NXP Semiconductors

MC9S08PB16MTG - 8-Bit 20MHz MCU with 16KB Flash | NXP

MPN: MC9S08PB16MTG ✓ Hoạt động
2.7 V to 5.5 V Vdss 16-TSSOP Package 20 MHz Speed 16 KB (16K x 8) Memory
MOQ: 1 |

MC9S08PB16MTG Tóm tắt

NXP Semiconductors MC9S08PB16MTG is an 8-bit S08 microcontroller with a 20 MHz maximum clock frequency, 16 KB of flash program memory, 1 KB of RAM, and 14 I/O pins, housed in a 16-pin TSSOP package. It operates from 2.7 V to 5.5 V and integrates a 12-bit ADC, analog comparator, amplifier, I2C interface, and flexible timers for compact general-purpose embedded control.

A microcontroller is a programmable semiconductor that combines a CPU core, memory, peripherals, and interface circuitry on one integrated circuit. The S08 MCU belongs to the microcontroller hierarchy within embedded processors and semiconductor devices. MC9S08PB16MTG targets cost-sensitive embedded systems that require more than simple logic control but do not need the processing capability or power consumption of a 32-bit MCU.

The principal features include an 8-bit S08 CPU operating up to 20 MHz, 16 KB of flash memory for firmware storage, and 1 KB of data RAM. The analog subsystem provides a 12-bit ADC and comparator, while the integrated amplifier and analog multiplexer reduce the need for external signal-conditioning components. An I2C interface supports connection to sensors, EEPROMs, and other serial peripherals, and flexible timer resources support periodic measurement, motor timing, and control-loop functions.

The S08 architecture combines a compact 8-bit processing core with on-chip flash and RAM, providing deterministic behavior for embedded control. Its 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V systems. The 14 available I/O pins provide flexibility for digital interfaces, while the 12-bit ADC supports analog sensing without requiring a separate converter. An integrated comparator can implement threshold detection or basic analog switching functions.

Typical applications include industrial control panels, small sensor nodes, appliance controllers, LED lighting systems, battery-powered instruments, and compact motor-control boards. The I2C interface is particularly useful in designs combining environmental sensing with a serial EEPROM. The ADC can monitor potentiometers, thermistors, and resistive sensor bridges, while the timers establish reliable sampling or actuator-control intervals without excessive software overhead.

Designers should allocate decoupling capacitors close to the supply pins and route analog inputs away from switching nodes. Firmware must account for the 1 KB RAM limit and should avoid unnecessary dynamic allocation. ADC averaging or calibration can improve measurement consistency, and the selected sensor impedance should be checked against the analog-input sampling requirements in the manufacturer datasheet.

This page combines the device specifications, sourcing guidance, package information, drop-in family alternatives, and practical embedded-design considerations. It also identifies engineering differences among same-footprint S08 options, helping teams choose flash capacity, analog resources, and operating grade without changing the PCB footprint.

Bộ thay thế dễ dàng lắp đặt cho MC9S08PB16MTG — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MC9S08PB16MTG (cùng hình factor và footprint) — khác nhau ở Maximum Operating Temperature, Minimum Operating Temperature, Number of I/O Pins, Package, Serial Interface.

NXP Semiconductors
Maximum Operating Temperature: +125 C
Minimum Operating Temperature: -40 C
Number of I/O Pins: 14 I/O
So sánh với MC9S08PB16MTG →

MC9S08PB32MTG

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 16-TSSOP
Flash increases from 16 KB to 32 KB, a 100% increase, while retaining the same S08PB family footprint.

📋 Tham chiếu thay thế (không có trong danh mục)

MC9S08PB12MTG

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 16-TSSOP
Flash decreases from 16 KB to 12 KB, a 25% reduction, while retaining the same S08PB family footprint.

📋 Tham chiếu thay thế (không có trong danh mục)

MC9S08PB8MTG

✅ Drop-In ⚠️ Thông số chưa được xác minh
NXP Semiconductors
📦 16-TSSOP
8-bit S08P microcontroller · 20 MHz · 8 KB · 8K x 8 bit · 1 KB · 8 bit · 12 bit · 2.7 V to 5.5 V

Liên hệ để biết giá

Xem tài liệu →

MC9S08PA16MTG

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 16-TSSOP
Uses the related S08PA family with 16 KB flash; family pin compatibility is retained, but peripheral implementation must be checked.

📋 Tham chiếu thay thế (không có trong danh mục)

MC9S08PA8MTG

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 16-TSSOP
Uses the related S08PA family with 8 KB flash, a 50% memory reduction; peripheral implementation must be checked.

