Microchip Technology

MCP601T-E/ST - 2.8MHz R-R CMOS Op Amp | Microchip

MPN: MCP601T-E/ST ✓ Hoạt động
2.7 V to 6.0 V Vdss 230 uA Id 8-pin TSSOP Package
MOQ: 1 |

MCP601T-E/ST Tóm tắt

The Microchip Technology MCP601T-E/ST is a single, general-purpose CMOS operational amplifier with a 2.8 MHz gain-bandwidth product, a 2.7 V to 6.0 V supply range, and a typical operating current of 230 uA. The device is packaged in an 8-pin TSSOP and provides rail-to-rail output swing, low bias current, high open-loop gain, and an input offset voltage below 2 mV.

A CMOS operational amplifier is an active analog signal-conditioning device that uses high-input-impedance differential inputs to amplify the difference between two voltages. The amplifier sits in the signal-chain hierarchy between sensors, transducers, and analog sources on the input side and analog-to-digital converters, filters, control loops, and measurement equipment on the output side. The MCP601 family is designed for general-purpose applications requiring low power, rail-to-rail output operation, and single-supply operation from 2.7 V to 6.0 V.

Key features include a 2.8 MHz gain-bandwidth product, which supports useful closed-loop bandwidth at modest gains, and typical operating current of 230 uA for battery-powered and portable systems. Rail-to-rail output swing allows the output to approach the supply rails under suitable load conditions. The less-than-2 mV input offset specification supports precision-enough DC amplification for sensor interfaces, filtering, buffering, and audio preamplifier stages, while low bias current helps preserve high source impedance.

The MCP601 uses Microchip's advanced CMOS process technology to combine low power consumption with high open-loop gain and rail-to-rail output performance. Its 2.7 V minimum supply voltage supports 3.3 V systems, while the 6.0 V upper limit provides headroom for 5 V rails. Because stability, output swing, noise, and drive capability depend on supply voltage, load current, and feedback configuration, the manufacturer datasheet should be consulted for the operating curves and application limits used in a specific design.

Typical uses include low-power sensor conditioning, current-to-voltage conversion, analog filtering, audio signal amplification, battery-powered instrumentation, and general buffering around microcontrollers. The TSSOP package is appropriate for compact surface-mount designs, while the low operating current is useful when the amplifier must operate continuously from a limited energy source.

When laying out the circuit, place the bypass capacitor close to the supply pin and keep feedback traces short to minimize noise pickup and unwanted coupling. Verify the required common-mode range, output swing, capacitive-load drive, and stability for the selected gain before releasing the layout. This page combines manufacturer specifications, sourcing information, application guidance, and same-footprint alternatives for faster component evaluation.

Bộ thay thế dễ dàng lắp đặt cho MCP601T-E/ST — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MCP601T-E/ST (cùng hình factor và footprint) — khác nhau ở Number of Circuits, Package, Amplifier Type, Supply Voltage Range, Technology.

Microchip Technology
Package: 8-lead TSSOP
Amplifier Type: Single general-purpose CMOS operational amplifier
Supply Voltage Range: 2.7 V to 5.5 V
Microchip Technology
Number of Circuits: 1 circuit
Technology: Advanced CMOS

MCP601T-I/ST

✅ Drop-In
Microchip Technology
📦 8-pin TSSOP
1 circuit · General-purpose operational amplifier · 2.8 MHz · 230 uA · <2 mV · 1 pA · 2.3 V/us · Rail-to-rail

Liên hệ để biết giá

Xem tài liệu →

MCP601-I/ST

✅ Drop-In
Microchip Technology
📦 8-pin TSSOP
Single general-purpose CMOS operational amplifier · 1 · 2.7 V to 5.5 V · 2.7 V · 5.5 V · Rail-to-rail · Less than 325 uA · CMOS

