channels 8 channels
ON Resistance 280 ohm
Supply Voltage Range 3 V to 18 V
Control Inputs 3 binary select inputs
Signal Type Analog or digital
Switch Direction Bilateral analog switching
Khoảng nhiệt độ hoạt động -55 °C to +125 °C
Hộp 16-pin SO EIAJ
Kiểu lắp đặt Surface mount
Technology CMOS analog switch
ON Impedance Low ON impedance
OFF Leakage Current Very low OFF leakage current
Lead-Free Packaging Pb-free packages available
Pin-for-Pin Compatibility Pin-for-pin replacement for CD4051, CD4052, and CD4053 families
Data Sheet Publication Number MC14051B/D

Cấu hình chân MC14051BF

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
Chân 1 IN3 — Analog input/output channel 3
Chân 2 IN0 — Analog input/output channel 0
Chân 3 IN1 — Analog input/output channel 1
Chân 4 IN2 — Analog input/output channel 2
Chân 5 VEE — Negative analog supply or ground reference
Chân 6 IN7 — Analog input/output channel 7
Chân 7 IN6 — Analog input/output channel 6
Chân 8 IN5 — Analog input/output channel 5
Chân 9 S2 — Binary select input 2
Chân 10 S1 — Binary select input 1
Chân 11 S0 — Binary select input 0
Chân 12 IN4 — Analog input/output channel 4
Chân 13 COM — Common analog input/output terminal
Chân 14 IN8 — Analog input/output channel 8
Chân 15 VSS — Negative digital supply or ground reference
Chân 16 VDD — Positive supply voltage

Ứng dụng tiêu biểu

MC14051BF phù hợp cho 6 Áp dụngs: Multiplexed Sensor Front End, Data Acquisition and Test Systems, Industrial Control Signal Routing, Communication Signal Multiplexing, Audio and Low-Frequency Signal Selection, Portable and Battery-Powered Instruments.

🏭

Multiplexed Sensor Front End

The MC14051BF can route up to eight sensor outputs to one common analog input, reducing the number of ADC channels required in a measurement system. Its approximately 280 ohm ON resistance is practical when sensor and amplifier impedances are substantially higher, while the 3 V to 18 V supply range supports both low-voltage and industrial systems. Place the multiplexer near the sensor inputs, use short traces, and select the channel long enough for the ADC and associated filter to settle. If source impedance approaches the switch resistance, add a high-input-impedance buffer and include the switch's contribution to gain error in the calibration.

🔧

Data Acquisition and Test Systems

MC14051BF is suitable for instrument front ends that must sample multiple inputs with one ADC or measurement amplifier. The 8:1 arrangement and three binary select controls provide a straightforward channel-selection interface, while low OFF leakage helps isolate unselected sources. Designers should budget acquisition time for switching and filtering, use a consistent reference for all channels, and account for approximately 280 ohm ON resistance in the input network. Short common-terminal routing and guarded unused channels reduce leakage and crosstalk in precision measurements.

🏭

Industrial Control Signal Routing

The MC14051BF can select among eight analog control or feedback signals in industrial equipment while operating from a 3 V to 18 V supply. Its low ON impedance makes it useful for routing signals from transducers and conditioning stages into a common controller input. The wide -55 °C to +125 °C range supports demanding industrial environments, but system designers must still control ground offsets, protect external lines from transients, and prevent select transitions from creating control glitches. Use pull resistors where a defined select state is required during reset.

🌐

Communication Signal Multiplexing

MC14051BF can route one of eight low-frequency analog or logic signals through a common channel for communication equipment with controlled timing. Its SP8T arrangement and three select inputs simplify address decoding, while the approximately 280 ohm ON resistance is suitable when line drivers and receivers use impedances well above 300 ohm. Keep the selected path short and maintain a continuous ground reference to limit coupling. For high-speed signals, verify switching time, bandwidth, charge injection, and capacitance against the manufacturer's electrical characteristics before using this device.

🎧

Audio and Low-Frequency Signal Selection

The MC14051BF can select among eight audio-band or other low-frequency sources when the source impedance is high enough that the approximately 280 ohm ON resistance causes acceptable attenuation. It is useful in source-selection circuits, test fixtures, and compact analog routing systems. Keep the common path short, maintain low ground bounce, and avoid routing signals near high-current switching nodes. If the switch resistance would create audible level loss or channel imbalance, add a low-noise buffer rather than forcing the multiplexer to drive a low-impedance load.