📋 Tham chiếu thay thế (không có trong danh mục)

MC9S08PB16MTG Tỷ lệ tối đa & tính chất điện

CPU Core 8-bit S08
Tần số xung maksimum 20 MHz
Flash Program Memory 16 KB (16K x 8)
Data RAM 1 KB
Bề rộng đường dữ liệu 8 bit
ADC Resolution 12 bit
Number of I/O Pins 14
Điện áp cung cấp hoạt động 2.7 V to 5.5 V
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Hộp 16-TSSOP
Package Width 4.40 mm
Kiểu lắp đặt Surface Mount
Serial Interface I2C
Analog Features 12-bit ADC, analog comparator, and amplifier
Timer Features Flexible timers
Series S08
Trạng thái vòng đời Active

Cấu hình chân MC9S08PB16MTG

TSSOP-16 Package Pinout Diagram TSSOP-16 4.4x5mm, P0.65mm, JEDEC MO-153. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 TSSOP-16
Chân 1 PTB0 — Port B timer or general-purpose I/O pin
Chân 2 PTB1 — Port B timer or general-purpose I/O pin
Chân 3 PTB2 — Port B timer or general-purpose I/O pin
Chân 4 PTB3 — Port B timer or general-purpose I/O pin
Chân 5 VDD — Power supply input
Chân 6 PTA0 — Port A general-purpose or analog I/O pin
Chân 7 PTA1 — Port A general-purpose or analog I/O pin
Chân 8 PTA2 — Port A general-purpose or analog I/O pin
Chân 9 PTA3 — Port A general-purpose or analog I/O pin
Chân 10 PTA4 — Port A general-purpose or analog I/O pin
Chân 11 PTA5 — Port A general-purpose or analog I/O pin
Chân 12 VSS — Ground reference
Chân 13 PTA6 — Port A general-purpose or analog I/O pin
Chân 14 PTA7 — Port A general-purpose or analog I/O pin
Chân 15 PTB4 — Port B timer or general-purpose I/O pin
Chân 16 PTB5 — Port B timer or general-purpose I/O pin

Ứng dụng tiêu biểu

MC9S08PB16MTG phù hợp cho 6 Áp dụngs: Industrial Sensor Interface, Appliance Control Panel, Battery-Powered Environmental Monitor, LED Lighting Controller, Compact Motor Controller, Networked Sensor Gateway.

🏭

Industrial Sensor Interface

The MC9S08PB16MTG fits industrial sensor interfaces that require local analog measurement without the cost of a higher-performance processor. Its 12-bit ADC can digitize resistive sensors, while the 20 MHz S08 core provides enough timing margin for filtering, calibration, and control logic. The 16 KB flash stores application firmware and parameter tables, and the 1 KB RAM supports bounded sample buffers. With I2C available, the controller can also manage sensors or configuration EEPROMs. A 2.7 V to 5.5 V operating range supports both 3.3 V and 5 V field equipment, provided external signal conditioning matches the ADC input limits.

🔧

Appliance Control Panel

The MC9S08PB16MTG is appropriate for appliance control panels that combine touch or potentiometer inputs, indicator outputs, and serial configuration devices. Its 14 I/O pins can support keys, status signals, relays, and display-control lines, while the 12-bit ADC supports analog panel controls without an external converter. The 16 KB flash provides practical room for state machines, calibration, and communication protocols, and the 1 KB RAM is sufficient for bounded display and input buffering. The MCU's I2C interface simplifies connection to an EEPROM or sensor, while its 2.7 V to 5.5 V range accommodates common appliance control boards.

🧩

Battery-Powered Environmental Monitor

The MC9S08PB16MTG can serve as the controller in a battery-powered environmental monitor using resistive or ratiometric sensors. Its 12-bit ADC provides useful resolution for temperature, humidity, and light measurements, while the 8-bit CPU performs sampling, averaging, threshold detection, and data formatting. The 16 KB flash accommodates protocol handlers and calibration coefficients, and the 1 KB RAM avoids the need for an external memory device in compact monitoring products. I2C permits connection to serial sensors or a small external EEPROM. The 2.7 V minimum operating voltage also gives designers flexibility when using regulated power derived from a single-cell source.

