MCP3462RT-E/NC - 16-Bit 153.6 kSPS Delta-Sigma ADC | Microchip Technology
MPN: MCP3462RT-E/NC ✓ Hoạt độngMCP3462RT-E/NC Tóm tắt
A delta-sigma ADC is a data-converter architecture that uses continuous-time sampling and digital noise shaping to achieve high resolution from low-cost, compact integrated circuits. The MCP3462RT-E/NC belongs to the broader data-converter IC hierarchy, combining a sigma-delta modulator, digital filter, reference, oscillator, and digital interface in one device. This integration reduces external component count and simplifies PCB design compared with a discrete precision-conversion chain.
The converter provides 16-bit resolution, a programmable output data rate up to 153.6 kSPS, and operation from a 2.7 V to 3.6 V supply according to the manufacturer product information. Its integrated voltage reference, internal oscillator, temperature sensor, and burnout-sensor detection support self-contained measurement systems. The SPI interface provides a straightforward digital connection to microcontrollers, embedded controllers, and data-acquisition equipment.
The internal reference and oscillator are useful when a compact, deterministic sensor board is required. The temperature sensor can support compensation or diagnostics, while burnout detection helps identify open or failed sensor loops. The delta-sigma architecture is especially effective for slow-to-medium-speed measurements where high resolution and low noise are more important than high-bandwidth conversion.
Typical uses include pressure, temperature, current, and industrial process sensing, as well as portable instrumentation, test and measurement equipment, and embedded data acquisition. The 3.7 V maximum supply voltage requires careful rail design, and analog input common-mode and source impedance should be evaluated against the converter's input structure before precision measurements are attempted.
This page combines manufacturer and distributor product information with package details, practical application guidance, and drop-in alternatives for engineers evaluating the MCP3462RT-E/NC.
Bộ thay thế dễ dàng lắp đặt cho MCP3462RT-E/NC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MCP3462RT-E/NC (cùng hình factor và footprint) — khác nhau ở Converter Architecture, Internal Oscillator, Internal Voltage Reference, Package.
MCP3461RT-E/NC
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MCP3464RT-E/NC
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MCP3463RT-E/NC
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MCP3462RT-E/NC Tỷ lệ tối đa & tính chất điện
| Độ phân giải | 16 bit |
| Converter Architecture | Delta-sigma ADC |
| Maximum Data Rate | 153.6 kSPS |
| Input Channels | 2 differential or 4 single-ended |
| Supply Voltage Range | 2.7 V to 3.6 V |
| Digital Interface | SPI |
| Internal Voltage Reference | Integrated |
| Internal Oscillator | Integrated |
| Temperature Sensor | Integrated |
| Burnout Sensor Detection | Supported |
| Hộp | 20-pin UQFN, 3 mm x 3 mm |
| Kiểu lắp đặt | Surface mount |
| Low-Noise Conversion | Low-noise delta-sigma operation |
| Component Type | Analog-to-digital converter (ADC) |
| Trạng thái RoHS | Compliant |
Hướng dẫn cấu hình chân MCP3462RT-E/NC 20-pin uqfn, 3 mm x 3 mm
Cấu hình chân cho MCP3462RT-E/NC (20-pin uqfn, 3 mm x 3 mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho MCP3462RT-E/NC.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MCP3462RT-E/NC phù hợp cho 6 Áp dụngs: Industrial Pressure Sensing, Temperature and Environmental Monitoring, Battery-Powered Sensor Nodes, Portable Test and Measurement, Current-Shunt Measurement, Embedded Data Acquisition.
Industrial Pressure Sensing
The MCP3462RT-E/NC fits bridge or resistive pressure-sensor front ends that require a 16-bit conversion result and a compact 3 mm x 3 mm footprint. Its two differential or four single-ended inputs support complementary sensor outputs, while the integrated reference and burnout detection can simplify system checks. The maximum 153.6 kSPS data rate is more than adequate for many pressure-monitoring loops, and the SPI interface connects directly to an embedded controller. Designers should verify the sensor excitation requirements, input common-mode limits, and analog filtering before finalizing the front end.
Được đề xuất
Temperature and Environmental Monitoring
The MCP3462RT-E/NC is suitable for multi-channel environmental monitoring using resistive, semiconductor, or thermistor sensors. Four single-ended inputs allow several sensors to be measured sequentially, while two differential inputs support ratiometric or complementary sensor arrangements. The integrated temperature sensor supports board-level diagnostics or thermal compensation, and the internal oscillator removes the need for an external clock in a self-contained measurement node. A suitable low-pass filter and reference-bypass network remain important for stable 16-bit results.