📱

Portable and Battery-Powered Instruments

MC14051BF is useful in low-power portable instruments that need to monitor multiple analog channels without providing a dedicated front end for every source. Its ability to operate from a 3 V supply supports compatibility with low-voltage embedded systems, although the device is a conventional CMOS analog switch rather than a power-optimized analog switch. Evaluate leakage over the intended measurement interval and confirm whether a lower-leakage device is preferable for battery-powered electrochemical or high-impedance sensors. Firmware should also avoid changing the selected channel until prior conversions are complete.

Tóm tắt các sản phẩm được đề xuất

MC14051BDG Related onsemi multiplexer for design review Được sử dụng trong: Multiplexed Sensor Front End, Data Acquisition and Test Systems, Industrial Control Signal Routing, Communication Signal Multiplexing, Audio and Low-Frequency Signal Selection, Portable and Battery-Powered Instruments MC14051BDR2G Related onsemi multiplexer for alternate sourcing Được sử dụng trong: Multiplexed Sensor Front End, Industrial Control Signal Routing, Audio and Low-Frequency Signal Selection MC14051BFEL Same-family ordering-code alternative Được sử dụng trong: Data Acquisition and Test Systems, Communication Signal Multiplexing, Portable and Battery-Powered Instruments
What is the onsemi MC14051BF?
The MC14051BF is an 8:1 analog multiplexer and demultiplexer with three binary select inputs and a 16-pin SO EIAJ package. According to the onsemi datasheet, the MC14051B implements an SP8T solid-state switch and can route analog or digital signals across a 3 V to 18 V supply range. Its approximately 280 ohm ON resistance makes it useful for sharing measurement, sensor, control, and communication signals.
What is the operating voltage of MC14051BF?
The MC14051BF operates from 3 V to 18 V, as specified in onsemi product information and distributor listings. The supply voltage must remain within that range while keeping control and analog signal levels within the device's valid input limits. Its broad operating range supports 3 V, 5 V, 12 V, and 18 V systems, allowing the same multiplexer family to be used across low-voltage portable equipment and higher-voltage industrial instrumentation.
What is the ON resistance of MC14051BF?
The MC14051BF has approximately 280 ohm ON resistance when a channel is selected. ON resistance creates a voltage-divider effect when the source impedance and the connected load are not much larger than 280 ohm. For precision measurement, choose the surrounding amplifier input impedance and signal source impedance carefully, because the switch resistance contributes to gain error and can increase thermal noise.
How many channels can the MC14051BF select?
The MC14051BF selects one of eight channels using three select inputs. The three binary select lines decode the desired channel, while the common terminal connects to the selected input or output. The manufacturer describes this arrangement as an SP8T solid-state switch. In a typical multiplexer circuit, the eight signal inputs connect to channels 0 through 7 and the common terminal connects to the next stage, such as an ADC input.
Where can I download the MC14051BF datasheet PDF?
The official MC14051B datasheet is available from onsemi at https://www.onsemi.com/pdf/datasheet/mc14051b-d.pdf. The document identifies the publication order number as MC14051B/D and covers the MC14051B analog multiplexer family. Use the manufacturer datasheet for the authoritative pin description, electrical characteristics, timing information, recommended operating conditions, and package drawings before finalizing a PCB or replacement design.
Where can I find the MC14051BF pinout?
The MC14051BF pinout is shown in the onsemi MC14051B manufacturer datasheet, using the 16-pin SO EIAJ package drawing. The package contains three select inputs, eight channel terminals, a common terminal, VDD, VSS, and VEE-related power connections as defined for this family. Confirm every signal against the pin-description table and package drawing before assigning PCB nets, especially when using a different but related MC14051B ordering code.
Can MC14051BDR2G replace MC14051BF?
MC14051BDR2G is a same-manufacturer, 16-pin replacement candidate for MC14051BF, and cross-reference results identify consistent terminals, package, and functional characteristics. The manufacturer datasheet states that the MC14051B family is pin-for-pin compatible with the CD4051, CD4052, and CD4053 families. Before substitution, verify the exact ordering code, temperature grade, pin assignment, and supply limits against the manufacturer datasheet for the specific package variant.
Can MC14051BDG replace MC14051BF?
MC14051BDG is a same-manufacturer 16-pin alternative identified as a complete replacement candidate in cross-reference results. It uses the same SO EIAJ footprint and is associated with the same MC14051B function, including the eight-channel SP8T arrangement and three select inputs. Production designers should still confirm the exact suffix, temperature rating, tape-and-reel or tube packing arrangement, and current lifecycle status before approving the change.
What is the best drop-in replacement for MC14051BF?
