MC14503BD - Hex 3-State Buffer, 3-18V | onsemi
MPN: MC14503BD ✓ Hoạt độngMC14503BD Tóm tắt
A hex 3-state buffer is a digital logic device that passes each input signal to its corresponding output without inversion. When an output is disabled, it enters a high-impedance state and releases the connected bus line. This tri-state behavior places the MC14503BD in the wider logic-buffer and bus-driver hierarchy, supporting functions from signal isolation and level buffering to bus multiplexing and data-bus sharing.
The MC14503B family provides two disable controls. A high level on Disable A places the outputs of buffers 1 through 4 into the high-impedance state, while a high level on Disable B controls the outputs of buffers 5 and 6. This arrangement allows two groups of three outputs to be enabled or disabled independently, which is useful when several devices drive a shared communication or address bus.
The 3 V to 18 V operating range makes the MC14503BD suitable for both 5 V and legacy multi-voltage logic systems. Its 16-pin SOIC construction supports compact, high-density PCB layouts while preserving the pin arrangement associated with the MC14503B family. Because the output impedance is high while disabled, only one buffer should actively drive a shared node at a time.
Typical uses include bidirectional bus isolation, address decoding, memory-bank selection, peripheral multiplexing, and level translation within mixed-voltage systems. Its non-inverting signal path preserves data polarity, allowing the device to be inserted between a source and destination logic node without changing bus timing or data format.
When assigning PCB signals, use the manufacturer pin-description table to confirm the data, disable, supply, and ground connections. Keep the disable traces away from high-current switching nodes, and confirm that every shared output node has exactly one enabled driver during any operating state.
Bộ thay thế dễ dàng lắp đặt cho MC14503BD — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
MC14503BDR2G
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MC14503BFELG
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CD4503BNSR
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
CD4503BM96
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MC14503BD Tỷ lệ tối đa & tính chất điện
| Product Type | Hex non-inverting 3-state buffer |
| Number of Elements | 6 |
| Inputs per Element | 1 |
| Kiểu đầu ra | 3-state, non-inverting |
| Supply Voltage Range | 3 V to 18 V |
| Disable Inputs | 2 independent disable controls |
| Disable A Control | High level disables outputs of buffers 1 through 4 |
| Disable B Control | High level disables outputs of buffers 5 and 6 |
| Output Current Capability | High current source and sink capability |
| Hộp | 16-pin SOIC |
| Kiểu lắp đặt | Surface mount |
| Khoảng nhiệt độ hoạt động | -55 °C to 125 °C |
| Logic Family | MC14503B series |
| Common-Bus Support | Yes |
Cấu hình chân MC14503BD
| Chân 1 | DATA 1 — Data input for buffer 1 |
| Chân 2 | DATA 1 OUT — Non-inverting, 3-state output for buffer 1 |
| Chân 3 | DATA 2 — Data input for buffer 2 |
| Chân 4 | DATA 2 OUT — Non-inverting, 3-state output for buffer 2 |
| Chân 5 | DATA 3 — Data input for buffer 3 |
| Chân 6 | DATA 3 OUT — Non-inverting, 3-state output for buffer 3 |
| Chân 7 | DISABLE A — High level disables the outputs of buffers 1 through 4 |
| Chân 8 | DATA 4 — Data input for buffer 4 |
| Chân 9 | DATA 4 OUT — Non-inverting, 3-state output for buffer 4 |
| Chân 10 | DISABLE B — High level disables the outputs of buffers 5 and 6 |
| Chân 11 | DATA 5 — Data input for buffer 5 |
| Chân 12 | DATA 5 OUT — Non-inverting, 3-state output for buffer 5 |
| Chân 13 | DATA 6 — Data input for buffer 6 |
| Chân 14 | DATA 6 OUT — Non-inverting, 3-state output for buffer 6 |
| Chân 15 | VDD — Positive power supply |
| Chân 16 | VSS — Ground reference |
Ứng dụng tiêu biểu
MC14503BD phù hợp cho 6 Áp dụngs: Shared Data-Bus Multiplexing, Address-Decoder Output Isolation, Peripheral Output Isolation, Mixed-Voltage Logic Interfacing, Memory-Bank and Chip-Select Multiplexing, Test and Measurement Input Multiplexing.
Shared Data-Bus Multiplexing
The MC14503BD fits shared-bus designs because its six outputs can enter a high-impedance state instead of driving a node continuously. Disable A controls the first four buffers and Disable B controls the final two, allowing two driver banks to be managed independently. Place the device between a bus master and peripheral data lines, and activate only one driver bank at a time to prevent contention. The 3 V to 18 V supply range accommodates 5 V legacy systems and higher-voltage mixed-logic networks, while the non-inverting path leaves data polarity and timing conventions unchanged.
