MCP3462RT-E/NC - 16-Bit 153.6 kSPS Delta-Sigma ADC | Microchip Technology
MPN: MCP3462RT-E/NC ✓ 啟用中MCP3462RT-E/NC 概覽
A delta-sigma ADC is a data-converter architecture that uses continuous-time sampling and digital noise shaping to achieve high resolution from low-cost, compact integrated circuits. The MCP3462RT-E/NC belongs to the broader data-converter IC hierarchy, combining a sigma-delta modulator, digital filter, reference, oscillator, and digital interface in one device. This integration reduces external component count and simplifies PCB design compared with a discrete precision-conversion chain.
The converter provides 16-bit resolution, a programmable output data rate up to 153.6 kSPS, and operation from a 2.7 V to 3.6 V supply according to the manufacturer product information. Its integrated voltage reference, internal oscillator, temperature sensor, and burnout-sensor detection support self-contained measurement systems. The SPI interface provides a straightforward digital connection to microcontrollers, embedded controllers, and data-acquisition equipment.
The internal reference and oscillator are useful when a compact, deterministic sensor board is required. The temperature sensor can support compensation or diagnostics, while burnout detection helps identify open or failed sensor loops. The delta-sigma architecture is especially effective for slow-to-medium-speed measurements where high resolution and low noise are more important than high-bandwidth conversion.
Typical uses include pressure, temperature, current, and industrial process sensing, as well as portable instrumentation, test and measurement equipment, and embedded data acquisition. The 3.7 V maximum supply voltage requires careful rail design, and analog input common-mode and source impedance should be evaluated against the converter's input structure before precision measurements are attempted.
This page combines manufacturer and distributor product information with package details, practical application guidance, and drop-in alternatives for engineers evaluating the MCP3462RT-E/NC.
直接替換替代品,適用於 MCP3462RT-E/NC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MCP3462RT-E/NC (相同外形與佔位) — 差異在於 Converter Architecture, Internal Oscillator, Internal Voltage Reference, Package.
MCP3461RT-E/NC
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MCP3464RT-E/NC
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MCP3463RT-E/NC
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
MCP3462RT-E/NC 最大額定值與電氣特性
| 解析度 | 16 bit |
| Converter Architecture | Delta-sigma ADC |
| Maximum Data Rate | 153.6 kSPS |
| Input Channels | 2 differential or 4 single-ended |
| Supply Voltage Range | 2.7 V to 3.6 V |
| Digital Interface | SPI |
| Internal Voltage Reference | Integrated |
| Internal Oscillator | Integrated |
| Temperature Sensor | Integrated |
| Burnout Sensor Detection | Supported |
| 封裝 | 20-pin UQFN, 3 mm x 3 mm |
| 安裝類型 | Surface mount |
| Low-Noise Conversion | Low-noise delta-sigma operation |
| Component Type | Analog-to-digital converter (ADC) |
| RoHS 狀態 | Compliant |
MCP3462RT-E/NC 20-pin uqfn, 3 mm x 3 mm 腳位配置指南
MCP3462RT-E/NC(20-pin uqfn, 3 mm x 3 mm 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: MCP3462RT-E/NC.
請參閱 資料表 以查看完整腳位配置。
典型應用
MCP3462RT-E/NC 適用於 6 應用s: Industrial Pressure Sensing, Temperature and Environmental Monitoring, Battery-Powered Sensor Nodes, Portable Test and Measurement, Current-Shunt Measurement, Embedded Data Acquisition.
Industrial Pressure Sensing
The MCP3462RT-E/NC fits bridge or resistive pressure-sensor front ends that require a 16-bit conversion result and a compact 3 mm x 3 mm footprint. Its two differential or four single-ended inputs support complementary sensor outputs, while the integrated reference and burnout detection can simplify system checks. The maximum 153.6 kSPS data rate is more than adequate for many pressure-monitoring loops, and the SPI interface connects directly to an embedded controller. Designers should verify the sensor excitation requirements, input common-mode limits, and analog filtering before finalizing the front end.
推薦
Temperature and Environmental Monitoring
The MCP3462RT-E/NC is suitable for multi-channel environmental monitoring using resistive, semiconductor, or thermistor sensors. Four single-ended inputs allow several sensors to be measured sequentially, while two differential inputs support ratiometric or complementary sensor arrangements. The integrated temperature sensor supports board-level diagnostics or thermal compensation, and the internal oscillator removes the need for an external clock in a self-contained measurement node. A suitable low-pass filter and reference-bypass network remain important for stable 16-bit results.