MC14051BDR2G is the closest documented drop-in replacement candidate for MC14051BF because it is a 16-pin onsemi part with the same multiplexer function and matching terminal arrangement. MC14051BDG and MC14051BFEL are additional related options. The exact ordering suffix can change packing, temperature grade, or lead style, so confirm the physical package and electrical requirements rather than relying only on the base MC14051B function.
What can replace MC14051BF?
The documented replacement candidates are MC14051BDR2G, MC14051BDG, and MC14051BFEL, all from onsemi and associated with the 16-pin MC14051B family. Their shared function and package make them practical candidates when the original ordering code is unavailable. Because the available cross-reference information does not independently verify a full set of five alternatives, engineers should compare electrical limits, temperature grade, and pin assignment in the manufacturer datasheet before substitution.
Is MC14051BF suitable for sensor and measurement systems?
Yes, MC14051BF is suitable for sensor multiplexing when the selected signal bandwidth and source impedance are compatible with its approximately 280 ohm ON resistance. The device can route outputs from multiple sensors to a shared amplifier or ADC, reducing the number of analog input channels required. Keep traces short, use a high-impedance buffer when precision is important, and evaluate switch leakage and charge injection during the input-settling interval.
MC14051BF vs CD4051B: is the MC14051BF pin-compatible?
The MC14051B is documented as a pin-for-pin replacement for the CD4051, CD4052, and CD4053 families. The MC14051BF therefore provides a functional and pin-compatible option for a CD4051 design where its voltage range, ON resistance, leakage, and timing meet the circuit requirements. This statement does not by itself confirm regulatory, quality-program, or exact timing equivalence for every CD4051 source device.
When should I choose MC14051BF over a lower-resistance analog switch?
Choose MC14051BF when eight analog channels, three binary select inputs, a 3 V to 18 V supply range, and approximately 280 ohm ON resistance satisfy the design. Select a lower-resistance device when source impedance is high, precision gain accuracy is critical, or switch insertion loss must be minimized. The MC14051BF remains useful when channel count, supply range, logic compatibility, and cost matter more than sub-100-ohm switching resistance.
What design limitations should be checked for MC14051BF?
Check ON resistance, OFF leakage, switching time, channel capacitance, and the valid input voltage range before using MC14051BF in a precision or high-speed circuit. Its approximately 280 ohm ON resistance can create gain error when the source impedance is not much higher than that value. Also allow the ADC or measurement front end to settle after changing the three select inputs, and confirm that the supply and logic levels remain valid under all operating conditions.
Where can I buy MC14051BF and request a quote?
Use the Request a Quote form on this page to ask for MC14051BF availability, current lead time, and order quantities. The visible structured pricing is updated by the platform, while this copy intentionally does not reproduce a static price that could become stale. Confirm the exact 16-pin ordering code, acceptable packing method, minimum order quantity, and current production status before placing an order.
How much does MC14051BF cost and is it in stock?
MC14051BF pricing and inventory change by quantity, package suffix, and market conditions, so the current amount should be obtained through the Request a Quote form on this page. The same form can confirm stock, lead time, and minimum order quantity for the exact MPN. Requesting a quotation for MC14051BF also helps prevent an order from being placed against a different package or tape-and-reel suffix.
What is the lead time for MC14051BF?
The current lead time for MC14051BF should be confirmed through the Request a Quote form on this page because it can vary with order quantity, packing requirement, and market availability. When requesting the quotation, identify the exact 16-pin MPN, required shipment quantity, and whether tape-and-reel, tray, tube, or bulk packaging is acceptable. This avoids ambiguity with related MC14051B ordering codes.
What are the key specifications of MC14051BF that engineers should know?
The key MC14051BF specifications are its 8:1 SP8T configuration, three select inputs, 3 V to 18 V operating range, approximately 280 ohm ON resistance, low OFF leakage, and 16-pin SO EIAJ package. The onsemi datasheet also identifies it as a CMOS analog multiplexer with low ON impedance. Engineers should pair these specifications with signal-bandwidth, settling-time, and source-impedance requirements when selecting the device.
Is there an onsemi cross reference for MC14051BF?
onsemi provides a manufacturer cross-reference service for identifying functionally comparable devices, and the available MC14051B cross-reference results identify MC14051BDR2G, MC14051BDG, and MC14051BFEL as related replacement candidates. The manufacturer notes that cross-reference information is a suggestion and requires engineering review. Verify package, pinout, voltage limits, and electrical characteristics before using any listed candidate in production.