Được đề xuất
Battery-Powered Sensor Nodes
The MCP3462RT-E/NC can serve as the acquisition engine in a compact, low-voltage sensor node operating from a 2.7 V to 3.6 V rail. Integrating the voltage reference, oscillator, temperature sensor, and burnout detection reduces the number of external support components, while the 20-pin UQFN limits board area. Because the ADC itself consumes additional current during conversion, the complete power budget must include the converter, digital interface, and sensor excitation. Use the manufacturer oscillator and low-power settings when designing duty-cycled acquisition schedules.
Được đề xuất
Portable Test and Measurement
The MCP3462RT-E/NC is appropriate for portable instrumentation that needs high resolution without a large converter footprint. Its 16-bit delta-sigma architecture and programmable rate up to 153.6 kSPS are useful for measuring slow and medium-speed signals such as voltage dividers, current-shunt outputs, and transducer signals. The internal reference helps simplify portable equipment, while SPI allows connection to a display controller or MCU. For laboratory accuracy, characterize offset, gain, reference behavior, and input noise across the intended temperature range.
Được đề xuất
Current-Shunt Measurement
The MCP3462RT-E/NC can measure small voltage drops across a current shunt in power-conversion and battery-monitoring systems. Differential inputs help reject common-mode voltage present on the shunt nodes, while the 16-bit resolution supports fine current measurements from modest shunt voltages. The SPI interface allows periodic current readings alongside other telemetry. Input protection, filtering, and the common-mode range must be checked because a wide common-mode operating range can exceed the converter's analog input limits even when the differential signal is small.
Được đề xuất
Embedded Data Acquisition
The MCP3462RT-E/NC fits compact embedded data-acquisition modules that must collect several analog channels without using a large parallel-interface ADC. Four single-ended inputs expand channel count, two differential inputs support noise-sensitive front ends, and the SPI bus connects to an MCU with relatively few signal lines. At 153.6 kSPS, one converter can serve multiple multiplexed sensors when their bandwidth requirements are modest. The system should define acquisition timing, digital-filter settling, and trigger behavior according to the manufacturer configuration procedure.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MCP3462RT-E/NC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MCP3461RT-E/NC | MCP3464RT-E/NC | MCP3463RT-E/NC |
|---|---|---|---|---|
| Package | 20-pin UQFN, 3 mm x 3 mm | 20-pin UQFN, 3 mm x 3 mm | 20-pin UQFN, 3 mm x 3 mm | 20-pin UQFN, 3 mm x 3 mm |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
Bảo phân biệt quan trọng
- Balanced channel count for compact multi-sensor designs (vsMCP3461RT-E/NC)
- Lower channel count than the higher-density family option (vsMCP3464RT-E/NC)
- Integrated resources reduce external support circuitry (vsMCP3463RT-E/NC)
Ghi chú thiết kế
Keep the MCP3462RT-E/NC within its 2.7 V to 3.6 V supply range and place the manufacturer-recommended bypass capacitors close to the supply and ground pins. Because the converter includes an internal reference and oscillator, power-supply noise can still affect measurement resolution through supply coupling. Use a quiet 3 V rail for precision measurements and route return current away from sensitive analog input paths.
Place the analog input traces close to the device and keep them away from SPI switching lines, oscillator-sensitive routes, and high-current power paths. Differential inputs should be routed symmetrically where possible to minimize conversion of common-mode noise into differential error. Follow the datasheet grounding and exposed-pad recommendations; the exposed pad is a thermal and electrical-land-pattern feature and must not be treated as an optional connection.
Use an analog anti-alias filter appropriate to the selected output data rate and sensor bandwidth. A delta-sigma ADC includes digital filtering, but the input still needs protection from out-of-band noise and fast transients. For multiplexed channels, allow the converter's digital filter and settling time before treating a new conversion as valid. Confirm the configuration sequence and timing in the manufacturer datasheet.
Do not treat the MCP3462RT-E/ST as a PCB drop-in substitute for the MCP3462RT-E/NC because one is TSSOP and the other is UQFN. Similarly, changing between MCP3461, MCP3462, MCP3463, and MCP3464 configurations can alter channel count, pin function, and acquisition timing. Verify the complete pin table, supply limits, and digital configuration register sequence before approving any substitution.
Thông tin tuân thủ
The LCSC product listing identifies the MCP3462RT-E/NC as RoHS compliant. No additional compliance claims are stated.