MC7447AHX1420LB - 1.42GHz PowerPC G4 MPU | NXP | 360-FCCBGA
MPN: MC7447AHX1420LB ✗ Cuối đờiMC7447AHX1420LB Tóm tắt
A PowerPC G4 microprocessor is a 32-bit RISC CPU that extends the Power Architecture instruction set with the AltiVec SIMD/vector engine, enabling high-throughput parallel arithmetic for DSP-style kernels such as multimedia codecs, encryption, and radar processing. Within the broader system hierarchy it sits as an application-class MPU above microcontrollers, below high-end server CPUs, and pairs with companion memory controllers, northbridges, and voltage regulators to form a complete compute node. The MPC7447A family was designed to deliver server-class integer performance at embedded power budgets.
Key features include a 1.42 GHz core frequency, 64-bit external data bus, dedicated L1 instruction and data caches plus 512 KB unified L2 with cache locking support, eight instruction and data BAT registers for lightweight embedded operating systems, and low-power modes. The AltiVec unit delivers up to 16 multiply-accumulate operations per cycle, making the part suitable for vectorized workloads.
Architecturally the device uses a seven-stage integer pipeline with out-of-order execution capability and a separate vector unit. The 64-bit MPX bus to the system controller provides high memory bandwidth, while the integrated L2 cache reduces external memory pressure for working-set-intensive workloads. The 0.13 um process delivers the frequency target at modest power relative to earlier PowerPC G4 generations.
Typical applications include leading-edge embedded computing platforms, network control and packet processing appliances, signal-processing boards, telecom base-station controller cards, and aerospace/defense single-board computers where pin-compatible PowerPC upgrades are required. According to NXP product information, the part is suited to legacy PowerPC designs needing a 1.4 GHz-class core in a known footprint.
When designing with this device, ensure the board supports both 1.8 V and 2.5 V rails and that the 360-ball FCCBGA land pattern matches the package outline. Adequate thermal management is required because the device dissipates significant power under sustained AltiVec loads; the recommended junction ceiling is 105 C per the device ordering code suffix. This page synthesizes distributor availability, lifecycle signals, and drop-in PowerPC G4 alternatives that share the same package family.
Bộ thay thế dễ dàng lắp đặt cho MC7447AHX1420LB — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
MC7447AVU1420LB
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PC7447AVLH1420LC
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MC7447AHX1420LB Tỷ lệ tối đa & tính chất điện
| Core | PowerPC G4 (MPC7447A) |
| Architecture | 32-bit RISC with 128-bit AltiVec SIMD |
| Core Frequency | 1.42 GHz |
| Number of Cores | 1 |
| Bus Width | 64-bit |
| L2 Cache | 512 KB on-chip, unified |
| Cache Locking | Yes (L1) |
| BAT Registers | 8 instruction + 8 data |
| SIMD Engine | AltiVec 128-bit |
| Process Technology | 0.13 um CMOS |
| Supply Voltage (Core) | 1.8 V |
| Supply Voltage (I/O) | 2.5 V |
| Nhiệt độ hoạt động | 0C to 105C |
| Hộp | 360-FCCBGA (25x25 mm) |
| Kiểu lắp đặt | Surface Mount (BGA) |
Hướng dẫn cấu hình chân MC7447AHX1420LB 360-fccbga (25x25 mm)
Cấu hình chân cho MC7447AHX1420LB (360-fccbga (25x25 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MC7447AHX1420LB.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MC7447AHX1420LB phù hợp cho 6 Áp dụngs: Embedded Network Control Appliances, Signal Processing Boards, Telecom Base-Station Controller Cards, Aerospace/Defense Single-Board Computers, Industrial Computing Platforms, Legacy PowerPC G4 Sustaining Designs.
Embedded Network Control Appliances
The MC7447AHX1420LB's 1.42 GHz PowerPC core with AltiVec acceleration fits router and switch control-plane workloads that perform per-packet header inspection and ACL matching. Its 64-bit MPX bus and 512 KB L2 cache sustain line-rate lookups against large routing tables. Embedded network control appliances benefit from the part's low-power modes, which reduce idle consumption when traffic is low. The 360-FCCBGA package integrates into compact line-card form factors where a high-performance MPU with on-chip cache is required. Companion parts include the MPC107 northbridge and DDR memory buffers. Designers should size heatsinking for sustained packet processing because AltiVec workloads can fully exercise the core.
Được đề xuất
Signal Processing Boards
The AltiVec engine enables up to 16 single-precision MAC operations per cycle, making the MC7447AHX1420LB a strong fit for radar, sonar, and software-defined radio DSP front-ends. Its 1.42 GHz clock and 128-bit vector unit accelerate FFTs, FIR filters, and beamforming kernels that would otherwise require a dedicated DSP. Signal-processing boards in industrial and defense markets rely on the part's 0.13 um CMOS implementation to balance throughput and power. The 360-FCCBGA package supports high-density PCB layouts common in VPX and CompactPCI signal-processing cards. Designers should pair the MPU with a companion memory controller and external SDRAM to sustain streaming data rates.
Được đề xuất
Telecom Base-Station Controller Cards
The MC7447AHX1420LB provides the control-plane horsepower for legacy 3G/4G base-station controller cards where PowerPC software stacks are already deployed. Its 32-bit Power Architecture with AltiVec can manage Layer 2/3 protocols, encryption accelerators, and timing-critical maintenance tasks. Telecom-grade controller cards benefit from the part's industrial temperature grade (0C to 105C) and on-chip L2 cache that reduces external memory traffic during bursts. The 360-FCCBGA footprint integrates into ATCA and MicroTCA backplanes. Operators should ensure power-sequencing circuits match the 1.8 V core and 2.5 V I/O rail requirements specified in the NXP datasheet.
