MCP3901A0-E/SS - Dual 24-Bit 64 kSPS ADC AFE | Microchip
부품 번호: MCP3901A0-E/SS ✓ 활성MCP3901A0-E/SS 개요
An analog front end is the precision-measurement stage between real-world analog inputs and a digital controller. It combines conversion, gain control, reference support, and serial communication in one integrated circuit. The MCP3901 belongs to the broader delta-sigma ADC family and is designed for metering and sensor systems where simultaneous dual-channel sampling, high resolution, and serial integration are more important than very high conversion latency.
The MCP3901A0-E/SS provides up to 91 dB SINAD and -104 dBc total harmonic distortion. Selectable 16-bit and 24-bit operating modes allow firmware to balance conversion speed, resolution, filtering requirements, and data throughput. Its two programmable-gain amplifiers reduce the need for external signal-conditioning networks, while the internal reference supports a compact and repeatable measurement design.
Internally, the MCP3901 uses proprietary delta-sigma converters with a dithering algorithm designed to reduce idle tones and improve total harmonic distortion. The SPI-compatible interface operates at up to 20 MHz, and phase-delay compensation supports measurements where channel timing must be coordinated. The device also supports proprietary dithering for improved signal purity when operating near idle conditions.
Typical uses include single-phase energy metering, industrial sensor acquisition, pressure and flow measurement, low-level analog sensing, and instrumentation requiring two synchronized channels. The combination of a 20 MHz serial interface, simultaneous conversion, programmable gain, and selectable resolution makes the device practical for compact measurement systems with limited board area.
Designers should follow the manufacturer datasheet for bypass capacitors, input filtering, reference handling, digital-interface timing, and the recommended PCB land pattern. Because the MCP3901A0-E/SS is supplied in a 20-pin SSOP package, component placement and routing should prioritize short analog traces, a clean analog ground connection, and isolation of high-current digital return paths.
This product page combines the manufacturer specifications with package information, application guidance, parameter comparisons, and practical design considerations. It is intended to help engineers evaluate the MCP3901A0-E/SS for high-resolution metering and sensor-conversion designs while checking the exact ordering code, pin arrangement, and operating conditions before release to production.
드롭인 대체품: MCP3901A0-E/SS — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MCP3901A0-E/SS (동일 폼 팩터 및 풋프린트) — 차이점: Package, Phase-Delay Compensation, Mounting Type, Programmable Gain Amplifiers, ADC Architecture.
MCP3901A0-I/SS
✅ 드롭인가격 문의
데이터시트 보기 →MCP3901A1-I/SS
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MCP3901A1-E/SS
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MCP3901A0T-E/SS
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
MCP3901A0-E/SS 최대 정격 & 전기적 특성
| ADC Architecture | Delta-sigma |
| Number of Channels | 2 channels |
| 분해능 | 16-bit or 24-bit selectable |
| Maximum Conversion Rate | 64 kSPS |
| Sampling Type | Synchronous dual-channel sampling |
| Signal-to-Noise and Distortion | Up to 91 dB SINAD |
| Total Harmonic Distortion | -104 dBc |
| Programmable Gain Amplifiers | 2 integrated PGAs |
| Internal Voltage Reference | 1 internal reference |
| Digital Interface | SPI compatible |
| Maximum SPI Clock Frequency | 20 MHz |
| Digital Supply Voltage | 2.7 V to 5.5 V |
| Analog Supply Voltage | 4.5 V to 5.5 V |
| 패키지 | 20-pin SSOP, 0.209 mm pitch, 5.30 mm width |
| 실장 유형 | Surface mount |
| Dithering | Proprietary dithering algorithm |
| Phase-Delay Compensation | Internal phase-delay compensation block |
MCP3901A0-E/SS 20-pin ssop, 0.209 mm pitch, 5.30 mm width 핀 구성 가이드
MCP3901A0-E/SS(20-pin ssop, 0.209 mm pitch, 5.30 mm width 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MCP3901A0-E/SS.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MCP3901A0-E/SS 적합 용도: 6 애플리케이션s: Single-Phase Energy Metering, Industrial Sensor Acquisition, Pressure and Flow Measurement, Precision Instrumentation, Environmental Monitoring, Battery-Powered Sensor Node.
Single-Phase Energy Metering
The MCP3901A0-E/SS is well suited to single-phase energy meters requiring simultaneous current and voltage acquisition. Its two synchronous delta-sigma channels support selectable 16-bit or 24-bit resolution at up to 64 kSPS, while the two integrated programmable-gain amplifiers help condition low-level sensor outputs. The 91 dB maximum SINAD and -104 dBc THD are meaningful for preserving waveform detail during rms power and energy calculations. The 20 MHz SPI-compatible interface allows the converter to transfer samples efficiently to a metering controller. Designers should configure the PGA ranges and filter parameters to match the current and voltage sensors rather than assuming the analog inputs are interchangeable.
추천
Industrial Sensor Acquisition
MCP3901A0-E/SS can acquire two low-level industrial sensor outputs through its integrated analog front end. The selectable 24-bit mode supports high-resolution measurements, while operation at 64 kSPS gives the controller enough temporal data for process monitoring and control. Two PGA channels reduce the amount of external amplification required when sensors have different output ranges. Up to 91 dB SINAD is useful when the measurement includes a small signal riding on a larger common-mode level. The SPI-compatible serial interface supports compact embedded hardware, and the internal voltage reference helps establish a repeatable conversion baseline. Input protection, filtering, and isolation should be designed around the sensor and industrial environment.