推薦
Battery-Powered Sensor Nodes
The MCP3462RT-E/NC can serve as the acquisition engine in a compact, low-voltage sensor node operating from a 2.7 V to 3.6 V rail. Integrating the voltage reference, oscillator, temperature sensor, and burnout detection reduces the number of external support components, while the 20-pin UQFN limits board area. Because the ADC itself consumes additional current during conversion, the complete power budget must include the converter, digital interface, and sensor excitation. Use the manufacturer oscillator and low-power settings when designing duty-cycled acquisition schedules.
推薦
Portable Test and Measurement
The MCP3462RT-E/NC is appropriate for portable instrumentation that needs high resolution without a large converter footprint. Its 16-bit delta-sigma architecture and programmable rate up to 153.6 kSPS are useful for measuring slow and medium-speed signals such as voltage dividers, current-shunt outputs, and transducer signals. The internal reference helps simplify portable equipment, while SPI allows connection to a display controller or MCU. For laboratory accuracy, characterize offset, gain, reference behavior, and input noise across the intended temperature range.
推薦
Current-Shunt Measurement
The MCP3462RT-E/NC can measure small voltage drops across a current shunt in power-conversion and battery-monitoring systems. Differential inputs help reject common-mode voltage present on the shunt nodes, while the 16-bit resolution supports fine current measurements from modest shunt voltages. The SPI interface allows periodic current readings alongside other telemetry. Input protection, filtering, and the common-mode range must be checked because a wide common-mode operating range can exceed the converter's analog input limits even when the differential signal is small.
推薦
Embedded Data Acquisition
The MCP3462RT-E/NC fits compact embedded data-acquisition modules that must collect several analog channels without using a large parallel-interface ADC. Four single-ended inputs expand channel count, two differential inputs support noise-sensitive front ends, and the SPI bus connects to an MCU with relatively few signal lines. At 153.6 kSPS, one converter can serve multiple multiplexed sensors when their bandwidth requirements are modest. The system should define acquisition timing, digital-filter settling, and trigger behavior according to the manufacturer configuration procedure.
推薦
推薦產品摘要
工程參考資料,適用於 MCP3462RT-E/NC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MCP3461RT-E/NC | MCP3464RT-E/NC | MCP3463RT-E/NC |
|---|---|---|---|---|
| Package | 20-pin UQFN, 3 mm x 3 mm | 20-pin UQFN, 3 mm x 3 mm | 20-pin UQFN, 3 mm x 3 mm | 20-pin UQFN, 3 mm x 3 mm |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
主要差異化特點
- Balanced channel count for compact multi-sensor designs (對比MCP3461RT-E/NC)
- Lower channel count than the higher-density family option (對比MCP3464RT-E/NC)
- Integrated resources reduce external support circuitry (對比MCP3463RT-E/NC)
設計說明
Keep the MCP3462RT-E/NC within its 2.7 V to 3.6 V supply range and place the manufacturer-recommended bypass capacitors close to the supply and ground pins. Because the converter includes an internal reference and oscillator, power-supply noise can still affect measurement resolution through supply coupling. Use a quiet 3 V rail for precision measurements and route return current away from sensitive analog input paths.
Place the analog input traces close to the device and keep them away from SPI switching lines, oscillator-sensitive routes, and high-current power paths. Differential inputs should be routed symmetrically where possible to minimize conversion of common-mode noise into differential error. Follow the datasheet grounding and exposed-pad recommendations; the exposed pad is a thermal and electrical-land-pattern feature and must not be treated as an optional connection.
Use an analog anti-alias filter appropriate to the selected output data rate and sensor bandwidth. A delta-sigma ADC includes digital filtering, but the input still needs protection from out-of-band noise and fast transients. For multiplexed channels, allow the converter's digital filter and settling time before treating a new conversion as valid. Confirm the configuration sequence and timing in the manufacturer datasheet.
Do not treat the MCP3462RT-E/ST as a PCB drop-in substitute for the MCP3462RT-E/NC because one is TSSOP and the other is UQFN. Similarly, changing between MCP3461, MCP3462, MCP3463, and MCP3464 configurations can alter channel count, pin function, and acquisition timing. Verify the complete pin table, supply limits, and digital configuration register sequence before approving any substitution.
合規資訊
The LCSC product listing identifies the MCP3462RT-E/NC as RoHS compliant. No additional compliance claims are stated.