Được đề xuất
Address-Decoder Output Isolation
Use the MC14503BD to isolate decoded address or chip-select signals from a shared backplane. Each of its six non-inverting inputs can feed a corresponding output, and the two disable controls can remove an entire group of drivers when an address range is inactive. This approach prevents a disabled output from fighting a peripheral that has taken control of the same line. The SOIC-16 package supports compact decoder layouts, while the 3 V to 18 V operating range covers both 5 V logic and higher-voltage industrial interface systems.
Được đề xuất
Peripheral Output Isolation
The MC14503BD can isolate peripheral drivers that share a system bus without requiring a separate open-collector or totem-pole driver on every node. A high level on the appropriate disable input releases all outputs in that group into the high-impedance state, allowing another enabled peripheral to take control. This is useful in legacy peripheral cards where several devices share address, data, or interrupt lines. The MC14503B family's high source and sink capability supports bus operation, and the non-inverting arrangement simplifies retrofit around existing positive-logic signals.
Được đề xuất
Mixed-Voltage Logic Interfacing
The MC14503BD can buffer signals in mixed-voltage equipment when its supply is selected to remain compatible with the connected logic levels. Its 3 V to 18 V operating range supports operation across several legacy and industrial supply standards, subject to the input and output thresholds specified in the manufacturer datasheet. Because the buffer is non-inverting, it can be inserted without altering the logical sense of control or data signals. Verify the disable-signal levels as well, particularly when the bus-disable control originates from a different supply domain.
Được đề xuất
Memory-Bank and Chip-Select Multiplexing
The MC14503BD is applicable to memory-bank switching because chip-select outputs can be buffered and released when their associated bank is not selected. Disable the inactive bank before enabling the requested bank, preventing two memory devices from driving shared control lines simultaneously. Its six buffers allow several chip-select or control paths to be handled in one package, while the two grouped disable inputs reduce the number of control signals. Verify timing margin because propagation delay and output transition data must be taken from the exact MC14503B ordering variant.
Được đề xuất
Test and Measurement Input Multiplexing
Instrumentation systems can use the MC14503BD to route several buffered signals onto a common measurement bus without leaving multiple outputs permanently enabled. Disable the inactive sources and enable only the measurement channel required at a given time, reducing the risk of bus contention. The high-impedance output state also allows the bus to settle toward the leakage-limited condition described by the device characteristics rather than being held at a logic level. Confirm propagation delay, rise and fall time, and input capacitance against the instrumentation bandwidth before choosing this legacy buffer.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MC14503BD — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MC14503BDR2G | MC14503BFELG | CD4503BNSR | CD4503BM96 |
|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | onsemi | onsemi | onsemi | Renesas Electronics | Renesas Electronics |
| Function | Hex non-inverting 3-state buffer | MC14503B family 3-state buffer | MC14503B family 3-state buffer | Equivalent 3-state buffer | Equivalent 3-state buffer |
| Number of Buffers | 6 | 6 | 6 | 6 | 6 |
| Output Polarity | Non-inverting | Non-inverting | Non-inverting | Non-inverting | Non-inverting |
Bảo phân biệt quan trọng
- Grouped disable control supports efficient bus-bank isolation (vsCD4503BNSR)
- Wide supply-voltage range for legacy and industrial logic (vsCD4503BM96)
- Same-family onsemi sourcing path with documented temperature capability (vsMC14503BFELG)
Ghi chú thiết kế
Never allow two outputs to drive the same bus node simultaneously. Disable every conflicting driver before enabling the selected one, and include a defined disable state in the power-up sequence. The MC14503B family's high source and sink capability also makes contention potentially destructive rather than merely producing an incorrect logic level.
Use the manufacturer pin-description table when assigning the 16 SOIC connections. Place the device close to the shared-bus routing so disabled outputs see short stub traces, and route the two disable inputs away from switching-node copper. Short data traces reduce the practical benefit of buffering, so the part is most effective where it isolates a bus segment from a longer shared route.
Check propagation delay, output rise and fall time, input capacitance, and output drive current in the MC14503B datasheet before using the buffer at high data rates. The 3-state transition must also satisfy the receiving device's setup and hold requirements. At multi-megahertz rates, include the disabled-output capacitive loading and the receiving-device input capacitance in the timing budget.
Thông tin tuân thủ
The MC14503BD is a general-purpose logic buffer rather than an automotive-qualified product. RoHS, REACH, lead-free, and halogen-free status were not confirmed for this ordering variant and require verification from current onsemi product documentation.