추천
Pressure and Flow Measurement
The dual-channel architecture of MCP3901A0-E/SS fits pressure and flow instruments that need synchronized measurement from two sensing elements. Simultaneous sampling reduces the timing offset between channels, which is important when comparing a primary sensor with a compensation or reference signal. The converter can operate in 24-bit mode for high-resolution results or 16-bit mode when the system prioritizes throughput and filtering. Integrated PGAs help match the ADC to low-level bridge or transducer outputs, and the internal reference supports consistent calibration. The 20 MHz SPI-compatible interface permits rapid sample transfer without requiring a parallel data bus, making the AFE suitable for compact instrumentation with limited board space.
추천
Precision Instrumentation
MCP3901A0-E/SS is useful in laboratory and process instrumentation where two analog channels must be digitized with high resolution. Its 24-bit operating mode captures fine signal detail, while the maximum 91 dB SINAD supports measurements with demanding noise and distortion limits. The two programmable-gain amplifiers allow each channel to use an appropriate sensitivity range, and the internal reference reduces the external component count. The delta-sigma architecture is particularly appropriate for slowly changing or continuously sampled analog quantities that do not require a high-latency, high-rate SAR converter. Firmware should implement the digital filter and settle time appropriate to the selected resolution and output-data rate before using measurements for calibration.
추천
Environmental Monitoring
The MCP3901A0-E/SS can digitize paired outputs from environmental sensors such as gas, humidity, or multi-axis sensing assemblies. Two synchronous channels are valuable when a system measures a sensor signal alongside a reference, temperature-compensation channel, or second sensing axis. The selectable 16-bit and 24-bit modes let the embedded controller optimize between measurement detail and communication bandwidth, while the integrated PGAs support low-level sensor outputs. The internal reference and dithering algorithm help support stable conversion results, including reduced idle tones in suitable operating conditions. Low-power sensor systems should also account for the AFE's continuous analog and digital supply requirements and disable or control external circuitry when measurements are not required.
추천
Battery-Powered Sensor Node
MCP3901A0-E/SS is suitable for compact battery-powered sensor nodes that periodically measure two analog channels and then transmit the results through a serial microcontroller interface. The selectable 16-bit mode can reduce conversion and processing demand when full 24-bit resolution is unnecessary, while the 20 MHz SPI-compatible link supports rapid transfer when higher-resolution data is required. The internal reference and integrated PGAs simplify the analog signal path, potentially reducing board area and component count. Because the part is an analog front end rather than a low-power energy-harvesting device, overall energy consumption depends on the chosen mode, sampling frequency, controller behavior, and external sensor load. Duty-cycling should preserve the required startup and settling behavior.
추천
추천 제품 요약
엔지니어링 참조 데이터: MCP3901A0-E/SS — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MCP3901A0-I/SS | MCP3901A1-I/SS | MCP3901A1-E/SS |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-SSOP | 20-SSOP - same | 20-SSOP - same | 20-SSOP - same |
| ADC Architecture | Delta-sigma | Delta-sigma | Delta-sigma | Delta-sigma |
| Number of Channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Resolution | 16-bit or 24-bit selectable | 16-bit or 24-bit selectable | 16-bit or 24-bit selectable | 16-bit or 24-bit selectable |
| Maximum Conversion Rate | 64 kSPS | 64 kSPS | 64 kSPS | 64 kSPS |
| Digital Interface | SPI compatible, up to 20 MHz | SPI compatible | SPI compatible | SPI compatible |
| PGA Configuration | A0 configuration with 2 integrated PGAs | A0 configuration with 2 integrated PGAs | A1 configuration with 2 integrated PGAs | A1 configuration with 2 integrated PGAs |
| Ordering Grade | E extended commercial grade | I industrial grade | I industrial grade | E extended commercial grade |
주요 차별점
- Closest same-footprint ordering-code match (vs MCP3901A0-I/SS)
- Higher-resolution metering capability (vs MCP3208)
- Selectable operating resolution for design optimization (vs MCP3901A0-I/SS)
- Integrated dual-channel gain and reference functions (vs MCP3901A1-E/SS)
설계 노트
Use the manufacturer package drawing and pin-description table to create the 20-pin SSOP footprint. Keep analog input traces short, place their filtering components close to the associated pins, and maintain a continuous analog ground path beneath the device where the recommended layout permits. Route the SPI clock, data, and control signals away from sensitive input nets to minimize capacitive coupling and digital noise.
The MCP3901A0-E/SS uses separate analog and digital supply ranges: 4.5 V to 5.5 V analog and 2.7 V to 5.5 V digital. Follow the datasheet's recommended bypass-capacitor values and placement. Decouple the analog rail close to the supply pins, keep high-current return paths away from the reference and analog input area, and account for the difference between the two rails when operating below 5 V.
Select the 16-bit or 24-bit operating mode together with the required digital-filter bandwidth and output-data rate rather than treating 64 kSPS as a standalone performance target. The delta-sigma conversion process introduces filtering and settling behavior that affects transient measurements. Verify the filter configuration, gain range, calibration coefficients, and channel timing against the sampling requirements of the application.
Do not substitute an A0, A1, or A0T ordering code without reviewing the PGA table and firmware configuration. Although the alternatives use the same 20-SSOP footprint, a changed gain option can alter gain, offset, full-scale range, and calibration behavior. Also verify the temperature grade, analog supply requirement, and exact register-compatible configuration before approving a production substitution.
규정 준수 정보
The component is an industrial or metering analog front end rather than an automotive-qualified device. Compliance declarations for the exact ordering code require confirmation from Microchip or the authorized supply channel.