MCP6031-E/MC - 10kHz Low-Power Precision Op Amp | Microchip
부품 번호: MCP6031-E/MC ✓ 활성MCP6031-E/MC 개요
An operational amplifier is a voltage-gain element used in feedback-based analog circuits. The MCP6031 belongs to the broader hierarchy of operational amplifier, analog amplifier, analog IC, and semiconductor. Its low-power CMOS implementation, rail-to-rail input and output capability, and precision-oriented offset characteristics make it particularly useful when signal conditioning must coexist with strict battery-life or board-area constraints.
Three headline characteristics define the MCP6031-E/MC. Its 10 kHz gain-bandwidth product supports low-frequency closed-loop amplification and filtering, while its typical 900 nA operating current reduces the power burden in continuously powered equipment. The maximum input offset voltage of 150 µV supports accurate sensing of low-level signals. Rail-to-rail input and output operation provides usable input and output ranges near the supply rails in the manufacturer’s stated operating conditions.
The MCP6031 uses Microchip’s advanced CMOS technology, which provides low bias current, high open-loop gain, low operating current, and rail-to-rail input and output swing. These characteristics are especially valuable in battery-powered instrumentation where amplifier current can dominate the standby budget. The 8-DFN package also reduces PCB footprint, although its exposed thermal pad and fine-pitch leads require careful PCB layout and assembly planning.
Typical applications include portable sensor interfaces, low-power battery monitoring, medical-device signal conditioning, industrial process measurement, low-level current sensing, and general-purpose precision analog modules. In each case, the 10 kHz bandwidth is sufficient for slow sensor and control signals rather than high-speed waveform processing.
Design around the device’s low-speed operating range and confirm stability, output-current capability, capacitive-load behavior, and input-bias-current requirements from the manufacturer datasheet. Place the exposed pad on a suitable ground plane, maintain the recommended bypass-capacitor arrangement, and validate noise performance in the complete analog system rather than relying on the amplifier alone.
This product page combines manufacturer specifications, package information, verified pricing records, engineering-oriented application guidance, and clearly qualified replacement considerations. It helps engineers distinguish functional family members from true pin-compatible drop-in alternatives while making the principal design tradeoffs explicit.
드롭인 대체품: MCP6031-E/MC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청MCP6031-E/MC 최대 정격 & 전기적 특성
| Amplifier Type | Single general-purpose precision operational amplifier |
| Number of Channels | 1 channel |
| Gain-Bandwidth Product | 10 kHz |
| Minimum Single-Supply Voltage | 1.8 V |
| Maximum Single-Supply Voltage | 18 V |
| Input Offset Voltage | 150 µV maximum |
| 대기 전류 | 900 nA typical |
| Input Common-Mode Range | Rail-to-rail input |
| Output Swing | Rail-to-rail output |
| Process Technology | Advanced CMOS |
| 패키지 | 8-DFN, 2 mm × 3 mm |
| Exposed Thermal Pad | Present |
| 실장 유형 | Surface mount |
| Temperature Grade | Extended-temperature grade |
MCP6031-E/MC 8-dfn, 2 mm × 3 mm 핀 구성 가이드
MCP6031-E/MC(8-dfn, 2 mm × 3 mm 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: MCP6031-E/MC.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MCP6031-E/MC 적합 용도: 6 애플리케이션s: Battery-Powered Sensor Conditioning, Portable Medical Monitoring, Industrial Process Measurement, Low-Power Current Sensing, Precision Bridge Signal Conditioning, Low-Power IoT Signal Conditioning.
Battery-Powered Sensor Conditioning
The MCP6031-E/MC fits low-level sensor interfaces because its 900 nA typical operating current minimizes standby demand and its 150 µV maximum input offset voltage supports accurate amplification of small signals. Place it in a non-inverting or differential conditioning stage powered from a regulated rail no lower than 1.8 V. Rail-to-rail input and output operation improves usable signal range in compact battery-powered products. Its 10 kHz gain-bandwidth product is appropriate for temperature, pressure, and inertial sensors with slow output bandwidth, but it should not be selected for high-speed waveform acquisition.
추천
Portable Medical Monitoring
The MCP6031-E/MC is appropriate for low-frequency medical monitoring circuits where battery life and signal accuracy are both important. Its 900 nA typical current reduces amplifier overhead, while the 150 µV maximum offset specification helps preserve accuracy when conditioning small sensor voltages. The 1.8 V minimum supply supports compact single-rail systems, and the 2 mm × 3 mm 8-DFN package reduces board area. The designer must account for the 10 kHz bandwidth limit, noise behavior, isolation requirements, and applicable medical-quality procedures for the finished instrument.
