MC9S08RX32AFE - 8-Bit 32KB Flash MCU | NXP
MPN: MC9S08RX32AFE ✓ Hoạt độngMC9S08RX32AFE Tóm tắt
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals on one device. The MC9S08RX32AFE belongs to the hierarchy of microcontroller, embedded controller, S08RX microcontroller, 8-bit MCU, and embedded semiconductor. Its S08 architecture provides a familiar platform for motor control, appliance control, instrumentation, and other applications that require deterministic peripheral handling in a compact package.
The principal device characteristics include 32 KB of flash memory, 2 KB of RAM, and 8-bit processing. The flash memory provides nonvolatile program storage, while RAM supports working data and stack operations. The exact part is housed in a 64-QFN-EP package with a 9 x 9 mm footprint, allowing a relatively compact board layout despite the high pin count. The exposed pad provides a thermal and electrical connection to the PCB when the package is assembled according to the manufacturer land pattern.
The S08RX family was designed as an upgrade path for 68HC05 and 68HC08 designs that require lower power, additional peripherals, and enhanced performance. This migration path can simplify redevelopment because established 68HC08 application concepts, peripheral arrangements, and software practices can be carried into the S08RX architecture. Engineers should nevertheless validate clock configuration, interrupt behavior, memory mapping, and peripheral differences when transferring an existing design.
Typical uses include small motor controllers, appliance interfaces, industrial control modules, sensor-conditioning equipment, and compact consumer devices. The 64-QFN-EP package is especially useful where board area is constrained but a high pin count supports multiple I/O functions. Compared with larger-lead-count through-hole packages, it also supports denser assembled boards and shorter PCB routing when decoupling, programming, debug, and exposed-pad connections are laid out correctly.
The most important design consideration is package validation. Place programming and debug signals so they remain accessible, connect the exposed pad according to the manufacturer land pattern, and route sensitive inputs away from switching nodes. Decoupling capacitors should be positioned close to the appropriate power pins, while the exposed pad should have adequate thermal copper without compromising assembly clearance.
This product guide combines the exact-part package information, memory characteristics, sourcing questions, family-level application context, and design guidance. It also distinguishes a genuine drop-in replacement from a related microcontroller whose package or architecture differs, helping engineers make a safer sourcing or redesign decision without assuming that similar specifications guarantee PCB compatibility.
Bộ thay thế dễ dàng lắp đặt cho MC9S08RX32AFE — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếMC9S08RX32AFE Tỷ lệ tối đa & tính chất điện
| Product Type | 8-bit S08RX microcontroller |
| Processor Architecture | S08 enhanced 8-bit core |
| Flash Memory | 32 KB |
| Program Memory Organization | 32K x 8 bits |
| RAM | 2 KB |
| Maximum CPU Frequency | 8 MHz |
| Family Maximum Frequency | 16 MHz |
| Hộp | 64-QFN-EP (9 x 9 mm) |
| Kiểu lắp đặt | Surface mount |
| Số chân | 64 pins |
| Exposed Pad | Present |
| Moisture Sensitivity Level | MSL 3 |
| Peak Reflow Temperature | 245 C |
| Maximum Time at Peak Reflow Temperature | 30 s |
Hướng dẫn cấu hình chân MC9S08RX32AFE 64-qfn-ep (9 x 9 mm)
Cấu hình chân cho MC9S08RX32AFE (64-qfn-ep (9 x 9 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MC9S08RX32AFE.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MC9S08RX32AFE phù hợp cho 6 Áp dụngs: Small Motor Controller, Appliance Control Module, Industrial Sensor Interface, Legacy 68HC08 Product Upgrade, Compact Instrumentation Controller, Consumer Peripheral Controller.
Small Motor Controller
The MC9S08RX32AFE fits compact motor-control modules where an 8-bit control engine is sufficient for command processing, state management, and peripheral coordination. Its 32 KB flash provides space for the control firmware, while 2 KB of RAM supports working variables and short task buffers. The listed 8 MHz operating frequency is suitable for many motor-control functions that do not require the throughput of a 32-bit MCU. Use the S08RX timer and PWM capabilities for deterministic actuation, but provide external gate drivers, current sensing, overcurrent protection, and thermal protection. The 64-QFN-EP 9 x 9 mm package also requires careful exposed-pad routing for reliable assembly.
Được đề xuất
Appliance Control Module
The MC9S08RX32AFE is appropriate for appliance controllers that combine local user-interface handling, discrete input monitoring, and actuator control. The 32 KB flash stores application firmware and lookup data, while 2 KB of RAM can hold current state and communication buffers. Its S08RX architecture is especially relevant when a legacy 68HC08-based appliance design is being refreshed because the family supports migration toward lower-power operation and additional peripherals. The 64-QFN-EP package helps reduce board area, but high-current relays, triacs, and mains-connected interfaces must remain separated from the low-level MCU section with suitable isolation and protection.
