onsemi

MC14503BD - Hex 3-State Buffer, 3-18V | onsemi

MPN: MC14503BD ✓ نشط
3 V to 18 V Vdss High current source and sink capability Id 16-pin SOIC Package
الحد الأدنى للطلب: 1 |

MC14503BD نظرة عامة

The onsemi MC14503BD is a hex non-inverting buffer with six high-impedance, 3-state outputs and two independent disable controls. The device operates from 3 V to 18 V, supports common-bus multiplexing, and is packaged in a 16-pin SOIC for surface-mount assembly. It is designed to provide high current source and sink capability while allowing multiple drivers to share a bus without active output contention.

A hex 3-state buffer is a digital logic device that passes each input signal to its corresponding output without inversion. When an output is disabled, it enters a high-impedance state and releases the connected bus line. This tri-state behavior places the MC14503BD in the wider logic-buffer and bus-driver hierarchy, supporting functions from signal isolation and level buffering to bus multiplexing and data-bus sharing.

The MC14503B family provides two disable controls. A high level on Disable A places the outputs of buffers 1 through 4 into the high-impedance state, while a high level on Disable B controls the outputs of buffers 5 and 6. This arrangement allows two groups of three outputs to be enabled or disabled independently, which is useful when several devices drive a shared communication or address bus.

The 3 V to 18 V operating range makes the MC14503BD suitable for both 5 V and legacy multi-voltage logic systems. Its 16-pin SOIC construction supports compact, high-density PCB layouts while preserving the pin arrangement associated with the MC14503B family. Because the output impedance is high while disabled, only one buffer should actively drive a shared node at a time.

Typical uses include bidirectional bus isolation, address decoding, memory-bank selection, peripheral multiplexing, and level translation within mixed-voltage systems. Its non-inverting signal path preserves data polarity, allowing the device to be inserted between a source and destination logic node without changing bus timing or data format.

When assigning PCB signals, use the manufacturer pin-description table to confirm the data, disable, supply, and ground connections. Keep the disable traces away from high-current switching nodes, and confirm that every shared output node has exactly one enabled driver during any operating state.

بدائل مباشرة لـ MC14503BD — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

MC14503BDR2G

✅ بديل مباشر
📦 16-SOIC
Same MC14503B family and 16-SOIC package; operating temperature is listed as -55 °C to 125 °C, while electrical timing and drive-current differences require datasheet confirmation

📋 بديل مرجعي (غير موجود في الكتالوج)

MC14503BFELG

✅ بديل مباشر
📦 16-SOIC
Same MC14503B function with a different ordering suffix; electrical characteristics and temperature grade differ slightly and must be checked in the onsemi datasheet

📋 بديل مرجعي (غير موجود في الكتالوج)

CD4503BNSR

✅ بديل مباشر
📦 16-SOIC
Cited as a pin-compatible hex 3-state buffer alternative; disable-control organization, timing, and drive-current ratings may differ from the MC14503BD

📋 بديل مرجعي (غير موجود في الكتالوج)

CD4503BM96

✅ بديل مباشر
📦 16-SOIC
Cited as an equivalent 3-state buffer in the same 16-pin SOIC format; output timing and disable polarity must be confirmed against the circuit requirements

📋 بديل مرجعي (غير موجود في الكتالوج)

MC14503BD الحدود القصوى والخصائص الكهربائية

Product Type Hex non-inverting 3-state buffer
Number of Elements 6
Inputs per Element 1
نوع الخرج 3-state, non-inverting
Supply Voltage Range 3 V to 18 V
Disable Inputs 2 independent disable controls
Disable A Control High level disables outputs of buffers 1 through 4
Disable B Control High level disables outputs of buffers 5 and 6
Output Current Capability High current source and sink capability
العلبة 16-pin SOIC
نوع التركيب Surface mount
نطاق درجة حرارة التشغيل -55 °C to 125 °C
Logic Family MC14503B series
Common-Bus Support Yes

تكوين أطراف MC14503BD

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
دبوس 1 DATA 1 — Data input for buffer 1
دبوس 2 DATA 1 OUT — Non-inverting, 3-state output for buffer 1
دبوس 3 DATA 2 — Data input for buffer 2
دبوس 4 DATA 2 OUT — Non-inverting, 3-state output for buffer 2
دبوس 5 DATA 3 — Data input for buffer 3
دبوس 6 DATA 3 OUT — Non-inverting, 3-state output for buffer 3
دبوس 7 DISABLE A — High level disables the outputs of buffers 1 through 4
دبوس 8 DATA 4 — Data input for buffer 4
دبوس 9 DATA 4 OUT — Non-inverting, 3-state output for buffer 4
دبوس 10 DISABLE B — High level disables the outputs of buffers 5 and 6
دبوس 11 DATA 5 — Data input for buffer 5
دبوس 12 DATA 5 OUT — Non-inverting, 3-state output for buffer 5
دبوس 13 DATA 6 — Data input for buffer 6
دبوس 14 DATA 6 OUT — Non-inverting, 3-state output for buffer 6
دبوس 15 VDD — Positive power supply
دبوس 16 VSS — Ground reference

