Microchip Technology

MCP3901A0-E/SS - Dual 24-Bit 64 kSPS ADC AFE | Microchip

MPN: MCP3901A0-E/SS ✓ Hoạt động
1 internal reference Vdss 20-pin SSOP, 0.209 mm pitch, 5.30 mm width Package 20 MHz Speed
MOQ: 1 |

MCP3901A0-E/SS Tóm tắt

Microchip Technology MCP3901A0-E/SS is a dual-channel analog front end with two synchronous-sampling delta-sigma analog-to-digital converters, selectable 16-bit or 24-bit resolution, a maximum conversion rate of 64 kSPS per channel, and a 20-pin SSOP package. The device includes two programmable-gain amplifiers, an internal voltage reference, phase-delay compensation, and a 20 MHz SPI-compatible serial interface.

An analog front end is the precision-measurement stage between real-world analog inputs and a digital controller. It combines conversion, gain control, reference support, and serial communication in one integrated circuit. The MCP3901 belongs to the broader delta-sigma ADC family and is designed for metering and sensor systems where simultaneous dual-channel sampling, high resolution, and serial integration are more important than very high conversion latency.

The MCP3901A0-E/SS provides up to 91 dB SINAD and -104 dBc total harmonic distortion. Selectable 16-bit and 24-bit operating modes allow firmware to balance conversion speed, resolution, filtering requirements, and data throughput. Its two programmable-gain amplifiers reduce the need for external signal-conditioning networks, while the internal reference supports a compact and repeatable measurement design.

Internally, the MCP3901 uses proprietary delta-sigma converters with a dithering algorithm designed to reduce idle tones and improve total harmonic distortion. The SPI-compatible interface operates at up to 20 MHz, and phase-delay compensation supports measurements where channel timing must be coordinated. The device also supports proprietary dithering for improved signal purity when operating near idle conditions.

Typical uses include single-phase energy metering, industrial sensor acquisition, pressure and flow measurement, low-level analog sensing, and instrumentation requiring two synchronized channels. The combination of a 20 MHz serial interface, simultaneous conversion, programmable gain, and selectable resolution makes the device practical for compact measurement systems with limited board area.

Designers should follow the manufacturer datasheet for bypass capacitors, input filtering, reference handling, digital-interface timing, and the recommended PCB land pattern. Because the MCP3901A0-E/SS is supplied in a 20-pin SSOP package, component placement and routing should prioritize short analog traces, a clean analog ground connection, and isolation of high-current digital return paths.

This product page combines the manufacturer specifications with package information, application guidance, parameter comparisons, and practical design considerations. It is intended to help engineers evaluate the MCP3901A0-E/SS for high-resolution metering and sensor-conversion designs while checking the exact ordering code, pin arrangement, and operating conditions before release to production.

Bộ thay thế dễ dàng lắp đặt cho MCP3901A0-E/SS — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MCP3901A0-E/SS (cùng hình factor và footprint) — khác nhau ở Package, Phase-Delay Compensation, Mounting Type, Programmable Gain Amplifiers, ADC Architecture.

Microchip Technology
Package: 20-QFN (4 x 4 mm) with exposed pad
Phase-Delay Compensation: Programmable phase-delay compensation
Mounting Type: Surface-mount SMD
Microchip Technology
Package: 20-pin SSOP
Phase-Delay Compensation: Yes
Programmable Gain Amplifiers: 2 internal PGAs

MCP3901A0-I/SS

✅ Drop-In
Microchip Technology
📦 20-SSOP
Dual-channel analog front end · 2 channels · Synchronous sampling delta-sigma ADC · 16-bit or 24-bit · 64 kSPS · 2 internal PGAs · Up to 91 dB · -104 dBc up to the 35th harmonic

Liên hệ để biết giá

Xem tài liệu →

MCP3901A1-I/SS

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 20-SSOP
A1 PGA configuration and industrial grade instead of A0 configuration and extended commercial grade; core resolution and interface class remain the same

📋 Tham chiếu thay thế (không có trong danh mục)

MCP3901A1-E/SS

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 20-SSOP
A1 PGA configuration differs from A0 while the extended commercial grade, 20-SSOP footprint, and core converter class remain compatible

📋 Tham chiếu thay thế (không có trong danh mục)

MCP3901A0T-E/SS

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 20-SSOP
A0T gain configuration differs from standard A0 while retaining the extended grade, 20-SSOP footprint, and MCP3901 dual-channel platform

📋 Tham chiếu thay thế (không có trong danh mục)