Liên hệ để biết giá

Xem tài liệu →

MCP601T-E/ST Tỷ lệ tối đa & tính chất điện

Amplifier Type Single general-purpose operational amplifier
Supply Voltage Range 2.7 V to 6.0 V
Gain-Bandwidth Product 2.8 MHz
Typical Operating Current 230 uA
Input Offset Voltage Less than 2 mV
Output Swing Rail-to-rail
Bias Current Low; exact value not listed
Open-Loop Gain High; exact value not listed
Process Technology Advanced CMOS
Number of Circuits 1
Number of Inputs 2
Số lượng đầu ra 1
Hộp 8-pin TSSOP
Kiểu lắp đặt Surface mount

Hướng dẫn cấu hình chân MCP601T-E/ST 8-pin tssop

Cấu hình chân cho MCP601T-E/ST (8-pin tssop gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 8-pin tssop cho MCP601T-E/ST

Không có dữ liệu chân cụ thể sẵn có cho MCP601T-E/ST.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MCP601T-E/ST phù hợp cho 6 Áp dụngs: Low-Power Sensor Signal Conditioning, Battery-Powered Portable Instrumentation, Analog Filtering and Active Gain Stages, Audio Preamplifier and Buffering, Current-to-Voltage Conversion, Industrial Process-Control Loops.

🧩

Low-Power Sensor Signal Conditioning

The MCP601T-E/ST is suitable for conditioning the output of a resistive sensor when the circuit operates from a 3.3 V or 5 V rail. Its input bias current is characterized as low, helping preserve the signal from a high-impedance source, while the less-than-2 mV offset specification supports DC amplification at moderate gains. The 230 uA typical operating current also limits the amplifier's contribution to a power budget. Configure it in a non-inverting or differential stage, place the feedback network close to the device, and verify the sensor's source impedance against the input-bias-current and noise requirements before finalizing the gain.

📱

Battery-Powered Portable Instrumentation

The MCP601T-E/ST fits portable measurement systems where a single amplifier must operate from a compact 2.7 V to 6.0 V supply and consume little current. A 230 uA typical operating current helps preserve battery life in continuous-monitoring systems, and the 2.8 MHz gain-bandwidth product supports low-frequency measurement, filtering, and buffering stages. The rail-to-rail output can maximize usable signal swing from a 3.3 V supply. In a portable instrument, confirm the amplifier's quiescent current at the actual supply voltage and evaluate the sensor, reference, and leakage currents before calculating the complete system power budget.

🔧

Analog Filtering and Active Gain Stages

The MCP601T-E/ST can implement active low-pass filters or modest gain stages when the signal bandwidth is well below its 2.8 MHz gain-bandwidth product. Use the device in an inverting, non-inverting, or differential topology and select resistor and capacitor values to obtain the required pole and closed-loop gain. The 2.7 V to 6.0 V operating range supports both 3.3 V and 5 V analog sections. Check the closed-loop response and stability for the chosen noise gain, especially if the amplifier drives a capacitive input, an ADC sampling network, or a long PCB trace.

🎧

Audio Preamplifier and Buffering

The MCP601T-E/ST can buffer a small audio signal before an analog-to-digital converter or a following gain stage. Its rail-to-rail output helps retain signal amplitude from a single 3.3 V or 5 V supply, while the 2.8 MHz gain-bandwidth product covers many low-bandwidth audio buffering tasks. Use low-noise resistors and capacitors around the amplifier and keep input and feedback routing compact. This device is most appropriate for general-purpose low-level buffering; verify input-referred noise, distortion, output-current capability, and the ADC's input-impedance requirements before using it in a precision audio path.

⚡

Current-to-Voltage Conversion

The MCP601T-E/ST can convert a small shunt current into a measurable voltage for a current sensor, protection circuit, or power-monitoring system. Its low bias current reduces the error introduced when sensing a low-value shunt, and the less-than-2 mV offset specification limits the DC error at the input. The 2.8 MHz gain-bandwidth product provides margin for moderate-bandwidth current signals. Select the shunt and feedback resistor to limit power dissipation, confirm that common-mode voltage remains within the allowed input range, and check the amplifier output against the limits of the downstream converter.