Dữ liệu tham khảo kỹ thuật cho MC14051BF — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose MC14051BF when a design requires an 8:1 analog multiplexer, three binary select inputs, a 3 V to 18 V supply range, and approximately 280 ohm ON resistance in a 16-pin SO EIAJ package. It is particularly suitable for industrial sensing, data acquisition, test equipment, and low-frequency signal routing where one ADC or amplifier input can serve several sources. MC14051BDR2G, MC14051BDG, and MC14051BFEL are practical same-manufacturer alternatives when an ordering suffix is preferable, but each exact suffix must be checked for packing, temperature grade, and lifecycle conditions. If source impedance is high enough for the 280 ohm switch resistance to create unacceptable gain error, add a buffer or choose a lower-resistance switch. For signal bandwidth beyond the device's switching characteristics, use a dedicated high-speed analog multiplexer instead.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MC14051BDR2G MC14051BDG MC14051BFEL
Brand onsemi onsemi onsemi onsemi
Package 16-pin SO EIAJ 16-pin SO EIAJ 16-pin SO EIAJ 16-pin SO EIAJ
Multiplexer Configuration 8:1 SP8T 8:1 SP8T 8:1 SP8T 8:1 SP8T
Number of Select Inputs 3 binary inputs 3 binary inputs 3 binary inputs 3 binary inputs
Signal Type Analog or digital Analog or digital Analog or digital Analog or digital
Switch Topology Bilateral CMOS analog switch Bilateral CMOS analog switch Bilateral CMOS analog switch Bilateral CMOS analog switch
CD4051 Pin Compatibility Pin-for-pin replacement family MC14051B family MC14051B family MC14051B family

Bảo phân biệt quan trọng

  • Eight-channel analog selection in a standard 16-pin package (vsMC14051BDR2G)
  • Direct same-manufacturer sourcing path (vsMC14051BDG)
  • Family-level compatibility with CD4051 designs (vsMC14051BFEL)

Ghi chú thiết kế

Do not treat the 280 ohm ON resistance as negligible when the selected source has a high impedance. The switch and surrounding network form a voltage divider, and the resistor itself adds thermal noise. For precision measurements, use source and load impedances much higher than 280 ohm, or place a low-noise, high-impedance buffer after the common terminal. Also allow the ADC sample-and-hold circuit and antialiasing filter to settle after each channel change.

Route the COM terminal and the eight channel terminals with short, direct traces and maintain a continuous ground plane beneath and around the device. Avoid sharing narrow paths with switching-power nodes or digital clocks. Place any input filtering close to the pins that it protects, and use a defined select state during reset through appropriate pull resistors. These layout practices reduce parasitic capacitance, coupling, and startup transients that can affect low-level analog measurements.

Estimate the acquisition sequence as switch-selection time plus amplifier-settling time plus ADC-sampling time. The MC14051BF is suitable for many low-frequency multiplexing tasks, but its bandwidth, channel capacitance, charge injection, and switching-time characteristics must be checked before using it for fast signals. At higher frequencies, preserve impedance continuity, minimize loop area, and consider a dedicated high-speed analog switch with lower ON resistance and controlled charge injection.

Supply VDD and the analog and digital return pins according to the manufacturer datasheet, paying particular attention to VEE in systems that use split or negative analog supplies. Decouple the supply pins locally and keep the common signal ground reference continuous. Do not apply signal voltages to pins unless the complete electrical characteristic table confirms that the selected condition is valid. The listed 3 V to 18 V operating range is a device boundary, not permission to exceed absolute maximum ratings.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Yes
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The manufacturer datasheet states that Pb-free packages are available. Separate RoHS, REACH, halogen-free, and conflict-minerals classifications were not identified in the cited product information, so those fields remain unknown. AEC-Q100 is not applicable to this general-purpose interface IC.

Dữ liệu được xác minh vào: 2026-11-11 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MC14051BF datasheet MC14051BF pinout MC14051BF datasheet pdf MC14051BF equivalent MC14051BF replacement MC14051BF cross reference MC14051BF price MC14051BF stock onsemi MC14051BF MC14051BF 8:1 analog multiplexer MC14051BF 280 ohm MC14051BF 3-18V MC14051BF SO EIAJ pinout MC14051BF sensor multiplexing MC14051BF vs CD4051

Các bộ phận và thuật ngữ liên quan

onsemi MC14051BF MC14051B MC14051BDR2G MC14051BDG MC14051BFEL analog multiplexer analog demultiplexer interface IC SP8T switch CMOS analog switch bilateral switch select input ON resistance OFF leakage current common terminal CD4051 SO EIAJ 16-pin SOIC package surface-mount package 3 V to 18 V supply industrial instrumentation data acquisition sensor multiplexing onsemi MC14051B/D
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