MCP3901A0-E/SS Tỷ lệ tối đa & tính chất điện

ADC Architecture Delta-sigma
Number of Channels 2 channels
Độ phân giải 16-bit or 24-bit selectable
Maximum Conversion Rate 64 kSPS
Sampling Type Synchronous dual-channel sampling
Signal-to-Noise and Distortion Up to 91 dB SINAD
Total Harmonic Distortion -104 dBc
Programmable Gain Amplifiers 2 integrated PGAs
Internal Voltage Reference 1 internal reference
Digital Interface SPI compatible
Maximum SPI Clock Frequency 20 MHz
Digital Supply Voltage 2.7 V to 5.5 V
Analog Supply Voltage 4.5 V to 5.5 V
Hộp 20-pin SSOP, 0.209 mm pitch, 5.30 mm width
Kiểu lắp đặt Surface mount
Dithering Proprietary dithering algorithm
Phase-Delay Compensation Internal phase-delay compensation block

Hướng dẫn cấu hình chân MCP3901A0-E/SS 20-pin ssop, 0.209 mm pitch, 5.30 mm width

Cấu hình chân cho MCP3901A0-E/SS (20-pin ssop, 0.209 mm pitch, 5.30 mm width gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 20-pin ssop, 0.209 mm pitch, 5.30 mm width cho MCP3901A0-E/SS

Không có dữ liệu chân cụ thể sẵn có cho MCP3901A0-E/SS.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MCP3901A0-E/SS phù hợp cho 6 Áp dụngs: Single-Phase Energy Metering, Industrial Sensor Acquisition, Pressure and Flow Measurement, Precision Instrumentation, Environmental Monitoring, Battery-Powered Sensor Node.

⚡

Single-Phase Energy Metering

The MCP3901A0-E/SS is well suited to single-phase energy meters requiring simultaneous current and voltage acquisition. Its two synchronous delta-sigma channels support selectable 16-bit or 24-bit resolution at up to 64 kSPS, while the two integrated programmable-gain amplifiers help condition low-level sensor outputs. The 91 dB maximum SINAD and -104 dBc THD are meaningful for preserving waveform detail during rms power and energy calculations. The 20 MHz SPI-compatible interface allows the converter to transfer samples efficiently to a metering controller. Designers should configure the PGA ranges and filter parameters to match the current and voltage sensors rather than assuming the analog inputs are interchangeable.

🏭

Industrial Sensor Acquisition

MCP3901A0-E/SS can acquire two low-level industrial sensor outputs through its integrated analog front end. The selectable 24-bit mode supports high-resolution measurements, while operation at 64 kSPS gives the controller enough temporal data for process monitoring and control. Two PGA channels reduce the amount of external amplification required when sensors have different output ranges. Up to 91 dB SINAD is useful when the measurement includes a small signal riding on a larger common-mode level. The SPI-compatible serial interface supports compact embedded hardware, and the internal voltage reference helps establish a repeatable conversion baseline. Input protection, filtering, and isolation should be designed around the sensor and industrial environment.

🔧

Pressure and Flow Measurement

The dual-channel architecture of MCP3901A0-E/SS fits pressure and flow instruments that need synchronized measurement from two sensing elements. Simultaneous sampling reduces the timing offset between channels, which is important when comparing a primary sensor with a compensation or reference signal. The converter can operate in 24-bit mode for high-resolution results or 16-bit mode when the system prioritizes throughput and filtering. Integrated PGAs help match the ADC to low-level bridge or transducer outputs, and the internal reference supports consistent calibration. The 20 MHz SPI-compatible interface permits rapid sample transfer without requiring a parallel data bus, making the AFE suitable for compact instrumentation with limited board space.

📟

Precision Instrumentation

MCP3901A0-E/SS is useful in laboratory and process instrumentation where two analog channels must be digitized with high resolution. Its 24-bit operating mode captures fine signal detail, while the maximum 91 dB SINAD supports measurements with demanding noise and distortion limits. The two programmable-gain amplifiers allow each channel to use an appropriate sensitivity range, and the internal reference reduces the external component count. The delta-sigma architecture is particularly appropriate for slowly changing or continuously sampled analog quantities that do not require a high-latency, high-rate SAR converter. Firmware should implement the digital filter and settle time appropriate to the selected resolution and output-data rate before using measurements for calibration.

🧩

Environmental Monitoring

The MCP3901A0-E/SS can digitize paired outputs from environmental sensors such as gas, humidity, or multi-axis sensing assemblies. Two synchronous channels are valuable when a system measures a sensor signal alongside a reference, temperature-compensation channel, or second sensing axis. The selectable 16-bit and 24-bit modes let the embedded controller optimize between measurement detail and communication bandwidth, while the integrated PGAs support low-level sensor outputs. The internal reference and dithering algorithm help support stable conversion results, including reduced idle tones in suitable operating conditions. Low-power sensor systems should also account for the AFE's continuous analog and digital supply requirements and disable or control external circuitry when measurements are not required.