التطبيقات النموذجية

MC14503BD مناسب لـ 6 التطبيقs: Shared Data-Bus Multiplexing, Address-Decoder Output Isolation, Peripheral Output Isolation, Mixed-Voltage Logic Interfacing, Memory-Bank and Chip-Select Multiplexing, Test and Measurement Input Multiplexing.

🖥️

Shared Data-Bus Multiplexing

The MC14503BD fits shared-bus designs because its six outputs can enter a high-impedance state instead of driving a node continuously. Disable A controls the first four buffers and Disable B controls the final two, allowing two driver banks to be managed independently. Place the device between a bus master and peripheral data lines, and activate only one driver bank at a time to prevent contention. The 3 V to 18 V supply range accommodates 5 V legacy systems and higher-voltage mixed-logic networks, while the non-inverting path leaves data polarity and timing conventions unchanged.

🏭

Address-Decoder Output Isolation

Use the MC14503BD to isolate decoded address or chip-select signals from a shared backplane. Each of its six non-inverting inputs can feed a corresponding output, and the two disable controls can remove an entire group of drivers when an address range is inactive. This approach prevents a disabled output from fighting a peripheral that has taken control of the same line. The SOIC-16 package supports compact decoder layouts, while the 3 V to 18 V operating range covers both 5 V logic and higher-voltage industrial interface systems.

🔧

Peripheral Output Isolation

The MC14503BD can isolate peripheral drivers that share a system bus without requiring a separate open-collector or totem-pole driver on every node. A high level on the appropriate disable input releases all outputs in that group into the high-impedance state, allowing another enabled peripheral to take control. This is useful in legacy peripheral cards where several devices share address, data, or interrupt lines. The MC14503B family's high source and sink capability supports bus operation, and the non-inverting arrangement simplifies retrofit around existing positive-logic signals.

⚡

Mixed-Voltage Logic Interfacing

The MC14503BD can buffer signals in mixed-voltage equipment when its supply is selected to remain compatible with the connected logic levels. Its 3 V to 18 V operating range supports operation across several legacy and industrial supply standards, subject to the input and output thresholds specified in the manufacturer datasheet. Because the buffer is non-inverting, it can be inserted without altering the logical sense of control or data signals. Verify the disable-signal levels as well, particularly when the bus-disable control originates from a different supply domain.

🖥️

Memory-Bank and Chip-Select Multiplexing

The MC14503BD is applicable to memory-bank switching because chip-select outputs can be buffered and released when their associated bank is not selected. Disable the inactive bank before enabling the requested bank, preventing two memory devices from driving shared control lines simultaneously. Its six buffers allow several chip-select or control paths to be handled in one package, while the two grouped disable inputs reduce the number of control signals. Verify timing margin because propagation delay and output transition data must be taken from the exact MC14503B ordering variant.

📺

Test and Measurement Input Multiplexing

Instrumentation systems can use the MC14503BD to route several buffered signals onto a common measurement bus without leaving multiple outputs permanently enabled. Disable the inactive sources and enable only the measurement channel required at a given time, reducing the risk of bus contention. The high-impedance output state also allows the bus to settle toward the leakage-limited condition described by the device characteristics rather than being held at a logic level. Confirm propagation delay, rise and fall time, and input capacitance against the instrumentation bandwidth before choosing this legacy buffer.