🏭

Industrial Process-Control Loops

The MCP601T-E/ST can serve as the error amplifier or buffer in a compact 3.3 V or 5 V process-control interface. Its rail-to-rail output supports low-voltage actuator and control-node drive, while the 2.8 MHz gain-bandwidth product is adequate for many slow feedback loops and conditioning stages. The single amplifier and 8-pin TSSOP package simplify compact board layouts. Before using it in a feedback loop, verify stability with the actual sensor capacitance, compensation network, and output loading. Industrial designs should also confirm the required temperature grade and any extended qualification obligations for the deployed environment.

What is the MCP601T-E/ST?
The MCP601T-E/ST is a single general-purpose CMOS operational amplifier from Microchip Technology. It combines a 2.8 MHz gain-bandwidth product, a 2.7 V to 6.0 V supply range, rail-to-rail output swing, and a typical operating current of 230 uA in an 8-pin TSSOP package. According to the Microchip MCP601 product page, its low bias current and high open-loop gain make it suitable for portable and precision signal-conditioning applications.
What is the operating voltage of MCP601T-E/ST?
The MCP601T-E/ST operates from 2.7 V to 6.0 V. This range supports 3.3 V and 5 V single-supply systems. The manufacturer identifies the MCP601 as a 2.7 V minimum-supply CMOS operational amplifier with rail-to-rail output capability. Use the manufacturer datasheet to confirm input common-mode range and output-swing limits at the specific supply voltage and load current used in the circuit.
What is the gain-bandwidth product of MCP601T-E/ST?
The MCP601T-E/ST has a gain-bandwidth product of 2.8 MHz. According to the Microchip MCP601 product page, this value is the nominal closed-loop bandwidth that can be expected at approximately unity gain under the stated test conditions. Higher closed-loop gains reduce usable bandwidth, so the amplifier is best suited to moderate-gain stages rather than wideband closed-loop applications.
Does the MCP601T-E/ST support rail-to-rail output?
Yes, the MCP601T-E/ST provides rail-to-rail output swing. Microchip describes the MCP601 family as offering rail-to-rail output swing for single-supply operation. This allows the output to move closer to the positive or negative supply rail than a conventional non-rail-to-rail amplifier, making the device suitable for 3.3 V and 5 V systems where usable output headroom is limited.
How much current does the MCP601T-E/ST consume?
The MCP601T-E/ST has a typical operating current of 230 uA, according to the Microchip MCP601 product page. This low supply consumption supports battery-powered sensors, portable instruments, and mixed-signal systems in which every amplifier contributes to the total system budget. The exact maximum-current limit and its test conditions should be taken from the manufacturer datasheet for worst-case power calculations.
Where can I download the MCP601T-E/ST datasheet?
The MCP601T-E/ST datasheet is available from the Microchip MCP601 product page at https://www.microchip.com/en-us/product/MCP601. It is also indexed through the Octopart datasheet entry for this exact orderable part. Use the manufacturer document for authoritative pin assignments, electrical characteristics, recommended operating conditions, and application guidance before committing the circuit to production.
Where can I find the MCP601T-E/ST pinout?
The MCP601T-E/ST pinout is documented in the pin-description section of the manufacturer datasheet for the MCP601 family. The part uses an 8-pin TSSOP package, and the package drawing identifies the physical pin numbering and pin-1 orientation. Assign PCB tracks from that pin-description table rather than inferring connections from the functional block diagram.
What is the input offset voltage of MCP601T-E/ST?
The MCP601T-E/ST has an input offset voltage of less than 2 mV, as stated on the Microchip MCP601 product page. This is the differential voltage that must appear between the inputs to produce a zero output under ideal DC conditions. For high-gain or high-precision designs, evaluate the maximum offset specification, input bias current, temperature drift, and resistor matching rather than relying only on the typical value.
