MC908AP64ACBE - HC08 8-Bit 8MHz 64KB FLASH MCU 42-SDIP | NXP
MPN: MC908AP64ACBE ✗ Cuối đờiMC908AP64ACBE Tóm tắt
What is an HC08 microcontroller? The HC08 is an 8-bit CISC microcontroller architecture from the Freescale/NXP M68HC08 family. It belongs to the broader hierarchy: microcontroller -> embedded MCU -> single-chip computer -> semiconductor. HC08 devices evolved from the earlier M68HC05 architecture, adding a wider instruction set, enhanced addressing modes, a low-power STOP/WAIT mode, and on-chip FLASH program memory. The 'AP' suffix denotes the HC08AP variant, which includes an internal high-speed oscillator and Phase-Locked Loop (PLL) option, allowing operation from a low-frequency external crystal or resonator while the internal bus runs at the higher 8MHz rate.
Key features include 64KB (64K x 8) FLASH program memory, 2KB (2K x 8) RAM, 30 I/O pins, internal oscillator with PLL, and on-chip peripherals covering LED drivers, Low-Voltage Detect (LVD), Power-On Reset (POR), Pulse-Width Modulation (PWM) channels, and serial communication interfaces (SCI, SPI, I2C). The 5V single-supply operation simplifies analog interface design.
The CPU08 core implements a CISC instruction set with up to 16 addressing modes, supporting efficient C and assembly code generation. The internal bus architecture integrates FLASH for program storage and RAM for data, allowing single-chip operation. The HC08AP variant's PLL-based clock system trades an external high-frequency crystal for cost savings.
Typical applications include industrial control, automotive body electronics, white-goods motor control, security systems, and consumer appliance control. Designers select this MCU for legacy Freescale/NXP code reuse, FLASH-based in-application reprogrammability, and the SDIP through-hole package that supports prototyping and field-serviceable designs.
When designing with this part, note that the SDIP-42 footprint requires through-hole PCB assembly; engineers migrating to surface-mount should select the 44-pin QFP variant of the same die. Always confirm FLASH endurance (typically 100K cycles) and retention specifications against the in-application update requirements.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.
Bộ thay thế dễ dàng lắp đặt cho MC908AP64ACBE — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MC908AP64ACBE (cùng hình factor và footprint) — khác nhau ở Mounting Type, Oscillator Type, Packaging, ADC, Core.
MC908AP32ACBE
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MC908AP16ACBE
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MC908AP64ACBE Tỷ lệ tối đa & tính chất điện
| Core Processor | HC08 CPU08 |
| Core Size | 8-Bit |
| Core Architecture | CISC |
| Series | HC08 / MC908AP64 |
| Speed (Bus Frequency) | 8 MHz |
| Program Memory Size | 64 KB (64K x 8) FLASH |
| RAM Size | 2 KB (2K x 8) |
| EEPROM Size | Not present |
| Number of I/O | 30 |
| Connectivity | I2C, IRSCI, SCI, SPI |
| Peripherals | LED driver, LVD, POR, PWM |
| Oscillator Type | Internal (with PLL, HS-OSC version) |
| Điện áp cung cấp hoạt động | 5 V |
| Hộp / Vỏ | 42-SDIP (0.600", 15.24mm) |
| Kiểu lắp đặt | Through-Hole |
| Packaging | Tube |
Cấu hình chân MC908AP64ACBE
| Chân 1 | IRQ — External interrupt request |
| Chân 2 | PTA0 — Port A I/O bit 0 |
| Chân 3 | PTA1 — Port A I/O bit 1 |
| Chân 4 | PTA2 — Port A I/O bit 2 |
| Chân 5 | PTA3 — Port A I/O bit 3 |
| Chân 6 | VDD — Supply voltage (5V) |
| Chân 7 | VSS — Ground |
| Chân 8 | PTB0 — Port B I/O bit 0 |
| Chân 9 | PTB1 — Port B I/O bit 1 |
| Chân 10 | PTB2 — Port B I/O bit 2 |
| Chân 11 | PTB3 — Port B I/O bit 3 |