🔋

Battery-Powered Sensor Node

MCP3901A0-E/SS is suitable for compact battery-powered sensor nodes that periodically measure two analog channels and then transmit the results through a serial microcontroller interface. The selectable 16-bit mode can reduce conversion and processing demand when full 24-bit resolution is unnecessary, while the 20 MHz SPI-compatible link supports rapid transfer when higher-resolution data is required. The internal reference and integrated PGAs simplify the analog signal path, potentially reducing board area and component count. Because the part is an analog front end rather than a low-power energy-harvesting device, overall energy consumption depends on the chosen mode, sampling frequency, controller behavior, and external sensor load. Duty-cycling should preserve the required startup and settling behavior.

Tóm tắt các sản phẩm được đề xuất

MCP3901A0-I/SS Microchip Technology Được sử dụng trong: Single-Phase Energy Metering, Industrial Sensor Acquisition, Pressure and Flow Measurement, Environmental Monitoring, Battery-Powered Sensor Node MCP3901A1-I/SS Alternate same-family PGA configuration Được sử dụng trong: Single-Phase Energy Metering, Precision Instrumentation MCP3901A1-E/SS Alternate same-package PGA configuration Được sử dụng trong: Industrial Sensor Acquisition, Precision Instrumentation MCP3901A0T-E/SS Same-family alternate gain configuration Được sử dụng trong: Pressure and Flow Measurement, Environmental Monitoring MSP430F133IPMR Texas Instruments Được sử dụng trong: Battery-Powered Sensor Node
What is the MCP3901A0-E/SS?
The MCP3901A0-E/SS is a dual-channel analog front end with two synchronous-sampling, selectable 16-bit or 24-bit delta-sigma ADCs, two programmable-gain amplifiers, an internal voltage reference, and an SPI-compatible interface. According to the Microchip Two-Channel Analog Front End datasheet, it converts at up to 64 kSPS and reaches up to 91 dB SINAD in a 20-pin SSOP package.
What are the key specifications of MCP3901A0-E/SS that engineers should know?
The MCP3901A0-E/SS combines two simultaneous delta-sigma sampling channels, selectable 16-bit or 24-bit resolution, a maximum rate of 64 kSPS, two programmable-gain amplifiers, and an internal voltage reference. The Microchip datasheet also specifies a 20 MHz SPI-compatible interface, 91 dB maximum SINAD, -104 dBc THD, a 2.7 V to 5.5 V digital supply, and a 4.5 V to 5.5 V analog supply.
Where can I download the MCP3901A0-E/SS datasheet PDF?
The MCP3901A0-E/SS datasheet PDF can be downloaded from the Microchip product page or the manufacturer-hosted Two-Channel Analog Front End document. The document identifies the converter architecture, electrical limits, digital interface, pin assignments, typical application circuit, and ordering information. Engineers should also verify the 20-pin SSOP footprint against their PCB library before layout release.
Where can I find the MCP3901A0-E/SS pinout?
The MCP3901A0-E/SS pinout is published in the pin-description and package drawings of the Microchip Two-Channel Analog Front End datasheet. The device uses a 20-pin SSOP with an exposed analog-ground and supply arrangement that must follow the manufacturer recommendations. Use the datasheet pin table as the authoritative assignment for analog inputs, supply pins, SPI signals, and digital control functions.
What is the difference between MCP3901A0-E/SS and MCP3901A0-I/SS?
MCP3901A0-E/SS and MCP3901A0-I/SS belong to the same MCP3901A0 family and use the same 20-pin SSOP package, making the I/SS ordering code the closest same-brand drop-in candidate. The principal ordering-code difference is the temperature grade: E denotes the extended commercial grade and I denotes the industrial grade. Check the complete ordering table before substituting the parts.
Can MCP3901A1-I/SS replace MCP3901A0-E/SS?
MCP3901A1-I/SS can be considered for a drop-in design review because it is a 20-pin SSOP member of the MCP3901 family with the same fundamental converter architecture and interface. The A1 configuration differs from the A0 configuration in its gain or PGA option, so firmware, calibration, full-scale range, and signal-chain settings must be reviewed. Existing boards may require configuration changes even though the footprint is retained.
Is MCP3901A0-E/SS suitable for energy metering?
