Microchip Technology

MCP6031-E/MC - 10kHz Low-Power Precision Op Amp | Microchip

MPN: MCP6031-E/MC ✓ Hoạt động
1.8 V Vdss 900 nA typical Id 8-DFN, 2 mm × 3 mm Package
MOQ: 1 |

MCP6031-E/MC Tóm tắt

Microchip Technology MCP6031-E/MC is a single-amplifier, precision operational amplifier with a 10 kHz gain-bandwidth product, 900 nA typical operating current, input offset voltage below 150 µV, and an 8-pin DFN package measuring 2 mm by 3 mm. The device operates from a 1.8 V minimum single supply and supports an 18 V maximum supply, making it suitable for compact, low-voltage analog systems.

An operational amplifier is a voltage-gain element used in feedback-based analog circuits. The MCP6031 belongs to the broader hierarchy of operational amplifier, analog amplifier, analog IC, and semiconductor. Its low-power CMOS implementation, rail-to-rail input and output capability, and precision-oriented offset characteristics make it particularly useful when signal conditioning must coexist with strict battery-life or board-area constraints.

Three headline characteristics define the MCP6031-E/MC. Its 10 kHz gain-bandwidth product supports low-frequency closed-loop amplification and filtering, while its typical 900 nA operating current reduces the power burden in continuously powered equipment. The maximum input offset voltage of 150 µV supports accurate sensing of low-level signals. Rail-to-rail input and output operation provides usable input and output ranges near the supply rails in the manufacturer’s stated operating conditions.

The MCP6031 uses Microchip’s advanced CMOS technology, which provides low bias current, high open-loop gain, low operating current, and rail-to-rail input and output swing. These characteristics are especially valuable in battery-powered instrumentation where amplifier current can dominate the standby budget. The 8-DFN package also reduces PCB footprint, although its exposed thermal pad and fine-pitch leads require careful PCB layout and assembly planning.

Typical applications include portable sensor interfaces, low-power battery monitoring, medical-device signal conditioning, industrial process measurement, low-level current sensing, and general-purpose precision analog modules. In each case, the 10 kHz bandwidth is sufficient for slow sensor and control signals rather than high-speed waveform processing.

Design around the device’s low-speed operating range and confirm stability, output-current capability, capacitive-load behavior, and input-bias-current requirements from the manufacturer datasheet. Place the exposed pad on a suitable ground plane, maintain the recommended bypass-capacitor arrangement, and validate noise performance in the complete analog system rather than relying on the amplifier alone.

This product page combines manufacturer specifications, package information, verified pricing records, engineering-oriented application guidance, and clearly qualified replacement considerations. It helps engineers distinguish functional family members from true pin-compatible drop-in alternatives while making the principal design tradeoffs explicit.

Bộ thay thế dễ dàng lắp đặt cho MCP6031-E/MC — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.

Yêu cầu các bộ thay thế

MCP6031-E/MC Tỷ lệ tối đa & tính chất điện

Amplifier Type Single general-purpose precision operational amplifier
Number of Channels 1 channel
Gain-Bandwidth Product 10 kHz
Minimum Single-Supply Voltage 1.8 V
Maximum Single-Supply Voltage 18 V
Input Offset Voltage 150 µV maximum
Điện áp yên tĩnh 900 nA typical
Input Common-Mode Range Rail-to-rail input
Output Swing Rail-to-rail output
Process Technology Advanced CMOS
Hộp 8-DFN, 2 mm × 3 mm
Exposed Thermal Pad Present
Kiểu lắp đặt Surface mount
Temperature Grade Extended-temperature grade

Hướng dẫn cấu hình chân MCP6031-E/MC 8-dfn, 2 mm × 3 mm

Cấu hình chân cho MCP6031-E/MC (8-dfn, 2 mm × 3 mm gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 8-dfn, 2 mm × 3 mm cho MCP6031-E/MC

Không có dữ liệu chân cụ thể sẵn có cho MCP6031-E/MC.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

MCP6031-E/MC phù hợp cho 6 Áp dụngs: Battery-Powered Sensor Conditioning, Portable Medical Monitoring, Industrial Process Measurement, Low-Power Current Sensing, Precision Bridge Signal Conditioning, Low-Power IoT Signal Conditioning.