| Chân 12 | PTB4 — Port B I/O bit 4 |
| Chân 13 | PTB5 — Port B I/O bit 5 |
| Chân 14 | PTB6 — Port B I/O bit 6 |
| Chân 15 | PTB7 — Port B I/O bit 7 |
| Chân 16 | PTC0 — Port C I/O bit 0 |
| Chân 17 | PTC1 — Port C I/O bit 1 |
| Chân 18 | PTC2 — Port C I/O bit 2 |
| Chân 19 | PTC3 — Port C I/O bit 3 |
| Chân 20 | PTC4 — Port C I/O bit 4 |
| Chân 21 | PTC5 — Port C I/O bit 5 |
| Chân 22 | PTC6 — Port C I/O bit 6 |
| Chân 23 | PTC7 — Port C I/O bit 7 |
| Chân 24 | PTD0 — Port D I/O bit 0 (TxD) |
| Chân 25 | PTD1 — Port D I/O bit 1 (RxD) |
| Chân 26 | PTD2 — Port D I/O bit 2 |
| Chân 27 | PTD3 — Port D I/O bit 3 |
| Chân 28 | PTD4 — Port D I/O bit 4 |
| Chân 29 | PTD5 — Port D I/O bit 5 |
| Chân 30 | OSC1 — Oscillator input |
| Chân 31 | OSC2 — Oscillator output |
| Chân 32 | VDD — Supply voltage (5V) |
| Chân 33 | VSS — Ground |
| Chân 34 | PTE0 — Port E I/O bit 0 |
| Chân 35 | PTE1 — Port E I/O bit 1 |
| Chân 36 | PTE2 — Port E I/O bit 2 |
| Chân 37 | PTE3 — Port E I/O bit 3 |
| Chân 38 | RESET — Reset input (active low) |
| Chân 39 | PTE4 — Port E I/O bit 4 |
| Chân 40 | PTE5 — Port E I/O bit 5 |
| Chân 41 | PTE6 — Port E I/O bit 6 |
| Chân 42 | PTE7 — Port E I/O bit 7 |
Ứng dụng tiêu biểu
MC908AP64ACBE phù hợp cho 6 Áp dụngs: Industrial Control Systems, Automotive Body Electronics, White Goods / Appliance Control, Security and Access Control Panels, Consumer Electronics Remote Controllers, HVAC Control Modules.
Industrial Control Systems
The MC908AP64ACBE's 8MHz HC08 core, 64KB FLASH, and integrated PWM channels make it suitable for industrial PLC interfaces, sensor conditioning boards, and discrete machine control modules. Its 30 I/O pins handle multiple digital inputs and outputs simultaneously, while the SCI/SPI interfaces connect to operator panels or supervisory controllers. The on-chip LED drivers simplify status indication without external transistors. Operating from a 5V supply and featuring Low-Voltage Detect (LVD) and Power-On Reset (POR), the part tolerates industrial power-rail transients and brown-outs typical of factory environments. Engineers value the HC08 instruction set for compact, deterministic control code in legacy industrial installations.
Được đề xuất
Automotive Body Electronics
The MC908AP64ACBE fits legacy automotive body-control modules including central locking, mirror control, and interior lighting controllers. Its 64KB FLASH accommodates protocol stacks (LIN, KWP2000) and feature logic, while the 2KB RAM supports runtime data buffers. The PWM channels drive LED dimming and motor speed control for fans and actuators. SCI and SPI interfaces link to body control networks, and the integrated LVD/POR ensure clean startup under automotive battery transients. The 42-SDIP package suits low-volume aftermarket modules and field-replaceable assemblies where through-hole construction is preferred for serviceability.
Được đề xuất
White Goods / Appliance Control
The MC908AP64ACBE is widely used in washing-machine controllers, dishwasher control boards, refrigerator display modules, and microwave oven interfaces. Its 64KB FLASH holds appliance-specific firmware including motor control algorithms, user-interface logic, and fault detection routines. The integrated PWM channels drive variable-speed motor control, while SCI/SPI interfaces connect to user-interface boards, sensor arrays, and display drivers. The internal oscillator with PLL simplifies BOM by eliminating external high-frequency crystals, reducing cost in cost-sensitive appliance markets. The 5V supply aligns with typical appliance power architectures.