When should I choose the MCP601T-E/ST over another single op amp?
Choose the MCP601T-E/ST when a compact, low-power amplifier operating from 2.7 V to 6.0 V is needed. Its 2.8 MHz gain-bandwidth product, 230 uA typical operating current, rail-to-rail output, and 8-pin TSSOP package form a useful combination for sensor buffering, filtering, and portable analog signal conditioning. Choose a faster amplifier when the required closed-loop bandwidth substantially exceeds the 2.8 MHz gain-bandwidth product.
What is the best drop-in replacement for MCP601T-E/ST?
The closest same-footprint replacement is the MCP601T-I/ST, which retains the MCP601T family electrical configuration in an 8-pin TSSOP package and changes the grade suffix. The MCP601-I/ST is another related 8-pin TSSOP option with a different grade suffix. Drop-in use still requires checking the manufacturer datasheets for temperature grade, supply voltage, offset, and production qualification requirements.
Can MCP601T-I/ST replace MCP601T-E/ST?
The MCP601T-I/ST can be considered a same-family, same-package replacement for the MCP601T-E/ST because both belong to the MCP601T line and use an 8-pin TSSOP footprint. The grade suffix changes the specified temperature or qualification class, so the relevant electrical and quality requirements must be compared before substitution. The MCP601-I/ST is another TSSOP alternative with a distinct grade suffix.
Is MCP601T-E/ST the same as MCP601T-E/OT?
No. The MCP601T-E/ST and MCP601T-E/OT share the MCP601T amplifier family but use different package suffixes. The ST version is an 8-pin TSSOP, while the OT version uses a different package configuration and therefore does not share the same PCB footprint. The OT part is not a drop-in replacement for an existing TSSOP layout.
What can replace the MCP601T-E/ST on the same PCB?
The MCP601T-I/ST is the most directly comparable replacement for the MCP601T-E/ST because it retains an 8-pin TSSOP package and the same MCP601T family architecture. The MCP601-I/ST is another related option in the same package. Neither should be substituted solely from the order code; verify the pin configuration, supply limits, electrical characteristics, grade requirements, and availability against the manufacturer datasheets.
What are the key specifications of MCP601T-E/ST?
The principal MCP601T-E/ST specifications are a 2.8 MHz gain-bandwidth product, a 2.7 V to 6.0 V supply range, 230 uA typical operating current, less than 2 mV input offset voltage, and rail-to-rail output swing. The device is a single amplifier in an 8-pin TSSOP package. These figures place it among compact, low-power CMOS op amps intended for general-purpose signal conditioning.
Where can I buy MCP601T-E/ST online?
Use the Request a Quote form on this page to request current MCP601T-E/ST pricing, stock status, and lead time for the 8-pin TSSOP configuration. Quote requests allow the order quantity and packaging requirements to be confirmed together. The manufacturer MCP601 product page also supports technical evaluation of the device family before a sourcing commitment is made.
How much does MCP601T-E/ST cost?
Current commercial terms for the MCP601T-E/ST are provided through the Request a Quote form on this page. Submit the required quantity, packaging preference, and target delivery location so the quote can reflect current sourcing conditions. The same request can be used to confirm stock allocation, manufacturer lead time, and scheduled shipment availability.
Is MCP601T-E/ST in stock and what is its lead time?
Current MCP601T-E/ST inventory and lead time should be confirmed through the Request a Quote form on this page. The form supports quantity-specific scheduling and can identify whether additional manufacturing time is required. For production planning, distinguish a distributor allocation from Microchip's manufacturing lead time and request the earliest confirmed date for the required order quantity.