🧩

Battery-Powered Sensor Conditioning

The MCP6031-E/MC fits low-level sensor interfaces because its 900 nA typical operating current minimizes standby demand and its 150 µV maximum input offset voltage supports accurate amplification of small signals. Place it in a non-inverting or differential conditioning stage powered from a regulated rail no lower than 1.8 V. Rail-to-rail input and output operation improves usable signal range in compact battery-powered products. Its 10 kHz gain-bandwidth product is appropriate for temperature, pressure, and inertial sensors with slow output bandwidth, but it should not be selected for high-speed waveform acquisition.

💊

Portable Medical Monitoring

The MCP6031-E/MC is appropriate for low-frequency medical monitoring circuits where battery life and signal accuracy are both important. Its 900 nA typical current reduces amplifier overhead, while the 150 µV maximum offset specification helps preserve accuracy when conditioning small sensor voltages. The 1.8 V minimum supply supports compact single-rail systems, and the 2 mm × 3 mm 8-DFN package reduces board area. The designer must account for the 10 kHz bandwidth limit, noise behavior, isolation requirements, and applicable medical-quality procedures for the finished instrument.

🏭

Industrial Process Measurement

The MCP6031-E/MC can buffer and amplify low-frequency process signals generated by resistive or transducer-based sensors. Its 18 V maximum supply accommodates conventional industrial signal ranges, while rail-to-rail input and output operation helps use the available supply span efficiently. The 150 µV maximum offset voltage is valuable for precision measurements, and the 10 kHz bandwidth is suitable for temperature, pressure, and flow signals that change slowly. Front-end protection, grounding, filtering, and calibration remain essential when connecting field wiring to sensitive analog circuitry.

⚡

Low-Power Current Sensing

The MCP6031-E/MC is suitable for amplifying the voltage generated by a current-sense element when the required signal bandwidth is below its 10 kHz gain-bandwidth product. Low bias current reduces loading of the sensed node, while the 150 µV maximum offset voltage supports accurate measurement of small differential voltages. A 1.8 V or higher single supply simplifies low-energy system integration, and the compact 8-DFN package preserves board area. Confirm input common-mode limits, output swing, bias-current effects, and layout-induced errors using the manufacturer electrical characteristics before using it above ground.

🔧

Precision Bridge Signal Conditioning

The MCP6031-E/MC can serve as an amplifier element in a bridge-based measurement circuit when low offset and low current are more important than high bandwidth. Its 150 µV maximum input offset voltage and low-bias-current CMOS architecture are useful for preserving weak differential signals, while rail-to-rail operation provides flexibility in single-supply designs. The 10 kHz bandwidth is suitable for resistive load cells and temperature bridges with slowly varying outputs. Use careful resistance matching, guard routing, input filtering, and excitation-voltage regulation to prevent drift and common-mode errors from overwhelming the measurement.

🧩

Low-Power IoT Signal Conditioning

The MCP6031-E/MC is appropriate for IoT sensor nodes that spend substantial time in low-power states and require a compact analog front end. Its 900 nA typical operating current is well matched to energy-conscious sensor conditioning, and the 2 mm × 3 mm 8-DFN package supports dense board layouts. A supply starting at 1.8 V permits direct operation from common low-voltage rails. Its 10 kHz bandwidth covers many environmental and occupancy sensors, but the design should avoid fast transient signals and should account for the amplifier’s input noise, offset drift, and settling behavior.