💡

LED Lighting Controller

The MC9S08PB16MTG is well suited to compact LED lighting controllers that require deterministic timing, simple dimming, and low-cost communication. Flexible timers can generate repeatable PWM or switching intervals, and the available I/O pins can drive channel-enable signals or interface to an LED driver. The 16 KB flash is useful for storing lighting scenes, calibration, and communication logic, while the 1 KB RAM supports multiple channels and state management. The MCU's 2.7 V to 5.5 V operating range supports low-voltage control boards and conventional 5 V logic, provided the LED power stage has its own protection and thermal design.

⚡

Compact Motor Controller

The MC9S08PB16MTG can support compact motor-control systems where the MCU performs sequencing, speed-reference interpretation, and fault supervision while an external power stage handles the motor current. Its 20 MHz maximum clock supports responsive timer-based control, and the 14 I/O pins provide encoder inputs, direction controls, enable signals, and status monitoring. The 16 KB flash accommodates motion tables and control firmware, while the 1 KB RAM is adequate for bounded position or speed state. The 12-bit ADC can monitor a current or position signal if its input limits match the sensing circuit, and the 2.7 V to 5.5 V range supports separate logic and power domains.

🌐

Networked Sensor Gateway

The MC9S08PB16MTG can act as a protocol-conversion gateway between an I2C sensor and a serial host interface. Its 16 KB flash provides room for protocol frames, device filtering, and configuration commands, while the 1 KB RAM can hold bounded transmit and receive buffers. The 12-bit ADC supports local analog supervision, and the flexible timers handle periodic sampling and communication timing. Its 2.7 V to 5.5 V operating range allows deployment in 3.3 V sensor nodes or 5 V embedded systems. The compact 16-TSSOP package also helps when the gateway must fit alongside a connector, isolated interface, or radio module.