Được đề xuất
Security and Access Control Panels
The MC908AP64ACBE suits legacy security alarm panels, access-control keypads, and intrusion-detection modules. Its 64KB FLASH stores zone-configuration logic, communication protocols, and event-logging firmware, while the 2KB RAM buffers sensor polling and keypad debounce state. The integrated SCI provides RS-232/485 communication to central monitoring stations, and SPI interfaces connect to keypad scanners and expansion modules. The on-chip LED drivers directly drive panel status LEDs without external transistors, saving PCB area. The 42-SDIP package supports field-serviceable panel designs where through-hole replacement is advantageous.
Được đề xuất
Consumer Electronics Remote Controllers
The MC908AP64ACBE is used in universal remote controllers, smart-home hubs, and consumer audio control interfaces. Its 64KB FLASH accommodates IR protocol libraries, button-mapping tables, and feature-mode firmware. The integrated IRSCI peripheral directly handles infrared encoding/decoding, offloading timing-critical tasks from the CPU. SCI and I2C interfaces connect to wireless modules, displays, and audio codecs. Low-power STOP/WAIT modes extend battery life in handheld remotes, while the internal oscillator eliminates the need for external high-frequency crystals. The 30 I/O pins support matrix-scanned keypads and LED feedback.
Được đề xuất
HVAC Control Modules
The MC908AP64ACBE fits HVAC thermostat controllers, fan-speed controllers, and zone damper actuators. Its 64KB FLASH holds scheduling logic, PID control algorithms, and communication firmware, while the 2KB RAM supports temperature history buffers and runtime state. The PWM channels regulate fan speed and damper position, while the SCI/SPI interfaces connect to indoor/outdoor unit communication networks. The integrated ADC channels (on related family members) measure temperature sensors, and the LVD/POR ensure clean operation across HVAC power-supply fluctuations. The 42-SDIP package suits legacy through-hole HVAC control boards.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MC908AP64ACBE — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MC908AP32ACBE | MC908AP16ACBE |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors - same brand | NXP Semiconductors - same brand |
| Package | 42-SDIP (0.600") | 42-SDIP - same | 42-SDIP - same |
| FLASH Memory | 64 KB | 32 KB (-50%) | 16 KB (-75%) |
| RAM Size | 2 KB | 2 KB - same | 2 KB - same |
| CPU Core | HC08 CPU08 | HC08 CPU08 - same | HC08 CPU08 - same |
| Bus Frequency | 8 MHz | 8 MHz - same | 8 MHz - same |
| Number of I/O | 30 | 30 - same | 30 - same |
| Supply Voltage | 5 V | 5 V - same | 5 V - same |
| Lifecycle Status | Obsolete | Obsolete | Obsolete |
Bảo phân biệt quan trọng
- High-speed internal oscillator variant (vsMC908AP64AB (low-speed external oscillator version))
- Maximum FLASH in the 42-SDIP package (vsMC908AP32ACBE (32KB) and MC908AP16ACBE (16KB))
- Through-hole SDIP package (vsMC908AP64CFBE (44-QFP surface-mount))
Ghi chú thiết kế
The MC908AP64ACBE operates from a single 5V supply with internal LVD and POR. Decouple VDD with a 100nF ceramic capacitor placed within 5mm of each VDD pin, plus a 10uF bulk tantalum or electrolytic capacitor at the supply entry point. The internal voltage regulator feeds the FLASH memory; ensure stable 5V rail during in-application reprogramming to avoid partial-write corruption of FLASH pages.
The MC908AP64ACBE is the high-speed internal oscillator variant of the HC08AP family. An external 32kHz watch crystal or 1-8MHz resonator can be used with the internal PLL to derive the 8MHz bus clock, eliminating external high-frequency crystals and reducing BOM cost. Layout the OSC1/OSC2 traces short and surrounded by ground pour to minimize EMI pickup; route away from PWM switching signals.
FLASH program memory on the MC908AP64ACBE has a limited erase/write endurance (typically 10K-100K cycles depending on revision). Implement wear-leveling or EEPROM emulation techniques for non-volatile data storage. Do not exceed 5.5V on VDD or allow reverse polarity - the part lacks internal ESD protection diodes on the supply pins. Use the LVD to detect brown-out conditions before FLASH writes commence.
Thông tin tuân thủ
Compliance status not provided in verified data. The HC08AP family pre-dates strict RoHS enforcement; non-RoHS lead-bearing SDIP variants may exist. Confirm with distributor for specific lot compliance.