Tóm tắt các sản phẩm được đề xuất

MCP6032-E/MC Dual-member family option for differential or multichannel sensor conditioning Được sử dụng trong: Battery-Powered Sensor Conditioning, Portable Medical Monitoring, Industrial Process Measurement, Low-Power Current Sensing, Precision Bridge Signal Conditioning, Low-Power IoT Signal Conditioning MCP6033-E/MC Quad-member family option for multi-sensor analog channels Được sử dụng trong: Battery-Powered Sensor Conditioning, Industrial Process Measurement, Low-Power Current Sensing, Precision Bridge Signal Conditioning MCP6031-E/MC Microchip Technology Được sử dụng trong: Portable Medical Monitoring, Low-Power IoT Signal Conditioning
What are the key specifications of MCP6031-E/MC that engineers should know?
The MCP6031-E/MC is a single-channel, low-power precision operational amplifier with a 10 kHz gain-bandwidth product, 900 nA typical quiescent current, input offset voltage of 150 µV maximum, and rail-to-rail input and output operation. According to the Microchip MCP6031/2/3/4 Data Sheet DS20002041C, the device supports single-supply operation down to 1.8 V, while distributor documentation identifies an 18 V maximum supply rating. It is packaged in an 8-DFN package measuring 2 mm × 3 mm.
What is the operating voltage range of MCP6031-E/MC?
The MCP6031-E/MC operates from a 1.8 V minimum single supply up to 18 V. The lower limit allows operation from low-energy cells and regulated rails commonly found in portable instrumentation, while the 18 V upper limit accommodates higher-voltage industrial signal chains. According to the Microchip MCP6031/2/3/4 Data Sheet DS20002041C, the family operates with a single-supply voltage as low as 1.8 V. Confirm the complete electrical limits and common-mode operating area in the manufacturer datasheet before finalizing a power-supply design.
What is the gain bandwidth and operating current of MCP6031-E/MC?
The MCP6031-E/MC has a 10 kHz gain-bandwidth product and consumes 900 nA of typical operating current per amplifier. The 10 kHz bandwidth is appropriate for low-frequency sensor signals, buffering, and active filtering, rather than high-speed data acquisition. According to the Microchip MCP6031 product page and MCP6031/2/3/4 Data Sheet DS20002041C, the CMOS architecture combines low current with low bias current and rail-to-rail operation.
Where can I download the MCP6031-E/MC datasheet PDF?
The official MCP6031-E/MC datasheet is available from Microchip Technology through the manufacturer PDF link on this page. The document is the MCP6031/2/3/4 family Data Sheet DS20002041C and covers the MCP6031, MCP6032, MCP6033, and MCP6034 operational amplifiers. Use the pin-description table, electrical-characteristics table, and application information in that document when assigning PCB tracks, selecting decoupling capacitors, and confirming the extended-temperature limits.
Where can I find the MCP6031-E/MC pinout?
The MCP6031-E/MC pin assignment is found in the pin-description table of the Microchip MCP6031/2/3/4 Data Sheet DS20002041C. The device uses an 8-DFN package with an exposed pad, so the land pattern must include the thermal-pad connection and its thermal and electrical requirements. Use the package drawing and recommended PCB land pattern in the manufacturer documentation rather than assigning connections solely from a generic 8-pin outline.
Is MCP6031-E/MC suitable for battery-powered sensor interfaces?
The MCP6031-E/MC is well suited to low-power sensor interfaces because its typical operating current is 900 nA and its single-supply operation starts at 1.8 V. Its rail-to-rail input and output capability also supports signal conditioning near the supply limits. According to the Microchip MCP6031/2/3/4 Data Sheet DS20002041C, the low-current CMOS family is intended for battery-powered applications. The 10 kHz bandwidth should be matched to slow sensor signals rather than high-speed waveforms.
What can replace MCP6031-E/MC?
No verified cross-manufacturer drop-in replacement for MCP6031-E/MC is established by the available manufacturer and cross-reference records. A valid replacement must use the same 8-DFN 2 mm × 3 mm land pattern, preserve pin-to-pin connections, and remain within 30% of the principal operating parameters. Microchip family members such as MCP6031T-E/MC differ by ordering designation, while MCP6031-E/SN uses a different package, so neither should be presented as a drop-in replacement without footprint and datasheet verification.