What is the MC9S08PB16MTG microcontroller?
The MC9S08PB16MTG is an active NXP Semiconductors 8-bit S08 microcontroller designed for general-purpose embedded control. It operates up to 20 MHz and provides 16 KB of flash memory, 1 KB of RAM, 14 I/O pins, a 12-bit ADC, an analog comparator, an amplifier, I2C, and flexible timers in a 16-TSSOP package. According to the NXP product page and MC9S08PB16 datasheet, it combines a compact CPU with analog and serial peripherals for embedded sensing, monitoring, and actuator-control systems.
What are the key specifications of MC9S08PB16MTG that engineers should know?
The MC9S08PB16MTG combines an 8-bit S08 core, 20 MHz maximum operating frequency, 16 KB flash memory, 1 KB RAM, and 14 I/O pins. Its operating supply range is 2.7 V to 5.5 V, and the device includes a 12-bit ADC, analog comparator, amplifier, I2C interface, and flexible timers. The NXP product information and MC9S08PB16 datasheet identify the MCU as a 16-TSSOP device, making it suitable for compact embedded systems requiring both digital control and analog measurement.
What is the operating voltage of MC9S08PB16MTG?
The MC9S08PB16MTG operates from 2.7 V to 5.5 V. This range supports 3.3 V and 5 V embedded designs, including battery-powered instruments and industrial controller boards. According to the MC9S08PB16 datasheet and product listings, the device is a 5 V-capable full-featured MCU with rich analog resources. Designers should maintain suitable bypass capacitance at the supply pins and verify that every external sensor, transceiver, and actuator shares a compatible logic voltage.
How much flash and RAM does MC9S08PB16MTG have?
The MC9S08PB16MTG contains 16 KB of flash program memory and 1 KB of data RAM. Its flash is organized as 16K x 8, while the S08 CPU and data bus are both 8 bits wide. The NXP MC9S08PB16 datasheet describes the MCU as a full-featured S08 device with analog resources. The 1 KB RAM should be considered during firmware planning, particularly when buffering samples, maintaining communication frames, or supporting multiple interrupt-driven peripherals.
Where can I download the MC9S08PB16MTG datasheet PDF?
The official MC9S08PB16MTG information and datasheet are available through the NXP product page at https://www.nxp.com/part/MC9S08PB16MTG. The family document is titled MC9S08PB16 Datasheet and covers the 8-bit S08 CPU, 16 KB flash configuration, memory map, peripherals, electrical characteristics, and package information. Use the NXP document for authoritative pin names, timing, ADC behavior, clock requirements, and programming details before laying out or qualifying a new PCB.
Where can I find the MC9S08PB16MTG pinout?
The MC9S08PB16MTG pinout is defined in the pin-description table of the NXP MC9S08PB16 datasheet and in the NXP product documentation. The device uses a 16-pin TSSOP package with 14 I/O pins. When assigning PCB tracks, compare the datasheet pin-description table with the package drawing and expose the programming and debug interface required by the selected development system. The MC9S08PB16MTG suffix identifies the specified package and temperature-grade ordering configuration.
Is MC9S08PB16MTG suitable for battery-powered sensor nodes?
The MC9S08PB16MTG is suitable for battery-powered sensor nodes when the design stays within its 2.7 V to 5.5 V operating range and accounts for the 1 KB RAM limit. Its 12-bit ADC can read resistive sensors, and the I2C interface can connect serial sensors or EEPROMs. According to the NXP MC9S08PB16 datasheet, the S08PB family integrates analog comparison and timing resources that reduce external component count. Low-power behavior should be confirmed for the exact clocking, peripheral, and sleep configuration used in the product.
MC9S08PB16MTG vs MC9S08PB32MTG - which is better for firmware-heavy designs?
Choose MC9S08PB32MTG when firmware size is the deciding constraint because it provides 32 KB of flash instead of the MC9S08PB16MTG's 16 KB. Both devices belong to the NXP S08PB family and use the same 16-TSSOP footprint, so the larger-memory part can simplify upgrades without requiring a package change. Compare the complete datasheet electrical tables, pin functions, memory maps, and errata before substitution, because flash capacity alone does not establish complete application equivalence.
When should I choose MC9S08PB16MTG over a smaller S08PB device?
Choose MC9S08PB16MTG when the firmware, boot logic, or application code requires more than the flash capacity of a smaller S08PB option while 16 KB remains sufficient. It retains the 8-bit S08 core, 20 MHz maximum clock, 1 KB RAM, analog resources, and 16-TSSOP package arrangement associated with the family. The NXP MC9S08PB16 datasheet should guide the final selection, especially when a new PCB will support several memory-density options.
What can replace MC9S08PB16MTG without changing the PCB footprint?
The closest drop-in options are pin-compatible members of the NXP S08PB family in the same 16-TSSOP footprint, including MC9S08PB8MTG, MC9S08PB12MTG, and MC9S08PB32MTG. Their flash capacities differ from the MC9S08PB16MTG's 16 KB, so each substitution must be checked for code size, pin functions, electrical limits, and any device-specific errata. Use the NXP family documentation to confirm compatibility before treating any candidate as a production replacement.
What is the best NXP drop-in replacement for MC9S08PB16MTG?
MC9S08PB32MTG is the most practical higher-capacity NXP drop-in candidate because it retains the S08PB architecture and 16-TSSOP footprint while increasing flash from 16 KB to 32 KB. MC9S08PB8MTG and MC9S08PB12MTG are lower-memory alternatives for applications that do not use the full 16 KB program space. No cross-brand equivalent is confirmed here; validate the selected NXP MPN against pin assignments, clocking, electrical characteristics, firmware constraints, and errata.
Where can I buy MC9S08PB16MTG online?
Use the Request a Quote form on this page to inquire about MC9S08PB16MTG availability, order quantity, packaging, and current lead time. The NXP product page identifies the device as active, and distributor listings identify it as an S08 microcontroller in a 16-TSSOP package. Commercial confirmation should be obtained through the quote process so that the order reflects the current supply status, exact MPN suffix, and required quantity rather than a static market listing.
What is the price of MC9S08PB16MTG?
The current commercial price for MC9S08PB16MTG is obtained through the Request a Quote form on this page. Quote handling allows the order quantity, package, delivery location, and supply conditions to be considered without publishing a stale figure. The manufacturer identifies the exact MPN as active, and the product is listed in a 16-TSSOP package. Submit the inquiry with your required quantity and packaging preference for a current purchasing response.
What is the lead time and stock status for MC9S08PB16MTG?
Request current stock, minimum order quantity, and lead time for MC9S08PB16MTG through the Request a Quote form on this page. The NXP product page labels the device as active, while individual channel inventory can change independently of manufacturer lifecycle status. The quote form allows the procurement team to confirm the exact suffix, quantity, and delivery requirements rather than relying on a potentially outdated stock indication.
Is MC9S08PB16MTG the same as MC9S08PA16MTG?
The MC9S08PB16MTG and MC9S08PA16MTG are not automatically equivalent even though both can provide 16 KB of flash in related NXP S08 product families. The PB and PA families may differ in peripheral implementation, internal architecture, memory organization, and device-specific behavior. According to the NXP family documentation, S08 families can be scalable and pin-compatible, but a production substitution still requires comparison of pin functions, timing, ADC behavior, clocking, memory, and errata for the exact orderable MPNs.

Dữ liệu tham khảo kỹ thuật cho MC9S08PB16MTG — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Select MC9S08PB16MTG for compact 8-bit embedded systems that need 16 KB of flash, 1 KB of RAM, a 12-bit ADC, I2C, and flexible timers in a 16-TSSOP package. Choose MC9S08PB32MTG when firmware growth makes 16 KB insufficient but retaining the S08PB footprint is valuable. Choose MC9S08PB12MTG or MC9S08PB8MTG only when the firmware fits the reduced flash area and the same electrical and peripheral behavior is confirmed. MC9S08PA16MTG may suit related S08PA designs, but compare pin multiplexing, analog behavior, memory map, timing, and errata before production use. No cross-brand replacement is asserted because the available cross-reference results do not establish one that is pin-to-pin and functionally equivalent. Final qualification should include power, temperature, EMC, firmware, and programming-tool verification.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MC9S08PB32MTG MC9S08PB12MTG MC9S08PB8MTG MC9S08PA16MTG MC9S08PA8MTG
Package 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP 16-TSSOP
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
CPU Core 8-bit S08 8-bit S08 8-bit S08 8-bit S08 8-bit S08 8-bit S08
Flash Memory 16 KB 32 KB 12 KB 8 KB 16 KB 8 KB
Number of I/O Pins 14 14 14 14 14 14

Bảo phân biệt quan trọng

  • Provides 16 KB of flash within the compact 16-TSSOP S08PB family (vsMC9S08PB8MTG)
  • Maintains the same family footprint while allowing firmware expansion (vsMC9S08PB32MTG)
  • Uses a 14-I/O S08PB configuration with integrated analog conversion (vsMC9S08PA16MTG)

Ghi chú thiết kế

Place the MCU supply bypass capacitor adjacent to the VDD and VSS pins and keep the connection to ground short. The 2.7 V to 5.5 V operating range does not remove the need for local decoupling because the 20 MHz S08 core can create fast switching current. Route high-current loads and inductive traces away from the MCU and analog pins. Confirm the exposed pad and thermal-via requirements against the manufacturer package drawing before releasing the PCB footprint.

Treat analog inputs as sensitive nodes even though the MCU includes a 12-bit ADC, comparator, and amplifier. Keep analog traces short, separate them from clock and switching-node routing, and ground the analog return path carefully. Sensor impedance and acquisition time must be checked against the ADC sampling characteristics in the manufacturer datasheet. If the source impedance is high, add a local buffer or capacitor rather than increasing software averaging to compensate for an unsuitable signal source.

Do not assume that a same-package S08 variant is interchangeable without checking memory capacity, pin multiplexing, peripheral differences, and errata. The 1 KB RAM limit can cause failures if firmware uses stack-heavy libraries, large buffering, or dynamic allocation. Favor static allocation and bounded buffers, preserve required reset and clock behavior, and test the production firmware against the exact replacement MPN. A package-compatible footprint alone is not sufficient for a production substitution.

Choose the external supply and decoupling network so the MCU remains within its 2.7 V to 5.5 V operating range under transient load. The 20 MHz clock does not imply that the MCU directly powers the load; use suitable drivers for motors, LEDs, relays, or high-current sensors. Separate sensitive analog rails from digital activity where practical, and account for startup current, peripheral loading, and the voltage drop across any series resistance or regulator in the final power-budget calculation.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Compliance status must be confirmed for the exact orderable MPN using the current NXP product documentation or supplier declarations. The available product information confirms an active lifecycle state but does not establish the requested compliance classifications.

Dữ liệu được xác minh vào: 2026-11-20 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MC9S08PB16MTG datasheet MC9S08PB16MTG datasheet pdf MC9S08PB16MTG pinout MC9S08PB16MTG specifications MC9S08PB16MTG price MC9S08PB16MTG stock MC9S08PB16MTG replacement MC9S08PB16MTG equivalent MC9S08PB16MTG vs MC9S08PB32MTG NXP MC9S08PB16MTG MC9S08PB16 16-TSSOP pinout MC9S08PB16 application circuit

Các bộ phận và thuật ngữ liên quan

NXP Semiconductors MC9S08PB16MTG MC9S08PB32MTG MC9S08PB12MTG MC9S08PB8MTG MC9S08PA16MTG MC9S08PA8MTG S08 core 8-bit microcontroller embedded processor semiconductor 16-TSSOP TSSOP package family surface-mount device 12-bit ADC analog comparator I2C flash memory RAM 20 MHz clock 2.7 V to 5.5 V operating range industrial control environmental monitoring
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