Yes, MCP3901A0-E/SS is suitable for two-channel energy-meter front ends because it provides simultaneous delta-sigma sampling, selectable 16-bit or 24-bit resolution, integrated programmable gain, and an internal reference. Its maximum SINAD of 91 dB and THD of -104 dBc support precision measurement, while the 64 kSPS conversion capability accommodates metering waveforms and synchronized current-and-voltage channels.
What applications use the MCP3901A0-E/SS?
The MCP3901A0-E/SS is used for energy metering, industrial sensor acquisition, low-level analog measurement, pressure monitoring, flow measurement, and instrumentation with two input channels. Its integrated PGA, reference, and phase-delay compensation reduce the analog front-end complexity, while selectable resolution and a 20 MHz SPI-compatible interface support compact embedded measurement systems.
How much supply voltage does MCP3901A0-E/SS require?
The MCP3901A0-E/SS requires a 2.7 V to 5.5 V digital supply and a 4.5 V to 5.5 V analog supply. These ranges come from the Microchip specifications listing. The common 5 V operating point can simplify system power distribution, but the analog and digital rails still require correct decoupling and grounding to preserve converter performance.
What is the resolution and conversion rate of MCP3901A0-E/SS?
The MCP3901A0-E/SS supports selectable 16-bit or 24-bit resolution and a maximum conversion rate of 64 kSPS. According to the Microchip Two-Channel Analog Front End datasheet, the same dual-channel delta-sigma architecture provides synchronous sampling. Firmware can select the operating mode that best balances measurement resolution, conversion speed, filtering, and output-data rate.
How does MCP3901A0-E/SS compare with MCP3901A0-I/SS for industrial use?
MCP3901A0-E/SS and MCP3901A0-I/SS share the MCP3901A0 conversion architecture, 20-pin SSOP package, two channels, and up-to-64 kSPS operating class. The distinction is the ordering-code temperature grade: E is the extended commercial option and I is the industrial option. For industrial equipment, the I/SS ordering code may be preferable if the full operating-temperature requirement exceeds the E grade.
When should I choose MCP3901A0-E/SS instead of MCP3901A1-E/SS?
Choose MCP3901A0-E/SS when the measurement design is calibrated around the A0 gain configuration, while MCP3901A1-E/SS is appropriate when the alternate A1 PGA configuration matches the signal range and calibration strategy. Both use the same 20-pin SSOP footprint and core converter architecture. Confirm the supported PGA table, gain setting, input range, and firmware configuration before making the decision.
What can replace MCP3901A0-E/SS?
The closest drop-in candidates are same-brand MCP3901A0-I/SS, MCP3901A1-I/SS, MCP3901A1-E/SS, and MCP3901A0T-E/SS where those ordering codes are approved for the design. They retain the 20-pin SSOP format, but temperature grade, PGA configuration, conversion characteristics, and firmware settings can differ. A footprint match alone is not sufficient for production substitution.
What is the best cross-brand equivalent for MCP3901A0-E/SS?
No cross-brand equivalent can be confirmed as a pin-to-pin drop-in replacement from the available technical information. The MCP3901A0-E/SS combines a proprietary dual delta-sigma AFE, programmable-gain amplifiers, an internal reference, phase-delay compensation, and a specific 20-pin SSOP interface. Any cross-brand proposal should be checked against pin assignment, supply voltage, PGA table, conversion timing, register map, and calibration behavior.
Is MCP3901A0-E/SS in stock and what is the lead time?
Current stock and a firm lead time should be requested through the Request a Quote form on this page. The manufacturer product page lists the MCP3901 family, but it does not provide a guaranteed quantity commitment for this exact ordering code. Supply status can vary with the 20-pin SSOP package, production schedule, and requested quantity.
Where can I buy MCP3901A0-E/SS online?
Use the Request a Quote form on this page to request MCP3901A0-E/SS availability, commercial terms, and the current lead time. Before ordering, confirm the exact MCP3901A0-E/SS ordering code, 20-pin SSOP package, tube or reel delivery format, and quantity required. The manufacturer identifies the device as a dual-channel energy-metering AFE.
What is the price of MCP3901A0-E/SS?
The current commercial price for MCP3901A0-E/SS is not stated because it changes with order quantity, supply status, and requested packaging. Submit a Request a Quote through the form on this page with your target quantity and package format. The request can establish current unit pricing, availability, and lead time for the exact ordering code.