Is MCP6031-E/MC the same as MCP6031T-E/MC?
The MCP6031-E/MC and MCP6031T-E/MC are closely related Microchip orderable designations, but they must not be treated as interchangeable without confirming the manufacturer ordering table and package drawing. The MCP6031-E/MC is specified in an 8-DFN 2 mm × 3 mm package. The MCP6031T-E/MC record identifies the same base amplifier family but does not by itself establish every commercial, terminal, or packaging attribute. Verify the ordering code before using it as a production substitute.
When should I choose MCP6031-E/MC over MCP6031-E/SN?
Choose MCP6031-E/MC when PCB area is a primary constraint and the design can use an 8-DFN 2 mm × 3 mm footprint with a properly connected exposed pad. MCP6031-E/SN is available in a larger leaded package, which can simplify hand assembly, inspection, and prototyping. According to Microchip’s MCP6031 family information, both orderings belong to the low-power MCP6031 family, so the decisive factors are package construction, assembly capability, availability, and board-layout requirements rather than the 10 kHz bandwidth or 900 nA typical current.
How does MCP6031-E/MC compare with MCP6032 and MCP6033?
MCP6031-E/MC is the single-amplifier member, while MCP6032 and MCP6033 are the dual and quad members of the same Microchip operational-amplifier family. The family shares the 1.8 V minimum supply, 10 kHz gain-bandwidth class, 900 nA typical current per amplifier, 150 µV maximum offset voltage, and rail-to-rail operation. According to Microchip MCP6031/2/3/4 Data Sheet DS20002041C, channel count and package options determine the appropriate member for each board.
What is the best Microchip equivalent for MCP6031-E/MC?
The closest verified Microchip-family ordering is MCP6031T-E/MC, but its status as a production drop-in must be confirmed against Microchip’s ordering information because it differs by ordering designation. MCP6032 and MCP6033 are not drop-in substitutes because they change the channel count and package requirements. According to the Microchip MCP6031 product family information, MCP6031 is available in several package options; only an ordering variant with the same 8-DFN footprint and identical pin arrangement should be considered a direct replacement.
Where can I buy MCP6031-E/MC online?
Use the Request a Quote form on this page to request current MCP6031-E/MC availability, unit pricing, minimum order quantity, and lead time for the exact 8-DFN ordering code. Stock and delivery schedules change by quantity and date, so request a current quotation rather than relying on a static listing. The manufacturer product page and the exact-MPN distributor records confirm the identity of MCP6031-E/MC and provide the datasheet and package references needed for qualification.
What is the price of MCP6031-E/MC?
The current unit price and quantity pricing for MCP6031-E/MC are available through the Request a Quote form on this page. The exact MPN is identified as a single-channel, rail-to-rail 8-DFN precision amplifier by Microchip and its authorized distribution records. Submit the required quantity, packaging preference, and target date so the quotation reflects current inventory, lead time, and order terms.
What is the lead time and stock status for MCP6031-E/MC?
Request current stock, minimum order quantity, and lead time for MCP6031-E/MC using the Request a Quote form on this page. Availability can vary with order quantity, scheduled delivery date, and packaging format. The device is an active single-channel 8-DFN operational-amplifier ordering, and the exact manufacturer part number should be included in the request to prevent quotation against a related package or reel designation.
Does MCP6031-E/MC meet RoHS and automotive qualification requirements?
RoHS and AEC-Q100 status for MCP6031-E/MC should be confirmed from the current Microchip material-declaration and qualification records before production release. The available manufacturer information identifies the MCP6031 as an advanced-CMOS precision operational amplifier, but it does not establish the requested compliance declarations. Use the manufacturer’s compliance documentation and, where required by the customer specification, request the appropriate material and quality records before approving the device for a regulated product.