What is the MC14503BD?
The MC14503BD is a hex non-inverting 3-state buffer that operates from 3 V to 18 V. It provides six individually disabled outputs, high current source and sink capability, and two disable controls in a 16-pin SOIC package. According to the onsemi MC14503B datasheet, Disable A controls buffers 1 through 4, while Disable B controls buffers 5 and 6, allowing separate output groups to be released from a shared bus.
How do the disable inputs on the MC14503BD work?
A high level on Disable A forces the outputs of buffers 1 through 4 into the high-impedance state, and a high level on Disable B forces the outputs of buffers 5 and 6 into a high-impedance state. The manufacturer datasheet states that each disable input controls a separate group of outputs. This grouping allows a system to connect two independently controlled driver banks to a common bus while preventing output contention.
What is the supply voltage range of the MC14503BD?
The MC14503BD operates from 3 V to 18 V. Mouser lists the device as a 3 V to 18 V hex 3-state buffer, while the onsemi MC14503B datasheet describes the family's high-voltage operation and output current capability. The range supports legacy 5 V designs as well as mixed-voltage systems, provided the connected bus and disable signals remain within the specified operating limits.
Where can I download the MC14503BD datasheet PDF?
The manufacturer datasheet PDF is available from onsemi at https://www.onsemi.com/pdf/datasheet/mc14503b-d.pdf. The document covers the MC14503B family, including the MC14503BD ordering variation, and provides the electrical characteristics, disable behavior, and pin descriptions needed for schematic capture and PCB layout. Use the pin-description table to assign the 16 SOIC connections before routing the board.
Where can I find the MC14503BD pinout?
The MC14503BD pinout is documented in the pin-description table of the onsemi MC14503B datasheet. The device is a 16-pin SOIC and includes six data inputs, six corresponding non-inverting outputs, two disable inputs, and supply connections. Confirm each signal against the datasheet before assigning PCB tracks, especially the polarity of Disable A and Disable B.
Can the MC14503BD drive a shared bus?
The MC14503BD can drive a shared bus when only one output is enabled at a time. Its 3-state outputs release the bus in the high-impedance condition, and the manufacturer describes high current source and sink capability for bus applications. Use the two disable controls to isolate buffers 1 through 4 or 5 and 6 before another device assumes control of the same node.
Is the MC14503BD suitable for 5 V logic systems?
The MC14503BD is suitable for 5 V logic systems because its specified supply-voltage range of 3 V to 18 V includes a 5 V rail. The buffer preserves non-inverting logic polarity and supports independent output disabling. Confirm the input and output voltage levels in the manufacturer electrical-characteristics table for the selected temperature grade and supply voltage.
What can replace the MC14503BD?
The MC14503BDR2G is a closely related onsemi family member that can be evaluated as a same-family replacement, while the CD4503BNSR and CD4503BM96 are cited as pin-compatible alternatives with comparable buffered 3-state functionality. Before substitution, confirm disable polarity, supply range, output drive current, propagation delay, and package dimensions against the manufacturer datasheet for the exact replacement part.
What is the best onsemi equivalent for the MC14503BD?
The MC14503BDR2G is the closest onsemi same-family alternative identified for the MC14503BD because both belong to the MC14503B family and the cross-reference listing identifies the SOIC 16-pin version. Its operating temperature range is listed as -55 °C to 125 °C. Treat it as a candidate drop-in device only after checking the ordering suffix, disable logic, electrical limits, and package drawing.
What is the best Renesas equivalent for the MC14503BD?
The CD4503BNSR is a Renesas candidate for the MC14503BD because it is identified as offering equivalent active-pin-compatible hex 3-state buffer functionality. Renesas and onsemi organize their buffers and disable inputs differently, so verify the exact pin mapping, disable polarity, supply-voltage range, and output timing before using it as a drop-in replacement. The CD4503BM96 is another cited alternative in the same SOIC package family.
When should I choose the MC14503BD over another 3-state buffer?
Choose the MC14503BD when a design needs a non-inverting hex buffer, a 3 V to 18 V supply range, and two disable inputs that control separate groups of outputs. It is particularly useful for legacy buses requiring high source and sink capability. Select an alternative instead when its supply range, disable polarity, propagation delay, output drive level, or package differs from the original circuit requirements.
MC14503BD vs CD4503BNSR: which is better for a legacy bus?
The MC14503BD is preferable when the design depends on the MC14503B family's specified 3 V to 18 V range, high source and sink capability, and grouping of Disable A over buffers 1 through 4. The CD4503BNSR is preferable when availability and lifecycle requirements dominate and its own datasheet confirms matching disable polarity, timing, drive strength, and pin assignments. Neither should replace the other without a complete electrical comparison.
What are the key specifications of MC14503BD that engineers should know?
The MC14503BD is a 16-pin SOIC hex non-inverting 3-state buffer rated for 3 V to 18 V operation. Its principal features are six high-impedance outputs, high current source and sink capability, one disable input controlling outputs 1 through 4, and another controlling outputs 5 and 6. The onsemi MC14503B datasheet is the controlling document for propagation delay, drive current, and logic-level specifications.
Where can I buy MC14503BD online?
Use the Request a Quote form on this page to request MC14503BD pricing, current stock, minimum order quantity, and lead time for the 16-pin SOIC ordering variation. Because availability and commercial terms can change, request a firm quotation for the exact MPN rather than relying on a generic listing. Include the required quantity, target date, and shipping destination in the request.
What is the price of the MC14503BD?
Current MC14503BD pricing depends on order quantity, sourcing channel, and market availability. Use the Request a Quote form on this page to obtain a current quotation for the exact 16-pin SOIC MPN. The form can also confirm current stock, minimum order quantity, and production lead time, which are more useful for obsolete or constrained sourcing than a static price figure.
What is the lead time for MC14503BD?
The current MC14503BD lead time should be confirmed through the Request a Quote form on this page because it depends on lot availability, required quantity, and the manufacturer's production status. Request the earliest delivery schedule and lot traceability at the same time. For new production quantities, state the annual usage so the supplier can assess whether additional allocation is required.
Is the MC14503BD in stock?
Request current MC14503BD stock confirmation through the Request a Quote form on this page. Inventory can vary by package suffix and order quantity, so specify the exact MC14503BD MPN, target quantity, and delivery date. The same request can confirm minimum order quantity, lead time, and whether a single lot or multiple lots would be supplied.
What design pitfalls should be avoided with the MC14503BD?
The primary design pitfall is enabling more than one driver on a shared bus node simultaneously, which can cause output contention and excessive current. Disable all inactive drivers before another output is enabled, and keep the disable traces away from noisy switching nodes. Also verify that the supply, ground, data, and disable connections follow the manufacturer pin-description table for the 16-pin SOIC package.