추천
Industrial Process Measurement
The MCP6031-E/MC can buffer and amplify low-frequency process signals generated by resistive or transducer-based sensors. Its 18 V maximum supply accommodates conventional industrial signal ranges, while rail-to-rail input and output operation helps use the available supply span efficiently. The 150 µV maximum offset voltage is valuable for precision measurements, and the 10 kHz bandwidth is suitable for temperature, pressure, and flow signals that change slowly. Front-end protection, grounding, filtering, and calibration remain essential when connecting field wiring to sensitive analog circuitry.
추천
Low-Power Current Sensing
The MCP6031-E/MC is suitable for amplifying the voltage generated by a current-sense element when the required signal bandwidth is below its 10 kHz gain-bandwidth product. Low bias current reduces loading of the sensed node, while the 150 µV maximum offset voltage supports accurate measurement of small differential voltages. A 1.8 V or higher single supply simplifies low-energy system integration, and the compact 8-DFN package preserves board area. Confirm input common-mode limits, output swing, bias-current effects, and layout-induced errors using the manufacturer electrical characteristics before using it above ground.
추천
Precision Bridge Signal Conditioning
The MCP6031-E/MC can serve as an amplifier element in a bridge-based measurement circuit when low offset and low current are more important than high bandwidth. Its 150 µV maximum input offset voltage and low-bias-current CMOS architecture are useful for preserving weak differential signals, while rail-to-rail operation provides flexibility in single-supply designs. The 10 kHz bandwidth is suitable for resistive load cells and temperature bridges with slowly varying outputs. Use careful resistance matching, guard routing, input filtering, and excitation-voltage regulation to prevent drift and common-mode errors from overwhelming the measurement.
추천
Low-Power IoT Signal Conditioning
The MCP6031-E/MC is appropriate for IoT sensor nodes that spend substantial time in low-power states and require a compact analog front end. Its 900 nA typical operating current is well matched to energy-conscious sensor conditioning, and the 2 mm × 3 mm 8-DFN package supports dense board layouts. A supply starting at 1.8 V permits direct operation from common low-voltage rails. Its 10 kHz bandwidth covers many environmental and occupancy sensors, but the design should avoid fast transient signals and should account for the amplifier’s input noise, offset drift, and settling behavior.
추천
추천 제품 요약
엔지니어링 참조 데이터: MCP6031-E/MC — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Brand | Microchip Technology |
| Package | 8-DFN, 2 mm × 3 mm |
| Channel Count | 1 channel |
| Gain-Bandwidth Product | 10 kHz |
| Minimum Supply Voltage | 1.8 V |
| Maximum Supply Voltage | 18 V |
| Typical Operating Current | 900 nA |
| Maximum Input Offset Voltage | 150 µV |
| Input and Output Swing | Rail-to-rail |
| Process Technology | Advanced CMOS |
설계 노트
Use the manufacturer’s 8-DFN land pattern and connect the exposed pad as directed in the MCP6031/2/3/4 Data Sheet DS20002041C. Place input, output, bypass, and compensation components close to their associated pins, and route high-impedance input nodes away from switching nodes and the exposed-pad connection. Because the package is only 2 mm × 3 mm, assembly capability and land-pattern tolerances should be reviewed before committing to the footprint.
Design the supply rail to remain within the manufacturer’s operating limits and provide the recommended bypass capacitance at the device. The 1.8 V minimum supply supports low-voltage operation, but rail-to-rail performance does not remove the need to verify the exact common-mode and output-swing limits. Account for the amplifier’s 900 nA typical operating current when calculating standby consumption, and account separately for load current, bias paths, and any external reference or sensor current.
Do not select this amplifier for signals requiring bandwidth substantially above its 10 kHz gain-bandwidth product. Also do not assume the full input or output range is usable under every load and supply condition. For sensitive measurements, evaluate offset voltage across temperature, input bias current, output-noise contributions, and source impedance. Use the family data sheet for recommended resistor values and stability conditions, especially when driving capacitive loads or operating near the supply rails.
규정 준수 정보
Obtain the current RoHS, REACH, conflict-minerals, lead-free, and quality declarations from Microchip Technology before production release. The available product records establish the amplifier and package but do not state the requested compliance conclusions.