Dữ liệu tham khảo kỹ thuật cho MCP6031-E/MC — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose MCP6031-E/MC for a compact, low-power analog design that needs one precision amplifier, a gain-bandwidth product of 10 kHz, typical operating current of 900 nA, and a maximum input offset voltage of 150 µV. Its 8-DFN 2 mm × 3 mm package is especially useful where board area is constrained, although the exposed pad and fine-pitch assembly require careful PCB planning. MCP6032-E/MC is the appropriate family choice when two channels are required, and MCP6033-E/MC serves four-channel designs; neither is a direct substitute for the one-channel MCP6031-E/MC. MCP6031-E/SN may simplify hand assembly because it uses a leaded package, but its footprint is not interchangeable with the 8-DFN target. No cross-manufacturer drop-in replacement with verified pin compatibility and equivalent electrical characteristics is established here. For new production designs, confirm package availability, lifecycle status, and electrical performance against the current manufacturer documentation before freezing the BOM.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này
Brand Microchip Technology
Package 8-DFN, 2 mm × 3 mm
Channel Count 1 channel
Gain-Bandwidth Product 10 kHz
Minimum Supply Voltage 1.8 V
Maximum Supply Voltage 18 V
Typical Operating Current 900 nA
Maximum Input Offset Voltage 150 µV
Input and Output Swing Rail-to-rail
Process Technology Advanced CMOS

Ghi chú thiết kế

Use the manufacturer’s 8-DFN land pattern and connect the exposed pad as directed in the MCP6031/2/3/4 Data Sheet DS20002041C. Place input, output, bypass, and compensation components close to their associated pins, and route high-impedance input nodes away from switching nodes and the exposed-pad connection. Because the package is only 2 mm × 3 mm, assembly capability and land-pattern tolerances should be reviewed before committing to the footprint.

Design the supply rail to remain within the manufacturer’s operating limits and provide the recommended bypass capacitance at the device. The 1.8 V minimum supply supports low-voltage operation, but rail-to-rail performance does not remove the need to verify the exact common-mode and output-swing limits. Account for the amplifier’s 900 nA typical operating current when calculating standby consumption, and account separately for load current, bias paths, and any external reference or sensor current.

Do not select this amplifier for signals requiring bandwidth substantially above its 10 kHz gain-bandwidth product. Also do not assume the full input or output range is usable under every load and supply condition. For sensitive measurements, evaluate offset voltage across temperature, input bias current, output-noise contributions, and source impedance. Use the family data sheet for recommended resistor values and stability conditions, especially when driving capacitive loads or operating near the supply rails.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Obtain the current RoHS, REACH, conflict-minerals, lead-free, and quality declarations from Microchip Technology before production release. The available product records establish the amplifier and package but do not state the requested compliance conclusions.

Dữ liệu được xác minh vào: 2026-11-15 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

mcp6031 datasheet MCP6031-E/MC datasheet MCP6031-E/MC pinout MCP6031-E/MC application circuit MCP6031-E/MC equivalent MCP6031-E/MC replacement MCP6031-E/MC cross reference MCP6031-E/MC footprint MCP6031-E/MC price MCP6031-E/MC stock Microchip MCP6031-E/MC MCP6031 10kHz 900nA op amp MCP6031 8-DFN pinout MCP6031-E/MC vs MCP6032-E/MC

Các bộ phận và thuật ngữ liên quan

Microchip Technology MCP6031-E/MC MCP6031 MCP6032 MCP6033 MCP6031T-E/MC MCP6031-E/SN operational amplifier precision amplifier analog amplifier analog IC semiconductor CMOS rail-to-rail input rail-to-rail output gain-bandwidth product input offset voltage quiescent current 8-DFN DFN family surface mount SMD battery-powered applications sensor signal conditioning precision current sensing
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