Được đề xuất
Aerospace/Defense Single-Board Computers
The MC7447AHX1420LB's industrial temperature grade and Pin-compatible footprint support aerospace/defense single-board computers (SBCs) that must operate reliably in extended thermal envelopes. Its AltiVec engine accelerates video processing, encryption, and telemetry analysis in avionics and unmanned-vehicle payloads. The second-source PC7447AVLH1420LC from e2v is widely qualified for aerospace programs requiring long-term continuity of supply. Defense SBCs typically use the part in VPX, VXS, or custom conduction-cooled layouts. Designers should review radiation and reliability data from the supplier before deployment in radiation-exposed environments.
Được đề xuất
Industrial Computing Platforms
Industrial computing platforms such as factory automation controllers and machine-vision inspection systems leverage the MC7447AHX1420LB's AltiVec vector engine for high-throughput image-processing pipelines. The 64-bit MPX bus supports bandwidth-hungry frame-grabber interfaces common in machine vision. The part's BAT registers enable efficient access to large memory-mapped I/O spaces, simplifying driver code for industrial peripherals. The 360-FCCBGA package is appropriate for high-density SBCs deployed in factory-floor enclosures. System integrators should design for adequate airflow and ensure the thermal envelope matches the 105 C junction ceiling.
Được đề xuất
Legacy PowerPC G4 Sustaining Designs
Sustaining designs for legacy PowerPC G4 systems - including older Apple Power Mac G4-derived industrial controllers and scientific instrumentation - rely on the MC7447AHX1420LB as a drop-in performance upgrade. The 1.42 GHz speed grade replaces older 1.0 GHz or 1.3 GHz MPC7447A parts without firmware changes, extending the service life of fielded equipment. The 512 KB on-chip L2 cache and AltiVec engine allow sustaining older software without performance penalties. Designers should validate BIOS/firmware against the specific speed-grade stepping before production rollout. Because NXP has discontinued the part, planning for last-time-buy inventory is essential.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MC7447AHX1420LB — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MC7447AVU1420LB | PC7447AVLH1420LC |
|---|---|---|---|
| Package | 360-FCCBGA (25x25 mm) | 360-FCCBGA (25x25 mm) - same | 360-FCCBGA - same |
| Brand | NXP Semiconductors | NXP Semiconductors | e2v technologies |
| Core Frequency | 1.42 GHz | 1.42 GHz | 1.42 GHz |
| L2 Cache | 512 KB | 512 KB | 512 KB |
| Supply Voltage (Core) | 1.8 V | 1.8 V | 1.8 V |
| Supply Voltage (I/O) | 2.5 V | 2.5 V | 2.5 V |
| AltiVec SIMD | Yes (128-bit) | Yes (128-bit) | Yes (128-bit) |
| Process Technology | 0.13 um CMOS | 0.13 um CMOS | 0.13 um CMOS |
| Lifecycle Status | Obsolete (NXP EOL) | Obsolete (NXP EOL) | Aerospace long-term supply |
Bảo phân biệt quan trọng
- 1.42 GHz highest speed grade in MPC7447A family (vsMC7447AVS1167NB)
- Industrial/extended temperature grade per HX suffix (vsPC7447AVLH1420LC (e2v aerospace variant))
- 512 KB on-chip L2 cache (vsMC7447AVU1420LB)
Ghi chú thiết kế
The MC7447AHX1420LB requires two independent supply rails: 1.8 V for the core and 2.5 V for the I/O/MPX bus. Power sequencing must follow the NXP MPC7447A hardware specifications to avoid latch-up; the I/O rail should ramp before or simultaneously with the core rail. Estimated: under sustained AltiVec load the core can draw in the multi-amp range; size the 1.8 V regulator for at least 1.5x the typical draw and use low-ESR bulk decoupling close to the BGA balls.
The 360-FCCBGA package dissipates significant heat under sustained AltiVec workloads. A thermal management strategy (heat spreader, heatsink, or airflow) is required to keep the junction temperature below the 105 C ceiling. Estimated: with the part running flat-out at 1.42 GHz, board designers should budget at least 10-15 W of dissipation in worst-case vector workloads and provide a thermal pad or copper pour under the BGA.
The 360-FCCBGA package requires a precise BGA land pattern per the NXP package drawing. Use microvia or via-in-pad PCB technology for reliable assembly, and follow IPC-7095 design rules for BGA. Because the part is obsolete and lead-free, reflow profiles must comply with the JEDEC J-STD-020 moisture sensitivity level of the specific device variant; many 360-FCCBGA lots are MSL3 or higher and require bake-out before assembly.
Do not assume all MC7447A variants are drop-in interchangeable: speed grade (1420 vs 1167 vs 1000), package suffix (HX vs VU vs VS), and temperature grade differ across order codes. Confirm the BGA ball map and AC timing against the NXP datasheet before substituting one suffix for another in production. Also note that the obsolete status means last-time-buy windows are short; plan for safety stock of 12-24 months of demand.
Thông tin tuân thủ
Compliance data not present in verified sources; confirm from lot-specific manufacturer documentation or certificate of conformance.