بيانات مرجعية هندسية لـ MC14503BD — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the MC14503BD for a legacy shared-bus design that requires six non-inverting 3-state outputs, two grouped disable controls, and operation across a 3 V to 18 V supply range. The MC14503BDR2G is the most direct onsemi same-family candidate when its ordering suffix and temperature grade satisfy the design, while MC14503BFELG offers another family ordering route. Consider the CD4503BNSR or CD4503BM96 when a cross-brand sourcing path is needed, but verify disable polarity, propagation delay, drive strength, and supply limits before substitution. Avoid using the device where outputs must remain active simultaneously, where the data rate exceeds its specified transition performance, or where the system requires a Schmitt-trigger input. For new high-speed designs, a dedicated transceiver with controlled-impedance differential outputs is usually preferable.

المقارنة مع البدائل

المعامل هذا المنتج MC14503BDR2G MC14503BFELG CD4503BNSR CD4503BM96
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand onsemi onsemi onsemi Renesas Electronics Renesas Electronics
Function Hex non-inverting 3-state buffer MC14503B family 3-state buffer MC14503B family 3-state buffer Equivalent 3-state buffer Equivalent 3-state buffer
Number of Buffers 6 6 6 6 6
Output Polarity Non-inverting Non-inverting Non-inverting Non-inverting Non-inverting

أبرز الفروقات

  • Grouped disable control supports efficient bus-bank isolation (مقابلCD4503BNSR)
  • Wide supply-voltage range for legacy and industrial logic (مقابلCD4503BM96)
  • Same-family onsemi sourcing path with documented temperature capability (مقابلMC14503BFELG)

ملاحظات التصميم

Never allow two outputs to drive the same bus node simultaneously. Disable every conflicting driver before enabling the selected one, and include a defined disable state in the power-up sequence. The MC14503B family's high source and sink capability also makes contention potentially destructive rather than merely producing an incorrect logic level.

Use the manufacturer pin-description table when assigning the 16 SOIC connections. Place the device close to the shared-bus routing so disabled outputs see short stub traces, and route the two disable inputs away from switching-node copper. Short data traces reduce the practical benefit of buffering, so the part is most effective where it isolates a bus segment from a longer shared route.

Check propagation delay, output rise and fall time, input capacitance, and output drive current in the MC14503B datasheet before using the buffer at high data rates. The 3-state transition must also satisfy the receiving device's setup and hold requirements. At multi-megahertz rates, include the disabled-output capacitive loading and the receiving-device input capacitance in the timing budget.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The MC14503BD is a general-purpose logic buffer rather than an automotive-qualified product. RoHS, REACH, lead-free, and halogen-free status were not confirmed for this ordering variant and require verification from current onsemi product documentation.

تم التحقق من البيانات في: 2026-11-11 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

MC14503BD datasheet MC14503BD pinout MC14503BD equivalent MC14503BD replacement MC14503BD cross reference MC14503BD vs CD4503BNSR MC14503BD 16-SOIC MC14503BD 3-18V buffer onsemi MC14503BD MC14503BD hex 3-state buffer MC14503BD disable inputs MC14503BD price MC14503BD stock MC14503BD SOIC application circuit

المكونات والمصطلحات ذات الصلة

onsemi MC14503BD MC14503B MC14503BDR2G MC14503BFELG CD4503BNSR CD4503BM96 Renesas Electronics hex non-inverting buffer tri-state logic buffer bus driver logic buffer high-impedance output common-bus multiplexing 3-state output disable control Disable A Disable B 16-pin SOIC surface-mount logic IC 3 V to 18 V supply shared data bus address decoding high current source and sink capability
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر