MC9S08RD60PE 8-Bit 8MHz 60KB Flash 28-PDIP MCU
MPN: MC9S08RD60PE ✗ Cuối đờiMC9S08RD60PE Tóm tắt
A microcontroller is a semiconductor device that combines a processor core, memory, peripheral interfaces, and control logic into one integrated component. The MC9S08RD60PE belongs to the S08 8-bit microcontroller family and provides a dedicated embedded platform for sensing, control, communication, and actuator functions. Its integrated flash memory allows firmware and application code to be stored directly on the device.
The principal specifications identify an 8-bit architecture, 8 MHz clocking, and 60 KB of flash organized as 60K by 8 bits. The 28-PDIP mechanical package is suitable for through-hole PCB assembly, prototyping, education, and legacy industrial equipment where a leaded package is preferred. The operating range of 1.8 V to 3.6 V supports low-voltage embedded systems, while the stated temperature range targets commercial-temperature applications.
Typical uses include motor and relay control, industrial instrumentation, appliance controllers, battery-powered equipment, and embedded educational projects. The 8-bit processing architecture is appropriate for straightforward control loops, digital I/O expansion, status monitoring, and low-bandwidth peripheral communication. The 60 KB flash capacity provides space for application firmware, configuration tables, calibration constants, and communication routines.
Designers should confirm the complete electrical limits, peripheral allocation, clock configuration, programming method, and pin multiplexing against the manufacturer datasheet before releasing a PCB. Because the PDIP package exposes through-hole leads, layout planning should include the device footprint, programming connector, decoupling strategy, and any external crystals, oscillators, or interface components.
This product page consolidates the verified device identity, package, memory, clock, voltage, temperature, sourcing information, and engineering guidance for designers evaluating the MC9S08RD60PE in embedded control systems.
Bộ thay thế dễ dàng lắp đặt cho MC9S08RD60PE — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếMC9S08RD60PE Tỷ lệ tối đa & tính chất điện
| Product Type | 8-bit S08 microcontroller |
| Manufacturer | NXP Semiconductors |
| Tần số xung maksimum | 8 MHz |
| Flash Memory | 60 KB (60K x 8 bits) |
| Architecture | 8-bit |
| Operating Voltage | 1.8 V to 3.6 V |
| Nhiệt độ hoạt động | 0 °C to 70 °C |
| Hộp | 28-PDIP |
| Kiểu lắp đặt | Through-hole |
| Program Memory Type | Built-in flash |
| Program Memory Organization | 60K x 8 bits |
| Số lượng chân | 28 pins |
| Lead-Free Status | Lead-free |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân MC9S08RD60PE 28-pdip
Cấu hình chân cho MC9S08RD60PE (28-pdip gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MC9S08RD60PE.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MC9S08RD60PE phù hợp cho 7 Áp dụngs: Industrial Monitoring and Control, Appliance and Household Controller, Battery-Powered Embedded Device, Educational Microcontroller Platform, Motor and Relay Sequencer, Instrumentation Data Acquisition, Building Access and Security Control.
Industrial Monitoring and Control
The MC9S08RD60PE fits industrial monitoring and control panels that require an 8-bit controller, 60 KB of program storage, and operation from a 1.8 V to 3.6 V supply. Its 8 MHz processing rate supports basic status scanning, operating-mode control, local HMI updates, and configurable logic. The 28-PDIP package simplifies through-hole assembly and repair in control boards that need a proven S08 software environment.
Được đề xuất
Appliance and Household Controller
The MC9S08RD60PE is appropriate for appliance controllers that coordinate operating modes, user inputs, sensors, displays, and actuator outputs. Its 60 KB flash provides storage for control state machines, calibration data, and product-specific behavior, while the 1.8 V to 3.6 V range supports compact low-voltage electronics. The 8-bit S08 platform is especially practical for cost-sensitive designs using established appliance-control firmware.
Được đề xuất
Battery-Powered Embedded Device
The MC9S08RD60PE can serve as the control processor in a low-voltage battery-powered device that periodically wakes, reads sensors, updates a local display, and controls an actuator. Its 1.8 V to 3.6 V operating range is compatible with low-energy system rails, and 60 KB of flash can hold compact application firmware. Power consumption should be evaluated using the processor’s active and low-power modes in the datasheet.
Được đề xuất
Educational Microcontroller Platform
The MC9S08RD60PE supports educational projects involving 8-bit microcontroller programming, digital logic, sensors, timing, and embedded control. Its 60 KB flash provides enough storage for classroom firmware, while the 28-PDIP package is straightforward to mount on perforated boards and solder by hand. The established S08 architecture also helps learners focus on instruction behavior, memory organization, and peripheral configuration.
Được đề xuất
Motor and Relay Sequencer
The MC9S08RD60PE can implement deterministic motor, solenoid, or relay sequencing where the application does not require a high-performance real-time processor. The 8 MHz 8-bit architecture and 60 KB flash support event tables, timing routines, interlocks, and diagnostic logging. Suitable external drivers, protection networks, and isolation must be added according to the load and safety requirements.
Được đề xuất
Instrumentation Data Acquisition
The MC9S08RD60PE is suitable for compact instrumentation that acquires sensor data, applies calibration, formats measurements, and reports results over a simple communications interface. Its 60 KB flash can retain configuration and calibration tables, and the 8 MHz clock supports moderate control-loop rates. Analog front-end components and communication transceivers should be selected separately to match the required accuracy and bus standard.
Được đề xuất
Building Access and Security Control
The MC9S08RD60PE can coordinate keypad inputs, lock or relay outputs, status indicators, and event logging in a building-access controller. The integrated flash provides room for firmware and configuration, while the 28-PDIP package supports through-hole product construction. Deployment requires appropriate consideration of relay drivers, fail-safe behavior, communication security, and environmental protection.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MC9S08RD60PE — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
Choose a different MCU when the design needs more RAM, faster processing, additional peripherals, a different package, a wider temperature range, or a current long-term supply commitment. Do not treat a nominally similar 8-bit part as drop-in compatible without checking the pinout, memory map, clock architecture, peripheral mapping, programming system, and supply limits. No confirmed drop-in alternatives were established, so a redesign or firmware migration should be evaluated explicitly rather than assumed to be a simple substitution.
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | NXP Semiconductors |
| Package | 28-PDIP |
| Architecture | 8-bit S08 |
| Maximum Clock Frequency | 8 MHz |
| Flash Memory | 60 KB (60K x 8 bits) |
| Operating Voltage | 1.8 V to 3.6 V |
| Operating Temperature | 0 °C to 70 °C |
| Program Memory Type | Built-in flash |
| Mounting Type | Through-hole |
Bảo phân biệt quan trọng
- Integrated flash in a through-hole S08 package (vsGeneric 8-bit MCU without the confirmed S08 pin and software compatibility)
- Defined low-voltage operating range (vsGeneric 5 V-only entry-level microcontroller)
- Defined commercial-temperature operation (vsConsumer-temperature MCU with narrower environmental limits)
Ghi chú thiết kế
Use the manufacturer 28-PDIP land pattern and verify the lead spacing, row spacing, and drill diameter against the package drawing. Keep the through-hole footprint accessible for assembly and repair, and check component clearance around the programmer connector. The footprint must not be copied from another DIP device without dimensional comparison.
Design the supply rail for the specified 1.8 V to 3.6 V operating range and review the datasheet’s absolute maximum and voltage-timing limits. Place required bypass capacitors at the power and ground pins using the layout guidance in the datasheet, and keep switching-converter or relay-transient current paths away from sensitive signal routing.
Assign every package position from the official pin-description table, including reset, clock, programming, and no-connect pins. Route programming signals so the programming connector or test pads remain accessible, and route oscillator-related copper only as directed by the manufacturer’s recommended layout. Review unused pins rather than assuming every exposed position is a general-purpose I/O.
Do not substitute a generic 8-bit MCU based only on clock speed and flash capacity. Check the S08 instruction set, memory map, interrupt behavior, peripheral assignments, startup files, programming toolchain, and package pinout. A family member with similar headline specifications can still require firmware, board, or adapter changes.
Thông tin tuân thủ
The verified product listing identifies the MC9S08RD60PE as lead-free and RoHS compliant. REACH, halogen-free, and conflict-minerals status are not established by the available product information.