Dữ liệu tham khảo kỹ thuật cho MCP601T-E/ST — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Select the MCP601T-E/ST for compact, low-power analog signal conditioning on a 2.7 V to 6.0 V supply. Its 2.8 MHz gain-bandwidth product, rail-to-rail output, low bias current, and less-than-2 mV offset are well suited to sensor buffering, filtering, current-to-voltage conversion, and general 3.3 V or 5 V analog stages. Choose the MCP601T-I/ST when its grade better matches the application's qualification requirements while retaining the same TSSOP footprint. The MCP601-I/ST is another same-family TSSOP option, but its grade suffix must be reviewed before use. For designs needing substantially more bandwidth, lower offset, lower noise, wider input common-mode range, or different output-drive capability, specify another amplifier rather than treating these family variants as performance upgrades. Always confirm the pin assignments and electrical limits in the manufacturer datasheet.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này MCP601T-I/ST MCP601-I/ST
Brand Microchip Technology Microchip Technology Microchip Technology
Package 8-pin TSSOP 8-pin TSSOP 8-pin TSSOP
Amplifier Type Single general-purpose CMOS operational amplifier Single general-purpose CMOS operational amplifier Single general-purpose CMOS operational amplifier
Supply Voltage Range 2.7 V to 6.0 V 2.7 V to 6.0 V 2.7 V to 6.0 V
Gain-Bandwidth Product 2.8 MHz 2.8 MHz 2.8 MHz
Typical Operating Current 230 uA 230 uA 230 uA
Input Offset Voltage Less than 2 mV Less than 2 mV Less than 2 mV
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail
Input Bias Current Low Low Low
Process Technology Advanced CMOS Advanced CMOS Advanced CMOS

Bảo phân biệt quan trọng

  • Low-power operation in a compact general-purpose amplifier (vsMCP601T-I/ST)
  • Single-supply compatibility for 3.3 V and 5 V systems (vsMCP601-I/ST)
  • Same-footprint family sourcing path (vsMCP601T-I/ST)

Ghi chú thiết kế

Route the power pin directly to a decoupling capacitor and place that capacitor close to the device. Keep the feedback-resistor network close to the amplifier inputs and outputs to reduce parasitic coupling. For analog signals entering the PCB from connectors or sensors, use a short trace over a quiet ground reference and separate the route from digital clock and switching-current paths.

Do not assume that rail-to-rail output guarantees the input can operate across the complete supply range. Check the input common-mode range and output-swing curves in the manufacturer datasheet for the selected supply voltage. Also account for the amplifier's offset, bias current, and noise when setting the gain of a high-impedance sensor stage, and verify capacitive-load stability before attaching a long cable or ADC input.

For battery-powered designs, include the MCP601T-E/ST's 230 uA typical operating current in the continuous power budget. Estimated: operation from 3.3 V at 230 uA consumes approximately 0.76 mW of amplifier supply power. The actual figure can differ with supply voltage, output activity, and temperature, so use maximum specifications for a worst-case battery-life estimate.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

The general-purpose MCP601 amplifier is not identified as an AEC-Q100 automotive device. Specific environmental-compliance declarations should be confirmed for the exact orderable MPN through Microchip's product documentation.

Tìm kiếm liên quan

mcp601t datasheet MCP601T-E/ST datasheet MCP601T-E/ST datasheet pdf MCP601T-E/ST pinout MCP601T-E/ST schematic MCP601T-E/ST equivalent MCP601T-E/ST replacement MCP601T-E/ST cross reference MCP601T-E/ST vs MCP601T-I/ST MCP601T-E/ST TSSOP footprint MCP601T-E/ST price MCP601T-E/ST stock Microchip MCP601T-E/ST MCP601 2.8MHz rail-to-rail op amp MCP601T-E/ST sensor signal conditioning

Các bộ phận và thuật ngữ liên quan

Microchip Technology MCP601T-E/ST MCP601T-I/ST MCP601-I/ST MCP601T-E/OT MCP601-E/SN operational amplifier CMOS operational amplifier single-supply amplifier rail-to-rail output gain-bandwidth product input offset voltage input bias current low-power analog signal conditioning active filter current-to-voltage conversion sensor interface audio preamplifier process control advanced CMOS technology 8-pin TSSOP TSSOP package family surface-mount package RoHS REACH
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