Được đề xuất
Industrial Sensor Interface
The MC9S08RX32AFE can serve as the local controller for industrial sensor modules requiring digital I/O, conditioning, and a compact embedded program. Its 32 KB flash accommodates protocol drivers and configuration logic, while 2 KB of RAM is useful for sampled data and short communication frames. The listed 8 MHz performance can support common sensor polling, switch debouncing, status reporting, and supervisory functions. For industrial deployment, validate the exact peripheral set, operating-temperature limits, and supply range against the required environment. Place the MCU away from relay contacts, motor drivers, and high-voltage switching stages, and use a quiet ground strategy to prevent switching events from corrupting sensor measurements.
Được đề xuất
Legacy 68HC08 Product Upgrade
The MC9S08RX32AFE is especially relevant to upgrades from 68HC05 and 68HC08 platforms because the S08RX family was created as an upgrade path with lower-power operation, expanded peripherals, and enhanced S08-core performance. The 32 KB flash and 2 KB RAM support embedded control firmware and working memory for migration projects. Designers can reuse established control concepts while reviewing interrupt priorities, timer registers, port behavior, memory organization, and electrical limits. Because this is not necessarily a register-for-register or pin-for-pin migration, retain a hardware and firmware verification plan. The 64-QFN-EP footprint should be checked against the target board before the migration is approved.
Được đề xuất
Compact Instrumentation Controller
The MC9S08RX32AFE can act as a compact front-end controller in measurement and instrumentation products where local controls, status LEDs, calibration data, and a serial interface must coexist on a small board. Its 32 KB flash provides nonvolatile firmware storage, and 2 KB of RAM is sufficient for many measurement-state and communication-buffer tasks. The 8-bit architecture can simplify deterministic supervisory logic when high-rate conversion is handled by dedicated signal-chain components. Keep analog input routing separate from digital return currents, use a stable reference and bypass arrangement, and provide adequate copper beneath the exposed pad. Confirm communications and display-interface requirements against the exact S08RX device functions.
Được đề xuất
Consumer Peripheral Controller
The MC9S08RX32AFE is suitable for compact consumer peripherals that require local button handling, LED control, status indication, and a simple host interface. The 32 KB flash accommodates firmware and configuration tables, while 2 KB of RAM is adequate for nongraphical control tasks and short protocol buffers. The 64-QFN-EP 9 x 9 mm package supports dense portable assemblies where a lower-pin-count package would be difficult to route. A USB connector, radio module, or display should not be assumed to be integrated; verify the available communications and timing peripherals in the device documentation. Apply careful partitioning between sensitive analog or radio areas and the digital MCU section.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MC9S08RX32AFE — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | NXP Semiconductors |
| Package | 64-QFN-EP (9 x 9 mm) |
| Product Type | 8-bit S08RX microcontroller |
| Flash Memory | 32 KB |
| RAM | 2 KB |
| Maximum CPU Frequency | 8 MHz |
| Program Memory Organization | 32K x 8 bits |
| Moisture Sensitivity Level | MSL 3 |
| Peak Reflow Temperature | 245 C |
| Mounting Type | Surface mount |
Bảo phân biệt quan trọng
- Higher pin count and larger package than the related QE32 device (vsMC9S08QE32CFM)
- Dedicated migration path from established 68HC08-class applications (vsMC9S08QE32CFM)
- Compact embedded footprint with integrated program storage (vsMC9S08QE32CFM)
Ghi chú thiết kế
Use the manufacturer land pattern for the 64-QFN-EP 9 x 9 mm package and preserve the exposed-pad geometry. Place required supply capacitors immediately adjacent to their power pins, and provide short, low-impedance connections between capacitor grounds and the device ground network. Keep programming, reset, clock, and debug routes accessible while avoiding crossings beneath noisy switching stages. A footprint match based only on body dimensions is insufficient because pad dimensions, exposed-pad size, and pin numbering must also agree.
Partition analog, sensor, clock, and communications routing around the MCU rather than treating the 64-QFN-EP package as an unrestricted signal hub. Return switched-current loops to their local power-stage ground reference instead of routing return current through the MCU ground area. For communications and clock signals, use the shortest practical path and provide the termination or filtering specified by the attached circuit. Validate timing margin with the intended clock source and operating mode because the exact-part listing states 8 MHz while family material identifies a maximum of 16 MHz.
Do not treat the MC9S08QE32CFM as a drop-in substitute: its 32-QFN-EP 5 x 5 mm package differs from the MC9S08RX32AFE's 64-QFN-EP 9 x 9 mm package. Also avoid assuming that 32 KB of flash implies identical firmware constraints across S08 devices. Before releasing a migration, compare clock configuration, interrupt vectors, memory-map details, peripheral registers, pin multiplexing, supply requirements, and programming procedures. Use the NXP manufacturer datasheet and reference manual as the controlling technical documents for the exact device.
Thông tin tuân thủ
The exact PartStack listing reports MSL 3, a 245 C peak reflow temperature, and a maximum time of 30 seconds at peak reflow. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation for the exact ordering code.