Dữ liệu tham khảo kỹ thuật cho MCP3901A0-E/SS — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Select MCP3901A0-E/SS when the design requires a 20-pin SSOP dual-channel metering AFE with the A0 gain configuration, extended commercial temperature grade, and selectable 16-bit or 24-bit delta-sigma conversion. MCP3901A0-I/SS is the preferred drop-in candidate when the environmental specification calls for industrial temperature grade while retaining the A0 configuration. MCP3901A1-E/SS and MCP3901A1-I/SS are appropriate when the A1 gain table better matches the sensor ranges, but firmware, calibration, and full-scale calculations must be revised. MCP3901A0T-E/SS provides another same-family gain option for designs whose signal range matches it. No cross-brand drop-in candidate can be approved from the available information, so an alternative from another manufacturer should be treated as a new design until pin assignment, register behavior, timing, and calibration compatibility are independently verified.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MCP3901A0-I/SS MCP3901A1-I/SS MCP3901A1-E/SS
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 20-SSOP 20-SSOP - same 20-SSOP - same 20-SSOP - same
ADC Architecture Delta-sigma Delta-sigma Delta-sigma Delta-sigma
Number of Channels 2 channels 2 channels 2 channels 2 channels
Resolution 16-bit or 24-bit selectable 16-bit or 24-bit selectable 16-bit or 24-bit selectable 16-bit or 24-bit selectable
Maximum Conversion Rate 64 kSPS 64 kSPS 64 kSPS 64 kSPS
Digital Interface SPI compatible, up to 20 MHz SPI compatible SPI compatible SPI compatible
PGA Configuration A0 configuration with 2 integrated PGAs A0 configuration with 2 integrated PGAs A1 configuration with 2 integrated PGAs A1 configuration with 2 integrated PGAs
Ordering Grade E extended commercial grade I industrial grade I industrial grade E extended commercial grade

Bảo phân biệt quan trọng

  • Closest same-footprint ordering-code match (vsMCP3901A0-I/SS)
  • Higher-resolution metering capability (vsMCP3208)
  • Selectable operating resolution for design optimization (vsMCP3901A0-I/SS)
  • Integrated dual-channel gain and reference functions (vsMCP3901A1-E/SS)

Ghi chú thiết kế

Use the manufacturer package drawing and pin-description table to create the 20-pin SSOP footprint. Keep analog input traces short, place their filtering components close to the associated pins, and maintain a continuous analog ground path beneath the device where the recommended layout permits. Route the SPI clock, data, and control signals away from sensitive input nets to minimize capacitive coupling and digital noise.

The MCP3901A0-E/SS uses separate analog and digital supply ranges: 4.5 V to 5.5 V analog and 2.7 V to 5.5 V digital. Follow the datasheet's recommended bypass-capacitor values and placement. Decouple the analog rail close to the supply pins, keep high-current return paths away from the reference and analog input area, and account for the difference between the two rails when operating below 5 V.

Select the 16-bit or 24-bit operating mode together with the required digital-filter bandwidth and output-data rate rather than treating 64 kSPS as a standalone performance target. The delta-sigma conversion process introduces filtering and settling behavior that affects transient measurements. Verify the filter configuration, gain range, calibration coefficients, and channel timing against the sampling requirements of the application.

Do not substitute an A0, A1, or A0T ordering code without reviewing the PGA table and firmware configuration. Although the alternatives use the same 20-SSOP footprint, a changed gain option can alter gain, offset, full-scale range, and calibration behavior. Also verify the temperature grade, analog supply requirement, and exact register-compatible configuration before approving a production substitution.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The component is an industrial or metering analog front end rather than an automotive-qualified device. Compliance declarations for the exact ordering code require confirmation from Microchip or the authorized supply channel.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

MCP3901A0-E/SS datasheet MCP3901A0-E/SS pinout MCP3901A0-E/SS datasheet pdf MCP3901A0-E/SS specifications MCP3901A0-E/SS equivalent MCP3901A0-E/SS replacement MCP3901A0-E/SS price MCP3901A0-E/SS stock Microchip MCP3901A0-E/SS MCP3901A0-E/SS application circuit MCP3901A0-E/SS vs MCP3901A0-I/SS MCP3901A0-E/SS 20-SSOP footprint MCP3901A0-E/SS energy metering MCP3901A0-E/SS SPI interface MCP3901A0-E/SS lead time

Các bộ phận và thuật ngữ liên quan

Microchip Technology MCP3901A0-E/SS MCP3901A0-I/SS MCP3901A1-I/SS MCP3901A1-E/SS MCP3901A0T-E/SS analog front end AFE delta-sigma ADC analog-to-digital converter programmable-gain amplifier PGA internal voltage reference phase-delay compensation SPI 20-SSOP SSOP package family surface-mount package synchronous sampling SINAD total harmonic distortion THD energy metering industrial sensor acquisition proprietary dithering algorithm
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